Fine-scale,spatial and temporal assessment methods for feral swine disturbances to sensitive plant communities in south-central Florida

Feral swine are estimated to annually cost hundreds of millions of dollars in economic loss to property and agriculture in the USA, while their ecological consequences remain largely unmeasured. Using submeter-accurate Global Positioning System technology over a multiyear project, we are quantifying in a novel way the spatial and temporal attributes of swine rooting damage within 587 ha of ecologically sensitive wetland plant communities at Avon Park Air Force Range in south-central Florida. We delineated damage polygons from 0.0023 to 4,335 m² and were able to document recurrent damage through time at most sites during each assessment. For each polygon, we also estimated the age of damage and assigned to it a severity index, qualities of the rooting in which we detected changes in proportions over time. Spatially explicit damage assessments at fine scales conducted over several years can assist land managers in determining effects of rooting on rare plant populations, and will allow investigators to hypothesize what factors are driving patterns of this disturbance across ecologically sensitive plant communities.     

Feral swine disturbance at important archaeological sites

Feral swine are well known as environmentally destructive invasive animals in many areas around the world, where they degrade native habitats, harm rare plant and animal species, damage agricultural interests, and spread disease. We provide the first quantification of their potential as agents of disturbance at archaeological sites. Our study was conducted in south-central Florida at Avon Park Air Force Range, a base comprising over 40,000 ha and containing many archaeological sites. To determine the identifiable prevalence of feral swine disturbance, we examined 36 sites registered with the Florida State Historic Preservation Office and also eligible for inclusion in the National Register of Historic Places (NRHP). Moreover, we evaluated the extent of swine disturbance at a prehistoric site of extraordinary significance to Florida’s prehistory, “Dead Cow.” Fifteen of the 36 NRHP-eligible sites (42 %) had some level of swine disturbance, including 14 of 30 (47 %) sites known to have artifacts within 20 cm of the surface (well within swine rooting depths). At the Dead Cow site, we documented disturbance at 74 % of shovel test points. Sites with shallow artifact depositions appeared highly vulnerable to disturbance by feral swine, threatening destruction of artifact stratigraphy and provenience. Our observations likely are a minimal representation of accumulated damage. These irreplaceable sites tell the area’s land use story across the millennia. That they are under threat from feral swine should serve broad notice of potential threats that feral swine may pose to archaeological sites globally, making effective swine management imperative for site protection.     

A scuba diving direct sediment sampling methodology on benthic transects in glacial lakes: procedure description,safety measures,and tests results

This work presents an in situ sediment sampling method on benthic transects, specifically intended for scientific scuba diver teams. It was originally designed and developed to sample benthic surface and subsurface sediments and subaqueous soils in glacial lakes up to a maximum depth of 25 m. Tests were conducted on the Sabocos and Baños tarns (i.e., cirque glacial lakes) in the Spanish Pyrenees. Two 100 m transects, ranging from 24.5 to 0 m of depth in Sabocos and 14 m to 0 m deep in Baños, were conducted. In each test, 10 sediment samples of 1 kg each were successfully collected and transported to the surface. This sampling method proved operative even in low visibility conditions (<2 m). Additional ice diving sampling tests were conducted in Sabocos and Truchas tarns. This sampling methodology can be easily adapted to accomplish underwater sampling campaigns in nonglacial lakes and other continental water or marine environments.     

Constructed wetlands for mitigation of atrazine-associated agricultural runoff

Atrazine was amended into constructed wetlands (59-73x14x0.3 m) for the purpose of monitoring transport and fate of the pesticide to obtain information necessary to provide future design parameters for constructed wetlands mitigation of agricultural runoff. Following pesticide amendment, a simulated storm and runoff event equal to three volume additions was imposed on each wetland. Targeted atrazine concentrations were 0 microg/l (unamended control), 73 microg/l, and 147 microg/l. Water, sediment, and plant samples were collected weekly for 35 days from transects longitudinally distributed throughout each wetland and were analyzed for atrazine using gas chromatography. Between 17 and 42% of measured atrazine mass was within the first 30-36 m of wetlands. Atrazine was below detection limits (0.05 microg/kg) in all sediment and plant samples collected throughout the duration of this study. Aqueous half lives ranged from 16 to 48 days. According to these data, conservative buffer travel distances of 100-280 m would be necessary for effective runoff mitigation.     

