Contamination of Canadian and European bottled waters with antimony from PET containers

Using clean lab methods and protocols developed for measuring Sb in polar snow and ice, we report the abundance of Sb in fifteen brands of bottled water from Canada and forty-eight from Europe. Comparison with the natural abundance of Sb in pristine groundwaters, water bottled commercially in polypropylene, analyses of source waters prior to bottling, and addition of uncontaminated groundwater to PET bottles, provides unambiguous evidence of Sb leaching from the containers. In contrast to the pristine groundwater in Ontario, Canada containing 2.2 +/- 1.2 ng l(-1) Sb, 12 brands of bottled natural waters from Canada contained 156 +/- 86 ng l(-1) and 3 brands of deionized water contained 162 +/- 30 ng l(-1); all of these were bottled in PET containers. Natural water from Ontario bottled in polypropylene contained only 8.2 +/- 0.9 ng l(-1). Comparison of three German brands of water available in both glass bottles and PET containers showed that waters bottled in PET contained up to 30 times more Sb. To confirm that the elevated Sb concentrations are due to leaching from the PET containers, water was collected in acid-cleaned LDPE bottles from a commercial source in Germany, prior to bottling; this water was found to contain 3.8 +/- 0.9 ng l(-1) Sb (n = 5), compared with the same brand of water purchased locally in PET bottles containing 359 +/- 54 ng l(-1) (n = 6). This same brand of water in PET bottles, after an additional three months of storage at room temperature, yielded 626 +/- 15 ng l(-1) Sb (n = 3). Other German brands of water in PET bottles contained 253-546 ng l(-1) Sb (n = 5). The median concentration of Sb in thirty-five brands of water bottled in PET from eleven other European countries was 343 ng l(-1) (n = 35). As an independent check of the hypothesis that Sb is leaching from PET, the pristine groundwater from Canada (containing 2.2 +/- 1.2 ng l(-1) Sb) was collected from the source using PET bottles from Germany: this water contained 50 +/- 17 ng l(-1) Sb (n = 2) after only 37 days, even though it was stored in the refrigerator, and 566 ng l(-1) after six months storage at room temperature.     

The Quality of Potable Water Types in Jordan

Four different potable water types: tap water, desalinated water in private plants, homes filtrated and sealed bottled water were collected from four provinces in Jordan and analyzed for various physiochemical parameters and trace metals content. The results showed that quality of potable water varied depending on many factors such as: water quality at source, types of purification system, and the storage methods. None of the analysed parameters exceeded the national and international guideline for potable water except Nickel (Ni). The maximum concentration of Ni was found in tap water which can be attributed as network distribution system and metal storage tanks influences. The highest levels of salinity was evident in tap water. Potable water produced at homes using different types of purification systems indicated lowest levels of salinity. Minor variations in physiochemical parameters and trace metal contents were found between local and imported bottled water brands.     

Detection of bacterial endotoxin in drinking tap and bottled water in Kuwait

This study was carried out to measure and compare the concentration of bacterial endotoxin in a variety of samples from drinking tap and bottled water available in Kuwait by using the Limulus Amoebocyte lysate test. A total of 29 samples were tested. Samples were collected from a variety of locations throughout the six governorates of Kuwait and 23 brands of local and imported bottled water samples were collected from the local market. The concentration of bacterial endotoxin was measured by using the standard Limulus Amoebocyte lysate test, gel clot method. This study showed that measured endotoxin concentrations in tap drinking water varied from 2.4 to 33.8?EU/ml with the average endotoxin concentration of 14.2?EU/ml. While the results of endotoxin concentrations in the bottled water were <0.03 to 20.1?EU/ml with an average of 1.96?EU/ml. The average concentration of endotoxin in bottled water is 13.5 % of the average concentration of endotoxin in tap drinking water. This experimental investigation has proved that drinking bottled water has less endotoxin as compared to tap water in Kuwait. It is also demonstrated that the endotoxin concentration did not exceed the acceptable level in drinking tap water.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Trace metal levels in fruit juices and carbonated beverages in Nigeria

Trace metal levels in selected fruit juices and carbonated beverages purchased in Lagos, Nigeria were determined using atomic absorption spectrophotometer (Unicam model 969) equipped with SOLAAR 32 windows software. Fruit juices analysed were grape, pineapple, apple, orange, lemon juices and their brand names were used. Some carbonated drinks were also evaluated for metal levels. Trace metals investigated were Cr, Cu, Pb, Mn, Ni, Zn, Sn, Fe, Cd and Co. Trace metal contents of fruit juices were found to be more than the metallic contents of carbonated beverages. Pb level in the fruit juices ranged from 0.08 to 0.57 mg/l but was not detected in the carbonated drinks. Concentrations of Pb in lemon juice and Mn in pineapple juice were relatively high. Cd and Co were not detected in the selected juices and beverages. Additionally, Pb, Cu, Cr and Fe were not detected in canned beverages but were present in bottled beverages. However, the metal levels of selected fruit juices and carbonated beverages were within permissible levels except for Mn in pineapple juice and Pb in lemon juice.     

