Current status and future needs for biological and environmental reference materials certified for methylmercury compounds.

A good quality control/quality assurance programme should be implemented in all environmental or health related studies on mercury and its organic compounds, particularly, for monomethylmercury (MeHg) which is the most toxic mercury compound. This can be achieved initially by analysing suitable certified reference materials (CRMs), which are available from various producers such as the National Institute of Standards and Technology (NIST) from USA, National Institute of Environmental Studies (NIES), National Research Council of Canada (NRCC), Standards, Measurements and Testing programme (SM&T) of the European Commission, and the International Atomic Energy Agency (IAEA). It is well understood that these materials are not covering present needs, as most of them are of the marine origin, while many laboratories are conducting research and monitoring in terrestrial ecosystems and fresh water environment. In addition, CRMs for human exposure assessment, such as blood, urine, and hair at several levels of concentrations are still lacking. Therefore, many other actions should be undertaken to achieve, improve and/or maintain quality of data, including participation in interlaboratory studies, proficiency testing and production of laboratory reference materials. A review of these actions has shown that MeHg compounds determination in samples such as soil, sediment and water is rather difficult and the results are also method dependent. In addition, it has been shown that some of the most frequently employed analytical methods may be a subject to spurious MeHg formation in the presence of high concentrations of inorganic mercury and organic matter. These findings have put a number of previous data on MeHg in question and consequently prompt actions were undertaken by a number of well experienced laboratories and producers of CRMs. So far, it is shown that the results obtained by various laboratories using different analytical techniques agree well with certified values in all RMs certified for MeHg. This suggests that comparability of data can be achieved, which however is not a guarantee of the true values.     

Improved and Standardized Methodology for Oil Spill Fingerprinting

The existing Nordtest methodology for oil spill Identification has over the past 10 years formed an important "platform" for solving oil spill identification cases both in the Scandinavian countries as well as other countries in Europe, the USA and Canada. " Revision of the Nordtest Methodology for Oil Spill Identification " is a cooperative project between the National Oil Spill Identification laboratories in Norway, Sweden, Finland, Denmark and the Battelle Memorial Institute (Duxbury) in the USA. The goals of the project are: (1) to refine the existing Nordtest methodology into a technically more robust and defensible oil spill identification methodology with focus on determination of quantitative diagnostic indices (ratios) and (2) to adjust the revised Nordtest methodology into guidelines for the European Committee for Standardization (CEN). This paper presents the recommended methodology for the analytical oil spill identification part. The sampling techniques and handling of oil samples and background (reference) samples prior to their arrival at the environmental forensic laboratory is not covered in this paper. The recommended methodology approach is a result of documented analytical improvements and a more quantitative treatment of analytical data from gas chromatographic-flame ionization detector (GC/FID) and gas chromatographic-mass spectrometer methods (GC/MS-SIM) and the operational experiences over past few years among the participating forensic laboratories. The experience and literature in the field of oil exploration and production geochemistry have also played an important role for the recommended methodology. The results from a recent Round Robin test carried out among 12 laboratories using this new methodology are presented in a separate paper in this issue (Faksness et at ., 2002d).     

Improved and Standardized Methodology for Oil Spill Fingerprinting

The existing Nordtest methodology for oil spill Identification has over the past 10 years formed an important “platform” for solving oil spill identification cases both in the Scandinavian countries as well as other countries in Europe, the USA and Canada. “Revision of the Nordtest Methodology for Oil Spill Identification” is a cooperative project between the National Oil Spill Identification laboratories in Norway, Sweden, Finland, Denmark and the Battelle Memorial Institute (Duxbury) in the USA. The goals of the project are: (1) to refine the existing Nordtest methodology into a technically more robust and defensible oil spill identification methodology with focus on determination of quantitative diagnostic indices (ratios) and (2) to adjust the revised Nordtest methodology into guidelines for the European Committee for Standardization (CEN). This paper presents the recommended methodology for the analytical oil spill identification part. The sampling techniques and handling of oil samples and background (reference) samples prior to their arrival at the environmental forensic laboratory is not covered in this paper. The recommended methodology approach is a result of documented analytical improvements and a more quantitative treatment of analytical data from gas chromatographic-flame ionization detector (GC/FID) and gas chromatographic-mass spectrometer methods (GC/MS-SIM) and the operational experiences over past few years among the participating forensic laboratories. The experience and literature in the field of oil exploration and production geochemistry have also played an important role for the recommended methodology. The results from a recent Round Robin test carried out among 12 laboratories using this new methodology are presented in a separate paper in this issue (8).     

