Biodegradation of Epoxy and MF Modified Polyurethane Films Derived from a Sustainable Resource

Mesua ferrea L. seed oil (MFLSO) modified polyurethanes blends with epoxy and melamine formaldehyde (MF) resins have been studied for biodegradation with two techniques, namely microbial degradation (broth culture technique) and natural soil burial degradation. In the former technique, rate of increase in bacterial growth in polymer matrix was monitored for 12 days via a visible spectrophotometer at the wavelength of 600 nm using McFarland turbidity as the standard. The soil burial method was performed using three different soils under ambient conditions over a period of 6 months to correlate with natural degradation. Microorganism attack after the soil burial biodegradation of 180 days was realized by the measurement of loss of weight and mechanical properties. Biodegradation of the films was also evidenced by SEM, TGA and FTIR spectroscopic studies. The loss in intensity of the bands at ca. 1735 cm⁻¹ and ca. 1050 cm⁻¹ for ester linkages indicates biodegradation of the blends through degradation of ester group. Both microbial and soil burial studies showed polyurethane/epoxy blends to be more biodegradable than polyurethane/MF blends. Further almost one step degradation in TG analysis suggests degradation for both the blends to occur by breakage of ester links. The biodegradation of the blends were further confirmed by SEM analyses. The study reveals that the modified MFLSO based polyurethane blends deserve the potential to be applicable as “green binders” for polymer composite and surface coating applications.     

Effect of γ-Dose rate on Biodegradation of γ-Sterilized Biomedical Polyolefins

The aim of the present study is to study the effect of γ-dose rate on the biodegradation of γ-sterilized polyolefins. Films of isotactic polypropylene, high density polyethylene and ethylene-propylene (EP) copolymer were sterilized under γ-radiation with doses of 10 and 25 kGy. Two different ⁶⁰Co sources were used with dose rate 600 and 780 Gy h⁻¹. Neat and sterilized samples were incubated in compost and fungal culture environments. The changes in functional groups, surface morphology and intrinsic viscosity in polymer chains were characterized by FT-IR spectroscopy, SEM and viscometric measurements, respectively. It was observed that both γ-degradation and biodegradation processes depend on the dose rate of γ-source. It was found that the biodegradation of γ-sterilized polyolefins in composting and microbial culture environments increased with decreasing the γ-dose rate.     

Volatilization and Biodegradation of VOCs in Membrane Bioreactors (MBR)

Volatilization and biodegradation are major competitive volatile organic compound (VOC) removal mechanisms in biological wastewater treatment process, which depend on compound specific properties and system design/operational parameters. In this study, a mathematical model was used to determine major removal pathways at various organic loading rates (OLR), solids residence time (SRT) and dissolved oxygen (DO) concentrations in a biological process for vinyl acetate. Model results showed that biological treatment process should be designed with long SRT, high OLR and low DO concentrations to maximize biodegradation and minimize volatilization of VOCs. Unless a VOC is toxic to microorganisms under the given conditions, low VOC emission rates are an inherent advantage of MBRs, which operate at higher OLR and longer SRT compared to conventional activated sludge process. A lab scale membrane bioreactor (MBR) was operated at varying OLR to investigate the relative volatilization and biodegradation rates for acetaldehyde, butyraldehyde and vinyl acetate. Synthetic wastewater containing three VOCs was introduced to the MBR. The DO concentration and SRT was maintained at 2.0 mg L^{− 1} and 100 days, respectively. The overall VOC removal rate was more than 99.7% for three VOCs at all the OLR. For vinyl acetate, the biodegradation rate increased from 93.87 to 99.40% and the volatilization removal rate decreased from 6.09 to 0.59% as OLR was increased from 1.1 to 2.0 kg COD m^{− 3} d^{− 1}. It was confirmed that a MBR can be a promising solution to reduce VOC emissions from wastewater.     

