Investigation of the flow structures through heterogeneous vegetation of varying patch configurations in an open channel

Environmental Fluid Mechanics - The hydrodynamics of flow passing through heterogeneous vegetation configurations is always complex and it becomes difficult to capture the flow structures through...     

Characteristics of flow structure of free-surface flow in a partly obstructed open channel with vegetation patch

Free-surface flows over patchy vegetation are common in aquatic environments. In this study, the hydrodynamics of free-surface flow in a rectangular channel with a bed of rigid vegetation-like cylinders occupying half of the channel bed was investigated and interpreted by means of laboratory experiments and numerical simulations. The channel configurations have low width-to-depth aspect ratio (1.235 and 2.153). Experimental results show that the adjustment length for the flow to be fully developed through the vegetation patch in the present study is shorter than observed for large-aspect-ratio channels in other studies. Outside the lateral edge of the vegetation patch, negative velocity gradient (\(\partial \overline{u}/\partial z < 0\)) and a local velocity maximum are observed in the vertical profile of the longitudinal velocity in the near-bed region, corresponding to the negative Reynolds stress (\(- \overline{{u^{\prime}w^{\prime}}} < 0\)) at the same location. Assuming coherent vortices to be the dominant factor influencing the mean flow field, an improved Spalart–Allmaras turbulence model is developed. The model improvement is based on an enhanced turbulence length scale accounting for coherent vortices due to the effect of the porous vegetation canopy and channel bed. This particular flow characteristic is more profound in the case of high vegetation density due to the stronger momentum exchange of horizontal coherent vortices. Numerical simulations confirmed the local maximum velocity and negative gradient in the velocity profile due to the presence of vegetation and bed friction. This in turn supports the physical interpretation of the flow processes in the partly obstructed channel with vegetation patch. In addition, the vertical profile of the longitudinal velocity can also be explained by the vertical behavior of the horizontal coherent vortices based on a theoretical argument.     

Analytical model for vertical velocity profiles in flows with submerged shrub-like vegetation

An analytical solution for the vertical profiles of the horizontal velocity of channel flow with submerged shrub-like vegetation is investigated in this paper. At first, a shape function is proposed to fit the diameter change of different types of shrub-like vegetation. Using the momentum theorem and the mixing-length turbulence model, an analytical solution for the vertical profile of the horizontal velocity within the vegetation is obtained. The velocity distribution of the whole column is determined in tandem with the logarithmic velocity profile above the vegetation. The solution is compared with experimental data in excellent agreement. The results show that the flow above the vegetation has a logarithmic velocity profile while the flow within the vegetation is impacted greatly by the shape and density of vegetation. The flows within shrub-like vegetations are non-uniform and vary inversely with the shrub diameter.     

Double-average mean flow and local turbulence intensity profiles from PIV measurements for an open channel flow with rigid vegetation

This contribution presents particle image velocimetry measurements for an open channel stationary uniform and fully developed flow of water over a horizontal flat bed of uniform glass beads in presence of a staggered array of vertical cylindrical stems. The main objective was to explore and quantify the influence of the stems-to-flow relative submergence, h _v /h, over the mean flow and local turbulence intensities. A comparison with measurements for the non-vegetated flow over the same granular bed is presented. Results indicate a remarkable influence of h _v /h over the whole flow field. The time-average mean flow presents a strong spatial variation in the layer of the flow occupied by the stems. The local velocity fluctuations are strongly affected by the presence of the stems, with regions in between the stems where they reach peaks that are several times larger than those encountered in the flow in absence of vegetation. The turbulence intensity profiles are noticeably different when compared to those measured in the non-vegetated flow conditions. From previous works it was possible to derive an equation for the mean velocity, U _v , of the flow through the vegetated layer of height h _v . The prediction of this equation is in good agreement with the uniform value for the double-average longitudinal velocity profile in this layer. A final brief discussion about the possible impact of these vegetated-flow features on the sediment transport is presented.     

