Quality of wastewater reuse in agricultural irrigation and its impact on public health

This study is planned to perform a sanitary survey of the largest sewage treatment plant in Riyadh, KSA, fortnightly for 6 months to examine its effluent quality as an example for the growing dependence on reuse of treated municipal wastewater in agricultural irrigation purposes to cope with increasing water shortage. The biological and physico-chemical parameters of 12 wastewater samples from the plant were examined using standard methods. The physico-chemical analysis indicated that the surveyed municipal wastewater treatment plant contained some of the studied parameters, such as turbidity, total suspended solids, biochemical oxygen demand, chemical oxygen demand and residual chlorine above the maximum permissible wastewater limits set by the Saudi Standards. However, heavy metal concentrations in all samples were lower than the recommended standards. Total and faecal coliform counts were above the permissible limits indicating poor sanitation level. Fifty percent of all wastewater samples were contaminated with faecal coliforms but, surprisingly, Escherichia coli were only detected in 8.3 % of the samples. Regular monitoring and enhancement of microbial and physico-chemical parameters of the wastewater quality served by different wastewater treatment plants for reuse in agricultural irrigation is recommended to preserve the environment and public health.     

Water quality assessment of Lake Pandu Bodhan, Andhra Pradesh State, India

A systematic investigation of variations in some nutrient levels at Pandu Lake from August 2002 to July 2004 was carried out. The untreated domestic wastes from various parts of Bodhan town are directly discharged into Pandu Lake leading to gross pollution. Therefore present investigation was under taken to assess the magnitude of sewage pollution by monitoring key water quality parameters dissolved oxygen, biological oxygen demand, alkalinity, calcium, nitrates and phosphates etc. Monthly water samples were collected from three different sampling stations. Low Dissolved oxygen and high biological oxygen demand, elevated Nitrates and Phosphates levels were found, which gives the information about conversion of this water body from oligotrophic to eutrophic nature. Phosphates were found to be in the range of 0.9 to 4.0 mg/L. Nitrates were found to be higher in Pandu Lake and their number is more in summer, and suitable explanation was given. Nitrates were found to be in range between 24.8mg/L to 71.2mg/L. Data on various chemical characteristics vary at different sites in different months in Pandu Lake. Some of the characteristics like Dissolved Oxygen, Biological Oxygen Demand, Nitrates, Phosphates and nutrient loading are contributing to eutrophication process in this lake and the lake seems to be eutrophic through out the year.     

Monitoring Changes in Freshwater Macroinvertebrate Communities Along a Salinity Gradient Using Artificial Substrates

Scientists strive to develop efficient sampling protocols, reducing both the number of samples and processing time required, which can be adapted for use in a broad range of ecosystems. We investigated the accuracy and usefulness of artificial substrates in monitoring the impact of rising salinity on freshwater macroinvertebrate communities. We sampled seven sites along a salinity gradient (from 0.2gL^-1 to 2.6gL^-1) over a 19-km stretch of the Meurthe River, in northeastern France. All other parameters remained stable in this section of the river. Artificial substrate samples, each consisting of six liters of pebbles, were removed from the river at one-month intervals and examined. Results obtained indicated the same qualitative impairments as those found in samples collected using a Surber net. The use of artificial substrates was found to be a viable alternative method for assessing biological changes in river quality due to increasing salinity disturbance when Surber sampling cannot be performed.     

Analysis of the environmental impact on a stream: is only tannery to blame?

