Evaluation of acidity in late Permian outcrop coals and its association with endemic fluorosis in the border area of Yunnan,Guizhou, and Sichuan in China

The junction area of Yunnan, Guizhou, and Sichuan provinces is the heaviest coal-burning endemic fluorosis zones in China. To better understand the pathogenicity of endemic fluorosis in this area, 87 coal samples from the late Permian outcrop or semi-outcrop coal seams were collected in eight counties of the junction area of Yunnan, Guizhou, and Sichuan provinces. The total fluorine and sulfate content, etc. in the coal was determined using combustion-hydrolysis/fluoride-ion-selective electrode method and ion chromatography, respectively. The results show that the total fluorine concentrations in the samples ranged from 44 to 382 µg g^?1, with an average of 127 µg g^?1. The average pH of the coals is 5.03 (1.86–8.62), and the sulfate content varied from 249 to 64,706 µg g^?1 (average 7127 µg g^?1). In addition, the coals were medium- and high-sulfur coals, with sulfur mass fraction ranging from 0.08 to 13.41%. By heating the outcrop coals, HF release from the coal was verified quantitatively without exception, while simulated combustion directly confirmed the release of sulfuric acid (H₂SO₄). The acid in coal may be in the form of acidic sulfate (\({\text{HSO}}_{4}^{ - }\)/H₂SO₄) because of a positive relationship between pH and \(p\left( {{\text{SO}}_{4}^{2 - } } \right)\) in the acidic coal. The possible reaction mechanism would be that a chemical reaction between the acid (H₂SO₄ or \({\text{HSO}}_{4}^{ - }\)) and fluorine in the coal occurred, thereby producing hydrogen fluoride (HF), which would be the chemical form of fluorine released from coal under relatively mild conditions. The unique chemical and physical property of HF may bring new insight into the pathogenic mechanism of coal-burning endemic fluorosis. The phenomenon of coal-burning fluorosis is not limited to the study area, but is common in southwest China and elsewhere. Further investigation is needed to determine whether other endemic fluorosis areas are affected by this phenomenon.     

Adsorption of rhodium(III) from plating solutions by calcined gibbsite

Gibbsite calcined at 400°C (GB400) was prepared, and its ability to adsorb rhodium(III) was investigated. Optimal pH, effect of contact time, temperature, adsorption isotherms, and recovery percentage were evaluated. The optimal pH was 6.3. The adsorption equilibrium was achieved within 24 h. The adsorption rate was found to be of pseudo-first order. The experimental data were fitted to both the Freundlich (r = 0.90–0.93) and Langmuir (r = 0.94–0.96) equations. The amount of rhodium(III) adsorbed decreased with increasing temperature. Rhodium(III) being adsorbed from phosphate or sulfate plating solution was recovered using hydrochloric acid and sodium hydroxide solutions at 1, 10, and 100 mmol L^?1.     

Graphene quantum dots–eggshell nanocomposite to extract polycyclic aromatic hydrocarbons in water

In solid-phase extraction, the sorbent controls selectivity, affinity, and loading capacity. Many sorbents can be used, such as functionalized resin, naphthalene, activated carbon, molecular-imprinted polymers, and nanometer-sized materials. Here, we prepared a nanocomposite made of graphene quantum dots and eggshell to extract polycyclic aromatic hydrocarbons from aqueous solutions. We studied the effect of sample volume, solution pH, amount of nanosorbent, and sample loading flow rate on the extraction efficiency. We obtained a wide dynamic linear range from 0.1 to 200 ng m/L, good linearity with r ² higher than 0.99, and low-detection limits of 5–75 pg m/L. We measured PAH in spiked water samples.     