Determination of some heavy metal levels in soft drinks on the Ghanaian market using atomic absorption spectrometry method

Twenty-three soft drink samples (i.e., four pineapple-based fruit drinks, eight citrus-based fruit juices, one soya-based drink, three cola carbonated drinks, one apple-based fruit drink, and six cocktail fruit drinks) were randomly purchased from retail outlets in an urban market in Accra and analyzed for the concentrations of iron, cobalt, cadmium, zinc, lead, and copper using flame atomic absorption spectrometry. The mean concentration of iron and cadmium were 0.723?±?0.448 mg/L and 0.032?±?0.012 mg/L, respectively. The mean cobalt concentration was 0.071?±?0.049 mg/L, while the mean Zn concentration in the samples was 0.060?±?0.097 mg/L. The mean concentrations of Pb and Cu in the fruit juice samples were 0.178?±?0.091 mg/L and 0.053?±?0.063 mg/L respectively. About 78 % of the samples exceeded the United States Environmental Protection Agency (USEPA) maximum contaminant level of 0.3 mg/L prescribed for iron, whereas all the samples exceeded the USEPA maximum contaminant level of 0.005 mg/L prescribed for cadmium. About 91 % of the samples exceeded the EU maximum contaminant level prescribed for lead insoft drinks.     

Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).     

绍兴市典型印染废水中重金属锑排放现状及排放源调查

分析和统计的86家印染工业企业当中,废水总排口中的总锑超标率为25.6%,质量浓度0.050 mg/L以下较低排放浓度所占比例最大,达62.8%。印染废水锑排放源主要有涤棉和涤纶化纤类布料的染色、印花工艺废水,碱减量工艺废水等,工业液碱、废酸以及硫酸铝污水处理剂等原料当中含锑浓度较高。印染废水经污水处理厂集中纳管深度处理后,锑排放浓度较低,锑去除效率最高达到88.0%,大大降低了环境地表水体锑污染的风险。     

Gravimetric and Chemical Features of Airborne PM10 AND PM2.5 in Mainland Portugal

This paper describes concentration amounts of arsenic (As), particulate mercury (Hg), nickel (Ni) and lead (Pb) in PM₁₀ and PM_2.5, collected since 1993 by the Technological and Nuclear Institute (ITN) at different locations in mainland Portugal, featuring urban, industrial and rural environments, and a control as well. Most results were obtained in the vicinity of coal- and oil-fired power plants. Airborne mass concentrations were determined by gravimetry. As and Hg concentrations were obtained through instrumental neutron activation analysis (INAA), and Ni and Pb concentrations through proton-induced X-ray emission (PIXE). Comparison with the EU (European Union) and the US EPA (United States Environmental Protection Agency) directives for Ambient Air has been carried out, even though the sampling protocols herein – set within the framework of ITN's R&D projects and/or monitoring contracts – were not consistent with the former regulations. Taking this into account, 1) the EU daily limit for PM₁₀ was exceeded a few times in all sites except the control, even if the number of times was still inferior to the allowed one; 2) the EU annual mean for PM₁₀ was exceeded at one site; 3) the EPA daily limit for PM_2.5 was exceeded one time at three sites; 4) the EPA annual mean for PM_2.5 was exceeded at most sites; 5) the inner-Lisboa site approached or exceeded the legislated PMs; 6) Pb levels stayed far below the EU limit value; and 7) concentrations of As, Ni and Hg were also far less than the reference values adopted by EU. In every location, Ni appeared more concentrated in PM_2.5 than in coarser particles, and its levels were not that different from site to site, excluding the control. The highest As and Hg concentrations were found in the neighbourhood of the coal-fired, utility power plants. The results may be viewed as a “worst-case scenario” of atmospheric pollution, since they have been obtained in busy urban-industrial areas and/or near major power-generation and waste-incineration facilities.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Exposure assessment of endocrine disruptors in bottled drinking water of Lebanon