Accumulation of Polyhydroxyalkanoates by Rhizobacteria Underneath Nickel-Hyperaccumulators from Serpentine Ecosystem

Nickel-resistant bacteria isolated from underneath Ni-hyperaccumulators growing on serpentine soils were screened for production of polyhydroxyalkanoates. These rhizobacteria accumulated poly-3-hydroxybutyric acid [P(3HB)] accounting 3.9–67.7% of cell dry weight during growth in gluconate and/or glucose. Cupriavidus pauculus KPS 201 utilized only gluconate and accumulated about 67.7% P(3HB) while, Bacillus firmus AND 408 utilized both carbon sources for polymer synthesis. The isolates being resistant to Ni also accumulated substantial amount of P(3HB) when grown in presence of the heavy metal and this was revealed by transmission electron microscopic studies. Although B. firmus AND 408 produced only P(3HB) at higher concentrations of gluconate, C. pauculus KPS 201 synthesized copolymer of 3-hydroxybutyric acid (3HB) and 3-hydroxyvaleric acid (3HV) [P(3HB-co-3HV)]. In presence of 0.8% gluconate and 4 mM Ni, KPS 201 cells produced PHA amounting 81% CDW, which contained 76 and 24 mol% 3HB and 3HV monomers, respectively.     

Morphological and Thermal Characterization of Linseed-Oil Based Polymers from Cationic and Thermal Polymerization

Linseed oil-based polymers have been synthesized via cationic and thermal polymerization and characterized through various techniques, such as SEM, DMA, DSC and TGA. The morphology of the polymer samples after extraction reveals the smooth structure of the polymer matrix. With an increase in oil content, the morphology is observed to be more loosely bound. With an increase in linseed oil content in the samples, the room temperature storage modulus (E′) varies from 10.4 × 10⁷ to 1.8 × 10⁷ Pa. The glass transition temperatures measured through DMA of the cationic samples ranges from 70 to −6 °C and the crosslink densities range from 18.4 × 10³ to 3.4 × 10³ mol/m³. The glass transition temperatures of the thermal samples range from 106 to −4 °C and the crosslink densities range from 7.7 × 10³ to 2.4 × 10³ mol/m³. The TGA results show three stages of degradation of the polymer samples and it is also revealed that these polymers are stable up to 200 °C, showing negligible decomposition.     

Chemical Recycling of Polyamide Waste at Various Temperatures and Pressures Using High Pressure Autoclave Technique

Chemical recycling of polyamide waste in water was studied using 0.5 L high pressure autoclave at temperatures of 150, 200, 210, 220,230 and 240 °C and at various pressures of 100, 200, 300, 400, 500, 600 and 700 psi (pound per square inch). Viscosity average molecular weight of the polyamide waste sample was determined by Ostwald method and recorded as 1.928 × 10³. The reaction was found to be first order with velocity constant in order of 10⁻² min⁻¹. The velocity constant and percent conversion of depolymerization reaction at 240 °C and 700 psi pressure were recorded as 2.936 × 10⁻² min⁻¹ and 99.99% respectively. The velocity constant was obtained on the basis of measurement of amine value. Kinetic and thermodynamic parameters such as energy of activation, frequency factor, enthalpy of activation were found to be 10.6 kJ mole⁻¹, 0.3719 min⁻¹ and 6.3 kJ mole⁻¹ respectively, at the optimum conditions for maximum depolymerization of polyamide waste.     

Fouling and Degradation of Polycarbonate in Seawater: Field and Lab Studies

Biofouling and ensuing microbial mediated degradation of Bisphenol A polycarbonate was studied by immersing the samples in sea water of Bay of Bengal (Chennai, India) for 3 months and also under controlled laboratory conditions with marine mixed microbial consortia for 12 months. A 9% weight loss in the sample was observed after 1 year of incubation under in vitro laboratory conditions. A 5% reduction in number average molecular weight and an additional oligomer with a molecular weight of 930 was observed in the same sample. Contact angle decreased by 11% indicating an increase in the surface hydrophilicity. The specific heat decreased by 44% and glass transition temperature decreased by 3 °C with respect to the control indicating chain scission. Formation of new hydroxyl groups and cleavage of carbonate bonds in polycarbonate suggested biodegradation. About 9 μg mL⁻¹ of Bisphenol A, a monomer of polycarbonate, as well as its oxidized products were detected in the supernatant. The nature of degradation in field and in vitro was different. It was predominantly oxidation in the former and hydrolysis in the later environment. A strain exhibiting hydrolase activity was isolated at the end of the 12 months from the in vitro mixed consortia and was identified, based on biochemical and 16S rDNA tests, as Pseudomonas sp. BP2 (GenBank accession no. EU920674).     