Polycyclic aromatic hydrocarbons (PAHs) in multimedia environment of Heshan coal district,Guangxi: distribution,source diagnosis and health risk assessment

Mining activities are among the major culprits of the wide occurrences of soil and water pollution by PAHs in coal district, which have resulted in ecological fragilities and health risk for local residents. Sixteen PAHs in multimedia environment from the Heshan coal district of Guangxi, South China, were measured, aiming to investigate the contamination level, distribution and possible sources and to estimate the potential health risks of PAHs. The average concentrations of 16 PAHs in the coal, coal gangue, soil, surface water and groundwater were 5114.56, 4551.10, 1280.12 ng g^?1, 426.98 and 381.20 ng L^?1, respectively. Additionally, higher soil and water PAH concentrations were detected in the vicinities of coal or coal gangue dump. Composition analysis, isomeric ratio, Pearson correlation analysis and principal component analysis were performed to diagnose the potential sources of PAHs in different environmental matrices, suggesting the dominant inputs of PAHs from coal/coal combustion and coal gangue in the soil and water. Soil and water guidelines and the incremental lifetime risk (ICLR) were used to assess the health risk, showing that soil and water were heavily contaminated by PAHs, and mean ICLR_{coal/coal-gangue} and mean ICLR_soil were both significantly higher than the acceptable levels (1 × 10^?4), posing high potential carcinogenic risk to residents, especially coal workers. This study highlights the environmental pollution problems and public health concerns of coal mining, particularly the potential occupational health hazards of coal miners exposed in Heshan.     

The removal of arsenic from water with natural and modified clinoptilolite

The presence of increased arsenic concentrations in Eastern Croatia is a consequence of the geological composition of the soil. Because of its known harmful effects, arsenic removal is of high importance and adsorption represents an attractive and economically efficient approach to arsenic removal. The use of zeolites obtained from the Donje Jesenje deposit, Croatia (CZ) and the Zlatokop deposit in Vranjska Banja, Serbia (SZ) in Na- and Fe–Na-modified forms was investigated in order to effectively remove arsenate and arsenite from aqueous solutions. The adsorption kinetics of arsenic was studied as a function of the initial arsenate and arsenite concentrations (30–300 μg · L^?1), equilibration time (3–48 h), pH (5–10) and in the presence of sulfate and phosphate at initial concentrations of 0.2–0.5 mg · L^?1. In order to estimate sorption constants designating the sorption capacity and affinity of the zeolites samples, the experimental results were fitted to the Langmuir and Freundlich sorption isotherms. Desorption tests conducted with 1–3 mol · L^?1 HCl indicated that arsenate sorption was irreversible. The results obtained indicated that use of the Serbian zeolite in the Fe–Na-modified form (Fe–Na-SZ) was favourable for arsenate removal from water containing up to 30 μg As · L^?1.     

Pomegranate husk as an adsorbent in the removal of toxic chromium from wastewater

The use of a new sorbent developed from the husk of pomegranate, a famous fruit in Egypt, for the removal of toxic chromium from aqueous solution has been investigated. The batch experiment was conducted to determine the adsorption capacity of the pomegranate husk. The effects of initial metal concentration (25 and 50 mg l^?1), pH, contact time, and sorbent concentration (2–6 g l^?1) have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increased as the pH decreased, and the optimum pH value was pH 1.0. Adsorption equilibrium and kinetics were studied with different sorbent and metal concentrations. The adsorption process was fast, and equilibrium was reached within 3 h. The maximum removal was 100% for 25 mg l^?1 of Cr⁶⁺ concentration on 5 g l^?1 pomegranate husk concentration, and the maximum adsorption capacity was 10.59 mg g^?1. The kinetic data were analysed using various kinetic models—pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion equations—and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Tempkin, Dubinin–Radushkevich, and Generalized isotherm equations. The Elovich and pseudo-second-order equations provided the greatest accuracy for the kinetic data, while Langmuir and Generalized isotherm models were the closest fit for the equilibrium data. The activation energy of sorption has also been evaluated as 0.236 and 0.707 kJ mol^?1 for 25 and 50 mg l^?1 chromium concentration, respectively.     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