Short-term exposure to ozone altered the relative feed value of an alfalfa cultivar

Biomonitors are organisms that provide quantitative information on environmental quality. There are some constraints and limitations for the use of plants as biomonitors of soil pollution, as pointed out recently by some authors in this journal. However, we defend the use of plants as biomonitors, and argue that they have important advantages over soil analyses as indicators of soil quality, particularly when investigations are made on a large scale.     

The use of vegetation,bees, and snails as important tools for the biomonitoring of atmospheric pollution—a review

The continuous discharge of diverse chemical products in the environment is nowadays of great concern to the whole world as some of them persist in the environment leading to serious diseases. Several sampling techniques have been used for the characterization of this chemical pollution, although biomonitoring using natural samplers has recently become the technique of choice in this field due to its efficiency, specificity, and low cost. In fact, several living organisms known as biomonitors could accumulate the well-known persistent environmental pollutants allowing their monitoring in the environment. In this work, a review on environmental biomonitoring is presented. The main sampling techniques used for monitoring environmental pollutants are first reported, followed by an overview on well-known natural species used as passive samplers and known as biomonitors. These species include conifer needles, lichen, mosses, bees and their byproducts, and snails, and were widely used in recent research as reliable monitors for environmental pollution.

     

An overview of recent IAEA projects on mercury in non-marine environments

Nuclear and isotopic techniques are unique tools for studying mercury contamination and cycling in various environments. Therefore, the International Atomic Energy Agency (IAEA) has been supporting the use of nuclear and complementary analytical techniques (mainly neutron activation analysis, inductively coupled plasma – mass spectrometry and atomic absorption spectrometry), and application of radioactive and enriched stable isotopes in its member states since many years. The main mechanisms of support have been technical cooperation and coordinated research projects. Whilst the technical cooperation projects have helped in solving technical problems and providing know-how in the developing member states, the research projects have supported both basic and applied research. So far, participants from 18 IAEA member states have taken part in projects concerned with non-marine environments. In this paper, IAEA's supportive mechanisms are presented and the results of recently finished and on-going projects are discussed. As an important part of the IAEA activities, several interlaboratory comparison exercises were organised and reference materials characterised for both total and methylmercury issued.     

Determination of trace elements and evaluation of their enrichment factors in Himalayan lichens

Within the framework of the Ev-K2-CNR research program of the Italian National Research Council a specific task project has been initiated for the identification of trace elements in lichens in remote high altitude areas. This is to evaluate the possibility of using lichens as biomonitors of trace elements of atmospheric pollution. In this preliminary study, more than 20 elements have been determined in some species of lichens collected at different altitudes (from 1300 to 5000 m) in the region of the Sagarmatha National Park (Nepal). Samples of superficial soils were also collected and analyzed to calculate the trace element enrichment factors (EF) using scandium as a normalizing element. Most of the trace elements were determined by instrumental neutron activation analysis (INAA), while lead and cadmium measurements were carried out with electrothermal atomic absorption spectroscopy (ET-AAS). The EF values as well as the elemental concentrations are reported and discussed.     

Comparison of instrumental methods for chlorinated dibenzo-p-dioxin (CDD) determination - interim results of a round-robin study involving GC-MS, MS-MS, and high resolution MS

A study was designed to determine the feasibility of using GC-MS-MS techniques for the determination of chlorinated dibenzo-p-dioxins (CDD) and dibenzofurans (CDF) in difficult environmental samples with reduced cleanup. Three fish and three sediment extracts were provided to six different laboratories with GC-MS-MS capability for analysis. In addition, extracts were analysed by GC-low reduction MS (LRMS) and GC-high resolution MS (HRMS). At the time of this report, all participating GC-MS-MS laboratories had not completed their analysis of the supplied samples. All reporting laboratories found the analysis of these very complex samples difficult without extensive cleanup. GC-HRMS determination of some samples was possible with reduced cleanup compared to GC-LRMS.     

Damage to plants due to industrial pollution and their use as bioindicators in Egypt

Effects of industrial air pollution on growth parameters of clover and Egyptian mallow were examined at three locations in the industrial area of Shoubra Elkheima, north of Cairo. Symptoms of plant damage appeared in the form of chlorosis and necrotic patterns. The decrease in chlorophyll reached more than 60% in plants cultivated in the industrial region. Plant growth and dry weights were reduced by more than 50%. The reduction in chlorophyll and growth parameters was correlated with the concentrations of air pollutants measured in the atmosphere of the locations examined. Moreover, clover and Egyptian mallow plants cultivated in the region of Shoubra Elkheima accumulated lead and cadmium, which can pass into the human food chain. It is concluded that these plants can be used as biomonitors for industrial air pollution.     