The contribution of wastewater from a tannery industry to the pollution of a stream was investigated. The main parameters studied were biochemical oxygen demand, chemical oxygen demand, chromium, dissolved oxygen, fecal and total coliforms, nitrogen, oils and greases, pH, phosphorous, sulfides, suspended solids, turbidity, and volatile solids. Three sampling points were located: (1) at the discharge point of tannery wastewater, (2) 50 m upstream, and (3) 80 m downstream of discharge point. Also was investigated the pollution at the stream source.     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Effect of highways and local activities on the quality of underground water in Ogun State, Nigeria

The effect of highways and local activities on the quality of groundwater in Ogun State, Nigeria was investigated. This was done by collecting groundwater samples from three different districts in the state, located in Southwestern Nigeria. The water samples collected at 5 m from the highway and control samples collected at 3 km from the highway were analyzed for the following physicochemical parameters: pH, conductivity, chemical oxygen demand, alkalinity, total hardness, total solid, suspended solid, dissolved solid, chloride, sulfate, phosphate, nitrate, phenol, and the metals—lead, zinc, iron, aluminum, sodium, and potassium. The levels of chromium, copper, and cadmium in the samples were below the detectable limit. The levels of the parameters show that there are significant differences between those in the samples and the controls (F test) except for phosphate and phenol. Also, anthropogenic sources (local activities) elevate the levels of different specific parameters, which are related to these activities. Good correlation was observed between traffic density and lead levels as well as between conductivity and dissolved solids. Comparisons with the World Health Organization guidelines indicate that most of the water samples are not suitable for human consumption.     

Development of the microbial communities in lake donghu in relation to water quality

There is increasing recognition that protozoa is very useful in monitoring and evaluating water ecological healthy and quality. In order to study the relationship between structure and function of protozoan communities and water qualities, six sampling stations were set on Lake Donghu, a hypereutrophic subtropical Chinese lake. Microbial communities and protists sampling from the six stations was conducted by PFU (Polyurethane foam unit) method. Species number (S), diversity index (DI), percentage of phytomastigophra, community pollution value (CPV), community similarity and heterophy index (HI) were mensurated. The measured indicators of water quality included total phosphorus (TP), dissolved oxygen (DO), Chemical oxygen demand (COD), NH(4)(+), NO(2)(-) and NO(3)(-). Every month water samples from stations I, II, III, IV were chemically analyzed for a whole year, Among the chemically analyzed stations, station I was the most heavily polluted, station II was the next, stations III and IV had similar pollution degrees. The variable tendencies of COD, TP, NH(3), NO(2)(-), NO(3)(-), and DO during the year was approximately coincident among the six stations. Analysis from the community parameters showed that the pollution of station 0 was much more serious than others, and station V was the most slight. Of the community parameters, CPV and HI were sensitive in reflecting the variables of the water quality. Community similarity index was also sensitive in dividing water qualities and the water quality status of different stations could be correctly classified by the cluster analysis. DI could reflect the tendency of water quality gradient, species number and percentage of Phytomastigophora was not obvious in indicating the water quality gradient.     

Detection of seasonal variations in surface water quality using discriminant analysis

In the study, discriminant analysis (DA) was applied to water quality data set monitored in winter and summer months along 3 years to investigate seasonal variations of Tahtali Reservoir water quality. The variables were divided into two categories as “parameters naturally found in surface waters—Al, Fe, Mn, F, Ba, Cl, and SO₄” and “pollutants—biochemical oxygen demand, chemical oxygen demand, and NO₃”. Linear discriminant functions were calculated to distinguish between winter and summer samples. Results revealed that water quality variables (naturally found in surface water and also pollutants) were distinctly different between two seasons. Seasonal changes of water quality caused by anthropogenic activities should be taken into consideration by the water managers especially in summer seasons in which higher concentrations were observed. The study showed that DA can be applied successfully to establish the seasonal variation in surface water quality and make it possible to design a future temporal sampling strategy in an optimal manner.     

