Spatial distribution of acid-volatile sulphide concentration and metal bioavailability in mangrove sediments from the Brisbane River, Australia

Acid-volatile sulphide (AVS) was measured at regular positions along eight transects through a mangrove forest in the Brisbane River, Queensland, Australia. Concentrations ranged from 0.33 to 22.61 micromol S g(-1) sediment dry weight. There was no correlation between AVS concentration and the proportion of clay-sand in the sediment, but sediments with high AVS concentrations tended to contain more water (rs=0.43; p=0.01). AVS concentrations were used to assess the potential bioavailability of the sediment heavy metal burden. The spatial variability of potential bioavailability was high and depended to a great extent on which metals were considered as part of the AVS complexing system. It is suggested seasonal variations would further increase the observed variability in bioavailability. This variation should be taken into account when monitoring and assessing long-term trends in sediment toxicity.     

Sampling method, storage and pretreatment of sediment affect AVS concentrations with consequences for bioassay responses

Sediment treatment and sediment storage may alter sediment toxicity, and consequently biotic response. Purpose of our study was to combine these three aspects (treatment-toxicity-biotic response) in one integrated approach. We used Acid Volatile Sulfide (AVS) concentrations as a proxy of the disturbance of the sediment. AVS and Simultaneously Extracted Metal (SEM) concentrations were compared to bioassay responses with the freshwater benthic macroinvertebrate Asellus aquaticus. Storage conditions and sediment treatment affected AVS but not SEM levels. AVS can be used as a proxy for sediment disturbance. The best way to pretreat the sediment for use in a bioassay in order to maintain initial AVS conditions was to sample the sediment with an Ekman grab, immediately store it in a jar without headspace, and freeze it as soon as possible. In a survey using seven different sediments, bioassay responses of A. aquaticus were correlated with SEM and AVS characteristics.     

Heavy metal in sediments of Ziya River in northern China: distribution,potential risks,and source apportionment

The concentration partitioning between the sediment particle and the interstitial water phase plays an important role in controlling the toxicity of heavy metals in aquatic systems. The aim of this study was to assess the sediment quality in a polluted area of the Ziya River, Northern China. The contamination potential and bioavailability of six metals were determined from the concentrations of total metals and the bioavailable fractions. The results showed that the concentrations of Cr, Cu, Ni, Zn, and Pb exceeded the probable effect concentration at several sites. The high geoaccumulation indices showed that the sediments were seriously contaminated by Cd. The ratio of acid-volatile sulfide (AVS) to simultaneously extracted metal (SEM) was higher than 1, which indicated that the availability of metals in sediments was low. The risk assessment of interstitial waters confirmed that there was little chance of release of metals associated with acid-volatile sulfide into the water column. Values of the interstitial water criteria toxicity unit indicated that none of the concentrations of the studied metals exceeded the corresponding water quality thresholds of the US Environmental Protection Agency. Positive matrix factorization showed that the major sources of metals were related to anthropogenic activities. Further, if assessments are based on total heavy metal concentrations, the toxicity of heavy metals in sediment may be overestimated.     

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Σ_metal/AVS ratios with Σ_metal being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.     

Evaluation of the anthropogenic influx of metal and metalloid contaminants into the Moulay Bousselham lagoon, Morocco, using chemometric methods coupled to geographical information systems

Superficial and cored sediment samples from the Moulay Bousselham lagoon and sub-watershed were analyzed for Al, Fe, Cu, Zn, Pb, Mn, Ni, Cr, As, Hg, and Cd. The temporal and spatial distributions of the main contamination sources of heavy metals were identified and described using chemometric and geographic information system (GIS) methods. Sediments from coastal lagoons near urban and agricultural areas are commonly contaminated with heavy metals, and the concentrations found in surface sediments are significantly higher than those from 50–100 years ago. The concentrations of these elements decrease sharply with depth in the sediment column, and the elements are preferentially enriched in the <2-μm-sized fraction of the sediment. The zones of enhanced risk of heavy metals were detected by means of GIS-based geostatistical modeling. According to sediment pollution indices and statistical analysis, heavy metals (Pb, Cu, Ni, Zn, Cr, and Hg) that pose a risk have become largely enriched in the lagoon sediments during the recent period of agricultural intensification.     