Toxaphene in standard solutions and cleaned biota extracts--results of the first QUASIMEME interlaboratory studies. Quality Assurance of Information for Marine Environmental Monitoring in Europe

Two interlaboratory studies on individual toxaphene congeners have been organised by the project Quality Assurance of Information for Marine Environmental Monitoring in Europe (QUASIMEME). Fifteen laboratories analysed two standard solutions in the first study and 13 laboratories analysed a standard solution and two cleaned biota extracts in the second study. The coefficients of variation obtained for the standard solutions were 6-21% and for the cleaned extracts 16-39%. Although the results were comparable to those of other studies, further improvement in the level of agreement between the participating laboratories was considered possible.     

Spatial modeling of factor analysis scores

The use of mosses as biomonitors operates as an indicator of their concentration in the environment, becoming a methodology which provides a significant interpretation in terms of environmental quality. The different types of pollution are variables that can not be measured directly in the environment - latent variables. Therefore, we propose the use of factor analysis to estimate these variables in order to use them for spatial modelling. On the contrary, the main aim of the commonly used principal components analysis method is to explain the variability of observed variables and it does not permit to explicitly identify the different types of environmental contamination. We propose to model the concentration of each heavy metal as a linear combination of its main sources of pollution, similar to the case of multiple regression where these latent variables are identified as covariates, though these not being observed. Moreover, through the use of geostatistical methodologies, we suggest to obtain maps of predicted values for the different sources of pollution. With this, we summarize the information acquired from the concentration measurements of the various heavy metals, and make possible to easily determine the locations that suffer from a particular source of pollution.     

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study

The measurement of volatile organic compound (VOC) emissions from building products and materials by manufacturers and testing laboratories, and the use of the test results for labeling programs, continue to expand. One issue that hinders wide acceptance for chamber product testing is the lack of a reference material to validate test chamber performance. To meet this need, the National Institute of Standards and Technology (NIST) and Virginia Tech (VT) have developed a prototype reference material that emits a single VOC similar to the emissions of a diffusion-controlled building product source with a dynamic emissions profile. The prototype material has undergone extensive testing at NIST and a pilot interlaboratory study (ILS) with four laboratories. The next development step is an evaluation of the prototype source in multiple-sized chambers of 14 laboratories in seven countries. Each laboratory was provided duplicate specimens and a test protocol. Study results identified significant issues related to the need to store the source at a subzero Celsius temperature until tested and possible inconsistencies in large chambers. For laboratories using a small chamber and meeting all the test method criteria, the results were very encouraging with relative standard deviations ranging from 5% to 10% across the laboratories.

Implications: Currently, the chamber performance of laboratories conducting product VOC emissions testing is assessed through interlaboratory studies (ILS) using a source with an unknown emission rate. As a result, laboratory proficiency can only be based on the mean and standard deviation of emission rates measured by the participating ILS laboratories. A reference material with a known emission rate has the potential to provide an independent assessment of laboratory performance as well as improve the quality of interlaboratory studies. Several international laboratories with different chamber testing systems demonstrated the ability to measure the emission rate of such a reference material within an acceptable measurement uncertainty.     

Identifying women’s attitudes and barriers to participating in a proposed community-based conservation group in western Belize

With mounting research showing the many benefits of having women involved in community-based conservation (CBC) efforts, we wanted to identify and measure the attitudes and barriers to women participating in a CBC program in western Belize. We surveyed 500 women in communities surrounding the Vaca Forest Reserve to measure their interest in, attitudes toward, and possible barriers to participating in a CBC program. We assessed women’s intent to participate in CBC activities using the Theory of Planned Behavior to identify the attitudinal, normative, and behavioral control constructs that best predict their intentions to participate. Women indicated positive attitudes toward participating in a CBC program, while perceived behavioral controls had the largest influence on their intent to participate. Understanding the importance of and influence of these constructs on women’s participation will help us and other conservation scientists work with women to collaboratively design effective conservation programs.     