Sensitivity analysis of water quality for Delhi stretch of the River Yamuna,India

Simulation models are used to aid the decision makers about water pollution control and management in river systems. However, uncertainty of model parameters affects the model predictions and hence the pollution control decision. Therefore, it often is necessary to identify the model parameters that significantly affect the model output uncertainty prior to or as a supplement to model application to water pollution control and planning problems. In this study, sensitivity analysis, as a tool for uncertainty analysis was carried out to assess the sensitivity of water quality to (a) model parameters (b) pollution abatement measures such as wastewater treatment, waste discharge and flow augmentation from upstream reservoir. In addition, sensitivity analysis for the “best practical solution” was carried out to help the decision makers in choosing an appropriate option. The Delhi stretch of the river Yamuna was considered as a case study. The QUAL2E model is used for water quality simulation. The results obtained indicate that parameters K ₁ (deoxygenation constant) and K ₃ (settling oxygen demand), which is the rate of biochemical decomposition of organic matter and rate of BOD removal by settling, respectively, are the most sensitive parameters for the considered river stretch. Different combinations of variations in K ₁ and K ₂ also revealed similar results for better understanding of inter-dependability of K ₁ and K ₂. Also, among the pollution abatement methods, the change (perturbation) in wastewater treatment level at primary, secondary, tertiary, and advanced has the greatest effect on the uncertainty of the simulated dissolved oxygen and biochemical oxygen demand concentrations.     

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.     

Assessment of water quality parameters of the Harike wetland in India, a Ramsar site, using IRS LISS IV satellite data

This study aims at the classification and water quality assessment of Harike wetland (Ramsar site) in India using satellite images from the Indian Remote Sensing satellite, Resourcesat (IRS P6). The Harike wetland is a converging zone of two rivers, Beas and Sutlej. The satellite images of IRS Linear Imaging Self Scanner (LISS) IV multispectral sensor with three bands (green, red, and near infrared (NIR)) and a spatial resolution of 5.8 m were classified using supervised image classification techniques. Field points for image classification and water sampling were recorded using a Garmin eTrex Global Positioning System. The water quality parameters assessed were dissolved oxygen, conductivity, pH, turbidity, total and suspended solids (SS), chemical oxygen demand, and Secchi disk transparency (SDT). Correlations were established between turbidity and SS, SS and SDT, and total solids and turbidity. Using reflectance values from the green, red, and NIR bands, we then plotted the water quality parameters with the mean digital number values from the satellite imagery. The NIR band correlated significantly with the water quality parameters, whereas, using SDT values, it was observed that the green and the red reflectance bands were able to distinguish the waters from the two rivers, which have different water qualities.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.     

Assessment of vehicular pollution in Kolkata, India, using CALINE 4 model

Michigan water quality standards for public bathing beaches require local health departments to collect and analyze a minimum of three water samples for Escherichia coli during each sampling event. The geometric mean number of E. coli colonies is then compared to the 300 colonies per 100 ml standard to determine compliance. This article compares the results of the currently mandated procedure to a composite sampling method, whereby the three samples are mixed in equal volumes and analyzed once. This effectively replaces the geometric mean of the individual sample results with an arithmetic mean. Although arithmetic means are more affected by outliers, this sensitivity to high concentrations is more health conservative than the geometric mean. During the 2007 sampling season, nine bathing beaches were monitored once each week. Three individual point samples and a composite sample were analyzed for each sampling event. No statistically significant differences in bacteria concentrations were found between composite sample analysis and the arithmetic mean of individual point sample analyses. No violations were detected in the 2007 sampling season, so using historical data, a retrospective analysis was performed on samples gathered at nine bathing beaches in Kalamazoo County, Michigan during the years 2001–2007. The arithmetic mean of the three samples taken at each site served as a surrogate composite sample. The benefits of compositing the three samples were investigated assuming a 2/3 reduction in analytical costs. In the traditional sampling method, three individual samples were obtained and analyzed once in every 3-week period during the summer season, whereas compositing was simulated by taking the arithmetic mean of each week’s results. The results of this retrospective cost analysis indicates that ten to 14 violations would have been missed using the less frequent traditional sampling and analysis methodology. Composite sampling is a cost-saving alternative to traditional sampling techniques that can be more protective of public health, particularly when the savings are applied to increased numbers of samples in time or space.     

