Applying mathematical programming to reserve selection

During the last 10–15 years heuristic methods have been developed for problems in optimal reserve selection. Unfortunately, there is no guarantee that heuristics will find optimal solutions. In recognizing this limitation, analysts have formulated reserve selection problems as set covering problems, for which matrix reduction and integer (0/1) programming can be used to find optimal solutions. In this paper we restate the set covering formulation and review solution techniques. A new 0/1 programming model, which is a generalization of the set covering model, is then presented and applied to a hypothetical reserve selection problem. Objectives of minimizing the number of sites selected and maximizing the number of species represented are addressed. Solutions which characterize the tradeoffs between these objectives provide a rich set of information for planners and decision makers. Applications of mathematical programming to related problems in land use planning and forestry are also discussed.     

Isolation and Identification of Enterococci from Seawater Samples: Assessment of Their Resistance to Antibiotics and Heavy Metals

A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.     

Spatial Scale of Autocorrelation of Assemblages of Benthic Invertebrates in Two Upland Rivers in South-Eastern Australia and Its Implications for Biomonitoring and Impact Assessment in Streams

Spatial autocorrelation in ecological systems is a critical issue for monitoring (and a general understanding of ecological dynamics) yet there are very few data available, especially for riverine systems. Here, we report here on assemblage-level autocorrelation in the benthic-invertebrate assemblages of riffles in two adjacent, relatively pristine rivers in south-eastern Victoria, Australia (40-km reaches of the Wellington [surveys in summers of 1996 and 1997] and Wonnangatta Rivers [survey in summer of 1996 only], with 16 sites in each river). We found that analyses were similar if the data were resolved to family or to species level. Spatial autocorrelation was assessed by using Mantel-tests for the data partitioned into different sets of spatial separations of survey sites (e.g. 0–6 km, 6–12 km, etc.). We found strong small-scale (≤6 km) autocorrelation in the Wellington River, which is consistent with known dispersal abilities of many aquatic invertebrates. Surprisingly, there were strong negative correlations at longer distance classes for the Wellington River in one of the two summers (20–40 km) and the Wonnangatta River (12–20 km). That two largely unimpacted, adjacent rivers should have such different autocorrelation patterns suggests that impact assessment cannot assume dependence or independence of sites a priori. We discuss the implications of these results for use of “reference” sites to assess impacts at nominally affected sites.     

Analysis of Polycyclic Aromatic Hydrocarbons in Street Soil Dust in Kumasi Metropolis of Ghana

Concentrations of polycyclic aromatic hydrocarbons (PAHs) in street soil dust from streets in Kumasi Metropolis in the Ashanti Region of the Republic of Ghana have been measured in this study. The concentrations of the various types of PAHs identified in this study are as follows: Naphthalene (m/e 128) – 41,700 μg/kg, Acenaphthylene (m/e 152) – 99,300 μg/kg, Acenaphthene (m/e 154) – 111,200 μg/kg, Fluorene (m/e 166) – 8,900 μg/kg, Carbazole (m/e 167) – 3,500 μg/kg, phenathrene (m/e 178) – 12,900 μg/kg, Anthracene (m/e 178) – 5,400 μg/kg, Fluoranthene (m/e 202) – 16,200 μg/kg, Pyrene (m/e 202) – 15,000 μg/kg, Benzo[a]anthracene (m/e 228) – 13,800 μg/kg, Chrysene (m/e 228) – 33,600 μg/kg, Benzo[k]fluoranthene (m/e 252) – 45,700 μg/kg, Benzo[a]pyrene (m/e 252) – 27,900 μg/kg, Perylene (m/e 252) – 57,200 μg/kg and Benzo[g, h, i]perylene (m/e 276) – 47,000 μg/kg. The results of the study shows that road users, like resident living in buildings within these areas, those engaged in commercial activities like hawking, and the general public are at risk of exposure to the toxic effects of the various types of PAHs from the exhaust of vehicles into the environment. According to these results, there is the potential for exposure to high levels of PAHs for road users and those living in urban environments or along highways.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.     