Carbon emission associated with respiration and calcification of nine gastropod species from the intertidal rocky shore of Western Europe

Intertidal rocky shores are characterized by vertical zonation that results from the interplay between environmental conditions, organism physiology, and species interactions. Metabolism of intertidal organisms is highly variable between species and it changes with vertical position along the intertidal gradient. The present study aimed to quantify the carbon metabolism of nine intertidal rocky shore gastropods, in order to clarify their respective roles in carbon production during emersion and immersion. The influences of monthly temperature variation and tidal level were tested for each species. Analyses were performed in the laboratory using the infrared gas analyzer method for measuring aerial respiration rates, and the dissolved inorganic carbon and total alkalinity technique for measuring aquatic respiration rate and calcification. Hourly carbon fluxes were calculated for the mean annual temperature of 13 °C measured in both air and underwater in the study area. Respiration rates were similar for emersion (8–25 μmol CO₂ g AFDW^?1 h^?1) and immersion (10–23 μmol DIC g AFDW^?1 h^?1). For all species, underwater respiration fluxes were more influenced by monthly temperature variation than by air fluxes, probably as an adaptation to the rapid changes occurring during emersion. Calcification was an important factor influencing annual carbon fluxes for all studied species; every species showed different calcification rates according to its size and position on the intertidal zone. Annual carbon emissions were calculated using the mean immersion/emersion time of each species. Intertidal gastropod carbon emission was primarily influenced by body biomass and their vertical position within the intertidal zone.     

Chromium recovery from solid leather waste by chemical treatment and optimisation by response surface methodology

The leather industry uses conventional tanning methods which cause environmental pollution due mainly to the presence of chromium. This study suggests a treatment for solid leather waste containing chromium as an ecological alternative to the pollution generated by tanneries. The study uses an original approach to the optimisation of chromium recovery by mathematical and statistical treatment of the experimental data. Several factors that influence recovery, such as temperature, concentration, time and solid/liquid ratio through acid and basic hydrolysis were analysed with the aid of experimental design. Tanning liquor was obtained by adjusting pH, alkalinity and concentration when hydrolysis finished. An appropriate response surface model was constructed using alkaline hydrolysis experiments with sodium hydroxide, leading to conditions for maximum recovery of Cr₂O₃. The optimal NaOH concentration (1.58%), temperature (63.7 °C), time (3 h) and solid/liquid ratio (1/70 g·mL^?1) were established. The results indicate that sodium hydroxide as an hydrolysis agent is a highly efficient means of recovering chromium from solid leather waste in order to produce tanning liquor.     

Environmental impact of CO<Subscript>2</Subscript>, Rn,Hg degassing from the rupture zones produced by Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript> 8.0 earthquake in western Sichuan,China