Inter-laboratory study to improve the quality of the analysis of nutrients in rainwater chemistry

This paper describes the results of an inter-laboratory study conducted for the analysis of nutrients (nitrate, ammonium, phosphate, total nitrogen (TN), and total phosphorus (TP)) in natural rainwater. For this purpose, rainwater samples were collected and aggregated in Singapore and homogenized. These samples were immediately filtered through 0.45 μm membrane filters and autoclaved for 15 min at 80 °C in order to stabilize the nutrients. The homogeneity and the stability of nutrients were rigorously tested for a period of three months initially. Upon ensuring the homogeneity and stability, the samples were distributed to 15 different laboratories from various countries around the world (Australia, Brazil, India, Mauritius, Singapore, Slovenia, Spain, Taiwan, and USA). Almost all laboratories have reported the analytical results for nitrate whereas only 8 of the 15 laboratories reported results for other nutrients such as ammonium, phosphate, TN, and TP. The discrepancy was mainly due to the presence of these nutrients in low concentration levels (particularly ammonium ion and phosphate). Not all the laboratories were equipped with analytical capabilities to conduct the analysis of nutrients in low concentration levels. Further, the uncertainty associated with the analysis of TN and TP restricted the number of laboratories that could report their analytical data on nutrients. All 14 laboratories reported nitrate-nitrogen results which were in good agreement with each other (0.68 ± 0.07 mg l^?1). Similarly, the results of TN and TP were also comparable among at least 8 laboratories. This inter-laboratory study on the analysis of nutrients in natural rainwater, conducted for the first time, provided an opportunity to the participating laboratories to assess and improve their laboratory performance, thereby, improving the quality of their analytical data.     

Effects of Heavy metals on plants and resistance mechanisms

GOAL, SCOPE AND BACKGROUND: As one of the consequences of heavy metal pollution in soil, water and air, plants are contaminated by heavy metals in some parts of China. To understand the effects of heavy metals upon plants and the resistance mechanisms, would make it possible to use plants for cleaning and remediating heavy metal-polluted sites. METHODS: The research results on the effects of heavy metals on plants and resistant mechanisms are compiled from Chinese publications from scientific journals and university journals, mostly published during the last decade. RESULTS AND DISCUSSION: Effects of heavy metals on plants result in growth inhibition, structure damage, a decline of physiological and biochemical activities as well as of the function of plants. The effects and bioavailability of heavy metals depend on many factors, such as environmental conditions, pH, species of element, organic substances of the media and fertilization, plant species. But, there are also studies on plant resistance mechanisms to protect plants against the toxic effects of heavy metals such as combining heavy metals by proteins and expressing of detoxifying enzyme and nucleic acid, these mechanisms are integrated to protect the plants against injury by heavy metals. CONCLUSIONS: There are two aspects on the interaction of plants and heavy metals. On one hand, heavy metals show negative effects on plants. On the other hand, plants have their own resistance mechanisms against toxic effects and for detoxifying heavy metal pollution. RECOMMENDATIONS AND OUTLOOK: To study the effects of heavy metals on plants and mechanisms of resistance, one must select crop cultivars and/or plants for removing heavy metals from soil and water. More highly resistant plants can be selected especially for a remediation of the pollution site. The molecular mechanisms of resistance of plants to heavy metals should be studied further to develop the actual resistance of these plants to heavy metals. Understanding the bioavailability of heavy metals is advantageous for plant cultivation and phytoremediation. Decrease in the bioavailability to farmlands would reduce the accumulation of heavy metals in food. Alternatively, one could increase the bioavailability of plants to extract more heavy metals.     

Differential accumulation of mercury and other trace metals in the food web components of a reservoir impacted by a chlor-alkali plant (Flix, Ebro River, Spain): Implications for biomonitoring

Comparative studies of biomonitors of trace metal contamination are relatively scarce. We took advantage of a point source pollution in a reservoir (Flix, Spain) to compare trace metal (Hg, Pb, Cd, Se, As, Zn, Cu, Cr) bioaccumulation patterns among 16 food web components. Our results indicate that most organisms are suitable for Hg biomonitoring, whereas other metals are better monitored by only some of them. Biofilms and zebra mussel were the organisms with larger and more diverse biomonitoring capacity. However, we show that using groups of biomonitors increase the scope and strengths of the conclusions and specific goals can be better addressed. We conclude providing an overview of the strengths and weaknesses of the main organisms considered for biomonitoring trace metals in rivers and reservoirs.     

Inter-laboratory exercise on steroid estrogens in aqueous samples

An inter-laboratory comparison exercise was organized among European laboratories, under the aegis of EU COST Action 636: “Xenobiotics in Urban Water Cycle”. The objective was to evaluate the performance of testing laboratories determining “Endocrine Disrupting Compounds” (EDC) in various aqueous matrices. As the main task three steroid estrogens: 17α-ethinylestradiol, 17β-estradiol and estrone were determined in four spiked aqueous matrices: tap water, river water and wastewater treatment plant influent and effluent using GC-MS and LC-MS/MS. Results were compared and discussed according to the analytical techniques applied, the accuracy and reproducibility of the analytical methods and the nature of the sample matrices. Overall, the results obtained in this inter-laboratory exercise reveal a high level of competence among the participating laboratories for the detection of steroid estrogens in water samples indicating that GC-MS as well as LC-MS/MS can equally be employed for the analysis of natural and synthetic hormones.     

