Engineered containment systems: Identification of dominant ecological processes for long‐term performance assessment and monitoring

The infiltration of rainfall into contaminated soils and wastes provides the mechanism whereby hazardous chemical and radionuclide constituents of concern are leached and transported to underlying groundwater and potential human and ecological receptors. The application of engineered covers to reduce rainfall infiltration is an approach that is often selected for the remediation of contaminated sites. Evapotranspiration, or water‐balance, cover designs have been shown to be effective ways of preventing infiltration in arid and semiarid climates. This particular design relies on evaporation and vegetative transpiration to reduce potential infiltration to acceptable levels. In this article, we identify and examine the dominant ecological processes that affect the performance of evapotranspiration cover designs. © 2012 Wiley Periodicals, Inc.     

Incorporating ecology and ecological risk into long‐term stewardship on contaminated sites

The long‐term management of environmental contamination will be a major activity at many sites in the foreseeable future. While human health issues often drive decisions about cleanup, restoration, and long‐term stewardship, ecological considerations are also major driving forces and are of paramount importance to the public. Incorporation of ecological considerations into decisions about environmental protection, both short term and long term, requires (1) understanding public perceptions of ecological values, including aesthetics and existence values, (2) understanding contamination issues within a context of the structure and functioning of ecosystems, (3) developing bioindicators of ecological health (including human), (4) developing indicators of ecosystem functioning, and (5) developing and implementing a biomonitoring plan before, during, and after remediation so that adverse effects can be ascertained before they become irreversible. Both remediation/restoration and long‐term stewardship goals must be informed by public policy mandates that include public participation and healthy human and ecological systems. This article examines these issues as they relate to cost‐effective, long‐term protection of human and ecological health on contaminated lands. © 2002 Wiley Periodicals, Inc.     

Geochemical evaluation of metals in groundwater at long‐term monitoring sites and active remediation sites

At many sites, long‐term monitoring (LTM) programs include metals as chemicals of concern, although they may not be site‐related contaminants and their detected concentrations may be natural. At other sites, active remediation of organic contaminants in groundwater results in changes to local geochemical conditions that affect metal concentrations. Metals should be carefully considered at both types of sites, even if they are not primary contaminants of concern. Geochemical evaluation can be performed at LTM sites to determine if the monitored metals reflect naturally high background and, hence, can be removed from the analytical program. Geochemical evaluation can also be performed pre‐ and post‐treatment at active remediation sites to document the effects of organics remediation on metals and identify the processes controlling metal concentrations. Examples from both types of sites are presented in this article. © 2008 Wiley Periodicals, Inc.     

Using integrated food‐web and population‐based models for environmental monitoring,remediation decisions,and long‐term planning

While ecologists have used food‐web models to understand how ecosystems function, the potential role of integrated food‐web and population‐based models in environmental monitoring and decision making has been ignored. Sound ecological principles should be integrated with state‐of‐the‐art monitoring and management practices. This article presents the ways in which population‐based models can answer basic ecological questions necessary for decision making about remediation and restoration, and for monitoring to ensure long‐term stewardship. Discussed are the uses of food‐web and population‐based models for understanding the movement of chemicals through different trophic levels. Three examples, including global warming, tributyltin, and monomethylmercury scenarios, are presented to illustrate how such models are useful. The responses of the component parts varies, depending on parameters such as birth, death, and respiration, as well as feeding rates, predator‐prey rates, and uptake and elimination rates. There are several different models available for decision making, with different levels of complexity, based on the specific hypothesis or question being asked and the amount of current information available. Therefore, it is recommended to use deterministic‐based, population‐based food‐web models for ecological risk assessment. © 2001 John Wiley & Sons, Inc.     