Bisphenol A (BPA) is a commonly used monomer in various products including bottled water. Numerous studies have reported endocrine adverse effects and neoplasia associated with BPA exposure in animals. However, considerable discrepancies exist among these studies with respect to both the nature of the toxic effects and the threshold dose. In Lebanon, 19-L polycarbonate (PC) bottles of drinking water are widely used in urban areas. The present study aims at assessing BPA human exposure and associated health risks from drinking water in Lebanese. A total of 22 bottled water sources, packaged in PC, were identified from licensed and non-licensed sources. Water samples were analyzed following exposure to sunlight for 72 h. BPA in water was quantified by HPLC, and other potential organic pollutants were screened by GC/MS. Fifty-nine percent of samples showed BPA levels above detection limits (>0.05 ng/mL). The median BPA level was 0.1 ng/mL (range 0.05 to 1.37 ng/mL). The mean BPA level for the total number of samples was 0.169 ng/mL (±0.280). A higher mean BPA level was found in water from licensed companies compared to non-licensed sources, however, not statistically significant. Screening showed the presence of dibutyl-phthalate and dioctyl-phthalate in only two samples. Endocrine disruptors (EDR) are ubiquitous contaminants in bottled water in Lebanon with potential health risk implications. Although estimated exposure levels are below the reference dose (RfD), further studies are needed to quantitate exposure from various sources and to investigate EDR contribution to existing epidemics in the country.     

Monitoring of copper,arsenic and antimony levels in agricultural soils impacted and non-impacted by mining activities,from three regions in Chile

This paper reports a comparative study of the concentration of three important environmental elements that are often found together in mineral deposits and then associated with mining activities; copper, arsenic and antimony. These elements were determined in 26 different agricultural soils from regions I, II and V in Chile, zones where the most important and biggest copper industries of this country are located. As background levels of these elements in soils have not been well established, in this study, both, impacted and non-impacted agricultural soils from different regions were considered. The relationships between the concentrations of these elements in soils were also examined. The concentration ranges for copper, arsenic and antimony were 11-530; 2.7-202 and 0.42-11 mg kg(-1) respectively. The copper concentrations in non-polluted soils from the north and central zone of Chile were similar. However, three sites from the north region have copper concentration as higher as 100 mg kg(-1), values that exceed the critical concentration for copper in soils. The concentration of arsenic and antimony in the north soils were higher than in non-impacted ones and, in the case of arsenic, greatly exceeded the world average concentration reported for this element in soils. The highest arsenic and antimony concentrations were found in Calama and Quillagua soils, two different sites in the Loa valley. The arsenic/antimony concentration ratio was higher in Quillagua soil. The high concentrations of three elements determined in impacted soils from region V (Puchuncaví and Catemu valleys) clearly shows the impact produced in this zone by the industrial and mining activities developed in their proximities. At Puchuncaví valley a clear decrease was observed in copper, arsenic and antimony concentrations in soils on the function of the distance from the industrial complex "Las Ventanas", and all concentrations exceeded the reported critical values for this matrix. Instead at Catemu valley, only the copper concentration was higher than this value. Statistically significant correlation was found for Cu-Sb in all soils; more significant Cu-As, Cu-Sb and Sb-As correlations were evaluated for soils from Puchuncaví and Catemu valleys, corroborating that high concentrations of copper, arsenic and antimony in these soils coming from the same pollution sources, the copper industry and the thermoelectric power plant.     

Inorganic arsenic levels in rice milk exceed EU and US drinking water standards

Under EU legislation, total arsenic levels in drinking water should not exceed 10 microg l(-1), while in the US this figure is set at 10 microg l(-1) inorganic arsenic. All rice milk samples analysed in a supermarket survey (n = 19) would fail the EU limit with up to 3 times this concentration recorded, while out of the subset that had arsenic species determined (n = 15), 80% had inorganic arsenic levels above 10 microg l(-1), with the remaining 3 samples approaching this value. It is a point for discussion whether rice milk is seen as a water substitute or as a food, there are no EU or US food standards highlighting the disparity between water and food regulations in this respect.     

Mapping nitrate leaching to upper groundwater in the sandy regions of The Netherlands, using conceptual knowledge

The European Community asks its Member States to provide a comprehensive and coherent overview of their groundwater chemical status. It is stated that simple conceptual models are necessary to allow assessments of the risks of failing to meet quality objectives. In The Netherlands two monitoring networks (one for agriculture and one for nature) are operational, providing results which can be used for an overview. Two regression models, based upon simple conceptual models, link measured nitrate concentrations to data from remote sensing images of land use, national forest inventory, national cattle inventory, fertiliser use statistics, atmospheric N deposition, soil maps and weather monitoring. The models are used to draw a nitrate leaching map and to estimate the size of the area exceeding the EU limit value in the early 1990s. The 95% confidence interval for the fraction nature and agricultural areas where the EU limit value for nitrate (50 mg/l) was exceeded amounted to 0.77–0.85 while the lower 97.5% confidence limit for the fraction agricultural area where the EU limit value was exceeded amounted to 0.94. Although the two conceptual models can be regarded as simple, the use of the models to give an overview was experienced as complex.     