Direct and indirect methods for chromium identification in industrial wastes

The examinations of selected wastes and stream sediments from the vicinity of a chemical plant by sequential extraction procedures and direct methods, SEM/EDX and XRD, were carried out in order to identify the different forms of chromium, particularly as they are released to potential mobility. The results show that the top and bottom waste samples contain 37,756 and 53,650 μg g¹ Cr, respectively, but about 7% and 2% of the total chromium type Cr(VI). The chemical extraction results show that the mobility of Cr in the upper part of the waste pile is significantly higher than in the bottom section; the exchangeable form of Cr accounts for 25% and < 1%, respectively, the last one irrespective of redox conditions. About 50% of Cr is associated with the reducible fraction of the top waste, and similar with the residual fraction in the bottom waste. Oxidation of the bottom waste shift some portion of Cr from residual to the moderately reducible fraction. The major Cr-forms in the river sediments are compounded with Fe-oxides. The < 2 μm size fraction of the selected sediment sample, particular enriched in chromium contained up to 73,000 μg g¹ Cr with about 95% of this in the moderately reducible fraction, predominantly bound with oxyhydroxides. SEM/EDX and XRD analysis of wastes and river sediment indicate that the main insoluble Cr-phase is ferroan — (Mg, Fe) (Cr, Al)²O⁴ which would be dissolved mainly in the residual fraction.     

A decision framework for possible remediation of contaminated sediments in the River Kymijoki, Finland

Background, aim, and scope  The paper describes the spatial contamination of the River Kymijoki, South-Eastern Finland, and the coastal region of the Gulf of Finland with PCDD/Fs and mercury. The findings of ecotoxicologial and human health studies are also reported, including environmental and human risk assessments. Sediments from the River Kymijoki, draining into the Gulf of Finland, have been heavily polluted by the pulp and paper industry and by chemical industries. A wood preservative, known as Ky-5, was manufactured in the upper reaches of the river between 1940 and 1984 causing severe pollution of river sediments with polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF). Moreover, the sediments have been polluted with mercury (Hg) from chlor-alkali production and the use of Hg as a slimicide in pulp and paper manufacturing. Materials and methods  An extensive sediment survey was conducted as well as sediment transport modeling, toxicity screening of sediment invertebrates, and a survey of contaminant bioaccumulation in invertebrates and fish. Studies on human exposure to PCDD/Fs and the possible effects on hypermineralization of teeth as well as an epidemiological study to reveal increased cancer risk were also conducted. An assessment of the ecological and human health risks with a null hypothesis (no remediation) was undertaken. Results  The sediment survey revealed severe contamination of river and coastal sediments with PCDD/Fs and Hg. The total volume of contaminated sediments was estimated to reach 5 × 10⁶ m³ and hot spots with extremely high concentrations (max 292,000 ng g⁻¹ or 1,060 ng I-TEQ g⁻¹ d.w.) were located immediately downstream from the pollution source (approximately 90,000 m³). Sediment contamination was accompanied by changes in benthic assemblages, but direct effects were masked by many factors. The fish showed only slightly elevated PCDD/F levels in muscle, but orders of magnitude higher in the liver compared with reference freshwater sites and the Baltic Sea. The concentrations in human fat did not reveal high human exposure in the Kymijoki area in general and was lower than in sea fishermen. The relative risk for total cancer among farmers was marginally higher (RR = 1.13) among those living close to the river, compared with farmers living further away, and the possibility of increased cancer risk cannot be ruled out. A conservative risk assessment revealed that the present probability of exceeding the WHO upper exposure limit of 4 pg WHO-TEQ kg⁻¹ d⁻¹ for PCDD/Fs and DL-PCBs was 6%. The probability of exceeding the WHO limit value of 0.23 μg kg⁻¹ d⁻¹ for methyl mercury was estimated to be notably higher at 62%. Based on these studies and the estimated risks connected with different remediation techniques a general remediation plan with cost benefit analysis was generated for several sub-regions in the river. Dredging, on-site treatment, and a close disposal of the most contaminated sediments (90,000 m³) was suggested as the first phase of the remediation. The decision regarding the start of remediation will be made during autumn 2008. Conclusions  The sediments in the River Kymijoki are heavily polluted with PCDD/Fs and mercury from earlier chlorophenol, chlor-alkali, and pulp and paper manufacturing. A continuous transport of contaminants is taking place to the Gulf of Finland in the Baltic Sea. The highly increased PCDD/F and Hg levels in river sediments pose an ecotoxicological risk to benthic fauna, to fish-eating predators and probably to human health. The risks posed by mercury exceed those from PCDD/Fs and need to be evaluated for (former) chlor-alkali sites and other mercury releasing industries as one basis for remediation decision making. Recommendations and perspectives  The studies form the basis of a risk management strategy and a plan for possible remediation of contaminated sediments currently under consideration in the Southeast Finland Regional Environment Centre. It is recommended that a detailed restoration plan for the most seriously contaminated areas should be undertaken. Based on current knowledge, the restoration of the whole river is not feasible, considering the current risk caused by the contaminated sediment in the river and the costs of an extensive restoration project. The experiences gained in the present case should be utilized in the evaluation of PCDD/F- and mercury-contaminated sites in other countries. The case demonstrates that the historic reservoirs are of contemporary relevance and should be addressed, e.g., in the national implementation plans of the Stockholm Convention. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Bleached kraft pulp mill discharged organic matter in recipient lake sediment