Field application of electrokinetic remediation for multi-metal contaminated paddy soil using two-dimensional electrode configuration

In this study, we evaluated the feasibility of in situ electrokinetic remediation for arsenic (As)-, copper (Cu)-, and lead (Pb)-contaminated soil, in a pilot-scale field application with two-dimensional electrode configurations. Square and hexagonal configurations with different electrode spacing, 1 m and 2?m, were investigated under a constant 100 V. A square configuration with electrode spacing of 2 m removed 61.5 % of As, 11.4 % of Cu, and 0.9 % of Pb, respectively, and a hexagonal configuration with the same spacing showed a higher removal efficiency in top (59 % of As, 0–0.5 m) and middle (53 % of As, 0.5–1.0 m) layers, but much lower removal efficiency in the bottom layer (1–1.5 m), which was thought to be due to groundwater flow through periodic rise and fall of tides. Fractionation analysis showed that As bound to Fe–Mn oxyhydroxide was the main form of As removed by the electrokinetic process. The two-dimensional configuration wasted less electrical energy by Joule heating, and required fewer electrode installations, compared to the one-dimensional electrode configuration.     

Adsorption characteristics of Cu(II) from aqueous solution onto biochar derived from swine manure

The purpose of this study was to investigate adsorption characteristic of swine manure biochars pyrolyzed at 400 °C and 700 °C for the removal of Cu(II) ions from aqueous solutions. The biochars were characterized using BET surface area, Fourier transform infrared spectroscopy (FTIR), zeta potential, scanning electron microscopy/energy dispersive spectrometer (SEM–EDS), and X-ray diffraction (XRD). The adsorption of Cu(II) ions by batch method was carried out and the optimum conditions were investigated. The adsorption processes of these biochars are well described by a pseudo-second-order kinetic model, and the adsorption isotherm closely fitted the Sips model. Thermodynamic analysis suggested that the adsorption was endothermic. The maximum Cu(II) adsorption capacities of biochars derived from fresh and composted swine manure at 400 °C were 17.71 and 21.94 mg g^?1, respectively, which were higher than those at 700 °C. XRD patterns indicated that the silicate and phosphate particles within the biochars served as adsorption sites for Cu(II). The removal of Cu(II) ions from industrial effluent indicated that the fresh swine manure biochar pyrolyzed at 400 °C can be considered as an effective adsorbent.     

Discriminating between Copper and Silver Mill Tailings in Silver Bow Creek Overbank Deposits,Butte, Montana,U.S.A.

Mining of the Butte deposit evolved over 100 years from placer mining starting in 1864 through silver mining to copper mining in the 1900s. Tailings resulting from milling during the period 1876-1924 were typically sluiced into the adjacent Silver Bow Creek (SBC) where they were washed downstream. The most significant flood event in 1908, among others, resulted in emplacement of approximately 2.9 m tons of sediment intermixed with tailings as overbank deposits along SBC between Butte and the Warm Springs Ponds. Apportioning the associated costs was contingent in part on discriminating between ownership of liability for the silver and copper tailings, which together formed the most significant portion of the overbank deposits. Samples were collected of tailings end-members and SBC deposits and their characteristic mineralogy (e.g. galena for silver tailings, and enargite for copper tailings) used to ascertain mixing of the tailings along SBC. This analysis identified Pb as a signature element for silver tailings and Cu for copper tailings. Two-hundred and twenty-four Cu and Pb chemical analyses representing 43 transects through the overbank deposits along SBC allowed calculation of the proportional contribution of the end members for each integrated transect. Accumulating the volumes from each transect resulted in an apportionment of 53% copper and 47% silver tailings in the overbank deposits.     

Discriminating between Copper and Silver Mill Tailings in Silver Bow Creek Overbank Deposits,Butte, Montana,U.S.A.

Mining of the Butte deposit evolved over 100 years from placer mining starting in 1864 through silver mining to copper mining in the 1900s. Tailings resulting from milling during the period 1876–1924 were typically sluiced into the adjacent Silver Bow Creek (SBC) where they were washed downstream. The most significant flood event in 1908, among others, resulted in emplacement of approximately 2.9 m tons of sediment intermixed with tailings as overbank deposits along SBC between Butte and the Warm Springs Ponds. Apportioning the associated costs was contingent in part on discriminating between ownership of liability for the silver and copper tailings, which together formed the most significant portion of the overbank deposits. Samples were collected of tailings end-members and SBC deposits and their characteristic mineralogy (e.g. galena for silver tailings, and enargite for copper tailings) used to ascertain mixing of the tailings along SBC. This analysis identified Pb as a signature element for silver tailings and Cu for copper tailings. Two-hundred and twenty-four Cu and Pb chemical analyses representing 43 transects through the overbank deposits along SBC allowed calculation of the proportional contribution of the end members for each integrated transect. Accumulating the volumes from each transect resulted in an apportionment of 53% copper and 47% silver tailings in the overbank deposits.     