Biodegradable Polyesters and Polyamides From Difunctionalized Lauric and Coconut Fatty Acids

In this work, a major fatty acid from coconut oil was used as starting material in preparing biodegradable polymers. Thus, polyesters and polyamides from varying proportions of monomers, hydroxy- and amino- derivatives of lauric acid were synthesized. Initially, the derivatives were prepared by regioselective chlorination of lauric acid, in the presence of ferrous ions in strong acid medium. Subsequent hydroxylation and amination procedures yielded the hydroxy- and amino- derivatives of lauric acid. These monomers were polymerized in a reaction tube by simple polycondensation method at 220–230 °C for 6–8 h without catalyst. Molecular weight determination using –COOH by end group titration and gel permeation chromatography (GPC) gave an average molar mass of 3,000–5,000 g mol⁻¹ with n = 15–25 monomer units. Thermal properties such as glass transition (T_g) and decomposition (T_d) temperatures were obtained using differential scanning calorimetry (DSC). The same processes of synthesis and determinations above were applied to coconut fatty acids, derived from saponification of coconut oil, and resulted to very similar conclusions. A quick biodegradation assay against fungus Aspergillus niger UPCC 4219 showed that the polymers prepared are more biodegradable than conventional plastics such as polypropylene, poly(ethyleneterepthalate) and poly(tetrafluoroethylene) but not as biodegradable as cellulosic (newsprint) paper.     

Synthesis of Alkyd Resin from Non-Edible Jatropha Seed Oil

The kinetics of polyesterification of glycerol, phthalic anhydride and jatropha oil leading to the formation of alkyd resins were studied. A series of alkyd resins having different amount of jatropha oil viz., 40–80% have been prepared by employing two stage alcoholysis-polyesterification process. The extent of reaction and average degree of polymerisation were calculated from the end group analysis of the reaction mixture withdrawn at regular intervals of time. The initial reaction rates followed the second order kinetics and thereafter deviations were observed. An appreciable degree of conversion was noticed from the extent of the reaction which lies in the range of 49.5–62.5%. The average degree of polymerisation calculated in the region of deviation from second order suggested the occurrence of chain branching at relatively shorter intervals along the polymer chain. The second order rate constants were found to be of the order of 10⁻⁵ g (mg KOH)⁻¹ min⁻¹.     

Kinetics and Thermodynamics of Hydrolytic Depolymerization of Polyamide Waste at Various Temperature and Autogenious Pressure by High-Pressure Autoclave

Hydrolytic depolymerization of polyamide waste in water was studied using 0.5 L high pressure autoclave at temperatures of 235, 240, 245, 250 °C and at autogenious pressure 480, 500, 520, and 600 psi (pound per square inch).The reaction rate constant, energy of activation, enthalpy of activation, entropy of activation and equilibrium constant were calculated from the experimental data obtained. The maximum depolymerization (59.2%) of polyamide waste into monomer caprolactum was obtained at 250 °C and 600 psi pressure. The reaction rate constant was obtained on basis of measurement of amine value and residual weight. The depolymerization reaction was found to be pseudo first order with reaction rate constant of the order of 10⁻³ min⁻¹. The enthalpy, entropy and free energy of activation were recorded as 85.75, −0.1354 and 156.59 kJ mol⁻¹ respectively at the experimental conditions for maximum depolymerization of polyamide waste. The thermodynamic equilibrium constant for this hydrolysis reaction was found to be 2.3 × 10⁻¹⁶.     