Environmental properties of organic matter contained halogen and sulfur were studied in sediments of bleached kraft pulp mill effluent (BKME) recipient lakes and 2 m³ outdoor enclosures (mesocosms). The BKME contributed to 1% (v/v) of the total water flow in the lake downstream of the pulp mill where the sediments contained 1.7 to 4 mg of tetrahydrofuran extractable organic halogen (EOX-Cl) and 0.6 to 0.8 mg of tetrahydrofuran extractable organic sulfur (EOS-S) g⁻¹ of organic matter. Upstream sediment contained 0.03 mg of EOXCl and 0.7 mg of EOS-S g⁻¹ of organic matter. EOX was a better indicator for the influence of BKME in the recipient sediment than EOS. The polarity of BKME contained EOX corresponded to log K^ow of < 1, and that of the downstream sediment contained EOX to > 4.5. HP-SEC analysis of the molecular weight distribution (MWD) of the EOX showed a peak between 300 to 600 g mol⁻¹ for the BKME and between 1000 to 2000 g mol⁻¹ for the downstream sediment. The MWD of the BKME contained EOS peaked at 300 to 1000 g mol⁻¹, and that of the downstream sediment contained EOS at 1000 to 5000 g mol⁻¹. These results indicate that BKME contained organic halogen and sulfur undergo major structural transformations when incorporated into sediment. The biota-to-sediment accumulation factor (BSAF) of EOX from sediments formed downstream of the mill and in the mesocosms to the lipids ofLumbriculus variegatus was 0.4 to 0.7. This is of a similar order of magnitude to the BSAF reported for 2,3,7,8-tetrachlorodibenzop-dioxin and 2,3,7,8-tetrachlorodibenzofuran.     

Metal partitioning in river sediments measured by sequential extraction and biomimetic approaches

We quantified the concentrations and distributions of metals (Cd, Cr, Cu, Ni, Pb, and Zn) in the sediments of Tuen Mun River, Hong Kong. The potential bioavailability of metals was assessed with a biomimetic extraction method using the sipunculan gut juices. The sediments were characterized by relatively high concentrations of trace metals. Field collected sediments were highly anoxic and the ratio of simultaneously extractable metal (sigmaSEM) to acid volatile sulfide (AVS) was much less than one in these sediments. The majority (>67%) of Cd, Pb, and Zn were bound to AVS, thus their concentrations in the sediment porewater were low. In contrast, Ni was little bound to AVS due to its lower ratios of SEM-Ni to total Ni concentrations. For Cu, relatively high concentrations in the sediment porewater was found, and total organic carbon, AVS and other resistant sulfide phase were the controlling factors for sedimentary Cu partitioning. Net metal adsorption from gut juices to anoxic sediments was observed in metal extraction experiments, suggesting that AVS determined the bioaccumulation and potential bioavailability of most metals in these sediments. Extraction of metals from the oxidized sediments by the gut juices was mainly attributed to metal redistribution from AVS to other geochemical phases. The gut juices were the most effective solvent or extractant than the simple electrolyte solution [I (NaNO(3)) = 0.01 M] and the natural overlying water. Cd was more easily extracted from the oxidized sediments than Zn that tended to have a stronger binding affinity with Fe-Mn oxide, clay and organic matter. The application of partial removal techniques in metal extraction experiments further demonstrated the differential controls of various sediment geochemical phases in affecting metal bioavailability, with the order of TOC > Fe-Mn oxides > carbonate.     