Influence of vegetation in mitigation of methyl parathion runoff

A pesticide runoff event was simulated on two 10 m x 50 m constructed wetlands (one non-vegetated, one vegetated) to evaluate the fate of methyl parathion (MeP) (Penncap-M). Water, sediment, and plant samples were collected at five sites downstream of the inflow for 120 d. Semi-permeable membrane devices (SPMDs) were deployed at each wetland outflow to determine exiting pesticide load. MeP was detected in water at all locations of the non-vegetated wetland (50 m), 30 min post-exposure. MeP was detected 20 m from the vegetated wetland inflow 30 min post-exposure, while after 10d it was detected only at 10 m. MeP was measured only in SPMDs deployed in non-vegetated wetland cells, suggesting detectable levels were not present near the vegetated wetland outflow. Furthermore, mass balance calculations indicated vegetated wetlands were more effective in reducing aqueous loadings of MeP introduced into the wetland systems. This demonstrates the importance of vegetation as sorption sites for pesticides in constructed wetlands.     

Prospect of recovering phosphorus in magnesium slag-packed wetland filter

Phosphorus recovery from wastewater not only reduces the unbearable impacts of excessive nutrient discharge on environmental systems but also favor the reuse of phosphorus resource. Based on the mechanism as well as technical analysis for major phosphorus recovery techniques including struvite precipitation and wetland substrate adsorption, a novel magnesium slag-packed wetland filter and corresponding operational procedures are proposed, which aim to reduce the dependence of using magnesium-containing chemical reagent as magnesium sources for struvite precipitation, and improve the accumulation and recovery performance for struvite precipitation within porous wetland substrate. Results from preliminary experiments indicated that magnesium slag particles with approximately 2 mm in diameter can recover 43.20–72.39% phosphorus from 1–25 mol/L PO₄ ^3? solution, and the presence of 5–50 mol/L NH₄ ⁺ contributed to 11.71–29.11% enhancement of phosphorus recovery mainly due to struvite precipitation. The detected generation of struvite via XRD spectrum analysis partly demonstrated the potential of phosphorus recovery in magnesium slag-packed wetland filter. The proposed phosphorus recovery technology is free of secondary pollution and solid waste generation; phosphorus-saturated (mainly due to struvite precipitation and adsorption) magnesium slag particles can be potentially used as phosphorus fertilizer and thus partly solved the traditional shortages of disposing phosphorus-saturated substrate due to low phosphorus contents.     

Tsunami run-up and inundation along the coast of Sabah and Sarawak,Malaysia due to a potential Brunei submarine mass failure

Submarine landslides, also known as submarine mass failures (SMFs), are major natural marine disasters that could critically damage coastal facilities such as nuclear power plants and oil and gas platforms. It is therefore essential to investigate submarine landslides for potential tsunami hazard assessment. Three-dimensional seismic data from offshore Brunei have revealed a giant seabed mass deposited by a previous SMF. The submarine mass extends over 120 km from the continental slope of the Baram Canyon at 200 m water depth to the deep basin floor of the Northwest Borneo Trough. A suite of in-house two-dimensional depth-averaged tsunami simulation model TUNA (Tsunami-tracking Utilities and Application) is developed to assess the vulnerability of coastal communities in Sabah and Sarawak subject to potential SMF tsunami. The submarine slide is modeled as a rigid body moving along a planar slope with the center of mass motion parallel to the planar slope and subject to external forces due to added mass, gravity, and dissipation. The nonlinear shallow water equations are utilized to simulate tsunami propagation from deepwater up to the shallow offshore areas. A wetting-drying algorithm is used when a tsunami wave reaches the shoreline to compute run up of tsunami along the shoreline. Run-up wave height and inundation maps are provided for seven densely populated locations in Sabah and Sarawak to highlight potential risks at each location, subject to two scenarios of slide slopes: 2° and 4°. The first wave may arrive at Kudat as early as 0.4 h after the SMF, giving local communities little time to evacuate. Over a small area, maximum inundated depths reaching 20.3 m at Kudat, 26.1 m at Kota Kinabalu, and 15.5 m at Miri are projected, while the maximum inundation distance of 4.86 km is expected at Miri due to its low-lying coast. In view of the vulnerability of some locations to the SMF tsunami, it is important to develop and implement community resilience program to reduce the potential damage that could be inflicted by SMF tsunamis.     

