High‐Frequency Continuous Monitoring to Track Vapor Intrusion Resulting From Naturally Occurring Pressure Dynamics

Vapor intrusion characterization efforts can be challenging due to complexities associated with background indoor air constituents, preferential subsurface migration pathways, and response time and representativeness limitations associated with conventional low‐frequency monitoring methods. For sites experiencing trichloroethylene (TCE) vapor intrusion, the potential for acute risks poses additional challenges, as the need for rapid response to exposure exceedances becomes critical in order to minimize health risks and associated liabilities. Continuous monitoring platforms have been deployed to monitor indoor and subsurface concentrations of key volatile constituents, atmospheric pressure, and pressure differential conditions that can result in advective transport. These systems can be comprised of multiplexed laboratory‐grade analytical components integrated with telemetry and geographical information systems for automatically generating time‐stamped renderings of observations and time‐weighted averages through a cloud‐based data management platform. Integrated automatic alerting and responses can also be engaged within one minute of risk exceedance detection. The objectives at a site selected for testing included continuous monitoring of vapor concentrations and related surface and subsurface physical parameters to understand exposure risks over space and time and to evaluate potential mechanisms controlling risk dynamics which could then be used to design a long‐term risk reduction strategy. High‐frequency data collection, processing, and automated visualization efforts have resulted in greater understanding of natural processes such as dynamic contaminant vapor intrusion risk conditions potentially influenced by localized barometric pumping induced by temperature changes. For the selected site, temporal correlation was observed between dynamic indoor TCE vapor concentration, barometric pressure, and pressure differential. This correlation was observed with a predictable daily frequency even for very slight diurnal changes in barometric pressure and associated pressure differentials measured between subslab and indoor regimes and suggests that advective vapor transport and intrusion can result in elevated indoor TCE concentrations well above risk levels even with low‐to‐modest pressure differentials. This indicates that vapor intrusion can occur in response to diurnal pressure dynamics in coastal regions and suggests that similar natural phenomenon may control vapor intrusion dynamics in other regions, exhibiting similar pressure, geochemical, hydrogeologic, and climatic conditions. While dynamic indoor TCE concentrations have been observed in this coastal environment, questions remain regarding whether this hydrogeologic and climatic setting represent a special case, and how best to determine when continuous monitoring should be required to most appropriately minimize exposure durations as early as possible. ©2017 Wiley Periodicals, Inc.     

Vapor intrusion risk evaluation using automated continuous chemical and physical parameter monitoring

Vapor intrusion risk characterization efforts are challenging due to complexities associated with background indoor air constituents, preferential subsurface migration pathways, and representativeness limitations associated with traditional randomly timed time‐integrated sampling methods that do not sufficiently account for factors controlling concentration dynamics. The U.S. Environmental Protection Agency recommends basing risk related decisions on the reasonable maximum exposure (RME). However, with very few exceptions, practitioners have not been applying this criterion. The RME will most likely occur during upward advective flux conditions. As such, for RME determinations, it is important to sample when upward advective flux conditions are occurring. The most common vapor intrusion assessment efforts include randomly timed sample collection events, and therefore do not accurately yield RME estimates. More specifically, researchers have demonstrated that randomly timed sampling schemes can result in false negative determinations of potential risk corresponding to RMEs. For sites experiencing trichloroethylene (TCE) vapor intrusion, the potential for acute risks poses additional challenges, as there is a critical need for rapid response to exposure exceedances to minimize health risks and liabilities. To address these challenges, continuous monitoring platforms have been deployed to monitor indoor concentrations of key volatile constituents, atmospheric pressure, and pressure differential conditions that can result in upward toxic vapor transport and entry into overlying buildings. This article demonstrates how vapor intrusion RME‐based risks can be successfully and efficiently determined using continuous monitoring of concentration and parameters indicating upward advective chemical flux. Time series analyses from multiple selected 8‐ and 24‐hr time increments during upward advective TCE flux conditions were performed to simulate results expected from the most commonly employed sampling methods. These analyses indicate that, although most of the selected time increments overlap within the same 24‐hr window, results and conclusions vary. As such, these findings demonstrate that continuous monitoring of concentration and parameters such as differential pressure and determination of a time‐weighted concentration average over a selected duration when upward advective flux is occurring can allow for a realistic RME‐based risk estimate.     