A Comparative Study of Pectin Extracted from Passion Fruit Rind Flours

Brazil is the world’s main producer of passion fruit. Previous reports show that passion fruit rinds, an industrial waste, contain large amounts of pectin. Pectin is a dietary fiber that is widely used in the food industry as a gelling agent and stabilizer. In this study, the quality and characteristics of pectin extracted from yellow passion fruit rind flour was investigated. Pectin was extracted from both commercially available and prepared passion fruit peels using nitric acid. Once extracted, the pectin was evaluated for its molecular characteristics and chemical composition as well as for the apparent and reduced viscosity of the gel. Prepared (blanched) rind flour yielded 203.4 g kg⁻¹ of pectin, which contained a uronic acid content of 681 mg g⁻¹, a degree of esterification of 80, a degree of methylation of 80, a reduced viscosity of 6.8 dL g⁻¹ and an apparent viscosity of 13.4 cP. The results suggest a clear influence of the raw material on it’s the resultant characteristics of the pectin. In addition, our results show that therheological properties and molar characteristics of pectin were negatively affected when the rind flours were subjected to high temperatures. Pectin methyl esterase activity was detected in the freeze-dried, unblanched raw material. Extensive efforts have been directed towards minimizing waste and the reported results show that high quality pectin can be obtained from passion fruit rinds, an industrial waste product of passion fruit processing.     

Suspension Polymerization of Poly(l-lactide-co-p-dioxanone) in Supercritical Carbon Dioxide

Biodegradable copolymers of l-lactide(l-LA) and p-dioxanone(PDO) were synthesized in supercritical carbon dioxide (scCO₂) with stannous octoate as the ring-opening catalyst and a fluorocarbon polymer surfactant as an stabilizer. Fine powderous products were achieved when more than 90% (w/w) l-LA was fed. Scanning electron micrographic images and laser diffraction particle size analysis of the products showed the mean diameter of particles greatly increased as the content of PDO increased. The obtained polymers had the number-average molecular weights ranging from 15,000 to 26,000 g mol⁻¹ (polydispersity index ranging from 1.3 to 2.1) according to the gel permeation chromatography measurements. The polymer structure was characterized by NMR spectroscopy, indicating the formation of copolymers. Thermal properties of the obtained polymers investigated using differential scanning calorimetry showed that the morphology of products was directly relevant to the crystallinity of the copolymers. The polymerization of l-LA and PDO copolymers in scCO₂ is also proposed as a novel production technique for high-purity, biodegradable polymers.     

Topographical imaging as a means of monitoring biodegradation of poly(hydroxyalkanoate) films

Poly(hydroxyalkanoates) (PHAs) are a class of bacterially-derived polymers that are naturally biodegradable through the action of extracellular depolymerase enzymes secreted by a number of different bacteria and fungi. In this paper we describe the development of topographical imaging protocols (by both scanning electron microscopy; SEM, and confocal microscopy; CM) as a means of monitoring the biodegradation of solution cast films of poly(3-hydroxybutanoate-co-3-hydroxyhexanoate) (P3HB/3HHx) and medium-chain-length (mcl-) PHA. Pseudomonas lemoignei and Comamonas P37C were used as sources for PHA depolymerase enzymes as these bacteria are known to degrade at least one of the polymers in question. SEM revealed the bacterial colonization of the film surfaces while CM permitted the comparative assessment of the roughness of the film surfaces upon exposure to the two bacterial strains. By dividing the total surface area of the film (A′) by the total area of the scan (A) it was possible to monitor biodegradation by observing differences in the topography of the film surface. Prior to inoculation, P3HB/3HHx films had an A′/A ratio of 1.06. A 24-h incubation with P. lemoignei increased the A′/A ratio to 1.47 while a 48- and 120-h incubation with Comamonas resulted in A′/A ratios of 1.16 and 1.33, respectively. These increases in the A′/A ratios over time demonstrated an increase in the irregularity of the film surface, indicative of PHA polymer breakdown. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Effects of Nitrogen Deposition on Bryophyte Species Composition of Calcareous Grasslands