Evaluation of efficiency of aircraft liquid waste treatment and identification of daily inspection indices: a case study in Changchun, China

Evaluation of the efficiency of aircraft liquid waste treatment has previously been conducted to prevent pollution of the environment. The current study aimed to provide a set of practical methods for efficient airport sanitary supervision. Aircraft liquid waste was collected at Longjia International Airport, Changchun from multiple flights. The efficiency of liquid waste treatment as well as the water quality of the wastewater processed via a second-stage wastewater facility were examined by measuring a number of physical, chemical, and biological indices. Our results indicated that treatment solely via resolvable sanitizing liquid was not sufficient. Although the contents of first-class pollutants all met the requirements of the standard criteria, the contents of a number of second-class pollutants did not satisfy these criteria. However, after further treatment via a second-stage wastewater facility installed at the airport, all indices reached second-grade requirements of the discharge standard. We suggest that daily inspection and quarantine indices at airports should include the suspension content, biological oxygen demands after 5 days, chemical oxygen demand total organic carbon content, amino nitrogen content, total phosphorous content, and the level of fecal coliforms.     

Water quality monitoring and assessment of an urban Mediterranean lake facilitated by remote sensing applications

Degradation of water quality is a major problem worldwide and often leads to serious environmental impacts and concerns about public health. In this study, the water quality monitoring and assessment of the Koumoundourou Lake, a brackish urban shallow lake located in the northeastern part of Elefsis Bay (Greece), were evaluated. A number of water quality parameters (pH, temperature, dissolved oxygen concentration, electrical conductivity, turbidity, nutrients, and chlorophyll-a concentration) were analyzed in water samples collected bimonthly over a 1-year period from five stations throughout the lake. Moreover, biological quality elements were analysed seasonally over the 1-year period (benthic fauna). Statistical analysis was performed in order to evaluate the water quality of the lake and distinguish sources of variation measured in the samples. Furthermore, the chemical and trophic status of the lake was evaluated according to the most widely applicable classification schemes. Satellite images of Landsat 5 Thematic Mapper were used in order for algorithms to be developed and calculate the concentration of chlorophyll-a (Chl-a). The trophic status of the lake was characterized as oligotrophic based on phosphorus and as mesotrophic–eutrophic based on Chl-a concentrations. The results of the remote sensing application indicated a relatively high coefficient of determination (R ²) among point sampling results and the remotely sensed data, which implies that the selected algorithm is reliable and could be used for the monitoring of Chl-a concentration in the particular water body when no field data are available.     

Benthic Macroinvertebrate Responses to Increasing Levels of Cattle Grazing in Blue Ridge Mountain Streams, Virginia, USA

The relationship between benthic macroinvertebrate assemblages and cattle density was assessed from fall 2002 through spring 2004 in five small streams that represented a gradient of cattle grazing intensity. All study stream reaches were in pasture with no woody riparian vegetation, but varied in the intensity of cattle grazing (0 cattle ha⁻¹ at site 1 to 2.85 cattle ha⁻¹ at site 5). Regression analysis indicated highly significant and strong macroinvertebrate metric responses to cattle density during most sampling periods. The majority of metrics responded negatively to increased grazing, while a few (total taxa richness, number of sensitive taxa, and % collector filterers) increased along the gradient before declining at the most heavily grazed sites. Total number of sensitive taxa and % Coleoptera had the strongest relationship with cattle density throughout the study period. During some sampling periods, nearly 80% of the variation in these metrics was explained by cattle density. The elmid beetle, Oulimnius, had a particularly strong negative response to the grazing gradient. Study site groupings based on taxa composition, using detrended correspondence analysis (DCA), indicated that benthic samples collected from the reference site and light rotational grazing site were more similar in macroinvertebrate taxa composition than samples collected from the intermediate grazing and heavy grazing sites. Our findings demonstrate that biological integrity, as measured by benthic macroinvertebrate metrics and assemblage composition, is highly related to cattle density in small streams in the Blue Ridge mountains, Virginia, USA. This suggests that the degree of agricultural intensity should be given consideration in stream assessments, as well as land use planning and regulatory decisions.     