Consequences and implication of heavy metal spatial variations in sediments of the Keelung River drainage basin, Taiwan

A great deal of effort was enforced to reduce the pollution of the Keelung River in the past 20 years. A set of sediments covering most of the Keelung River drainage basin was analyzed for bulk sediment heavy metal concentrations, grain size content and Pb-210 dating in order to understand the spatial variations of sediment heavy metal contents as well as to evaluate the effectiveness of pollution control. The results showed that anthropogenic pollution and grain size are two of the most important factors in controlling spatial variations of metals in the Keelung River sediments. In addition, little reduction of sediment heavy metal concentrations was observed in the Keelung River drainage basin. Large spatial variations of metals and grain size were observed. High concentrations of zinc, copper, lead and cadmium were found in sediments near the main outlets of the adjacent Da-Wu-Lun Industrial Park and municipal waste drainage systems. Anthropogenic sources of heavy metal have altered the natural sediment heavy metal distributions. Positive linear relationships between aluminum, iron and fine-grained sediments showed that spatial grain size variations controlled the natural aluminum and iron concentrations in sediments. Zinc, copper, lead and cadmium contents were much higher than those measured 15 years ago. The unusually high concentrations of heavy metals, high enrichment factors and their rapid increases with time in Pb-210 dated core showed that the efforts in heavy metal reduction were futile. A proper regulation to prevent further heavy metals from entering into the river is urgently needed.     

Relationship among parameters of lake polluted sediments evaluated by multivariate statistical analysis

In the attempt to assess the relationship and interdependency among sediment toxic pollutants, in particular heavy metals, polycyclic aromatic hydrocarbons (PAH), and linear alkyl sulfonates (LAS) and some of the sediment typical components: inorganic carbon (IC), organic material (OM) and acid volatile sulphides (AVS), multivariate techniques of statistical analysis have been applied to a set of chemical data obtained by the analysis of the sediments of the Trasimeno Lake, a central Italy lake characterized by a large surface (128 km(2)) and a low mean depth (about 4.5 m). The results of principal component analysis (PCA) show interrelationships between: OM content and PAH, Pb, and Cu concentrations of the sediments, LAS and AVS, and AVS and IC. The effect of the different sampling periods on sediment composition and contamination level, and the clustering of the sampling sites as a consequence of pollutant load are also shown. The principal component bi-plot of the variables and samples indicates that PAH have the greatest influence on the separation of samples in the different sampling periods.     

Oxidation of acid-volatile sulfide in surface sediments increases the release and toxicity of copper to the benthic amphipod Melita plumulosa

Acid-volatile sulfides (AVS) are an important metal-binding phase in sediments. For sediments that contain an excess of AVS over simultaneously extracted metal (SEM) concentrations, acute or chronic effects should not result from the metals Cd, Cu, Ni, Pb and Zn. While AVS phases may exist in surface sediments, the exposure to dissolved oxygen may oxidize the AVS and release metals to more bioavailable forms. We investigated the role of oxidation of AVS, and specifically copper sulfide phases, in surface sediments, in the toxicity to juveniles of the epibenthic amphipod, Melita plumulosa. Sediments containing known amounts of copper sulfide were prepared either in situ by reacting dissolved copper with AVS that had formed in field sediments or created in sediments within the laboratory, or by addition of synthesised CuS to sediments. Regardless of the form of the copper sulfide, considerable oxidation of AVS occurred during the 10-d tests. Sediments that had a molar excess of AVS compared to SEM at the start of the tests, did not always have an excess at the end of the tests. Consistent with the AVS-SEM model, no toxicity was observed for sediments with an excess of AVS throughout the tests. However, the study highlights the need to carefully consider the changes in AVS concentrations during tests, and that measurements of AVS and SEM concentrations should carefully target the materials to which the organisms are being exposed throughout tests, which in the case of juvenile M. plumulosa is the top few mm of the sediments.     