Dynamic subsurface explosive vapor concentrations: Observations and implications

Conventional vapor intrusion characterization efforts can be challenging due to background indoor air constituents, preferential subsurface migration pathways, sampling access, and collection method limitations. While it has been recognized that indoor air concentrations are dynamic, until recently it was assumed by many practitioners that subsurface concentrations did not vary widely over time. Newly developed continuous monitoring platforms have been deployed to monitor subsurface concentrations of methane, carbon dioxide, oxygen, hydrogen sulfide, total volatile organic constituents, and atmospheric pressure. These systems have been integrated with telemetry, geographical information systems, and geostatistical algorithms for automatically generating two‐ and three‐dimensional contour images and time‐stamped renderings and playback loops of sensor attributes, and multivariate analyses through a cloud‐based project management platform. The objectives at several selected sites included continuous monitoring of vapor concentrations and related physical parameters to understand explosion risks over space and time and to then design a long‐term risk reduction strategy. High‐frequency data collection, processing, and automated visualization have resulted in greater understanding of natural processes, such as dynamic contaminant vapor intrusion risk conditions potentially influenced by localized barometric pumping. For instance, contemporaneous changes in methane, oxygen, and atmospheric pressure values suggest there is interplay and that vapor intrusion risk may not be constant. As a result, conventional single‐event and composite assessment technologies may not be capable of determining worst‐case risk scenarios in all cases, possibly leading to misrepresentation of receptor and explosion risks. While dynamic risk levels have been observed in several initial continuous monitoring applications, questions remain regarding whether these situations represent special cases and how best to determine when continuous monitoring should be required. Results from a selected case study are presented and implications derived. © 2011 Wiley Periodicals, Inc.     

Overview of state approaches to vapor intrusion: 2018

Regulatory requirements for the evaluation of vapor intrusion vary significantly among states. For site owners and responsible parties that have sites in different regulatory jurisdictions, one challenge is to know and understand how the requirements or expectations for vapor intrusion differ from one jurisdiction to the next. Differences in requirements can make it difficult to manage sites in a consistent manner across jurisdictions. Eklund, Folkes, et al. (2007, February, Environmental Manager, 10–14) published an overview of state guidance for vapor intrusion in 2007 that provided a detailed summary of pathway screening values and other key vapor intrusion policies. An update by Eklund, Beckley, et al. (2012, Remediation, 22, 7–20) was published in 2012, which expanded the evaluation to additional states. Since that time, numerous states have substantially revised their guidance and some states that did not have vapor intrusion‐specific guidance have issued new guidance. This article provides an update to the 2012 study. For each state, the review includes tabulations of the types of screening values included (e.g., groundwater, soil, soil gas, indoor air) and the screening values for selected chemicals that commonly drive vapor intrusion investigations (i.e., trichloroethylene [TCE], tetrachloroethylene, and benzene) along with other compounds of potential interest. In addition, for each state, the article summarizes a number of key policy decisions that are important for the investigation of vapor intrusion including: distance screening criteria, default subsurface to indoor air attenuation factors, mitigation criteria, and policies for evaluation of short‐term TCE exposure.     