Particle size distribution of n-alkanes and polycyclic aromatic hydrocarbons (PAHS) in urban and industrial aerosol of Algiers,Algeria

The distribution of ambient air n-alkanes and polycyclic aromatic hydrocarbons (PAHs) associated to particles with aerodynamic diameters lesser than 10 μm (PM₁₀) into six fractions (five stages and a backup filter) was studied for the first time in Algeria. Investigation took place during September of 2007 at an urban and industrial site of Algiers. Size-resolved samples (<0.49, 0.49–0.95, 0.95–1.5, 1.5–3.0, 3.0–7.2, and7.2–10 μm) were concurrently collected at the two sampling sites using five-stage high-volume cascade impactors. Most of n-alkanes (~72 %) and PAHs (~90 %) were associated with fine particles ≤1.5 μm in both urban and industrial atmosphere. In both cases, the n-alkane contents exhibited bimodal or weakly bimodal distribution peaking at the 0.95–1.5-μm size range within the fine mode and at 7.3–10 μm in the coarse mode. Low molecular weight PAHs displayed bimodal patterns peaking at 0.49–0.95 and 7.3–10 μm, while high molecular weight PAHs exhibited mono-modal distribution with maximum in the <0.49-μm fraction. While the mass mean diameter of total n-alkanes in the urban and industrial sites was 0.70 and 0.84 μm, respectively, it did not exceed 0.49 μm for PAHs. Carbon preference index (~1.1), wax% (10.1–12.8), and the diagnostic ratios for PAHs all revealed that vehicular emission was the major source of these organic compounds in PM₁₀ during the study periods and that the contribution of epicuticular waxes emitted by terrestrial plants was minor. According to benzo[a]pyrene-equivalent carcinogenic power rates, ca. 90 % of overall PAH toxicity across PM₁₀ was found in particles ≤0.95 μm in diameter which could induce adverse health effects to the population living in these areas.     

Effects of site-specific climatic conditions on the radial growth of the lichen biomonitor <Emphasis Type="Italic">Xanthoria parietina</Emphasis>

The protocols commonly applied in surveys with lichens as biomonitors of airborne trace elements require analyses of samples derived from thalli or parts of thalli grown in the last year before sampling, under the postulation that samples of the same size are of the same age. Unfortunately, the influence of ecological site-specific factors on lichen growth is still largely ignored, so that samples of the same size collected in environmentally and climatically diverse sites might actually differ in age. This work aims at quantifying the influence of climatic conditions on the radial growth rates (RaGRs) of Xanthoria parietina, one of the most popular lichen biomonitors. RaGR was monitored in seven populations distributed along an altitudinal transect of 30 km in the Classical Karst (NE Italy), from 20 to 500 m above sea level. For c. 17 months, lobe growth was measured seasonally with a digital calliper, and site-specific climatic variables were monitored by means of thermo-hygrometric sensors and implemented by meteorological data. Finally, the lobe growth of X. parietina was modelled as a function of 18 environmental variables. Results revealed that thalli of relatively dry sites had significantly lower seasonal RaGR with respect to moister ones. Considering that cumulative precipitations were equally distributed along the transect, it was concluded that RaGR of X. parietina is affected negatively by high air temperatures and positively by high relative humidity. The importance of RaGR variation in lichen bioaccumulation studies is critically discussed.     