Formerly utilized sites remedial action program “completed” sites: Lessons for long‐term stewardship

The Formerly Utilized Sites Remedial Action Program (FUSRAP) covers inactive commercial, federal, and university facilities that once supported activities of the Manhattan Project or Atomic Energy Commission. Current responsibilities, established by a Memorandum of Understanding (MOU), are split between the U.S. Department of Energy (US DOE) and the U.S. Army Corps of Engineers. The MOU distinguishes between facilities remediated before 1997 (“completed” sites) and those where remediation remained to be completed at that time. This article evaluates activities conducted at completed sites with regard to considerations for long‐term stewardship, which is defined by the US DOE as all activities necessary to protect human health and the environment after remediation is considered complete. Experience with these FUSRAP sites provides “lessons learned” for the requirements of satisfactory long‐term stewardship. © 2007 Wiley Periodicals, Inc.     

Occurrence and behavior of per‐ and polyfluoroalkyl substances from aqueous film‐forming foam in groundwater systems

Per‐ and polyfluoroalkyl substances (PFAS) are fluorinated compounds and the active ingredient in aqueous film‐forming foam (AFFF). AFFF has been identified as a significant source of PFAS contamination in groundwater. PFAS are also present in many other industrial and consumer products and their manufacture and use has led to numerous contaminated sites. Human health risks have been identified with studies linking firefighter cancers to training facilities where AFFF was used. Given the widespread release of these compounds to the environment and their potential health risks, understanding their mobility characteristics is important. This article details the occurrence and behavior of these substances in groundwater systems to help guide the emerging fields of PFAS investigation and remediation. Background is presented on AFFF and PFAS source characteristics, including common industrial and consumer PFAS sources. In addition, chemical properties, sorption and retention parameters, and observed transformation properties of PFAS and related compounds are discussed. Finally, knowledge gaps are identified for future laboratory and field studies.     

Long‐term evaluation of an EHC injection permeable reactive barrier in a sulfate‐rich,high‐flow aquifer

Permeable reactive barriers (PRBs) have traditionally been constructed via trenching backfilled with granular, long‐lasting materials. Over the last decade, direct push injection PRBs with fine‐grained injectable reagents have gained popularity as a more cost‐efficient and less‐invasive approach compared to trenching. A direct push injection PRB was installed in 2005 to intercept a 2,500 feet (760 meter) long carbon tetrachloride (CT) groundwater plume at a site in Kansas. The PRB was constructed by injecting EHC^® in situ chemical reduction reagent slurry into a line of direct push injection points. EHC is composed of slow‐release plant‐derived organic carbon plus microscale zero‐valent iron (ZVI) particles, specifically formulated for injection applications. This project was the first full‐scale application of EHC into a flow‐through reactive zone and provided valuable information about substrate longevity and PRB performance over time. Groundwater velocity at the site is high (1.8 feet per day) and sulfate‐rich (~120 milligrams per liter), potentially affecting the rate of substrate consumption and the PRB reactive life. CT removal rates peaked 16 months after PRB installation with >99% removal observed. Two years post‐installation removal rates decreased to approximately 95% and have since stabilized at that level for the 12 years of monitoring data available after injection. Geochemical data indicate that the organic carbon component of EHC was mostly consumed after 2 years; however, reducing conditions and a high degree of chloromethane treatment were maintained for several years after total organic carbon concentrations returned to background. Redox conditions are slowly reverting and have returned close to background conditions after 12 years, indicating that the PRB may be nearing the end of its reactive life. Direct measurements of iron have not been performed, but stoichiometric demand calculations suggest that the ZVI component of EHC may, in theory, last for up to 33 years. However, the ZVI component by itself would not be expected to support the level of treatment observed after the organic carbon substrate had been depleted. A longevity of up to 5 years was originally estimated for the EHC PRB based on the maximum expected longevity of the organic carbon substrate. While the organic carbon was consumed faster than expected, the PRB has continued to support a high degree of chloromethane treatment for a significantly longer time period of over 12 years. Recycling of biomass and the contribution from a reduced iron sulfide mineral zone are discussed as possible explanations for the sustained reducing conditions and continued chloromethane treatment.     