Chlorinated vapor intrusion indicators,tracers, and surrogates (ITS): Supplemental measurements for minimizing the number of chemical indoor air samples—Part 1: Vapor intrusion driving forces and related environmental factors

Vapor intrusion (VI) assessment is complicated by spatial and temporal variability, largely due to compounded interactions among the many individual factors that influence the vapor migration pathway from subsurface sources to indoor air. Past research on highly variable indoor air datasets demonstrates that conventional sampling schemes can result in false negative determinations of potential risk corresponding to reasonable maximum exposures (RME). While high‐frequency chemical analysis of individual chlorinated volatile organic compounds (CVOCs) in indoor air is conceptually appealing, it remains largely impractical when numerous buildings are involved and particularly for long‐term monitoring. As more is learned about the challenges with indoor air sampling for VI assessment, it has become clear that alternative approaches are needed to help guide discrete sampling efforts and reduce sampling requirements while maintaining acceptable confidence in exposure characterization. Indicators, tracers, and surrogates (ITS), which include a collection of quantifiable metrics and tools, have been suggested as a potential solution for making VI pathway assessment and long‐term monitoring more informative, efficient, and cost‐effective. This review, compilation, and evaluation of ITS demonstrates how even low numbers of indoor air CVOC samples can provide high levels of confidence for representing the RME levels (e.g., 95th percentile) often sought by regulatory agencies for less than chronic effects. A two‐part compilation of available evidence for select low‐cost ITS is presented, with Part 1 focused on introducing the concepts of ITS, meteorologically based ITS, and the evidence from data‐rich studies to support lower cost CVOC VI assessments. Part 1 includes the results of quantitative analyses on two robust residential building VI datasets, where numerous supplemental metrics were collected concurrently with indoor air concentration data. These are supplemented with additional less‐intensive studies in different circumstances. These analyses show that certain ITS metrics and tools, including differential temperature, differential pressure, and radon (in Part 2), can provide benefits to VI assessment and long‐term monitoring. This includes indicators that narrow the assessment period needed to capture RME conditions, tracers that enhance understanding of the conceptual site model, and aid in the identification of preferential pathways and surrogates that support or substitute for CVOC sampling results. The results of this review provide insight into the scientifically supportable uses of ITS.     

Cost‐Effective Rapid and Long‐Term Screening of Chemical Vapor Intrusion (CVI) Potential: Across Both Space and Time

Reviews including the latest “data‐rich” chemical vapor intrusion‐radon (CVI‐Rn) studies indicate buildings/times can be “screened‐in” as having Rn‐evident‐susceptibility/priority for soil gas intrusion, and elevated‐potential for CVI concerns, or not. These screening methods can supplement conventional indoor‐air chemical sampling, under naturally varying conditions, by prioritizing buildings and times based on indoor Rn levels. Rn is a widespread, naturally occurring component of soil gas and a tracer of soil gas intrusion into the indoor air of overlying buildings. Rn is also an indicator for generally similar behavior of other components of near‐building soil gas, possibly including chemical contaminant vapors. Indoor Rn is easily measured at a low cost, allowing continuous observations from essentially all buildings with the potential for CVI across time. This presents cost savings and other benefits for all CVI stakeholders.     

Conceptual Site Model Development and Phased Remedy Implementation to Achieve Vapor Screening Goals at a Former Dry Cleaner

Tetrachloroethene (PCE) releases at a former dry cleaner resulted in impacts to soil and shallow groundwater beneath and adjacent to the building. Subsurface impacts led to vapor intrusion with PCE concentrations between 900 and 1,200 micrograms per cubic meter (μg/m³) in indoor air. The migration pathways of impacted soil vapor were evaluated through implementation of a helium tracer test and vapor sampling of an exterior concrete block wall. Results confirmed that the concrete block wall acted as a conduit for vapor intrusion into the building. A combination of remediation efforts focused on mass reduction in the source area as well as mitigation efforts to inhibit vapor migration into the building. Excavation of soils beneath the floor slab and installation of a spray‐applied vapor barrier resulted in PCE concentrations in indoor air decreasing by over 97.9 percent. Operation of an active ventilation system installed under the floor slab and groundwater remediation via injections of nano‐scale zero valent iron (nZVI) further reduced PCE concentrations in indoor air by over 99.8 percent compared to baseline conditions. While significant reductions of PCE concentrations in groundwater were observed within two months after injection, maximum reductions to PCE concentrations in indoor air were not observed for an additional 12 months. © 2014 Wiley Periodicals, Inc.     