The acute effects of fine particles on respiratory mortality and morbidity in Beijing, 2004–2009

Recent epidemiological and toxicological studies have shown associations between particulate matter and human health. However, the estimates of adverse health effects are inconsistent across many countries and areas. The stratification and interaction models were employed within the context of the generalized additive Poisson regression equation to examine the acute effects of fine particles on respiratory health and to explore the possible joint modification of temperature, humidity, and season in Beijing, China, for the period 2004–2009. The results revealed that the respiratory health damage threshold of the PM_2.5 concentration was mainly within the range of 20–60 μg/m³, and the adverse effect of excessively high PM_2.5 concentration maintained a stable level. In the most serious case, an increase of 10 μg/m³ PM_2.5 results in an elevation of 4.60 % (95 % CI 3.84–4.60 %) and 4.48 % (95 % CI 3.53–5.41 %) with a lag of 3 days, values far higher than the average level of 0.69 % (95 % CI 0.54–0.85 %) and 1.32 % (95 % CI 1.02–1.61 %) for respiratory mortality and morbidity, respectively. There were strong seasonal patterns of adverse effects with the seasonal variation of temperature and humidity. The growth rates of respiratory mortality and morbidity were highest in winter. And, they increased 1.4 and 1.8 times in winter, greater than in the full year as PM_2.5 increased 10 μg/m³.     

Kinetics study of fermentative hydrogen production from liquid swine manure supplemented with glucose under controlled pH

Kinetics of H₂ production from liquid swine manure supplemented with glucose by mixed anaerobic cultures was investigated using batch experiments under four different pH conditions (4.4, 5.0, 5.6, and uncontrolled). The temperature for the experiments was controlled at 37 ± 1°C and the length of experiments varied between 50 and 120 hours, depending upon the time needed for completion of each individual experiment. The modified Gompertz model was evaluated for its suitability for describing the H₂ production potential, H₂ production rate, and substrate consumption rate for all the experiments. The results showed that the Gompertz model could adequately fit the experimental results. The effect of pH was significant on all kinetic parameters for H₂ production including yield, production rate and lag time, and the substrate utilization rate. The optimal pH was found to be 5.0, at which a maximum H₂ production rate (0.64 L H₂/h) was obtained, and deviation from the optimal pH could result in substantial reductions in H₂ production rate (0.32 L H₂/h for pH 4.0 and 0.43 L H₂/h for pH 5.6). The results also showed that if pH was not controlled for the batch fermentation process, the substrate utilization efficiency could steeply decrease from 98.8% to 33.7%.     

Biological effects of ammonia released from a composting plant assessed with lichens

In this study, we investigated whether ammonia emissions from industrial composting of organic waste may influence the surrounding environment, using lichens as bioindicators. To this purpose, samples of N-tolerant and N-sensitive lichens, namely Xanthoria parietina and Evernia prunastri, were transplanted for 1–3 months along transects at increasing distance (0–400 m) from a composting facility in Tuscany, Italy. Atmospheric concentrations of ammonia were measured using passive samplers. The physiological response of lichen transplants was investigated by means of the photosynthetic efficiency (measured as chlorophyll a fluorescence emission), the integrity of cell membranes (measured as electrolyte leakage), and sample viability (measured as enzymatic activity of dehydrogenase). Epiphytic lichen communities were investigated using biodiversity indices. The results showed decreasing concentrations of ammonia, from 48.7 μg/m³ at the composting facility to 2.7 μg/m³ at 400 m. The N-tolerant X. parietina was not affected and some physiological parameters even showed a higher performance, while the N-sensitive E. prunastri showed a reduced performance with increasing atmospheric concentrations approaching the source. A shift from lichen communities composed by meso-acidophilous species (actual condition) to more nitrophilous communities in the near future, approaching the composting facility is suggested. It is concluded that lichens can provide useful data for decision-makers to establish correct science-based environmentally sustainable waste management policies.     

Coastal water quality in the Kihei and Lahaina districts of the island of Maui, Hawaiian Islands. Impacts from physical habitat and groundwater seepage: implications for water quality standards

Water quality in terms of nutrient concentrations, turbidity, suspended solids, and chlorophyll a, was studied during 2000–2001 at a total of 27 beaches in the Kihei and West Maui–Lahaina districts of Maui, Hawaiian Islands. Nitrate concentrations varied widely and averaged as much as 15–20 μM at some beaches. Most turbidities fell in the range 1–10 nephelometric turbidity units. Resuspension of bottom sediments on shallow reef flats appeared to be a cause of some of the highest turbidity. Onshore-offshore transect studies showed that turbidity and concentrations of nitrate and chlorophyll a declined dramatically with distance from the shoreline. The dramatic gradients in water quality within the first 100 m from the shoreline and the fact that some violations of water quality criteria within that zone appear to be the result of natural phenomena, underscore the difficulty of assessing the quality of coastal waters based on traditional parameters.     