Influence of Spartina alterniflora on the mobility of heavy metals in salt marsh sediments of the Yangtze River Estuary, China

Using bio-disturbed sulphide to trace the mobility and transformation of Cu, Pb, Ni and Zn in the sediments of the Spartina alterniflora-dominated salt marsh in the Yangtze River Estuary, measurements were made of the seasonal variations of acid-volatile sulphide (AVS) and of the simultaneously extracted metals (SEM) in the rhizosphere sediments. Microcosm incubation experiments recreating flooding conditions were conducted to evaluate the effect of AVS and other metal binding phases upon the dynamics of Cu, Pb, Ni and Zn in the salt marsh sediments. The results demonstrate that the ratio values of SEM/AVS have a significant seasonal variation in the rhizosphere sediments and that the anoxic conditions in the sediments were likely enhanced by S. alterniflora during the summer and autumn compared with the anoxic conditions resulting from the native species Phragmites australis and Scirpus mariqueter. The incubation experiments suggest that Fe(III) and Mn(IV/III) (hydr)oxides provide important binding sites for heavy metals under oxic conditions, and sulphide provides important binding sites for the Cu and Pb under anoxic conditions. Our observations indicate that the mobility of heavy metals in the salt marsh sediments is strongly influenced by biogeochemical redox processes and that the invasive S. alterniflora may increase the seasonal fluctuation in heavy metal bioavailability in the salt marsh ecosystem.     

A Preliminary Evaluation of the DDT Contamination of Sediments in Lakes Natron and Bogoria (Eastern Rift Valley,Africa)

Dichlorodiphenyltrichloroethane (DDT) is still used in Africa for the indoor control of malaria and it may represent a potential hazard for wildlife. The littoral sediments of two alkaline-saline lakes, Natron (Tanzania) and Bogoria (Kenya), in the Eastern Rift Valley, supporting large populations of lesser flamingos (Phoeniconaias minor), were analysed for DDT residues. Physical–chemical analyses (temperature, conductivity, pH and dissolved oxygen) were also performed on the water of the two lakes and in the tributaries of Lake Natron, to evaluate the influence of the environmental variables on pollutant occurrence. At Lake Natron, around 1 km from the sediment collection sites, tree leaves of Acacia tortilis were also collected. The main metabolite found in all sediment samples was pp’DDE, whilst equal concentrations of pp’DDT and pp’DDE were measured in acacia leaves. The levels of DDTs measured in the sediments were within 5.9–30.9 ng g⁻¹ d.w., reaching the maximum value in a tributary of Lake Natron. On the whole, the contamination of Lake Natron and Lake Bogoria basins seems to be quite moderate. Nevertheless, the pp’DDE/pp’DDT ratio equals 1 in the Acacia tortilis leaves, which makes one suppose that the input of the parent compound was rather recent and could have been from aerial transport or dust from relatively close-by old pesticides storage sites.     

Geostatistical Assessment of the Impact of World War I on the Spatial Occurrence of Soil Heavy Metals

Previous research showed a regional Cu enrichment of 6 mg kg⁻¹ in the top soil of the Ypres war zone (Belgium), caused by corrosion of WWI shell fragments. Further research was required since in addition to Cu, also As, Pb, and Zn were used during the manufacturing of ammunition. Therefore, an additional data collection was conducted in which the initial Cu data set was tripled to 731 data points and extended to eight heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) which permitted (1) to evaluate the environmental impact of the heavy metals at a regional scale and (2) to assess their regional spatial occurrence by performing an optimized geostatistical modeling. The results showed no pollution at a regional scale, but sometimes locally concentrations exceeded the soil sanitation threshold, especially for Cu, Pb, and Zn. The spatial patterns of Ni and Cr were related to variations in soil texture whereas the occurrences of Cu and Pb were clearly linked to WWI activities. This difference in spatial behavior was confirmed by an analysis of coregionalization.     