Assessment of surface water quality using a growing hierarchical self-organizing map: a case study of the Songhua River Basin,northeastern China,from 2011 to 2015

The analysis of a large number of multidimensional surface water monitoring data for extracting potential information plays an important role in water quality management. In this study, growing hierarchical self-organizing map (GHSOM) was applied to a water quality assessment of the Songhua River Basin in China using 22 water quality parameters monitored monthly from 13 monitoring sites from 2011 to 2015 (14,782 observations). The spatial and temporal features and correlation between the water quality parameters were explored, and the major contaminants were identified. The results showed that the downstream of the Second Songhua River had the worst water quality of the Songhua River Basin. The upstream and midstream of Nenjiang River and the Second Songhua River had the best. The major contaminants of the Songhua River were chemical oxygen demand (COD), ammonia nitrogen (NH₃-N), total phosphorus (TP), and fecal coliform (FC). In the Songhua River, the water pollution at downstream has been gradually eased in years. However, FC and biochemical oxygen demand (BOD₅) showed growth over time. The component planes showed that three sets of parameters had positive correlations with each other. GHSOM was found to have advantages over self-organizing maps and hierarchical clustering analysis as follows: (1) automatically generating the necessary neurons, (2) intuitively exhibiting the hierarchical inheritance relationship between the original data, and (3) depicting the boundaries of the classification much more clearly. Therefore, the application of GHSOM in water quality assessments, especially with large amounts of monitoring data, enables the extraction of more information and provides strong support for water quality management.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Hydrogeochemistry for the assessment of groundwater quality in Varanasi: a fast-urbanizing center in Uttar Pradesh, India

The hydrogeochemical parameters for groundwater samples of the Varanasi area, a fast-urbanizing region in India, were studied to evaluate the major ion chemistry, weathering and solute acquisition processes controlling water composition, and suitability of water quality for domestic and irrigation uses. Sixty-eight groundwater samples were collected randomly from dug wells and hand pumps in the urban Varanasi area and analyzed for various chemical parameters. Geologically, the study area comprises Quaternary alluvium made up of an alternating succession of clay, silty clay, and sand deposits. The Total dissolved solids classification reveals that except two locations, the groundwater samples are desirable for drinking, and all are useful for irrigation purposes. The cationic and anionic concentrations indicated that the majority of the groundwater samples belong to the order of Na > Ca > Mg > K and HCO₃ > Cl > SO₄ types, respectively. Geochemical classification of groundwater based on the Chadha rectangular diagram shows that the majority (81%) of groundwater samples belong to the calcium?Cbicarbonate type. The HCO₃/ (HCO₃ + SO₄) ratio (0.87) indicates mostly carbonic acid weathering process due to presence of kankar carbonate mixed with clay/fine sand. The high nitrate concentration (>45?mg/l) of about 18% of the groundwater samples may be due to the local domestic sewage, leakage of septic tanks, and improper management of sanitary landfills. In general, the calculated values of sodium adsorption ratio, percent sodium, residual sodium carbonate, and permeability index indicate good to permissible use of water for irrigation, and only a few locations demand remedial measures for better crop yields.     

Characteristics of Stormwater Quality from Two Urban Watersheds in Singapore

This paper presents the results of a study on the quality of stormwater runoff from two adjacent urban watersheds in Singapore. The study involved continuous recording of rainfall and streamflow within the basins, and systematic sampling of storm runoff during rainfall events. The water samples collected were analysed for its physical and chemical constituents. The ranges and mean concentrations of common quality parameters have been established, and the flushing effects of selected parameters were studied. Correlations of event mean concentrations and pollution loads of total suspended solids and chemical oxygen demand to both antecedent dry weather period and rainfall characteristics were also carried out.