Accuracy assessment of a small-area method for estimating the spatial distribution of the degree of tree damage

Tree damage, gauged by the amount of defoliation, is one of the basic criteria used to determine treatments for protected and economic forests. Monitoring should include an assessment of the degree of tree damage in different spatial scales. Therefore, in addition to the commonly applied large-area methods, small-area methods should be used. The aim of the paper is to present the results of the accuracy assessment of a small-area method, proposed by Podlaski (2005) [Podlaski, R. (2005). Inventory of the degree of tree defoliation in small areas. Forest Ecology and Management, 215, 361–377], for monitoring the degree of tree damage. The degree of tree damage was shown in sub-blocks P₃ of the system of information on natural environment (SINUS). To estimate the spatial distribution of the degree of tree defoliation, survey sampling, based on simple random sampling with replacement (SRSWR), was used. The degree of damage to fir (Abies alba Mill.) and beech (Fagus sylvatica L.) was analysed in the Święty Krzyż forest section in the Świętokrzyski National Park. The maximum total estimation errors for the proportion of trees with a degree zero of damage, and with second and third degrees of damage together (for α = 0.05) were at most 30.8% for fir and 24.3% for beech trees. For standard, small-area evaluations, these are satisfactory values. In the Święty Krzyż forest section, the number of P₃ sub-blocks with 0.00–5.00% of undamaged trees and with 80.01–100.00% of moderately- or severely-damaged trees was significantly greater for fir than for beech. These results indicate that the fir population was unhealthier than the beech group in the study area. P₃ sub-blocks of the SINUS system, in which the proportion of the healthiest trees was highest, were situated at the forest margin, bordering on meadows and arable fields (in the case of fir) and forming dense patches consisting of several sub-blocks, or occurring singly in the whole study area (in the case of beech). The results show the significant differentiation of forest tree health in small areas.     

Assessment of inceptisols soil quality following long-term cropping in a calcareous environment

The combination of morphological, clay mineralogy, physicochemical, and fertilitical properties of inceptisols were compared for monitoring soil quality response following long-term agricultural activities. For this target, fifty-nine paired surface soils belonging to five subgroups of inceptisols from the major sugar beet growing area and the adjoining virgin lands were described, sampled, and analyzed. The soils were alkaline and calcareous as characterized by high pH, ranging from 7.2 to 8, and calcium carbonate equivalent, ranging from 60 to 300 g kg^− 1. Following long-term sugar beet cultivation, morphological properties modifications were reflected as weakening of structure, hardening of consistency, and brightening of soil color. Although, the quantity of clay minerals did not significantly change through long-term cropping, some modifications in the XRD pattern of illite and smectite were observed in the cultivated soils compared to the adjoining virgin lands mainly as a result of potassium depletion. Without significant variation, sand content decreased by 4–55% and silt and clay increased by 3–22% and 2–15%, respectively, in the cultivated soils than to that of the virgin lands. Both negative and positive aspects of soil quality were reflected regarding soil chemical and fertilitical properties and the role of negative effects far exceeded the role of positive effects. Typic calcixerepts was known to be more degraded through a significant decrease (P ≤ 0.001) in mean value of soil organic carbon (a drop of 24%), total N (a drop of 23%), available K (a drop of 42%), exchangeable K (a drop of 45%), potassium adsorption ratio and potassium saturation ratio (a drop of 44% and 42%, respectively) and a significant increase (P ≤ 0.001) in EC (a rise of 53%). Soil quality index, calculated based on nine soil properties [coarse fragments, pH, SOC, total N, ESP, exchangeable cations (Ca, Mg, and K), and available phosphorus], indicated that 60% of the all soil types studied had negative changes, 20% had positive changes, and 20% produced no changes in soil heath.     

Application of a Larval Medaka Assay to Evaluate the Fish Safety Level in Sagami River, Japan