Estimation of the longitudinal dispersion coefficient using a two-zone model in a channel partially covered with artificial emergent vegetation

Environmental Fluid Mechanics - Understanding scalar transport in solvents is important in chemical engineering, pollution control, and water remediation, where the longitudinal dispersion...     

Lateral velocity distribution in open channels with partially flexible submerged vegetation

Environmental Fluid Mechanics - This study implemented three analytical models to investigate the lateral distribution of depth-averaged streamwise velocity in a rectangular channel with lateral,...     

Turbulent velocity profile in fully-developed open channel flows

The determination of velocity profile in turbulent narrow open channels is a difficult task due to the significant effects of the anisotropic turbulence that involve the Prandtl’s second type of secondary flow occurring in the cross section. With these currents the maximum velocity appears below the free surface that is called dip phenomenon. The well-known logarithmic law describes the velocity distribution in the inner region of the turbulent boundary layer but it is not adapted to define the velocity profile in the outer region of narrow channels. This paper relies on an analysis of the Navier–Stokes equations and yields a new formulation of the vertical velocity profile in the center region of steady, fully developed turbulent flows in open channels. This formulation is able to predict time averaged primary velocity in the outer region of the turbulent boundary layer for both narrow and wide open channels. The proposed law is based on the knowledge of the aspect ratio and involves a parameter C_Ar depending on the position of the maximum velocity (ξ_dip). ξ_dip may be derived, either from measurements or from an empirical equation given in this paper. A wide range of longitudinal velocity profile data for narrow open channels has been used for validating the model. The agreement between the measured and the computed velocities is rather good, despite the simplification used.     

Re-examining log law velocity profile in smooth open channel flows

Environmental Fluid Mechanics - A comprehensive investigation of velocity distribution is presented, and the log law is re-examined using experimental data from a smooth uniform open channel flow....     

A model of vertical distribution of suspended matter in an open channel flow

A quasi-stationary model of vertical distribution of concentration of suspended particular matter in the bottom layer of 1D open channel with a sloped bottom and varying free surface slope is discussed. The model proceeds from the balance between the turbulent diffusion and settling with the buoyancy flux effects on the medium turbulence neglected. The model outcome is formulated in the form of an analytic formula for the vertical distribution of concentration. It is shown that the derived formula embraces two basic types of vertical distribution of concentration, one with a monotonic decrease of concentration gradient and the other with a gradient maximum (lutocline) located at some distance from the bottom. The first distribution type realizes for a relatively large settling velocity or low intensity of turbulence and the second type for a small settling velocity or high intensity of turbulence. The skill of the model to mimic realistic situations is demonstrated on data measured in the Jiaojiang Estuary (China).     

Free surface profiles of near-critical instabilities in open channel flows: undular hydraulic jumps

Environmental Fluid Mechanics - When the Froude number F of a free-surface flow ranges between 0.3 and 3, the flow is unstable and frequently characterised by free surface undulations, with the...     

Analysis of the velocity field in a large rectangular channel with lateral shockwave

In this work the authors describe the main characteristics of the velocity field of hydraulic jumps in a very large channel where lateral shockwaves occur. Experiments were carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). Extensive flow velocity measurements were investigated in order to have a clearer understanding of both hydraulic jump development and lateral shockwave formation in a very large channel. Eight experiments were performed in a 4m wide rectangular channel; the experiments differed in the inlet Froude number F ₀ and the jump type. Seven tests were carried out with undular jumps and one with a roller jump. The flow velocity and the flow free surface measurements were taken using a two-dimensional Acoustic Doppler Velocimeter (ADV) and an ultrasonic profiler, respectively. The experimental results can be summarized as follow: (i) the formation of well developed lateral shockwaves similar to those of oblique jumps were observed; (ii) the comparison of the experimental and theoretical data shows that the classic shockwave theory is sufficiently confirmed in the analyzed range of Reynolds number, taking into account the experimental errors and the difference between the theoretical and experimental assumptions; (iii) the transversal flow velocity profiles in the recirculating zone show a good agreement with the numerical simulations presented in literature in the case of a separated turbulent boundary layer over a flat plate. This conclusion enables us to confirm the hypothesis that the lateral shockwaves in the channel are the result of a boundary layer which, as observed, forms on the channel sidewalls.     