The concentrations and flux of CO₂, ²²²Radon (Rn), and gaseous elemental mercury (Hg) in soil gas were investigated based on the field measurements in June 2010 at ten sites along the seismic rupture zones produced by the May 12, 2008, Wenchuan M _s 8.0 earthquake in order to assess the environmental impact of degassing of CO₂, Rn and Hg. Soil gas concentrations of 344 sampling points were obtained. Seventy measurements of CO₂, Rn and Hg flux by the static accumulation chamber method were performed. The results of risk assessment of CO₂, Rn and Hg concentration in soil gas showed that (1) the concentration of CO₂ in the epicenter of Wenchuan M _s 8.0 earthquake and north end of seismic ruptures had low risk of asphyxia; (2) the concentrations of Rn in the north segment of seismic ruptures had high levels of radon, Maximum was up to level 4, according to Chinese code (GB 50325-2001); (3) the average geoaccumulation index I _geo of soil Hg denoted the lack of soil contamination, and maximum values classified the soil gas as moderately to strongly polluted in the epicenter. The investigation of soil gas CO₂, Rn and Hg degassing rate indicated that (1) the CO₂ in soil gas was characterized by a mean \(\updelta^{13}C_{CO2}\) of ?20.4 ‰ and by a mean CO₂ flux of 88.1 g m^?2 day^?1, which were in the range of the typical values for biologic CO₂ degassing. The maximum of soil CO₂ flux reached values of 399 g m^?2 day^?1 in the epicenter; (2) the soil Rn had higher exhalation in the north segment of seismic ruptures, the maximum reached value of 1976 m Bq m^?2 s^?1; (3) the soil Hg flux was lower, ranging from ?2.5 to 18.7 n g m^?2 h^?1 and increased from south to north. The mean flux over the all profiles was 4.2 n g m^?2 h^?1. The total output of CO₂ and Hg degassing estimated along seismic ruptures for a survey area of 18.17 km² were approximately 0.57 Mt year^?1 and 688.19 g year^?1. It is recommended that land-use planners should incorporate soil gas and/or gas flux measurements in the environmental assessment of areas of possible risk. A survey of all houses along seismic ruptures is advised as structural measures to prevent the ingress of soil gases, including CO₂ and Rn, were needed in some houses.     

Real-time monitoring of nanoparticle retention in porous media

Nanoparticles are not specifically targeted in conventional treatment schemes; consequently, typical wastewater treatment systems are ineffective for nanoparticles removal. With rapidly increasing concern over their health effects, improved understanding of nanoparticle transport and retention in porous media filters is critical because of its application in new wastewater treatment methods and for assessment of the fate of the discharged nanoparticles in soil. In this study, a unique and robust integrated method is developed and validated. Experimentally, this approach uses an on-line, real-time, and in situ method for measuring nanoparticle retention dynamics, eliminating the laborious and less accurate sampling and off-line analysis. The data analysis part is a process simulator which provides both kinetic properties of the retention process as well as the overall capacity and loading. This technique is validated by application to the transport and retention of TiO₂ nanoparticles in two vastly different porous filtration media—activated carbon and sand. TiO₂ retained concentrations ranged from 0.24 to 0.37 mg g^?1 for activated carbon and 0.01–0.014 mg g^?1 for sand. The integrated method presented here is useful for both comparison of the filtration effectiveness of various porous materials as well as for process optimization and scale-up for industrial applications.     

Assessment of heavy metals in a soil contaminated by oil spill: a case study in Nigeria

Surface and subsurface soil samples contaminated with crude oils were collected from an impacted site at Bodo City in the Niger Delta, Nigeria, after a field reconnaissance survey. An uncontaminated soil sample collected 100 m from the impacted site, but within the same geographical area, was used as a control. Trace elements such as, As, Cu, Cr, Cd, Fe, Pb, Ba, Ni, V, Hg and cation-exchange capacity constituents of the contaminated and uncontaminated soils were determined by atomic absorption spectroscopy. Trace element concentrations were: Cu, 0.5–13.4 mg kg^{? 1}; Cr, 0.2–0.8 mg kg^{? 1}; Fe, 6.2–8.7 mg kg^{? 1}; Ba 80.0–108.0 mg kg^{? 1}; Ni, 0.6–4.8 mg kg^{? 1}; and V, 4.0–9.4 mg kg^{? 1}; cation-exchange capacity ranged from 43.6 to 57.2 mg kg^{? 1} in surface and subsurface soils. Results showed that eigenvalues for the two first principal components represent up to 49% of the total variance. A positive correlation of the first principal component with Cu, Cr and cation-exchange capacity shows pollution from oil spillage, while a positive correlation of the second principal component with Cr, Fe, V, and dissolved oxygen (DO) shows both oil pollution and allochthonous inputs.     