Physico-chemical characteristics of some river and hand-dug well waters used for drinking and domestic purposes in the oil rich Niger Delta area of Nigeria were assessed using standard methods. The concentrations of the parameters in the river water samples ranged in the following order: pH (5.6–6.9), temperature (26.90–28.60°C), turbidity (23–63 NTU), electrical conductivity (52–184 μs/cm), DO (5.4–7.2 mg/l), BOD (21–57 mg/l), TDS (6.0–217 mg/l), PO₄ ³⁻ (0.19–1.72 mg/l), SO₄ ²⁻ (25–36.8 mg/l), NO₃ ⁻ (20.3–28 mg/l), Fe (6.07–15.71 mg/l), Zn (0.04–0.24 mg/l), Pb (0.01–0.17 mg/l), Ni (0.01–0.13 mg/l), Vn (0.01–0.20 mg/l) and Hg (0.001–0.002 mg/l). The concentrations of these parameters in the hand-dug well water ranged in the following order: pH (5.7–6.8) temperature (26–30°C), turbidity (134–171 NTU), electrical conductivity (160–340 μs/cm), DO (5.4–6.4 mg/l), BOD (13–34 mg/l), TDS (110–190 mg/l), PO₄ ³⁻ (0.84–1.84 mg/l), SO₄ ²⁻ (10.6–28.1 mg/l), NO₃ ⁻ (11.3–23 mg/l), Fe (13.17–16.31 mg/l), Ni (0.01–0.02 mg/l), Vn (0.01–0.04 mg/l) and Hg (0.001–0.004 mg/l). The concentrations of BOD, turbidity, NO₃ ⁻ and Fe in the water samples were above WHO and FMENV permissible limits for safe drinking water. The results suggest that the use of such waters for drinking and domestic purposes pose a serious threat to the health of the users and calls for the intervention of government agencies.     

Efficiency,costs and trade-offs in marine reserve system design

With marine biodiversity conservation the primary goal for reserve planning initiatives, a site's conservation potential is typically evaluated on the basis of the biological and physical features it contains. By comparison, socio-economic information is seldom a formal consideration of the reserve system design problem and generally limited to an assessment of threats, vulnerability or compatibility with surrounding uses. This is perhaps surprising given broad recognition that the success of reserve establishment is highly dependent on widespread stakeholder and community support. Using information on the spatial distribution and intensity of commercial rock lobster catch in South Australia, we demonstrate the capacity of mathematical reserve selection procedures to integrate socio-economic and biophysical information for marine reserve system design. Analyses of trade-offs highlight the opportunities to design representative, efficient and practical marine reserve systems that minimise potential loss to commercial users. We found that the objective of minimising the areal extent of the reserve system was barely compromised by incorporating economic design constraints. With a small increase in area (<3%) and boundary length (<10%), the economic impact of marine reserves on the commercial rock lobster fishery was reduced by more than a third. We considered also how a reserve planner might prioritise conservation areas using information on a planning units selection frequency. We found that selection frequencies alone were not a reliable guide for the selection of marine reserve systems, but could be used with approaches such as summed irreplaceability to direct conservation effort for efficient marine reserve design.     

Distribution of heavy metals in the dissolved and suspended phase of the sea-surface microlayer, seawater column and in sediments of Singapore’s coastal environment

Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore’s coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34–2.04, 0.013–0.109, 0.07–0.35, 0.23–1.16, 0.28–0.78, 0.009–0.062 and 0.97–3.66 μg L⁻¹ respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16–0.73, 6.72–53.93, 12.87–118.29, 4.34–60.71, 1.10–6.08 and 43.09–370.49 μg g⁻¹, respectively. Heavy metal concentrations in sediments ranged between 0.054–0.217, 37.48–50.52, 6.30–21.01, 13.27–26.59, 24.14–37.28 and 48.20–62.36 μg g⁻¹ for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.     

Distribution of heavy metals in water, particulate matter and sediments of Gediz River (Eastern Aegean)

The present paper is the first document of heavy metal levels in surficial sediment, water and particulate matter of the Gediz River collected from five different sites in August, October 1998, February, June 1999. The present work attempts to establish the status of distribution and environmental implications of metals in the sediment, water and particulate matter and their possible sources of derivation. The concentrations of mercury ranged 0.037–0.81, 120–430; lead 0.59–1.5, 190–8,100; copper 0.24–1.6, 30–180; zinc 0.19–2.9, 10–80; manganese 30–170, 20–490; nickel 0.39–9.0, 100–510; iron 1.3–687, 100–6,200 μg/l in water and particulate matter, respectively. The maximum values in water were generally obtained in summer periods due to industrial and agricultural activities at Muradiye. The particulate metal concentrations also generally showed increased levels from the upper Gediz to the mouth of the river. Calculation of metal partition coefficients shows that the relative importance of the particulate and the water phases varies in response to water hydrochemistry and suspended solid content, but that most elements achieve a conditional equilibrium in the Gediz River. The metals ranged between Hg: 0.25–0.49, Cr: 59–814, Pb: 38–198, Cu: 15–148, Zn: 34–196, Mn: 235–1,371, Ni: 35–175, and Fe: 10,629–72,387 mg/kg in sediment. The significant increase of metals found in Muradiye suggested a pollution effect, related to anthropogenic wastes. Also, relatively high concentrations of Ni and Mn occurred in sampling site upstream, due to geochemical composition of the sediments. Maximum values of contamination factor for metals were noticed for sediment of Muradiye. The sampling stations have very high degree of contamination indicating serious anthropogenic pollution.     

