Internal cycle modeling and environmental assessment of multiple cycle consumer products

Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast and slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying reachable and efficient reuse/recycle targets for consumer products and in planning return via appropriate labelling and digital coding for enhancing environmental performance, while satisfying consumer demand.     

A new rate index for environmental monitoring of combined reuse/recycle packaging systems.

It is shown that the conventional recycling rate fails to reflect environmental performance for packaging flows with both recycle and reuse. The reuse rate, the total number of reuse trips and the reuse- lifetime are also shown to be inadequate. A new rate index defined in terms of the total amount of packaging material reaching the consumer is proposed. It reflects immediate improvements in environmental impact according to specific criteria and it reduces to the conventional rate for systems with only recycle. Albeit this shortcut environmental assessment is not entirely comprehensive and does not unveil a full sustainability profile, it may be useful for immediate packaging flow evaluation and policy implementation. For given packaging production technology it reveals a specific maximum level on recycling, below which environmental impacts from processing are limited or reduced, even if production level grows. Cleaner technologies in reprocessing of recycled materials may elevate this maximum level while still limiting or reducing environmental impacts.     

A management system for end-of-life tyres: a Portuguese case study

The European Union introduced several policy instruments based in the extended producer responsibility (EPR) in order to improve the environmental performance of products and services through their life cycles. In this context, the Portuguese government decided to apply the EPR concept to tyres, and producers were obliged to constitute an end-of-life management system to promote the collection, recycling and reuse of end-of-life (EOL) tyres. This required producers, distributors, recyclers and retreaders to be identified and characterized, and local processing infrastructures to be analyzed. The information was used to design an economically optimised EOL tyre management system while promoting the activity of all EOL operators in order for the imposed collecting and recovery targets to be fulfilled. This paper discusses the interaction between the different governmental, private and academic institutions for the creation of the integrated management system for EOL tyres, the approach taken, the technical, political and legal aspects underneath them, as well as the environmental consequences induced by the creation of the management system. The results obtained during the first years of operation are reported and show an increase in the collection and recycling of EOL tyres and the consolidation of the collection and processing infrastructures.     

Reutilisation-extended material flows and circular economy in China

Circular economy (CE), with its basic principle of Reduce, Reuse, and Recycle, has been determined as the key strategy for the national development plan by the Chinese government. Given the economy-wide material flow analysis (EW-MFA) that leaves the inner flow of resource reutilisation unidentified, the reutilisation-extended EW-MFA is first introduced to evaluate and analyse the material input, solid waste generation, and reutilisation simultaneously. The total amount of comprehensive reutilisation (CR) is divided into three sub-flows, namely, reutilisation, recycle, and reuse. Thus, this model is used to investigate the resource CR in China from 2000 to 2010. China’s total amount of CR and its sub-flows, as well as the CR rate, remain to have a general upward trend. By the year 2010, about 60% of the overall solid waste generation had already been reutilised, and more than 20% of the total resource requirement was reutilised resource. Moreover, the growth patterns of the CR sub flows show different characteristics.Interpretations of resource reutilisation-related laws and regulations of CE and the corresponding policy suggestions are proposed based on the results.     

ICT reuse in socio-economic enterprises

In Europe, socio-economic enterprises such as charities, voluntary organisations and not-for-profit companies are involved in the repair, refurbishment and reuse of various products. This paper characterises and analyses the operations of socio-economic enterprises that are involved in the reuse of Information and Communication Technology (ICT) equipment. Using findings from a survey, the paper specifically analyses the reuse activities of socio-economic enterprises in the UK from which Europe-wide conclusions are drawn. The amount of ICT products handled by the reuse organisations is quantified and potential barriers and opportunities to their operations are analysed. By-products from reuse activities are discussed and recommendations to improve reuse activities are provided. The most common ICT products dealt with by socio-economic enterprises are computers and related equipment. In the UK in 2010, an estimated 143,750 appliances were reused. However, due to limitations in data, it is difficult to compare this number to the amount of new appliances that entered the UK market or the amount of waste electrical and electronic equipment generated in the same period. Difficulties in marketing products and numerous legislative requirements are the most common barriers to reuse operations. Despite various constraints, it is clear that organisations involved in reuse of ICT could contribute significantly to resource efficiency and a circular economy. It is suggested that clustering of their operations into “reuse parks” would enhance both their profile and their products. Reuse parks would also improve consumer confidence in and subsequently sales of the products. Further, it is advocated that industrial networking opportunities for the exchange of by-products resulting from the organisations’ activities should be investigated. The findings make two significant contributions to the current literature. One, they provide a detailed insight into the reuse operations of socio-economic enterprises. Previously unavailable data has been presented and analysed. Secondly, new evidence about the by-products/materials resulting from socio-economic enterprises’ reuse activities has been obtained. These contributions add substantially to our understanding of the important role of reuse organisations.     