Remediation techniques for mitigating vapor intrusion from sewer systems to indoor air

Investigations at former dry cleaning sites in Denmark show that sewer systems often are a major vapor intrusion pathway for chlorinated solvents to indoor air. In more than 20 percent of the contaminated drycleaner sites in Central Denmark Region, sewer systems were determined to be a major vapor intrusion pathway. Sewer systems can be a major intrusion pathway if contaminated groundwater intrudes into the sewer and contamination is transported within the sewer pipe by water flow in either free phase or dissolved states. Additionally, the contamination can volatilize from the water phase or soil gas can intrude the sewer system directly. In the sewer, the gas phase can migrate in any direction by convective transport or diffusion. Indications of the sewer as a major intrusion pathway are:

• higher concentrations in the upper floors in buildings,
• higher concentrations in indoor air than expected from soil gas measurements,
• higher concentrations in bathrooms/kitchen than in living rooms,
• chlorinated solvents in the sewer system, and
• a pressure gradient from the sewer system to indoor air.

Measurements to detect whether or not the sewer system is an intrusion pathway are simple. In Central Denmark Region, the concentrations of contaminants are routinely measured in the indoor air at all floors, the outdoor air, behind the water traps in the building, and in the manholes close to the building. The indoor and outdoor air concentration, as well as concentrations in manholes, are measured by passive sampling on sorbent samplers over a 14‐day period, and the measurements inside the sewer system are carried out by active sampling using carbon tubes (sorbent samplers). Furthermore, the pressure gradient over the building slab and between the indoor air and the sewer system are also measured. A simple test is depressurization of the sewer system. Using this technique, the pressure gradient between the sewer system and the indoor air is altered toward the sewer system—the contamination cannot enter the indoor air through the sewer system. If the sewer system is a major intrusion pathway, the effect of the test can be observed immediately in the indoor air. Remediation of a sewer transported contamination can be:

• prevention of the contaminants from intruding into the sewer system or
• prevention of the contaminated gas in the sewer system from intruding into the indoor air.

Remediation techniques include the following:

• lining of the sewer piping to prevent the contamination from intruding into the sewer;
• sealing the sewer system in the building to prevent the contamination from the sewer system to intrude the indoor air;
• venting of manholes; and
• depressurizing the sewer system.

     

Comparing Vapor Intrusion Mitigation System Performance for VOCs and Radon

This article summarizes a long‐term study of vapor intrusion mitigation system performance in a historic, unoccupied residential duplex with an extensive set of temporal variability observations. The experimental design included multiple cycles of subslab depressurization (SSD) system operation and shut‐off during a seven‐month period, followed by a year‐long period of continuous operation. Results showed that the system provided rapid pressure field extension and radon control as much as 100 days of operation before optimum volatile organic compound (VOC) mitigation was achieved. Greater variability in VOC concentrations than in radon concentrations was observed during the initial mitigation system cycling. Subslab VOC concentrations at numerous locations increased during this initial period of SSD operation, and indoor air VOC concentrations were more variable than radon. However, indoor air concentrations were considerably less variable (and lower) during the first year of continuous mitigation system operation. ©2015 Wiley Periodicals, Inc.     

Residential vapor‐intrusion evaluation: Long‐duration passive sampling vs. short‐duration active sampling