Assessment of water pollution in different bleaching based paper manufacturing and textile dyeing industries in India

Paper industries using different raw materials such as hard wood, bamboo, baggase, rice-straw and waste papers and bleaching chemicals like chlorine, hypochlorite, chlorine dioxide, hydrogen peroxide, sulphite and oxygen were studied to estimate organic pollution load and Adsorbable Organic Halides (AOX) per ton of production. The hard wood based paper industries generate higher Chemical Oxygen Demand (COD) loads (105–182 kg t⁻¹) and Biochemical Oxygen Demand (BOD) loads (32.0–72 kg t⁻¹) compared to the agro and waste paper based industrial effluents. The bleaching sequences such as C–EP–H–H, C–E–H–H, C–E–Do–D1 and O–Do–EOP–D1 are adopted in the paper industries and the molecular elemental chlorine free bleaching sequence discharges low AOX in the effluent. The range of AOX concentration in the final effluent from the paper industries was 0.08–0.99 kg t⁻¹ of production. Water consumption was in the range of 100–130 m³ t⁻¹ of paper production for wood based industries and 30–50 m³ for the waste paper based industries. Paper machine effluents are partially recycled after treatment and pulp mill black liquor are subject to chemical recovery after evaporation to reduce the water consumption and the total pollution loads. Hypochlorite bleaching units of textile bleaching processes generate more AOX (17.2–18.3 mg l⁻¹) and are consuming more water (45–80 l kg⁻¹) whereas alkali peroxide bleaching hardly generates the AOX in the effluents and water consumption was also comparatively less (40 l kg⁻¹ of yarn/cloth).     

Trace metal concentrations in suspended particles, sediments and clams (Ruditapes philippinarum) from Jiaozhou Bay of China

Suspended particulate matter (SPM), sediments and clams were collected at three sites in Jiaozhou Bay to assess the magnitude of trace metal pollution in the area. Metal concentrations in SPM (Cu: 40.11–203; Zn: 118–447; Pb: 50.1–132; Cd: 0.55–4.39; Cr: 147.6–288; Mn: 762−1670 μg/g), sediments (Cu: 17.64–34.26; Zn: 80.79–110; Pb: 24.57–49.59; Cd: 0.099–0.324; Cr: 41.6–88.1; Mn: 343−520μg/g) and bivalves (Cu: 6.41–19.76; Zn: 35.5–85.5; Pb: 0.31–1.01; Cd: 0.51–0.67; Mn: 27.45−67.6 μg/g) are comparable to those reported for other moderately polluted world environments. SPM showed a less clear pattern. Metal concentrations in sediments displayed a clear geographical trend with values increasing with proximity to major urban centers. The clams (on dry weight) showed a complex pattern due to the variability introduced by age-related factors. Cd showed an apparent reverse industrial trend with higher concentrations in clams collected at distant stations. Zn, Pb and Mn showed no clear geographical pattern, whereas Cu increased in the clams collected in the most industrialized area. In addition, the bioaccumulation factors (BAF) were calculated. The result indicated that the studied Ruditapes philippinarum in Jiaozhou Bay possessed different bioaccumulation capacities for Cd, Zn, Cu, Pb and Mn, and Cd, Zn had a relatively high assimilation of those metals from sediment particles. A significant relationship with clam age was observed for Zn (positive) and Cu (negative) suggesting different physiological requirements for both metals with age. Trace metal concentrations measured in the tissue of the investigated clam were in the range considered safe by the WHO for human use.     