住宅小区雨水资源化与中水回用模式与技术

住宅小区雨水资源化利用与中水回用是建设节水型城市,实现水资源可持续利用的重要组成部分．住宅小区的雨水资源化利用技术将雨水收集、雨水分散处理、雨水集中利用、雨水渗透等技术进行集成优化,具有处理效果好、雨水利用率高、管理方便的优点。住宅小区中水回用属于封闭式污水再生回用系统,采用膜生物反应器（MBR）技术作为小区中水回用技术,具有占地面积少、工艺流程短、处理效率高等优点。     

National and subnational outcomes of waste management policies for 1718 municipalities in Japan: development of a bottom-up waste flow model and its application to a declining population through 2030

Journal of Material Cycles and Waste Management - Japan has been promoting 3R (reduce, reuse, and recycle) policies for several decades, but the recycling rate of the whole country has leveled off,...     

Dynamic stock and end-of-life flow identification based on the internal cycle model and mean-age monitoring

Planning of end-of-life (EoL) product take-back systems and sizing of dismantling and recycling centers, entails the EoL flow (EoLF) that originates from the product dynamic stock (DS). Several uncertain factors (economic, technological, health, social and environmental) render both the EoLF and the remaining stock uncertain. Early losses of products during use due to biodegradation, wear and uncertain factors such as withdrawals and exports of used, may diminish the stock and the EoLF. Life expectancy prediction methods are static, ignoring early losses and inapt under dynamic conditions. Existing dynamic methods, either consider a single uncertain factor (e.g. GDP) approximately or heuristically modelled and ignore other factors that may become dominant, or assume cognizance of DS and of the center axis of the EoL exit distribution that are unknown for most products. As a result, reliable dynamic EoLF prediction for both durables and consumer end-products is still challenging. The present work develops an identification method for estimating the early loss and DS and predicting the dynamic EoLF, based on available input data (production + net imports) and on sampled measurements of the stock mean-age and the EoLF mean-age. The mean ages are scaled quantities, slowly varying, even under dynamic conditions and can be reliably determined, even from small size and/or frequent samples. The method identifies the early loss sequence, as well as the center axis and spread of the EoL exit distribution, which are subsequently used to determine the DS and EoLF profiles, enabling consistent and reliable predictions.     

The potential of recycling and reusing municipal solid waste incinerator ash in Taiwan

By 2004, there were 19 municipal solid waste incinerators (MSWI) with a total yearly treatment capacity of 7.72 million tons in service in Taiwan. All 19 incinerators operated daily to generate about 1.05 million tons of incinerator ash, including bottom ash and stabilized fly ash in 2003, and the average ash yield is 18.67%. The total number of incinerators is expected to increase to 27, serving almost all cities in Taiwan by 2007. The authors have suggested a set of criteria based on the yield of incinerator ash (Phi) to study the ash recycle and reuse potential. The Taiwan Environmental Protection Administration has studied the treatment and reuse of MSWI ashes for many years and collected references on international experience accumulated by developed nations for establishing policies on treatment and reuse of MSWI ashes. These citations were analyzed as the basis for current governmental decision making on policies and factors to be considered for establishing policies on recycle and reuse of MSWI ashes. Feasible applications include utilization of ashes, which after sieving and separation of metal particles, produce granular materials. When granular materials comply with TCLP limitations, they can be utilized as cement additives or road base. The procedures of evaluation have been proposed in the performance criteria to be included in the proposed decision-making process of ash utilization.     