Sampling indoor air for potential vapor‐intrusion impacts using current standard 24‐hour sample collection methods may not adequately account for temporal variability and detect contamination best represented by long‐term sampling periods. Henry Schuver of the U.S. Environmental Protection Agency Office of Solid Waste stated at the September 2007 Air & Waste Management Association vapor‐intrusion conference that the US EPA may consider recommending longer‐term vapor sampling to achieve more accurate time‐weighted‐average detections. In November 2007, indoor air at four residences was sampled to measure trichloroethene (TCE) concentrations over short‐ and long‐duration intervals. A carefully designed investigation was conducted consisting of triplicate samplers for three different investigatory methods: dedicated 6‐liter Summa canisters (US EPA Method TO‐15), pump/sorbent tubes (US EPA Method TO‐17), and passive diffusion samplers (MDHS 80). The first two methods collected samples simultaneously for a 24‐hour period, and the third method collected samples for two weeks. Data collected using Methods TO‐15 (canisters) and TO‐17 (tubes) provided reliable short‐duration TCE concentrations that agree with prior 24‐hour sampling events in each of the residences; however, the passive diffusion samplers may provide a more representative time‐weighted measurement. The ratio of measured TCE concentrations between the canisters and tubes are consistent with previous results and as much as 28.0 μg/m³ were measured. A comparison of the sampling procedures, and findings of the three methods used in this study will be presented. © 2008 Wiley Periodicals, Inc.     

Vapor Intrusion Monitoring Method Cost Comparisons: Automated Continuous Analytical Versus Discrete Time‐Integrated Passive Approaches

Vapor intrusion characterization efforts are challenging due to complexities associated with indoor background sources, preferential subsurface migration pathways, indoor and shallow subsurface concentration dynamics, and representativeness limitations associated with manual monitoring and characterization methods. For sites experiencing trichloroethylene (TCE) vapor intrusion, the potential for acute risks poses additional challenges, as the need for rapid response to acute toxicity threshold exceedances is critical in order to minimize health risks and associated liabilities. Currently accepted discrete time‐integrated vapor intrusion monitoring methods that employ passive diffusion–adsorption and canister samplers often do not result in sufficient temporal or spatial sampling resolution in dynamic settings, have a propensity to yield false negative and false positive results, and are not able to prevent receptors from acute exposure risks, as sample processing times exceed exposure durations of concern. Multiple lines of evidence have been advocated for in an attempt to reduce some of these uncertainties. However, implementation of multiple lines of evidence do not afford rapid response capabilities and typically rely on discrete time‐integrated sample collection methods prone to nonrepresentative results due to concentration dynamics. Recent technology innovations have resulted in the deployment of continuous monitoring platforms composed of multiplexed laboratory grade analytical components integrated with quality control features, telemetry, geographical information systems, and interpolation algorithms for automatically generating geospatial time stamped renderings and time‐weighted averages through a cloud‐based data management platform. Automated alerts and responses can be engaged within 1 minute of a threshold exceedance detection. Superior temporal and spatial resolution also results in optimized remediation design and mitigation system performance confirmation. While continuous monitoring has been acknowledged by the regulatory community as a viable option for providing superior results when addressing spatial and temporal dynamics, until very recently, these approaches have been considered impractical due to cost constraints and instrumentation limitations. Recent instrumentation advancements via automation and multiplexing allow for rapid and continuous assessment and response from multiple locations using a single instrument. These advancements have reduced costs to the point where they are now competitive with discrete time‐integrated methods. In order to gain more regulatory and industry support for these viable options, there is an immediate need to perform a realistic cost comparison between currently approved discrete time‐integrated methods and newly fielded continuous monitoring platforms. Regulatory support for continuous monitoring platforms will result in more effectively protecting the public, provide property owners with information sufficient to more accurately address potential liabilities, reduce unnecessary remediation costs for situations where risks are minimal, lead to more effective and surgical remediation strategies, and allow practitioners to most effectively evaluate remediation system performance. To address this need, a series of common monitoring scenarios and associated assumptions were derived and cost comparisons performed. Scenarios included variables such as number of monitoring locations, duration, costs to meet quality control requirements, and number of analyses performed within a given monitoring campaign. Results from this effort suggest that for relatively larger sites where five or more locations will be monitored (e.g., large buildings, multistructure industrial complexes, educational facilities, or shallow groundwater plumes with significant spatial footprints under residential neighborhoods), procurement of continuous monitoring services is often less expensive than implementation of discrete time‐integrated monitoring services. For instance, for a 1‐week monitoring campaign, costs‐per‐analysis for continuous monitoring ranges from approximately 1 to 3 percent of discrete time‐integrated method costs for the scenarios investigated. Over this same one‐week duration, for discrete time‐integrated options, the number of sample analyses equals the number of data collection points (which ranged from 5 to 30 for this effort). In contrast, the number of analyses per week for the continuous monitoring option equals 672, or four analyses per hour. This investigation also suggests that continuous automated monitoring can be cost‐effective for multiple one‐week campaigns on a quarterly or semi‐annual basis in lieu of discrete time‐integrated monitoring options. In addition to cost benefits, automated responses are embedded within the continuous monitoring service and, therefore, provide acute TCE risk‐preventative capabilities that are not possible using discrete time‐integrated passive sampling methods, as the discrete time‐integrated services include analytical efforts that require more time than the exposure duration of concern. ©2016 Wiley Periodicals, Inc.     