Comments on 'Elevated antimony concentrations in commercial juices'

The recent J. Environ. Monit. communication 'Elevated antimony concentrations in commercial juices' contains several inaccuracies and misrepresentations about PET packaging as well as food safety and risk assessment. None of the data indicates that "elevated" or unsafe levels of antimony were found in any of the commercial juices or that the variations in antimony levels were attributable to either PET or the other packaging materials.     

Airborne endotoxin in woodworking (joinery) shops

Symptoms such as shortness of breath and cough have been noted in woodworking facilities even where wood dust itself is well-controlled. Suspicion has fallen on other possible contaminants in the workplace atmosphere, including bacterial endotoxin. A few studies have indicated potentially high endotoxin exposure with exposure to fresh wood in sawmills and in the production of fiberboard and chipboard, but fewer studies have been carried out on exposure to endotoxin in dry wood work, for example in joineries. A study of the endotoxin content of airborne wood dust samples from US woodworking facilities is presented, from the re-analysis of samples which previously had been taken to establish mass collection relationships between the IOM sampler, the closed-face 37 mm plastic cassette (CFC) sampler and the Button sampler. Endotoxin was strongly correlated with total dust, but the endotoxin content of a few fresh wood samples was found to be up to ten times higher per unit of wood dust than for dried-wood samples, and this difference was significant. No long-term time-weighted average sample exceeded the recommended limit value of 50 EU m(-3) (EU, endotoxin units)used in the Netherlands, although a number of the IOM samples came close (seven samples or 44% exceeded 20 EU m(-3)) and one short-term (48 minute) sample registered a high value of 73 EU m(-3). The geometric mean concentration from the IOM samples (11 EU m(-3)) is within the range of geometric means found from Australian joineries (3.7-60, combined: 24 EU m(-3)). In contrast, the corresponding values from the CFC (3.6 EU m(-3)), and the Button sampler (2.1 EU m(-3)) were much lower and no samples exceeded 20 EU m(-3). Endotoxin is likely only to be a significant problem in working with dried woods when associated with very high dust levels, where the wood dust itself is likely to be a cause for concern. The results from the few samples in this study where fresh wood was being worked were similar to results from other studies involving fresh woods. The agreement between these studies is encouraging given the difficulties of endotoxin analysis and the wide variation often expected between different laboratories.     

不同水体中环境类雌激素污染状况调查与分析

对80个不同水体样品进行了环境雌激素检测,共有42个样品为阳性(阳性率52.5%),阳性样品主要来自于医疗废水、市政排污口、污水处理厂及与工业污染源废水,水源水中未检出。42个阳性样品检测值均超过EPA标准规定的壬基酚4 d平均浓度限值(6.6μg/L),其中12个样品检测值超过了该标准中规定的壬基酚小时平均浓度限值(28μg/L)。     

Observations on the measurement of total antimony and antimony species in algae, plant and animal tissues

This paper describes our experiences with undertaking measurements of total antimony and antimony speciation in algae, plant and animal tissues. Digestion with nitric acid alone is suitable to release antimony from animal tissues. When organisms have high silica contents, e.g. some plants and algae, the addition of tetrafluorboric acid is required to dissolve silica as some antimony is retained by silica in extracts. Antimony in digested extracts is present as Sb5+ and hydride generation procedures can be used to determine total antimony concentrations, as total antimony in extracts will not be under estimated. Relatively non-aggressive solvents such as water, dilute nitric acid, sodium hydroxide and enzymes remove highly variable amounts of antimony (2-84%) from algae, plant and animal tissues. Addition of Sb3+ and Sb5+ to NIST CRM 1572 Citrus Leaves, pre- and post-extraction with water showed that Sb3+ is oxidised to Sb5+ while Sb5+ is redistributed amongst binding sites giving rise to artefacts. DOLT-2 and algae extracts indicated the presence of only inorganic antimony. A moss sample had inorganic antimony and a number of unknown antimony species in extracts. Future studies should explore the nature of the binding of antimony in tissues as solvents commonly used to extract metals and metalloids from algae, plant and animal tissues are not appropriate.     

Public perception and economic implications of bottled water consumption in underprivileged urban areas

This paper presents a comparative assessment of public perception of drinking water quality in two underprivileged urban areas in Lebanon and Jordan with nearly similar cultural and demographic characteristics. It compares the quality of bottled water to the quality of the drinking water supplied through the public network and examines the economic implications of bottled water consumption in the two study areas. Participants' perception of the quality of drinking water provided via the public network was generally negative, and bottled water was perceived to be of better quality in both areas, thus affecting drinking water preferences and consumption patterns. The results reveal that the quality of bottled water is questionable in areas that lack enforcement of water quality standards, thus adding to the burden of an already disadvantaged community. Both areas demonstrated a considerable cost incurred for purchasing bottled water in low income communities reaching up to 26 % of total income.