Insulative capacity of the integument of the dugong (Dugong dugon): thermal conductivity,conductance and resistance measured by in vitro heat flux

Extant sirenians are restricted to warm waters, presumably due to their low metabolism and poor thermoregulatory capacity, including thin blubber. When subjected to winter waters, Florida manatees (Trichechus manatus latirostris) migrate to warm areas, but dugongs (Dugong dugon) do not and instead live year-round in winter waters as cool as 15–18 °C. Dugongs appear to be more active than manatees and may have higher metabolic rates, but little is known about thermal energetics or the insulative properties of their integument. This study investigated the physical and thermal properties of whole samples of dugong integument, i.e. epidermis, dermis and hypodermis (blubber) sampled from fresh dugong carcasses collected from 2004 to 2012 in Moreton Bay (27.21°S, 153.25°E). Physico-chemical properties (thickness, density and lipid content) of each component tissue layer were measured. Thermal conductance (C) and conductivity (k) were measured for each tissue layer through in vitro temperature flux experiments within an insulated chamber. C and k were higher for dermis (25.7 ± 1.2 W m^?2 K^?1, 0.43 ± 0.02 W m^?1 K^?1, respectively, n = 21) than blubber (24.3 ± 2.4 W m^?2 K^?1, 0.31 ± 0.01 W m^?1 K^?1, n = 21), suggesting that blubber, with higher density and lipid content, affords better insulation. However, because the dermis contributes 65 % of integumentary thickness, both layers contribute significantly to insulation. The integument of dugongs is a poorer insulator compared to many cold-water marine mammals, but the greater thickness of its dermal layer means that despite its relatively thin blubber, its integumentary insulation is similar to warm-water dolphins of similar body size.     

The synergistic effects of increasing temperature and CO2 levels on activity capacity and acid–base balance in the spider crab, Hyas araneus

With global climate change, ocean warming and acidification occur concomitantly. In this study, we tested the hypothesis that increasing CO₂ levels affect the acid–base balance and reduce the activity capacity of the Arctic spider crab Hyas araneus, especially at the limits of thermal tolerance. Crabs were acclimated to projected oceanic CO₂ levels for 12 days (today: 380, towards the year 2100: 750 and 1,120 and beyond: 3,000 μatm) and at two temperatures (1 and 4 °C). Effects of these treatments on the righting response (RR) were determined (1) at acclimation temperatures followed by (2) righting when exposed to an additional acute (15 min) heat stress at 12 °C. Prior to (resting) and after the consecutive stresses of combined righting activity and heat exposure, acid–base status and lactate contents were measured in the haemolymph. Under resting conditions, CO₂ caused a decrease in haemolymph pH and an increase in oxygen partial pressure. Despite some buffering via an accumulation of bicarbonate, the extracellular acidosis remained uncompensated at 1 °C, a trend exacerbated when animals were acclimated to 4 °C. The additional combined exposure to activity and heat had only a slight effect on blood gas and acid–base status. Righting activity in all crabs incubated at 1 and 4 °C was unaffected by elevated CO₂ levels or acute heat stress but was significantly reduced when both stressors acted synergistically. This impact was much stronger in the group acclimated at 1 °C where some individuals acclimated to high CO₂ levels stopped responding. Lactate only accumulated in the haemolymph after combined righting and heat stress. In the group acclimated to 1 °C, lactate content was highest under normocapnia and lowest at the highest CO₂ level in line with the finding that RR was largely reduced. In crabs acclimated to 4 °C, the RR was less affected by CO₂ such that activity caused lactate to increase with rising CO₂ levels. In line with the concept of oxygen and capacity limited thermal tolerance, all animals exposed to temperature extremes displayed a reduction in scope for performance, a trend exacerbated by increasing CO₂ levels. Additionally, the differences seen between cold- and warm-acclimated H. araneus after heat stress indicate that a small shift to higher acclimation temperatures also alleviates the response to temperature extremes, indicating a shift in the thermal tolerance window which reduces susceptibility to additional CO₂ exposure.     