Addressing soil gas vapor intrusion using sustainable building solutions

Soil gas vapor intrusion (VI) emerged in the 1990s as one of the most important problems in the investigation and cleanup of thousands of sites across the United States. A common practice for sites where VI has been determined to be a significant pathway is to implement interim building engineering controls to mitigate exposure of building occupants to VI while the source of contamination in underlying soil and groundwater is assessed and remediated. Engineering controls may include passive barriers, passive or active venting, subslab depressurization, building pressurization, and sealing the building envelope. Another recent trend is the emphasis on “green” building practices, which coincidentally incorporate some of these same engineering controls, as well as other measures such as increased ventilation and building commissioning for energy conservation and indoor air quality. These green building practices can also be used as components of VI solutions. This article evaluates the sustainability of engineering controls in solving VI problems, both in terms of long‐term effectiveness and “green” attributes. Long‐term effectiveness is inferred from extensive experience using similar engineering controls to mitigate intrusion of radon, moisture, mold, and methane into structures. Studies are needed to confirm that engineering controls to prevent VI can have similar long‐term effectiveness. This article demonstrates that using engineering controls to prevent VI is “green” in accelerating redevelopment of contaminated sites, improving indoor air quality, and minimizing material use, energy consumption, greenhouse gas emissions, and waste generation. It is anticipated that engineering controls can be used successfully as sustainable solutions to VI problems at some sites, such as those deemed technically impracticable to clean up, where remediation of underlying soil or groundwater contamination will not be completed in the foreseeable future. Furthermore, green buildings to be developed in areas of potential soil or groundwater contamination may be designed to incorporate engineering controls to prevent VI. © 2009 Wiley Periodicals, Inc.     

Overview of state approaches to vapor intrusion

A large number of states have issued guidance addressing the vapor intrusion pathway making it difficult to keep up with various policies and requirements. We have compiled and reviewed guidance from 35 states, half of which have issued documents within the last three years. A comparison of policies among states shows reasonable consistency in some areas—for example, 20 of 23 states that provide an exclusion distance for subsurface sources of chlorinated volatile organic compounds (VOCs) use a distance of 100 feet. However, more commonly, the policy decisions vary widely. Among states, indoor air screening concentrations for the same VOC vary by more than 2,000 times and subsurface screening concentrations vary by more than 2,000,000 times. These wide discrepancies suggest a need for communication and consensus building in order to increase consistency in the management of the vapor intrusion pathway. © 2012 Wiley Periodicals, Inc.     