Status of insecticide contamination of soil and water in Haryana, India

Twelve samples each of soil and ground water were collected from paddy-wheat, paddy-cotton, sugarcane fields and tube wells from same or near by fields around Hisar, Haryana, India during 2002–2003 to monitor pesticide residues. Residues were estimated by GC-ECD and GC-NPD systems equipped with capillary columns for organochlorine, synthetic pyrethroid and organophosphate insecticides. In soil, HCH (0.002–0.051 μg g⁻¹), DDT (0.001–0.066 μg g⁻¹), endosulfan (0.002–0.039 μg g⁻¹) and chlordane (0.0002–0.019 μg g⁻¹) among organochlorines, cypermethrin (0.001–0.035 μg g⁻¹) and fenvalerate (0.001–0.022 μg g⁻¹) among synthetic pyrethroids and chlorpyriphos (0.002–0.172 μg g⁻¹), malathion (0.002–0.008 μg g⁻¹), quinalphos (0.001–0.010 μg g⁻¹) among organophosphates were detected. Dominant contaminants were DDT, cypermethrin and chlorpyriphos from the respective groups. In water samples, HCH, DDT, endosulfan and cypermethrin residues were observed frequently. Only chlorpyriphos among organophosphates was detected in 10 samples. On consideration of tube well water for drinking purpose, about 80% samples were found to contain residues above the regulatory limits.     

Designing a conservation reserve network with minimal fragmentation: A linear integer programming approach

In the biological conservation literature, the optimum reserve site selection problem has often been addressed by using the prototype set covering and maximal covering formulations, assuming that representation of species is the only criterion in site selection. This approach usually results in a small but highly fragmented reserve, which is not useful for practical conservation planning. To improve the chances of species' persistence, it may be desirable to reduce habitat fragmentation. This paper presents a linear integer programming formulation to minimize spatial gaps between selected sites in a reserve network, which is applied to a data set on breeding birds. The authors express their willingness to share the database used in this study. Those readers who wish to have access to the data may contact Robert A. Briers at r.briers@napier.ac.uk.     

Trace Metal Levels in Mussels (Mytilus Galloprovincialis L. 1758) from Turkish Aegean Sea Coast

Bio-monitoring of some heavy metal levels (Cd, Pb, Zn, Cu) in whole edible soft parts of Mytilus galloprovincialis (L. 1758) was conducted in Turkish Aegean Sea coast during the period of September 2002–August 2003 seasonally. Moreover, some physico-chemical environmental parameters, also have been analysed in the same region. The values of some physico-chemical environmental parameters in coastal waters of Turkish Aegean Sea were changed between; 9.0–27.0 ^∘C for temperature, 31.93–40.45 psu for salinity, 7.35–8.48 for pH and 4.05–9.50 mg/l for dissolved oxygen. The levels of trace elements in whole edible soft parts including interstitial fluids of Mediterranean mussels M. galloprovincialis (L. 1758), sampled from 6 different regions of Turkish Aegean Sea coast have ranged between; 0.04–0.52 μg Cd/g wet weight, 0.49–1.72 μg Pb/g w.w., 0.95–1.85 Cu/g w.w., 16.11–37.15 μg Zn/g w.w. The highest values for all trace metals (Cd, Pb, Zn, Cu) were measured in inner part of Izmir Bay (station 3) and lowest in Sigacik and Gulluk Bay (station 5, 6). Generally heavy metal levels are lower than the results in soft mussel tissues reported from Mediterranean regions.     

Heavy Metal Contents of the Karasu Creek Sediments, Nigde, Turkey

Heavy metal contamination in sediments of the Karasu spring was investigated in the presented study. In this respect, sediment samples were collected from contaminant sites along the spring starting from the spring water manifestation site, base of the Akkaya dam to the dam exit site. Heavy metal concentrations were determined by X-ray Fluorescence Spectrometer. Cobalt, copper, arsenic, tin, nickel, zinc, cadmium, lead, aluminum, iron, titan, chromium and manganese contents of the Karasu creek sediments are found as 18.30–69.00, 12.40–595.0 5.50–345.3, 5.80–15.1, 10.9–64.1, 28.90–103,300, 4.1–356.2, 7.70–37,840, 13,460–109,400, 11,740–62,900, 22.18–59.04, 41.70–369 and 12.09–3,480 mg/kg, respectively. Results indicate the presence of a contamination in the Karasu creek. All the metal concentrations were found to be exceeding their acceptable limit values. Eutrophication is developed in the Karasu creek and the Akkaya dam. It is thought that heavy metal accumulation in the creek is originated from discharge from mine quarries, industrial and domestic wastes. Protection zones should be defined and all necessary measures must be taken along the Karasu creek.     