Influence of a botanical pesticide,azadirachtin, on ultimobranchial gland of the freshwater catfish Heteropneustes fossilis

Freshwater catfish, Heteropneustes fossilis, were subjected to 42 mg L^?1 of azadirachtin for short-term exposure (96 h) and to 10.5 mg L^?1 for long-term exposure (28 days). Six fishes were sacrificed on each time interval from control and experimental groups after 24, 48, 72, and 96 h in the short-term exposure and after 7, 14, 21, and 28 days in the long-term experiment. The calcium regulating endocrine gland, viz. the ultimobranchial gland, was fixed for histological studies. Up to 72 h of azadirachtin treatment, there was no histological alteration in the UBG (ultimobranchial gland) of H. fossilis. After 96 h exposure, the ultimobranchial cells stain feebly and the nuclear volume of these cells were slightly decreased. No histological alterations have been observed in the UBG cells up to 14 days following azadirachtin exposure. After 21 days, the cytoplasm of ultimobranchial cells was feebly stained and the nuclear volume exhibits a decrease. The nuclear volume of these cells was further decreased and the gland shows vacuolization and degeneration at certain places after 28 days azadirachtin treatment. Hence, it can be concluded that azadirachtin severely affects the physiology of calcium homeostasis in H. fossilis. Therefore, the botanical pesticides should be used carefully near aquatic reservoirs.     

Marble wastes and pig slurry improve the environmental and plant-relevant properties of mine tailings

Poor soil fertility is often the biggest challenge to the establishment of vegetation in mine wastes deposits. We conducted field trials in the El Gorguel and El Lirio sites in SE Spain, two representative tailing ponds of similar properties except for pH, to understand the environmental and plant-relevant benefits of marble waste (MW) and pig slurry (PS) applications to mine tailings. Low pH (5.4) tailings (El Lirio) exhibit reduction of up to fourfold in bio-availability of metals as shown by the DTPA-Zn, Pb, water-soluble Zn, Pb and up to 3× for water-soluble Cd. Tailings in El Gorguel have high pH (7.4) and did not exhibit significant trends in the reductions of water-extractable Zn, Pb, Cd and Cu. Improvements to the edaphic (plant-relevant) properties of tailings after the amendments are not as sensitive to pH compared to the environmental characteristics. The two sites had increases in aggregate stability, organic matter (total N and organic C) although total N is higher in the El Gorguel (up to 212 μg N kg^?1) than the El Lirio (up to 26 μg N kg^?1). However, cation exchange capacities are similar in both sites at 15.2 cmol(+) kg^?1. We conclude that the characteristics, especially pH, of tailing materials significantly influence the fate of metals but not improvements to plant-relevant properties such as cation exchange capacity and aggregate stability 1 year after the application of MW and PS amendments.     

Efficient oxidation of bisphenol A with oxysulfur radicals generated by iron-catalyzed autoxidation of sulfite at circumneutral pH under UV irradiation

There is actually a need for efficient methods to clean waters and wastewaters from pollutants such as the bisphenol A endocrine disrupter. Advanced oxidation processes currently use persulfate or peroxymonosulfate to generate sulfate radicals. There are, however, few reports on the use of sulfite to generate sulfate radicals, instead of persulfate or peroxymonosulfate, except for dyes. Here we studied the degradation of the bisphenol A using iron(III) as catalyst and sulfite as precursor of oxysulfur radicals, at initial pH of 6, under UV irradiation at 395 nm. The occurrence of radicals was checked by quenching with tert-butyl alcohol and ethanol. Bisphenol A degradation products were analyzed by liquid chromatography coupled with mass spectrometry (LC–MS). Results reveal that iron(III) or iron(II) have a similar oxidation efficiency. Quenching experiments show that the oxidation rate of bisphenol A is 47.7 % for SO ₄ ^·? , 37.3 % for SO ₅ ^·? and 15 % for HO^·. Bisphenol A degradation products include catechol and quinone derivatives. Overall, our findings show that the photo-iron(III)–sulfite system is efficient for the oxidation of bisphenol A at circumneutral pH.     