Life‐cycle assessment of in situ thermal remediation

A detailed cradle‐to‐grave life‐cycle assessment (LCA) of an in situ thermal treatment remedy for a chlorinated‐solvent‐contaminated site was performed using process LCA. The major materials and activities necessary to install, operate, monitor, and deconstruct the remedy were included in the analysis. The analysis was based on an actual site remedy design and implementation to determine the potential environmental impacts, pinpoint major contributors to impacts, and identify opportunities for improvements during future implementation. The Electro‐Thermal Dynamic Stripping Process (ET‐DSP?) in situ thermal technology coupled with a dual‐phase extraction and treatment system was evaluated for the remediation of 4,400 yd³ of tetrachloroethene‐ and trichloroethene‐impacted soil, groundwater, and bedrock. The analysis was based on an actual site with an estimated source mass of 2,200 lbs of chlorinated solvents. The remedy was separated into four stages: remedy installation, remedy operation, monitoring, and remedy deconstruction. Environmental impacts were assessed using Sima Pro software, the ecoinvent database, and the ReCiPe midpoint and endpoint methods. The operation stage of the remedy dominated the environmental impacts across all categories due to the large amount of electricity required by the thermal treatment technology. Alternate sources of electricity could significantly reduce the environmental impacts of the remedy across all impact categories. Other large impacts were observed in the installation stage resulting from the large amount of diesel fuel, steel, activated carbon, and asphalt materials required to implement the technology. These impacts suggest where opportunities for footprint reductions can be found through best management practices such as increased materials reuse, increased recycled‐content materials use, and clean fuels and emission control technologies. Smaller impacts were observed in the monitoring and deconstruction stages. Normalized results show the largest environmental burdens to fossil depletion, human toxicity, particulate matter formation, and climate‐change categories resulting from activities associated with mining of fossil fuels for use in electricity production. In situ thermal treatment can reliably remediate contaminated source areas with contaminants located in low‐permeability zones, providing complete destruction of contaminants in a short amount of time, quick return of the site to productive use, and minimized quantities of hazardous materials stored in landfills for future generations to remediate. However, this remediation strategy can also result in significant emissions over a short period of time. It is difficult to quantify the overall value of short‐term cleanups with intense treatment emissions against longer‐term cleanups with lower treatment emissions because of the environmental, social, and economic trade‐offs that need to be considered and understood. LCA is a robust, quantitative tool to help inform stakeholder discussions related to the remedy selection process, trade‐off considerations, and environmental footprint‐reduction opportunities, and to complement a broader toolbox for the evaluation of sustainable remediation strategies. © 2012 Wiley Periodicals, Inc.     

Passive to active tie‐in for soil gas surveys: Improved technique for source‐area,spatial variability,remediation‐monitoring,and vapor‐intrusion assessment

The mass‐to‐concentration tie‐in (MtoC Tie‐In) correlates passive soil gas (PSG) data in mass to active soil gas data in concentration determined by the US EPA Method TO‐17 or TO‐15. Passive soil gas surveys consist of rapid deployment of hydrophobic sorbents (dozens to several hundred locations typically installed in one day) to a depth of six inches to three feet in a grid pattern with exposure in the field from three days to two weeks to target a wide variety of organic compounds. A power function is used on a compound‐to‐compound basis to correlate spatially varying mass (nanograms) from selected locations within a passive soil gas survey to concentration (µg/m³) at those same locations. The correlation from selected PSG locations is applied to the remainder of the PSG grid. The MtoC Tie‐In correlations provide added value to a PSG survey, with the PSG data then used to estimate risk throughout the limits of the investigation for quantitative assessment. The results from a site in northern California show the MtoC Tie‐In correlations for both benzene and total petroleum hydrocarbons (TPH). The correlations are applied on a compound‐to‐compound basis to the remaining locations in the PSG grid to provide an estimate of concentration that can be used for comparison to risk/screening levels or fate‐and‐transport diagnostic tools (partitioning equations, solubility laws, etc.). An example of how the correlations are applied is presented in tabular form. The results from a chlorinated solvent survey show the MtoC Tie‐In correlation from a site in Maryland for tetrachloroethene (PCE). In this instance, there was a near‐perfect relationship between the PSG mass and the active soil gas concentration (R² value of 1). The concentration estimated throughout a PSG grid enables a vast new realm of interpretive power at sites. Several other sites are discussed, including an example application for groundwater. © 2009 Wiley Periodicals, Inc.     