Characterization of Rain and Roof Drainage Water Quality in Xanthi, Greece

Thirteen field campaigns were undertaken in the period from December 2, 2002 until September 1, 2004 to collect water samples in order to characterize the quality of rainfall and roof drainage in the city of Xanthi, a typical provincial city in Greece. In each campaign, water samples were collected from 10 representative sites in the city (in total 130 samples), representing areas of distinct land use and human activities (i.e., traffic volume, residence density and industrial activity). The water samples were analyzed according to drinking water criteria for total coliform (not detected), temperature (range: 0.9–20°C), pH (range: 3.6–11.4), alkalinity (range: 0–21.5 mg CaCO₃/L), nitrate (range: 0–2456 μg/L), ammonium (range: 0–2628 μg/L), sulfate (range: 0–0.5 mg/L), calcium (range: 259.1–3064 μeq/L), magnesium (range: 0.8–488.8 μeq/L), potassium (range: 0.0–110.6 μeq/L) and dissolved heavy metals (Fe, range: 0.01–0.18 mg/L; Mn, range: 0.01–0.09 mg/L; Zn, range: 0.01–0.54 mg/L; Cu, Cr and Ni, not detected). Pollutant concentrations were generally higher in roof drainage than in rainwater, but both were lower than drinking water standards. Dissolved heavy metal concentrations were generally higher in the areas of intensive human activities, such as roads with high traffic volume and densely populated residential areas. The satisfactory quality of rainwater, which results from this analysis, makes its use as grey water possible.     

Identification of mangrove water quality by multivariate statistical analysis methods in Pondicherry coast,India

Different multivariate statistical analysis such as, cluster analysis, principal component analysis, and multidimensional scale plot were employed to evaluate the trophic status of water quality for four monitoring stations. The present study was carried out to determine the physicochemical parameters of water and sediment characteristics of Pondicherry mangroves—southeast coast of India, during September 2008–December 2010. Seasonal variations of different parameters investigated were as follows: salinity (10.26–35.20 psu), dissolved oxygen (3.71–5.33 mg/L), pH (7.05–8.36), electrical conductivity (26.41–41.33 ms⁻¹), sulfide (1.98–40.43 mg/L), sediment texture sand (39.54–87.31%), silt (9.89–32.97%), clay (3.06–31.20%), and organic matter (0.94–4.64%). pH, temperature, salinity, sand, silt, clay, and organic matter indicated a correlation at P < 0.01. CA grouped the four seasons in to four groups (pre-monsoon, monsoon, post-monsoon, summer) and the sampling sites in to three groups. PCA identified the spatial and temporal characteristics of trophic stations and showed that the water quality was worse in stations 3 and 4 in the Pondicherry mangroves.     

Changes of Land Use and of Ecosystem Service Values in Sanjiang Plain, Northeast China

Agricultural activities, especially reclamation, are considered major threats to the wetland ecosystems in Sanjiang Plain, the largest concentrated area of the freshwater wetlands in China. In the past decades, the area of the cultivated land and its grain production have been increased at the cost of wetlands shrinkage. The large-scale land reclamation severely affected the ecosystems in this region. However, such effects at the regional scale are seldom evaluated quantitatively. We used three datasets of LANDSAT MSS and/or TM imagery to estimate the area changes and the transition of land use types from 1980 to 2000. We also valued changes in ecosystem services delivered by each land category using value coefficients published by Costanza et al. [Nature 387, 1997, 253–260]. Sensitivity analysis suggested that these estimates were relatively robust. Finally, the contribution of various ecosystem functions was ranked to the overall value of the ecosystem services in this study. According to our estimates, the total annual ecosystem service values in Sanjiang Plain have declined by about 40% between 1980 and 2000 ($156284–182572.18 million in total over 20 years). This substantial decline is largely attributed to the 53.4% loss of wetlands. For individual ecosystem functions, waste treatment, water supply and disturbance regulation account for more than 60% to the total ecological values. During those two decades, the contribution of disturbance regulation, cultural and recreation decreased, while the contribution of water regulation, nutrient cycling, food production, raw materials and climate regulation increased during the same period. We also put forward a few proposals concerning the future land use policy formulation and sustainable ecosystems. They are adjusting the ‘food first’ agricultural policy, establishing more nature reserves for wetlands, creating systems for the rational use of water, harnessing the degraded cultivated land and encouraging eco-tourism.