ART in‐well air stripping—An innovative technology succeeds where other technologies have failed

Accelerated Remediation Technologies LLC (ART) developed a proprietary (patent‐pending) effective remediation technology that is based on verified and established concepts. The ART technology combines in‐situ air stripping, air sparging, soil vapor extraction, enhanced bioremediation/oxidation, and Dynamic Subsurface Circulation^TM in an innovative wellhead system. The system is designed to accommodate a 4‐inch well and is cost‐effective when compared with other remediation technologies. The air‐sparging component results in lifting the water table. This lifting of the water in the well causes a net reduction in head at the well location. Vacuum pressure (the vapor‐extraction component) is applied on top of the well point to extract vapor from the subsurface. The negative pressure from the vacuum extraction results in water suction that creates additional water lifting (mounding). A submersible pump is placed at the bottom of the well to recirculate water to the top for downward discharge through a spray head. The water cascades down the interior of the well similar to what occurs in an air‐stripping tower. Enhanced stripping via air sparging near the bottom of the well occurs simultaneously. In essence, the well acts as a subsurface air‐stripping tower. The pumped‐and‐stripped, highly oxygenated water flows down well annulus and over the “mounded” water back in to the aquifer, which creates a circulation zone around the well to further enhance cleanup. The ART technology has been implemented at several sites nationwide, including industrial laundry facilities, manufacturing plants, and service stations, and has achieved significant reductions in contaminant concentrations. Specifically, a concentration of tetrachloroethene (PCE) decreased from 2,700 to 240 μg/l, in 13 days. In less than three months, the concentrations dropped further to 79 μg/l, which is within the range of background levels. Other sites utilizing the technology have exhibited similar reduction trends in complex subsurface environments. © 2002 Wiley Periodicals, Inc.     

Understanding and Managing Indoor Air Exposure Assessments at RCRA Sites

The 2000 RCRA National Conference was conducted August 15‐17, 2000, in Washington, D.C., to allow state and federal authorities to review regulatory issues associated with the Resource Conservation and Recovery Act (RCRA) program. One of the RCRA reform issues discussed at the conference included the Government Performance and Results Act (GPRA) Environmental Indicators (EI). EIs have been designed to provide clarity in cleanup objectives and spur progress towards meeting the U.S. Environmental Protection Agency's (USEPA's) national RCRA cleanup goals. This article focuses on the human exposure indicator and, more specifically, on indoor air exposures and how to assess whether such exposure is actually occurring. While indoor air exposure can be a critical component of the human exposure scenarios, realistic predictions of the exposures are difficult to produce. This article provides an overview of the regulatory issues related to the indoor air exposure pathway. It also discusses the use of modeling in criteria development and risk evaluation and presents a case study of how the USEPA wants the modeling to occur, and an opinion of where this RCRA reform issue is heading and how to evaluate indoor air exposures.     

An evaluation of the performance of multiple passive diffusion devices for indoor air sampling of VOCs

The United States Environmental Protection Agency is considering recommending longer‐term sampling to achieve more accurate time‐weighted‐average detections for indoor air monitoring of volatile organic chemicals. The purpose of the research presented herein was to compare longer sampling times using passive diffusion samplers to the results from shorter‐term testing periods using sorbent tubes and low‐flow pumps (US EPA Method TO‐17) at great frequency for trichloroethene (TCE) in indoor air. A controlled release of TCE in a large room allowed for over two‐orders‐of‐magnitude daily concentration variability over the course of the two‐week monitoring event. The daily concentration measurements by US EPA Method TO‐17 and the passive diffusion samplers were performed in triplicate and had excellent reproducibility. The results of daily tests were averaged and compared with four passive diffusion devices exposed to indoor air for three, seven, ten, and fourteen days in accordance with ASTM D6196‐02. A specific uptake rate for each of the passive devices at the four different time intervals and the statistical significance of the time‐varying uptake rates were evaluated. The performance of each passive diffusion device was determined using a statistical performance criterion. The average concentration for all of the exposure periods could be reliably predicted using the established uptake rates for two of the four passive devices. © 2009 Wiley Periodicals, Inc.     