化工项目环境风险评价中危险物质临界量的界定

在依据HJ 169—2018《建设项目环境风险评价技术导则》进行危险物质临界量界定的实际应用中,发现该导则存在危险物质种类及危险性质涵盖不全的问题。对比研究了与之相关的HJ 169—2004《建设项目环境风险评价技术导则》、HJ 941—2018《企业突发环境事件风险分级方法》、GB 18218—2018《危险化学品重大危险源辨识》、《赛维索指令Ⅲ》等技术规范和标准,构建了基于上述规范的危险物质临界量界定技术路线,为化工项目环境风险评价的实际工作提供借鉴。     

Performance assessment of hanging funnel‐and‐gate structures designed by reverse particle tracking for capturing polluted groundwater

The objective of this study was to evaluate the capability of partially penetrating (hanging) funnel‐and‐gate structures, designed using reverse flow trajectories, for capturing plumes of contaminated groundwater. Linear capture structures, comprised of two slurry cutoff walls on either side of a permeable gate, were positioned perpendicular to regional groundwater flow in a hypothetical unconfined aquifer. A four‐step approach was used for each of two simulated settings: (1) a numerical mass transport model generated a contaminant plume originating from a source area; (2) a particle‐tracking model projected groundwater flow paths upstream from a treatment gate; (3) the structure was widened and deepened until bounding path lines contained the plume; and (4) mass transport simulation tested the ability of the structure to capture the plume. Results of this study suggest that designing funnel‐and‐gate structures using reverse particle tracking may result in too small a structure to capture a contaminant plume. This practice generally ignores effects of hydrodynamic dispersion, which may enlarge plumes such that contaminants move beneath or around a capture structure. This bypassing effect may be considerable even for low values of dispersivity. Particle‐tracking approaches may also underestimate the amount of time required to reduce contaminant concentrations to acceptable levels. © 2007 Wiley Periodicals, Inc.     

Steady‐state field‐scale gas permeability estimation and pore‐gas velocity calculation in a domain open to the atmosphere

Field‐scale estimation of gas permeability and subsequent computation of pore‐gas velocity profiles are critical elements of sound soil venting design. It has been our experience, however, in U.S. Environmental Protection Agency's (EPA's) technical assistance program, provided by the Office of Research and Development in support EPA regional offices, that many venting practitioners are unaware of equations and data interpretation methods appropriate for gas permeability estimation and pore‐gas velocity computation. To ameliorate this situation, we use data collected at a U.S. Coast Guard Station in Traverse City, Michigan, to demonstrate gets permeability estimation and pore‐gas velocity calculation for steady‐state, axisymmetric, two‐dimensional gas flow in a domain open to the atmosphere. For gas permeability estimation, we use random guesses constrained with decreasing intervals of radial and vertical permeabilityand analysis of root mean square errors to ensure attainment of a global versus local minimum. We demonstrate confidence in permeability estimation by providing plots of observed versus simulated pressure response. Finally, we illustrate how plots of pore‐gas velocity as a function of distance and flow rate can be helpful in venting design.     

Continuous water‐level monitoring in the assessment of groundwater remediation and refinement of a conceptual site model

An Erratum has been published for this article in Remediation 16(1) 2005, 155–157. Water‐level data collection is a fundamental component of groundwater investigations and remediation. While the locations and depths of monitored wells are important, the frequency of data collection may have a large impact on conclusions made about site hydrogeology. Data‐logging water‐level probes may be programmed to record water levels at frequent intervals, providing site decision makers with abundant, detailed information on the response of an aquifer to both anticipated and unforeseen stresses. In this study, a network of movable probes has provided several years of hourly water‐ level data. The understanding of the site's phytoremediation system has been enhanced by the continuous data, but subsequent insights into an unexpected situation regarding the site's infrastructure have been the most valuable result of the monitoring program. © 2005 Wiley Periodicals, Inc.     