Using stable lead isotopes to trace heavy metal contamination sources in sediments of Xiangjiang and Lishui Rivers in China

Lead isotopes and heavy metal concentrations were measured in two sediment cores sampled in estuaries of Xiangjiang and Lishui Rivers in Hunan province, China. The presence of anthropogenic contribution was observed in both sediments, especially in Xiangjiang sediment. In the Xiangjiang sediment, the lower ²⁰⁶Pb/²⁰⁷Pb and higher ²⁰⁸Pb/²⁰⁶Pb ratio, than natural Pb isotope signature (1.198 and 2.075 for ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), indicated a significant input of non-indigenous Pb with low ²⁰⁶Pb/²⁰⁷Pb and high ²⁰⁸Pb/²⁰⁶Pb. The corresponding concentrations of heavy metals (As, Cd, Zn, Mn and Pb) were much higher than natural values, suggesting the contaminations of heavy metals from extensive ore-mining activities in the region.     

Assessment of human health risks and pollution index for heavy metals in farmlands irrigated by effluents of stabilization ponds

Areas contaminated with heavy metals can pose major risks to human health and ecological environments. The aims of this study are to assess human health risk and pollution index for heavy metals in agricultural soils irrigated by effluents of stabilization ponds in Birjand, Iran. The results revealed that the levels of Cr, Mn, Zn, Fe, Cu, Cd, and Pb were in range of 70.3–149.65, 355–570, 31.15–98.45, 23,925–29,140, 22.75–25.95, 0.17–6.51, and 8.5–23.5 mg/kg in topsoils, respectively. Total hazard index values from heavy metals through three exposure routes for adults and children were 9.13E−01 and 1.10, respectively, indicating that there was non-carcinogenic risk for children. The total risk of carcinogenic metals (Cr, Cd, and Pb) through the three exposure routes for adults and children was 1.06E−04 and 9.76E−04, respectively, which indicates that the metals in the soil will not induce carcinogenic risks to these age groups. Pollution levels of heavy metals in soil samples including enrichment factor (EF), contamination factor (CF), pollution load index (PLI), and geo-accumulation index (Igeo) showed heavy metal contamination of agricultural soils. The results of the present study provide basic information about heavy metal contamination control and human health risk assessment management in the study area.     

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g⁻¹ dry weight, with a mean value of 9.2 ng g⁻¹. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.     

Adsorption of lambda-cyhalothrin and cypermethrin on two typical Chinese soils as affected by copper