Personal exposure to fine particulate matter concentrations in central business district of a tropical coastal city

In the present study, personal exposure to fine particulate matter (particulate matter with an aerodynamic diameter <2.5 μm [PM_2.5]) concentrations in an urban hotspot (central business district [CBD]) was investigated. The PM monitoring campaigns were carried out at an urban hotspot from June to October 2015. The personal exposure monitoring was performed during three different time periods, i.e., morning (8 a.m.?9 a.m.), afternoon (12.30 p.m.–1.30 p.m.), and evening (4 p.m.–5 p.m.), to cover both the peak and lean hour activities of the CBD. The median PM_2.5 concentrations were 38.1, 34.9, and 40.4 µg/m³ during the morning, afternoon, and evening hours on the weekends. During weekdays, the median PM_2.5 concentrations were 59.5, 29.6, and 36.6 µg/m³ in the morning, afternoon, and evening hours, respectively. It was observed that the combined effect of traffic emissions, complex land use, and micrometeorological conditions created localized air pollution hotspots. Furthermore, the total PM_2.5 lung dose levels for an exposure duration of 1 hr were 8.7 ± 5.7 and 12.3 ± 5.2 µg at CBD during weekends and weekdays, respectively, as compared with 2.5 ± 0.8 µg at the urban background (UB). This study emphasizes the need for mobile measurement for short-term personal exposure assessment complementing the fixed air quality monitoring.

Implications: Personal exposure monitoring at an urban hotspot indicated space and time variation in PM concentrations that is not captured by the fixed air quality monitoring networks. The short-term exposure to higher concentrations can have a significant impact on health that need to be considered for the health risk–based air quality management. The study emphasizes the need of hotspot-based monitoring complementing the already existing fixed air quality monitoring in urban areas. The personal exposure patterns at hotspots can provide additional insight into sustainable urban planning.     

Nitrogen transformations and balance in constructed wetlands for slightly polluted river water treatment using different macrophytes

Nitrogen removal processing in different constructed wetlands treating different kinds of wastewater often varies, and the contribution to nitrogen removal by various pathways remains unclear. In this study, the seasonal nitrogen removal and transformations as well as nitrogen balance in wetland microcosms treating slightly polluted river water was investigated. The results showed that the average total nitrogen removal rates varied in different seasons. According to the mass balance approach, plant uptake removed 8.4–34.3 % of the total nitrogen input, while sediment storage and N₂O emission contributed 20.5–34.4 % and 0.6–1.9 % of nitrogen removal, respectively. However, the percentage of other nitrogen loss such as N₂ emission due to nitrification and denitrification was estimated to be 2.0–23.5 %. The results indicated that plant uptake and sediment storage were the key factors limiting nitrogen removal besides microbial processes in surface constructed wetland for treating slightly polluted river water.     

Study of spatial and temporal distribution of antimicrobial in water and sediments from caging fish farms by on-line SPE-LC-MS/MS

An on-line solid phase extraction liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) method for the determination of 12 antimicrobials in sediment and surface water was developed and validated. Furthermore, the spatial and temporal antimicrobials distributions in the sediment and in the water of four fish farms located in the hydroelectric dam of Ilha Solteira Reservoir in Brazil were investigated over four seasons in three sampling sites: at the fish cages, 100 and 1,000 m downstream far from the cages. The method was performed using an Agilent Zorbax 80 SB-C8 column (9.4 × 15 mm, 5 µm) as the loading column, and the Agilent Zorbax Eclipse Plus C18 column (3.0 × 100 mm, 3.5 µm) as a separation column within a run time of 13 min. The limits of quantification were less than 9 ng·L^?1 for the antibiotics in water and 16 µg·kg^?1 in sediment; the recovery ranged from 80 to 119%, with a variation coefficient less than 11%, and the repeatability was lower than 15%. Oxytetracycline was found in the water in all sample seasons. However, florfenicol was identified in April and October 2013 and January 2014, and tetracycline was present in July 2013. Regarding the sediment, oxytetracycline and tetracycline were found in all sampling periods, but chlortetracycline was only identified in January 2014. The spatial distribution of antimicrobials showed that the main pollution source came from the fish farms. This study demonstrated that the proposed method is reliable for the monitoring of antimicrobials in water and sediments and it showed contamination in both matrices from Ilha Solteira Reservoir.