ART in‐well technology proves effective in treating 1,4‐dioxane contamination

A common industrial solvent additive is 1,4‐dioxane. Contamination of dissolved 1,4‐dioxane in groundwater has been found to be recalcitrant to removal by conventional, low‐cost remedial technologies. Only costly labor and energy‐intensive pump‐and‐treat remedial options have been shown to be effective remedies. However, the capital and extended operation and maintenance costs render pump‐and‐treat technologies economically unfeasible at many sites. Furthermore, pump‐and‐treat approaches at remediation sites have frequently been proven over time to merely achieve containment rather than site closure. A major manufacturer in North Carolina was faced with the challenge of cleaning up 1,4‐dioxane and volatile organic compound–impacted soil and groundwater at its site. Significant costs associated with the application of conventional approaches to treating 1,4‐dioxane in groundwater led to an alternative analysis of emerging technologies. As a result of the success of the Accelerated Remediation Technologies, LLC (ART) In‐Well Technology at other sites impacted with recalcitrant compounds such as methyl tertiarybutyl ether, and the demonstrated success of efficient mass removal, an ART pilot test was conducted. The ART Technology combines in situ air stripping, air sparging, soil vapor extraction, enhanced bioremediation/oxidation, and dynamic subsurface groundwater circulation. Monitoring results from the pilot test show that 1,4‐dioxane concentrations were reduced by up to 90 percent in monitoring wells within 90 days. The removal rate of chlorinated compounds from one ART well exceeded the removal achieved by the multipoint soil vapor extraction/air sparging system by more than 80 times. © 2005 Wiley Periodicals, Inc.     

Building pressure control test to examine if VOC contamination in indoor air is caused by an interior source or by a subslab source

When determining whether or not remediation of subslab contamination is warranted, it is often important to know if the presence of volatile organic compounds (VOCs) in indoor air is caused primarily by interior sources, or primarily by subslab contamination. With a Building Pressure Control test, the pressure differential across the building envelope and, thereby, also the pressure differential across the slab, can be controlled by a blower. By measuring the indoor air concentrations of VOCs under depressurization (upward pressure gradient over the slab) and under pressurization (downward pressure gradient over the slab), it can be determined if the subslab contamination contributes significantly to the VOC concentrations in indoor air. This technique has been applied at several sites in the Central Denmark Region, and the results show that a Building Pressure Control test is a quick and effective method to examine if VOC contamination in indoor air is caused primarily by interior sources or primarily by subslab sources. With numerous measurement points in the indoor air, at some sites this test method has identified the area where the subslab contamination is located. A pressure differential at ?5/+5 Pa across the building envelope was sufficient at all the test sites to control the pressure gradient across the slab to be uniquely upward/downward.     

Management Systems Approach to Building Vapor Intrusion: A Facility Manager's Guide

Vapor intrusion (VI) has the potential to affect over 100,000 developed and undeveloped sites in the United States. Vapor intrusion occurs when the migration of volatile chemicals from the subsurface enters overlying buildings. A myriad of adverse health effects have been documented based on the inhalation of volatile chemicals from VI. At a time when most state and federal agencies have yet to set firm standards, the burden of responsibility is often placed on the facility manager to decide how to protect building occupants from volatile organic compounds potentially seeping into buildings. This article outlines a detailed step‐by‐step process for facility managers on how to begin a VI assessment and, when warranted, establish a site‐specific vapor intrusion management system for building occupant protection. This document should be used concurrently with current federal and state guidelines as it pertains to VI. © 2014 Wiley Periodicals, Inc.     

Introduction to Therm Net Technology

The Introduction to Therm Net technology is an overview of how radio frequency (RF) beating can be implemented to enhance conventional remediation technologies. Included in the article is a case study of a project conducted in March 1996 at a gasoline release site. The project consisted of a “hot spot” application to reduce BETX concentrations to achieve site closure. The application consisted of RF heating, soil vapor extraction, and groundwater ventilation. A bench scale study was also conducted to measure the effects that RF heating and vapor extraction had on the removal of PAH constitutents from a coal tar sludge. Up to 100 percent reductions were observed for some of the constituents in the study. Also included is a graphical representation of temperature versus vapor pressure for contaminants typically encountered at remediation sites, illustrating that as temperature increases, the removal rate increases.