Compound channel flow with a longitudinal transition in hydraulic roughness over the floodplains

Flows in a compound open-channel (two-stage geometry with a main channel and adjacent floodplains) with a longitudinal transition in roughness over the floodplains are experimentally investigated in an 18 m long and 3 m wide flume. Transitions from submerged dense vegetation (meadow) to emergent rigid vegetation (wood) and vice versa are modelled using plastic grass and vertical wooden cylinders. For a given roughness transition, the upstream discharge distribution between main channel and floodplain (called subsections) is also varied, keeping the total flow rate constant. The flows with a roughness transition are compared to flows with a uniformly distributed roughness over the whole length of the flume. Besides the influence of the downstream boundary condition, the longitudinal profiles of water depth are controlled by the upstream discharge distribution. The latter also strongly influences the magnitude of the lateral net mass exchanges between subsections, especially upstream from the roughness transition. Irrespective of flow conditions, the inflection point in the mean velocity profile across the mixing layer is always observed at the interface between subsections. The longitudinal velocity at the main channel/floodplain interface, denoted \(U_{int}\), appeared to be a key parameter for characterising the flows. First, the mean velocity profiles across the mixing layer, normalised using \(U_{int}\), are superimposed irrespective of downstream position, flow depth, floodplain roughness type and lateral mass transfers. However, the profiles of turbulence quantities do not coincide, indicating that the flows are not fully self-similar and that the eddy viscosity assumption is not valid in this case. Second, the depth-averaged turbulent intensities and Reynolds stresses, when scaled by the depth-averaged velocity \(U_{d,int}\) exhibit two plateau values, each related to a roughness type, meadow or wood. Lastly, the same results hold when scaling by \(U_{d,int}\) the depth-averaged lateral flux of momentum due to secondary currents. Turbulence production and magnitude of secondary currents are increased by the presence of emergent rigid elements over the floodplains. The autocorrelation functions show that the length of the coherent structures scales with the mixing layer width for all flow cases. It is suggested that coherent structures tend to a state where the magnitude of velocity fluctuations (of both horizontal vortices and secondary currents) and the spatial extension of the structures are in equilibrium.     

Spatial evolution of coherent motions in finite-length vegetation patch flow

A number of experimental studies on submerged canopy flows have focused on fully-developed flow and turbulent characteristics. In many natural rivers, however, aquatic vegetation occurs in patches of finite length. In such vegetated flows, the shear layer is not formed at the upstream edge of the vegetation patch and coherent motions develop downstream. Therefore, more work is neededz to reveal the development process for large-scale coherent structures within vegetation patches. For this work, we considered the effect of a limited length vegetation patch. Turbulence measurements were intensively conducted in open-channel flows with submerged vegetation using Particle Image Velocimetry (PIV). To examine the transition from boundary-layer flow upstream of the vegetation patch to a mixing-layer-type flow within the patch, velocity profiles were measured at 33 positions in a longitudinal direction. A phenomenological model for the development process in the vegetation flow was developed. The model decomposed the entire flow region into four zones. The four zones are the following: (i) the smooth bed zone, (ii) the diverging flow zone, (iii) the developing zone and (iv) the fully-developed zone. The PIV data also confirmed the efficiency of the mixing-layer analogy and provided insight into the spatial evolution of coherent motions.     

A semi-coupled model for determining the distribution of two-dimensional coherent structures in open channel flow

Environmental Fluid Mechanics - Mixing layers and associated large-scale turbulent structures are some of the most common features of turbulent shallow water flow. Due to their...     