Background, aim, and scope  Pesticides and heavy metals pollution in soil environment has become a serious problem in many countries including China. Repeated applications of bordeaux mixture (a blend of copper sulfate and calcium hydroxide) and pyrethroid (Pys) insecticides have led to elevated copper (Cu) and Pys concentrations in vineyard surface soils. However, few studies focused on the interaction of Pys and heavy metals in the soil environment. Our previous studies had indicated the combined effect of cypermethrin (CPM) and Cu on soil catalase activity. Also, we had suggested that the addition of Cu could catalyze photo-degradation of CPM and lambda-cyhalothrin (λ-CHT) in aqueous solution and restrain their degradation in soil. To better understand the potential influence of Cu on the fate of Pys in the soil environment, the aim of the present work was to examine the effect of Cu on the adsorption of λ-CHT and CPM on two typical Chinese soils with different soil characteristics, which was one of the key processes controlling the fate of Pys, and to provide more information about the potential ecological risk of chemicals on the soil ecosystem. Fourier transform infrared and point charges analysis using the MOPAC program of the Gaussian system were also used to reveal the probable adsorption mechanism of λ-CHT and CPM on soils. Materials and methods  Two vineyard soils with different properties were chosen as experimental samples. They were sampled from 0 to 10 cm, dried, and sieved to 2 mm. Each soil was spiked with copper sulfate solution to obtain the following total soil Cu concentrations: 100, 200, 400, 800, and 1,600 mg·kg⁻¹. The treated soils were incubated for 2 weeks and then dried at 20°C. For each soil sample and at each soil Cu concentration, the adsorption of λ-CHT and CPM was measured using a batch equilibrium method. The concentration of λ-CHT was determined by HPLC, and the amount of λ-CHT and CPM adsorbed by the soil sample at equilibrium was determined by the difference between the initial and equilibrium concentrations in solution corrected by the blank adsorption measurement. Results  Without the addition of Cu, the adsorption of λ-CHT and CPM on Black soil is greater than that on Red soil, while the adsorption of λ-CHT on both soils is significantly stronger than that of CPM. As the soil Cu concentration increased from 19 (or 18; background) to 1,600 mg·kg⁻¹, the adsorption coefficient (K _d) of λ-CHT decreased from 12.2 to 5.9 L·kg⁻¹ for Red soil, and from 26.1 to 16.8 L·kg⁻¹ for Black soil, whereas the CPM adsorption coefficient in both soils decreased nearly by 100% (K _d decreased from 9.4 to 0.2 L·kg⁻¹ for Red soil and from 16.2 to 0.5 L·kg⁻¹ for Black soil). Discussion  Pys adsorption is a surface phenomenon which depends on the surface area and the organic matter content. Thus, the Black soil, having higher organic matter and greater surface area than that of the Red soil, show greater adsorption affinity to λ-CHT and CPM. In our study, the different adsorption affinity of the two Pys was obtained, which was probably attributed to differences with respect to their physical–chemical properties. Further comparison upon the two Pys was conducted. The point charges of halogen atoms in the λ-CHT and CPM were calculated, the differences of which probably lead to the fact that λ-CHT has a stronger binding capacity to soils than CPM. Also, FTIR spectra show that competitive adsorption occurs between CPM and Cu for the same adsorption sites, which is responsible for the obtained suppression of CPM adsorption affected by Cu. Conclusions  Lambda-cyhalothrin shows a significantly stronger adsorption than cypermethrin on both soils. This phenomenon may be due to several reasons: (1) λ-CHT has lower solubility and a higher octanol–water partition coefficient value than CPM; (2) λ-CHT consists of specific isomers, whereas CPM is mixtures of eight different isomers; (3) the chlorine and fluorine atoms in the λ-CHT have a negative point charge, whereas the chlorine atoms in the CPM have a positive point charge. As the soil Cu concentrations increased from 19 (or 18) mg·kg⁻¹ to 1,600 mg·kg⁻¹, the adsorption coefficient of λ-CHT and CPM decreased on both soils. This is mainly due to a competition between Cu and Pys for occupying the adsorption sites on soils. The information from this study have important implications for vineyard and orchard soils, which often contain elevated levels of Cu and Pys. These results are also useful in assessing the environmental fate and health effect of λ-CHT and CPM. Recommendations and perspectives  It is important for environmental scientists and engineers to get a better understanding of soil–metal–organic contaminant interactions. However, pesticide adsorption involves complex processes, and shortcomings in understanding them still restrict the ability to predict the fate and behavior of pesticide. Therefore, considerable research should be carried out to understand the mechanism of interaction between Pys and heavy metal on soils clearly.     

Assessment of heavy metal contamination in Hindon River sediments: a chemometric and geochemical approach

The aim of this study was to assess the level of heavy metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in the surface sediments of the Hindon River, India that receives both treated and untreated municipal and industrial discharges generated in and around Ghaziabad, India. Mean metals concentrations (mg kg⁻¹) were in the range of; Cu: 21.70-280.33, Cd: 0.29-6.29, Fe: 4151.75-17318.75, Zn: 22.22.50-288.29, Ni: 13.90-57.66, Mn: 49.55-516.97, Cr: 17.48-33.70 and Pb: 27.56-313.57 respectively. Chemometric analysis was applied to identify contribution sources by heavy metals while geochemical approaches (enrichment factor and geo-accumulation index) were exploited for the assessment of the enrichment and contamination level of heavy metals in the river sediments. Chemometric analysis suggested anthropic origin of Cu, Cd, Pb, Zn, and Ni while Fe showed lithogenic origin. Mn and Cr was associated and controlled by mixed origin. Geochemical approach confirms the anthropogenic influence of heavy metal pollution in the river sediments. The study suggests that a complementary approach that integrates chemometric analysis, sediment quality criteria, and geochemical investigation should be considered in order to provide a more accurate appraisal of the heavy metal pollution in river sediments. Consequently, it may serve to undertake and design effective strategies and remedial measures to prevent further deterioration of the river ecosystem in future.