Effect of light and temperature on the population dynamics of two toxic bloom forming Cyanobacteria – Microcystis ichthyoblabe and Anabaena aphanizomenoides

The effect of light and temperature on the growth of Microcystis ichthyoblabe and Anabaena aphanizomenoides, isolated from the subtropical Oued Mellah lake, Morocco (33°30′N–07°20′W), were investigated in batch culture. Growth rates at 66 light–temperature combinations were determined and fitted with different mathematical models. The results show that the two Cyanobacteria grow at all light intensities and temperatures, except at 10 °C for A. aphanizomenoides, where the growth was strongly limited. The μ_max of M. ichthyoblabe increased with temperature from 0.56 d^?1 at 10 °C to 1.32 d^?1 at 35 °C. At all tested temperatures, a relative photoinhibition within the studied range of irradiance was observed and the photosensitivity was thermodependent. For Anabaena, the obtained μ_max ranged between 0.07 d^?1 at 10 °C and 1.46 d^?1 at 35 °C, and a weak photoinhibition was observed at 15 °C. The positive correlation between μ_max and I_opt (r²≥0.93) indicates a close interaction between light and temperature on the cyanobacteria growth. The results obtained in this work suggest that the growth of these two species is possible under low light and low temperature.     

Evolution of a beach nourishment project using dredged sand from navigation channel,Dunkirk, northern France

The largest beach replenishment project ever in France was completed in February 2014 in Dunkirk on the coast of northern France. A volume of 1.5 × 10⁶ m³ of sand extracted from a navigation channel was placed on the beach to build up a 150 to 300 m wide supratidal platform in front of a dike, called « Digue des Alliés », which protects several residential districts of Dunkirk from marine flooding. High resolution topographic surveys were carried out during 2½ years to monitor beach morphological changes, completed by a hydrodynamic field experiment conducted in February 2016. Approximately ?138,200 m³ of sand, corresponding to 9.2% of the initial nourishment volume, were eroded over the nourishment area in about 2 years. An obvious decrease in erosion eastward with a shift from erosion to accumulation was observed, suggesting an eastward redistribution of sand. This longshore sand drift is beneficial for the eastward beach of Malo-les-Bains where most of the recreational activities are concentrated. Hydrodynamic measurements showed that waves and wave-induced currents play a major role on the longshore sand redistribution compared to tidal flows. Strong relationships were observed between cumulative offshore wave power and beach volume change during distinct beach survey periods (R² = 0.79 to 0.87), with more significant correlations for northerly waves. A slight decrease in erosion during the second year compared to the first year after nourishment suggests that the loss of sand should decrease after an initial phase of rapid readjustment of the beach shape towards equilibrium.     

Mesocosm and in situ observations of the burrowing shrimp Calocaris templemani (Decapoda: Thalassinidea) and its bioturbation activities in soft sediments of the Laurentian Trough

In vivo observations in laboratory mesocosms and aquaria, accompanied with in situ photographic surveys, have shown that the burrowing shrimp Calocaris templemani has a significant impact on bottom sediment dynamics and geochemistry in the St. Lawrence Estuary. This burrowing shrimp establishes and maintains complex semi-permanent burrows made up of several interconnected, ‘U-shaped’ galleries with generally four or more openings to the sediment surface. In the Estuary, at 345 m depth, Calocaris average density was estimated at 3.4 individuals m^?2. Observed individual burrows reached a maximum volume of 0.54 L. C. templemani displaces this volume of mostly anoxic sediments from the subsurface layers (down to 15 cm) to the sediment surface, thereby obscuring some of the natural stratification patterns. With an estimated turnover rate of about 8 L m^?2 year^?1 of sediment, our calculations suggest that over a period of about 18.75 years, all the sediment to a depth of 15 cm will have been reworked by C. templemani alone.