Stable Isotope Probing to Confirm Field‐Scale Co‐Metabolic Biodegradation of 1,4‐Dioxane

1,4‐Dioxane, a common co‐contaminant with chlorinated solvents, is present in groundwater at Site 24 at Vandenberg Air Force Base in California. Historical use of chlorinated solvents resulted in concentrations of 1,4‐dioxane in groundwater up to approximately 2,000 μg/L. Starting in 2013, an in situ propane biosparge system operation demonstrated reductions in 1,4‐dioxane concentrations in groundwater. The work detailed herein extends the efforts of the first field demonstration to a second phase and confirms the biodegradation mechanism via use of stable isotope probing (SIP). After two months of operation, 1,4‐dioxane concentrations decreased approximately 45 to 83 percent at monitoring locations in the test area. The results of the SIP confirmed ¹³C‐enriched 1,4‐dioxane was transformed into dissolved inorganic carbon (suggesting mineralization to carbon dioxide) and incorporated into microbial biomass (likely attributed to metabolic uptake of biotransformation intermediates or of carbon dioxide).  ©2016 Wiley Periodicals, Inc.     

Remediating TCE‐contaminated groundwater in low‐permeability media using hydraulic fracturing to emplace zero‐valent iron/organic carbon amendment

A field pilot test in which hydraulic fracturing was used to emplace granular remediation amendment (a mixture of zero‐valent iron [ZVI] and organic carbon) into fine‐grained sandstone to remediate dissolved trichloroethene (TCE)‐contaminated groundwater was performed at a former intercontinental ballistic missile site in Colorado. Hydraulic fracturing was used to enhance the permeability of the aquifer with concurrent emplacement of amendment that facilitates TCE degradation. Geophysical monitoring and inverse modeling show that the network of amendment‐filled fractures extends throughout the aquifer volume targeted in the pilot test zone. Two years of subsequent groundwater monitoring demonstrate that amendment addition resulted in development of geochemical conditions favorable to both abiotic and biological TCE degradation, that TCE concentrations were substantially reduced (i.e., greater than 90 percent reduction in TCE mass), and that the primary degradation processes are likely abiotic. The pilot‐test data aided in re‐evaluating the conceptual site model and in designing the full‐scale remedy to address a larger portion of the TCE‐contaminated groundwater plume. © 2012 Wiley Periodicals, Inc.     

Application of the operating window concept to remediation‐option selection

An Erratum has been published for this article in Remediation 14(4) 2004, 141. The selection of remediation options for the management of unacceptable risks at contaminated sites is hindered by insufficient information on their performance under different site conditions. Therefore, there is a need to define “operating windows” for individual remediation options to summarize their performance under a variety of site conditions. The concept of the “operating window” has been applied as both a performance optimization tool and decision support tool in a number of different industries. Remediation‐option operating windows could be used as decision support tools during the “options appraisal” stage of the Model Procedures (CLR 11), proposed by the Environment Agency (EA) for England and Wales, to enhance the identification of “feasible remediation options” for “relevant pollutant linkages.” The development of remediation‐option operating windows involves: 1) the determination of relationships between site conditions (“critical variables”) and option performance parameters (e.g., contaminant degradation or removal rates) and 2) the identification of upper‐ and lower‐limit values (“operational limits”) for these variables that define the ranges of site conditions over which option performance is likely to be sufficient (the “operating window”) and insufficient (the “operating wall”) for managing risk. Some research has used case study data to determine relationships between critical variables and subsurface natural attenuation (NA) process rates. Despite the various challenges associated with the approach, these studies suggest that available case study data can be used to develop operating windows for monitored natural attenuation (MNA) and, indeed, other remediation options. It is envisaged that the development of remediation‐option operating windows will encourage the application of more innovative remediation options as opposed to excavation and disposal to landfill and/or on‐site containment, which remain the most commonly employed options in many countries. © 2004 Wiley Periodicals, Inc.     