A flexible environmental reuse/recycle policy based on economic strength

Environmental policies based on fixed recycling rates may lead to increased environmental impacts (e.g., landfilled wastes) during economic expansion. A rate policy is proposed, which is adjusted according to the overall strength or weakness of the economy, as reflected by overall packaging demand and consumption, production and imports-exports. During economic expansion featuring rising consumption, production or exports, the proposed flexible policy suggests a higher reuse/recycle rate. During economic slowdown a lower rate results in lower impacts. The flexible target rates are determined in terms of annual data, including consumption, imports-exports and production. Higher environmental gains can be achieved at lower cost if the flexible policy is applied to widely consumed packaging products and materials associated with low rates, or if cleaner recycling technology is adopted.     

Greenhouse gases emissions from solid waste: an analysis of Expo 2010 Shanghai,China

The management of greenhouse gases (GHGs) emissions is currently a very important environmental issue. Mega-event organizers and host cities have attached great importance to GHGs emissions associated with event-related activities. However, GHGs emissions from event solid waste have never been thoroughly discussed. This study investigated GHGs emissions of major event’s solid waste using life cycle assessment, based on Shanghai Expo case. The results showed that GHGs from collecting and sorting, transportation and landfill treatment amount to 9790 t CO₂e. And the emission intensity is estimated to be 134 g CO₂e per event service. GHGs reduction from recycling amounts to 48 kt CO₂e, with 78 % of these the result of construction waste recycle. It illustrates that waste recycle plays a vital role in GHGs mitigation. Finally, the study suggests that the concept of waste avoidance, waste reuse and waste recycle is an effective waste management to mitigate climate change and should be implemented in major event to achieve the goal of green event.     

Reuse of residues arising from lead batteries recycle: a feasibility study

The performance of products arising from the stabilization/solidification of slags from lead batteries recycle into a Portland cement matrix has been evaluated not only in order to get a stabilized waste to be disposed of according to the current legislation, but also to obtain a recyclable material, with both economic and environmental benefits. Under this respect a detailed characterization of raw slags has been performed and different slag-cement samples have been prepared by varying the slag content. The parameters related to the cementation process have been evaluated and a series of tests on the final waste forms have been carried out, aimed at assessing both mechanical performance and leaching behaviour. In spite of the acceptable values for flexural, compressive and tensile strength, however, the high release of lead from the solidification products seems to be a limiting factor for a reusable material. While explanations of such phenomenon are given (high alkalinity of Portland cement; early "doping" of cementitious components by lead in the amorphous state), the main conclusion of the research work is that further efforts should be addressed to the adoption of a different or a modified incorporation matrix.     

瑞典生活垃圾处理方式及效果分析

生活垃圾分类回收管理措施正在我国各大城市全面实施。通过对瑞典生活垃圾层级管理和4种处理方式的介绍,对瑞典垃圾回收再利用效果进行分析,为我国推进生活垃圾分类回收再利用工作,提供可借鉴经验和参考。     

纸塑铝复合包装废物的回收与再生利用现状

通过对典型的垃圾填埋场和复合包装再生利用企业的调研,分析了我国现有复合包装废物产生与回收再生利用的现状.并针对纸塑铝复合包装材料的结构和特点,对现有复合包装材料的再生利用技术进行研究比较,指出了我国复合包装回收利用过程中亟待解决的问题及未来的研究方向.     

Evaluation of current material stock and future demolition waste for urban residential buildings in Jakarta and Bandung,Indonesia: embodied energy and CO<Subscript>2</Subscript> emission analysis