Regular additions of NH₄NO₃ (35–140 kg N ha⁻¹ yr⁻¹) and (NH₄)₂SO₄ (140 kg N ha⁻¹ yr⁻¹) to a calcareous grassland in northern England over a period of 12 years have resulted in a decline in the frequency of the indigenous bryophyte species and the establishment of non-indigenous calcifuge species, with implications for the structure and composition of this calcareous bryophyte community. The lowest NH₄NO₃ additions of 35 kg N ha⁻¹ yr⁻¹ produced significant declines in frequency of Hypnum cupressiforme, Campylium chrysophyllum, and Calliergon cuspidatum. Significant reductions in frequency at higher NH₄NO₃ application rates were recorded for Pseudoscleropodium purum, Ctenidum molluscum, and Dicranum scoparium. The highest NH₄NO₃ and (NH₄)₂SO₄ additions provided conditions conducive for the establishment of two typical calcifuges – Polytrichum spp. and Campylopus introflexus, respectively. Substrate-surface pH measurements showed a dose-related reduction in pH with increasing NH₄NO₃ deposition rates of 1.6 pH units between the control and highest deposition rate, and a further significant fall in pH, of >1 pH unit, between the NH₄NO₃ and (NH₄)₂SO₄ treatments. These results suggest that indigenous bryophyte composition may be at risk from nitrogen deposition rates of 35 kg N ha⁻¹ yr⁻¹ or less. These effects are of particular concern for rare or endangered species of low frequency.     

Relationship Between the Sediment Geochemistry and Phosphorus Fluxes in a Great Lakes Coastal Marsh,Cootes Paradise,ON, Canada

Cootes Paradise is a coastal wetland, adjacent to Hamilton Harbour at the western tip of Lake Ontario. The marsh has been considerably degraded due to the excessive sediment and nutrient input from sewage treatment plants (STPs), marsh tributaries and Combined Sewer Overflows (CSOs). Although there has been reduction in nutrient loadings from external sources, high nutrient levels, and a prolific algal growth remain a problem in Cootes Paradise. To assess the importance of external versus internal nutrient loadings to the marsh, nutrient fluxes from sediments were estimated using porewater profiles at three locations from 2001 and five additional sites from 2002. The fluxes varied between 0.27 and 5.25 mg P m⁻² day⁻¹, with sites receiving outfalls of STP and CSO having highest fluxes (∼5 mg P m⁻² day⁻¹). Mean phosphorus release rate of 2.02 mg P m⁻² day⁻¹ was calculated from the spatial distribution of the non-apatite inorganic phosphorus (NAI-P) in sediments, employing a relationship between the NAI-P and P fluxes. The results confirm that sediment P geochemistry is important in regulating the P pool in porewater which, consequently, governs the P fluxes from sediments.     

Degradation of Poly(3-hydroxybutyrate) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Some Soil Aspergillus spp.

Systematic screening of 45 soil fungi for degradation polyhydroxyalkanoic acids (PHAs) has led to the selection of 6 potent Aspergillus isolates belonging to A. flavus, A. oryzae, A. parasiticus, and A. racemosus. Degradation of PHAs as determined by tube assay method revealed that these Aspergillus spp. were more efficient in degrading poly(3-hydroxybutyrate) [P(3HB)] compared to copolymer of 3-hydroxybutyric acid and 3-hydroxyvaleric acid (P3HB-co-16% 3HV). Moreover, the extent of degradation in mineral base medium was much better than those in complex organic medium. For all the Aspergillus spp. tested, maximum degradation was recorded at a temperature of 37°C with significant inhibition of growth. The optimum pH range for degradation was 6.5–7.0 with degradation being maximum at pH 6.8. The extent of polymer degradation increased with increase in substrate concentration, the optimum concentration for most of the cultures being 0.4% and 0.2% (w/v) for P(3HB) and P(3HB-co-16%3HV) respectively. Supplementation of the degradation medium with additional carbon sources exerted significant inhibitory effect on both P(3HB) and P(3HB-co-16%3HV) degradation.     