Environmental & economic life cycle assessment of current & future sewage sludge to energy technologies

The UK Water Industry currently generates approximately 800 GW h pa of electrical energy from sewage sludge. Traditionally energy recovery from sewage sludge features Anaerobic Digestion (AD) with biogas utilisation in combined heat and power (CHP) systems. However, the industry is evolving and a number of developments that extract more energy from sludge are either being implemented or are nearing full scale demonstration. This study compared five technology configurations: 1 – conventional AD with CHP, 2 – Thermal Hydrolysis Process (THP) AD with CHP, 3 – THP AD with bio-methane grid injection, 4 – THP AD with CHP followed by drying of digested sludge for solid fuel production, 5 – THP AD followed by drying, pyrolysis of the digested sludge and use of the both the biogas and the pyrolysis gas in a CHP.The economic and environmental Life Cycle Assessment (LCA) found that both the post AD drying options performed well but the option used to create a solid fuel to displace coal (configuration 4) was the most sustainable solution economically and environmentally, closely followed by the pyrolysis configuration (5). Application of THP improves the financial and environmental performance compared with conventional AD. Producing bio-methane for grid injection (configuration 3) is attractive financially but has the worst environmental impact of all the scenarios, suggesting that the current UK financial incentive policy for bio-methane is not driving best environmental practice. It is clear that new and improving processes and technologies are enabling significant opportunities for further energy recovery from sludge; LCA provides tools for determining the best overall options for particular situations and allows innovation resources and investment to be focused accordingly.     

Pilot‐scale demonstration of in situ capping of PCB‐containing sediments in the lower Grasse River

A fish‐consumption advisory is currently in effect in a seven‐mile stretch of the Grasse River in Massena, New York, due to elevated levels of PCBs in fish tissue. One remedial approach that is being evaluated to reduce the PCB levels in fish from the river is in situ capping. An in‐river pilot study was conducted in the summer of 2001 to assess the feasibility of capping PCB‐containing sediments of the river. The study consisted of the construction of a subaqueous cap in a seven‐acre portion of the river using various combinations of capping materials and placement techniques. Optimal results were achieved with a 1:1 sand/topsoil mix released from a clamshell bucket either just above or several feet below the water surface. A longer‐term monitoring program of the capped area commenced in 2002. Results of this monitoring indicated: 1) the in‐place cap has remained intact since installation; 2) no evidence of PCB migration into and through the cap; 3) groundwater advection through the cap is not an important PCB transport mechanism; and 4) macroinvertebrate colonization of the in‐place cap is continuing. Additional follow‐up monitoring in the spring of 2003 indicated that a significant portion of the cap and, in some cases, the underlying sediments had been disturbed in the period following the conclusion of the 2002 monitoring work. An analysis of river conditions in the spring of 2003 indicated that a significant ice jam had formed in the river directly over the capping pilot study area, and that the resulting increase in river velocities and turbulence in the area resulted in the movement of both cap materials and the underlying sediments. The pilot cap was not designed to address ice jam–related forces on the cap, as the occurrence of ice jams in this section of the river had not been known prior to the observations conducted in the spring of 2003. These findings will preclude implementation of the longer‐term monitoring program that had been envisioned for the pilot study. The data collected immediately after cap construction in 2001 and through the first year of monitoring in 2002 serve as the basis for the conclusions presented in this article. It should be recognized that, based on the observation made in the spring of 2003, some of these conclusions are no longer valid for the pilot study area.The occurrence of ice jams in the lower Grasse River and their importance on sediments and PCBs within the system are currently under investigation. © 2003 Wiley Periodicals, Inc.     

Characterization of the leaching behaviour of concrete mortars and of cement-stabilized wastes with different waste loading for long term environmental assessment

The leaching behaviour of cement-based products-both construction products and cement-stabilized wastes--have been shown to be similar after assessing the leaching characteristics by means of a pH dependence leaching test. This procedure is particularly suited to identifying the chemical speciation of materials. Geochemical modelling has shown a number of solubility controlling phases in this largely inorganic matrix, that can very well explain the observed leaching patterns as a function of pH. Understanding these relationships allows the prediction of leaching behaviour under other exposure conditions and to improve the ultimate quality of products, if so desired. The role of ettringite-type phases for the binding of oxyanions in the pH range above pH 12 has been identified before and confirmed in this work. The order of incorporation follows from the ratio between the maximum leachability at mildly alkaline pH and at high pH. Increased levels of sulfate negatively influence the binding of oxyanions in cement-stabilized waste through site competition.