First, this paper evaluates the current building material stock and future demolition waste for urban residential buildings in the cities of Jakarta and Bandung using a material-flow analysis. The actual on-site building measurements were conducted in Jakarta (2012) and Bandung (2011), focusing particularly on unplanned houses, to obtain building material inventory data. A total of 297 houses were investigated in Jakarta, whereas 247 houses were measured in Bandung. Second, this paper analyses the embodied energy and CO₂ emissions of building materials through an input–output analysis. The results show that, overall, the total material input intensity for the houses is 2.67 ton/m² in Jakarta and 2.54 ton/m² in Bandung. Two scenarios with zero and maximum reuse/recycling rates were designed to predict future demolition waste and the embodied energy/CO₂ emissions of building materials in Jakarta. Closed- and open-loop material flows were applied. If the maximum reuse/recycling rates are applied to the closed- and open-loop material flows in Jakarta, then it would become possible to not only decrease the final disposal waste (from 123.9 to 2.1 million ton) but also reduce the corresponding embodied energy (from 247.8 to 192.1 PJ) and CO₂ emissions (from 24.3 to 19.2 million ton CO₂-eq) compared with the zero reuse/recycling scenario from 2012 to 2020.     

The Stochastic Approach in Groundwater Modeling for the Optimization of Hydraulic Barriers

A three‐dimensional stochastic groundwater flow and contaminant transport model has been developed to optimize groundwater containment at an industrial site in Italy and to define likely future contaminant distribution under different confinement or remediation scenarios. The transport model was first calibrated using a deterministic approach to simulate the hydrochemical conditions prior to the optimization of groundwater extraction, then a probabilistic simulation was conducted to predict future contaminant concentrations. The stochastic approach allowed introducing an estimate of the uncertainty of the hydrogeological and chemical parameters into the model, simulating the probability density function of the contaminant concentrations after the application of the optimized barrier wells pumping rates. This allowed the calculation of the time required for the concentrations of each modeled parameter to decrease to under the regulatory limit at the compliance point, and associating the related uncertainty into the model. Quantifying the model prediction uncertainty facilitated a better understanding of the site environmental conditions, providing the site owners additional information for managing the site and allocating related economic resources. ©2016 Wiley Periodicals, Inc.     

人工湿地分散式污水处理系统的设计和运行

采用由预处理单元、水平潜流人工湿地单元、消毒单元和污泥干化单元组成的分散式污水处理系统对采油区生活点污水进行了处理和资源化利用。核心工艺单元水平潜流人工湿地单元的优化设计参数为:人工湿地宽20 m、长80 m,采用多段串联布置形式。分散式污水处理系统实际处理水量为92~136 m3/d,在5年的实际运行过程中,COD,BOD5,NH3-N,SS的平均去除率分别为75.9%,77.3%,96.0%,96.1%。处理后出水经消毒后的水质优于GB/T18920—2002《城市污水再生利用城市杂用水水质》标准中绿化用水的水质,可作为绿化灌溉用水回用;干化后的栅渣和污泥可作为绿化肥料使用,能实现污水的资源化利用和处理系统的零排放。     

Scenario of solid waste reuse in Khulna city of Bangladesh

The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d^?1 solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.     

Improving the layout of recycling centres by use of lean production principles

There has been increased focus on recycling in Sweden during recent years. This focus can be attributed to external environmental factors such as tougher legislation, but also to the potential gains for raw materials suppliers. Recycling centres are important components in the Swedish total recycling system. Recycling centres are manned facilities for waste collection where visitors can bring, sort and discard worn products as well as large-sized, hazardous, and electrical waste. The aim of this paper was to identify and describe the main flows and layout types at Swedish recycling centres. The aim was also to adapt and apply production theory for designing and managing recycling centre operations. More specifically, this means using lean production principles to help develop guidelines for recycling centre design and efficient control.Empirical data for this research was primarily collected through interviews and questionnaires among both visitors and employees at 16 Swedish recycling centres. Furthermore, adapted observation protocols have been used in order to explore visitor activities. There was also close collaboration with a local recycling centre company, which shared their layout experiences with the researchers in this project.The recycling centres studied had a variety of problems such as queues of visitors, overloading of material and improper sorting. The study shows that in order to decrease the problems, the recycling centres should be designed and managed according to lean production principles, i.e. through choosing more suitable layout choices with visible and linear flows, providing better visitor information, and providing suitable technical equipment. Improvements can be achieved through proper planning of the layout and control of the flow of vehicles, with the result of increased efficiency and capacity, shorter visits, and cleaner waste fractions. The benefits of a lean production mindset include increased visitor capacity, waste flexibility, improved sorting quality, shorter time for visits and improved working conditions.