Effect of Sediment Humic Substances on Sorption of Selected Endocrine Disruptors

Characterizing sorption processes is essential to understand the environmental distribution and toxicity potential of endocrine disruptors in terrestrial and aquatic systems. The sorption behaviors of three endocrine disruptors (bisphenol A (BPA), 17β-estradiol (E2), and 17α-ethynylestradiol (EE2)) on sediments were investigated using batch techniques. Samples were taken from some representative reaches in several major Chinese rivers. More attention has been paid to the effect of sediment organic components on the sorption of BPA, E2, and EE2. The results show that the sediment organic carbon-normalized partition coefficients (K _oc (sed)) for three endocrine disruptors are in the order of EE2 > E2 > BPA, which corresponds to the octanol-water partitioning coefficients (logK _ow) of the compounds. Moreover, the K _oc values for humic substances (K _oc (hs)) are comparable with the K _oc (sed) values and highly dependent on the physico-chemical properties of humic substances in sediments. The UV absorptivity at 272 nm (A ₂₇₂), which suggests the abundance of aromatic rings in humic substance structure, correlates well with the K _oc (hs) values. In addition, the infrared spectra of the humic substances extracted from sediments show four strong bands centered at 3,400 cm⁻¹, 1,625 cm⁻¹, 1,390 cm⁻¹, and 1,025 cm⁻¹. The K _oc (hs) values have a positive linear relation with the peak area ratio for peak at 1,025 cm⁻¹ and a negative linear relation with the peak area ratio between peaks at 1,625 cm⁻¹ and 1,025 cm⁻¹. Hence, the hydrogen bonds play a critical role to the sorption of selected endocrine disruptors.     

Trends in Chemical Composition of Wet-only Precipitation at Rural French Monitoring Stations Over the 1990–2003 Period

The long-term monitoring of precipitation and its chemical composition are important for identifying trends in rain quality and for assessing the effectiveness of pollution control strategies. A statistical test has been used to the atmospheric concentrations measured in the French rural monitoring network (MERA) in order to bring out spatio-temporal trends in precipitation quality in France over the period 1990–2003. The non-parametric Mann–Kendall test which has been developed for detecting and estimating monotonic trends in the time series was used and applied in our study at annual values of wet-only precipitation concentrations. The emission data suggest that SO₂ and NO _x emissions decreased (−3.3 and −2.0% year⁻¹, respectively) contrary to NH₃ emissions that increased slightly (+0.2% year⁻¹) over the period 1990–2002 in France. On the national scale, the pH values have a significant decreasing trend of −0.025 ± 0.02 unit pH year⁻¹. and concentrations in precipitation have a significant decreasing trend, −3.0 ± 1.6 and −3.3 ± 0.6% year⁻¹, respectively, corresponding with the downward trends in SO₂ emissions in France (−3.3% year⁻¹). A good correlation (R ² = 0.84) between SO₂ emissions and concentrations was obtained. The decreasing trend of was more significant (−5.4 ± 5.2% year⁻¹) than that of (−1.3 ± 2.4% year⁻¹). Globally, the concentration of the major ions showed a clear downward trend including marine and alkaline ions. In addition, the relative contribution of HNO₃ to acidity precipitation increased by 51% over the studied period.     

Sonophotocatalytic Degradation of Chitosan in the Presence of Fe(III)/H2O2 System

The degradation of chitosan by means of ultrasound irradiation and its combination with homogeneous photocatalysis (photo-Fenton) was investigated. Emphasis was given on the effect of additive on degradation rate constants. 24 kHz of ultrasound irradiation was provided by a sonicator, while an ultraviolet source of 16 W was used for UV irradiation. To increase the efficiency of degradation process, degradation system was combined with Fe(III) (2.5 × 10⁻⁴mol/L) and H₂O₂ (0.020–0.118 mol/L) in the presence of UV irradiation and the rate of degradation process change from 1.873 × 10⁻⁹−6.083 × 10⁻⁹ mol^1.7 L s⁻¹. Photo-Fenton process led to complete chitosan degradation in 60 min with the rate increasing with increasing catalyst loading. Sonophotocatalysis in the presence of Fe(III)/H₂O₂ was always faster than the respective individual processes. A synergistic effect between ultrasound and ultraviolet irradiation in the presence of Fenton reagent was calculated. The degraded chitosans were characterized by X-ray diffraction (XRD), gel permeation chromatography (GPC) and Fourier transform infrared (FT-IR) spectroscopy and average molecular weight of ultrasonicated chitosan was determined by measurements of intrinsic viscosity of samples. The results show that the total degree of deacetylation (DD) of chitosan change, partially after degradation and the decrease of molecular weight led to transformation of crystal structure. A negative order for the dependence of the reaction rate on total molar concentration of chitosan solution within the degradation process was suggested. Results of this study indicate that the presence of catalyst in the reaction medium can be utilized to reduce molecular weight of chitosan while maintaining the power of irradiated ultrasound and degree of deacetylation.