Effects of secondary current and stratification on suspension concentration in an open channel flow

In this work, a mathematical model on concentration distribution is developed for a steady, uniform open channel turbulent flow laden with sediments by incorporating the effect of secondary current through velocity distribution together with the stratification effect due to presence of sediments. The effect of particle-particle interaction at reference level and the effect of incipient motion probability, non-ceasing probability and pick-up probability of the sediment particles at reference concentration are taken into account. The proposed model is compared with the Rouse equation as well as verified with existing experimental data. Good agreement between computed value and experimental data indicates that secondary current influences the suspension of particles significantly. The direction and magnitude (strength) of secondary current lead to different patterns of concentration distribution and theoretical analysis shows that type II profile (where maximum concentration appears at significant height above channel bed surface) always corresponds to upward direction and greater magnitude of secondary current.     

Influence of the secondary motions on pollutant mixing in a meandering open channel flow

This paper presents large eddy simulation of turbulent flow in a meandering open channel with smooth wall and rectangular cross-section. The Reynolds number based on the channel height is 40,000 and the aspect ratio of the cross-section is 4.48. The depth-averaged mean stream-wise velocity agree well to experimental measurements. In this specific case, two interacting cells are formed that swap from one bend to the other. Transport and mixing of a pollutant is analysed using three different positions of release, e.g. on the inner bank, on the outer bank and on the centre of the cross section. The obtained depth-average mean concentration profiles are reasonably consistent with available experimental data. The role of the secondary motions in the mixing processes is the main focus of the discussion. It is found that the mixing when the scalar is released on the centre of the cross-section is stronger and faster than the mixing of the scalar released on the sides. When the position of release is close to a bank side, the mixing is weaker and a clear concentration of scalar close to the corresponding side-wall can be observed in both cases.     

Mixing at a sediment concentration interface in turbulent open channel flow

In this work we address the role of turbulence on mixing of clear layer of fluid with sediment-laden layer of fluid at a sediment concentration interface. This process can be conceived as the entrainment of sediment-free fluid into the sediment-laden layer, or alternatively, as the transport of sediment into the top sediment-free flow. This process is governed by four parameters—Reynolds number of the flow \(Re_\tau\), non-dimensional settling velocity of the sediment (proxy for sediment size) \(\tilde{V}\), Richardson number \(Ri_\tau\) and Schmidt number Sc. For this work we have performed direct numerical simulations for fixed Reynolds and Schmidt numbers while varying the values of Richardson number and particle settling velocity. In the simple model considered here, the flow’s momentum and turbulence pre-exists over the entire layer of fluid, while the sediment is initially confined to a layer close to the bed. Mixing of sediment-free fluid with the sediment-laden layer is associated primarily with upward transport of sediment and buoyancy. There is no simultaneous upward transport of fluid momentum and turbulence into the sediment-free fluid layer, which is already in motion and turbulent. The analysis performed shows that the ability of the flow to transport a given sediment size decreases with the distance from the bottom, and thus only fine enough sediment particles are transported across the sediment concentration interface. For these cases, the concentration profiles evolve to a final steady state in good agreement with the well-known Rouse profile. The approach towards the Rouse profile happens through a transient self-similar state. This behavior of the flow is not seen for larger particles. Detailed analysis of the three dimensional structure of the sediment concentration interface shows the mechanisms by which sediment particles are lifted up by tongues of sediment-laden fluid with positive correlation between vertical velocity and sediment concentration. Finally, the mixing ability of the flow is addressed by monitoring the time evolution of the center of mass of the sediment-laden layer and the vertical location of the sediment-free/sediment-laden interface.     

The role of increasing riverbank vegetation density on flow dynamics across an asymmetrical channel

Environmental Fluid Mechanics - Over the last two decades, the role of vegetation in the environmental and ecological restoration of surface water bodies has received much attention. In this...