Rapid determination of residues of pesticides in honey by µGC-ECD and GC-MS/MS: Method validation and estimation of measurement uncertainty according to document No. SANCO/12571/2013

A simple and straightforward method for simultaneous determination of residues of 13 pesticides in honey samples (acrinathrin, bifenthrin, bromopropylate, cyhalothrin-lambda, cypermethrin, chlorfenvinphos, chlorpyrifos, coumaphos, deltamethrin, fluvalinate-tau, malathion, permethrin and tetradifon) from different pesticide classes has been developed and validated. The analytical method provides dissolution of honey in water and an extraction of pesticide residues by n-Hexane followed by clean-up on a Florisil SPE column. The extract was evaporated and taken up by a solution of an injection internal standard (I-IS), ethion, and finally analyzed by capillary gas chromatography with electron capture detection (GC-µECD). Identification for qualitative purpose was conducted by gas chromatography with triple quadrupole mass spectrometer (GC-MS/MS). A matrix-matched calibration curve was performed for quantitative purposes by plotting the area ratio (analyte/I-IS) against concentration using a GC-µECD instrument. According to document No. SANCO/12571/2013, the method was validated by testing the following parameters: linearity, matrix effect, specificity, precision, trueness (bias) and measurement uncertainty. The analytical process was validated analyzing blank honey samples spiked at levels equal to and greater than 0.010 mg/kg (limit of quantification). All parameters were satisfactorily compared with the values established by document No. SANCO/12571/2013. The analytical performance was verified by participating in eight multi-residue proficiency tests organized by BIPEA, obtaining satisfactory z-scores in all 70 determinations. Measurement uncertainty was estimated according to the top-down approaches described in Appendix C of the SANCO document using the within-laboratory reproducibility relative standard deviation combined with laboratory bias using the proficiency test data.     

Uncertainty estimation in the analysis of pesticide residues in olive oil using data from proficiency tests

In this work we report the results for estimating the measurement uncertainty (MU) following up the application of two different approaches, relatively the top-down procedure, by using proficiency test data. We have focused the estimation on the olive oil matrix. We used the analytical data obtained from five selected editions of the Proficiency Tests (PTs, from 2007 to 2011) on pesticide residues in olive oil to estimate the MU. These PTs have been organized by Istituto Superiore di Sanità annually in cooperation with International Olive Council (IOC) since 1997. The number of participants in each trial ranged from 10 to 43. We used a total of 34 pesticide results. The expanded uncertainty U _(c) was calculated using a covering factor k = 2 for a confidence interval of 95%. In the approach 1, the within–laboratory reproducibility standard deviation is combined with estimates of the method and laboratory bias using PTs data. In the approach 2, the way of estimating the MU is based only on the bias that the laboratory has obtained participating in a sufficient number of the IOC proficiency tests. Comparing the relative expanded uncertainty based on these different approaches we notice values quite constant and close, from 42% to 48%. Moreover, these calculated expanded uncertainties are less than the default value of 50% (corresponding to a 95% confidence level), adopted from European guidance document SANCO based on the fit-for-purpose relative standard deviation (FFP-RSD).     

Calibration of lichen transplants considering faint memory effects

Biomonitoring, among other purposes, can be used as a tool to study the dispersion of trace elements through the atmosphere and back to the earth's surface again. In this sense it has been used for more than 20 years now. Yet, the calibration of biomonitors elemental contents against other atmospheric element dispersion variables like deposition or airborne concentration is still an open subject. The knowledge of a calibration nevertheless represents a qualitative improvement upon the use of biomonitors. Biomonitors elemental contents are usually assumed to depend in a linear way on the average values of atmospheric element dispersion variables, thus a linear regression is assumed to provide a good calibration. In this work: the element dispersion variables like deposition or airborne concentration will be referred in general as availability variables due to reasons that will be clarified; an uptake experiment using transplants of lichen Parmelia sulcata carried out in Portugal during a 2-year period (1994/1996) is described; and new concepts and calibration methods are presented. Lichen and aerosol samples were analysed by nuclear analytical techniques PIXE and INAA, and total deposition dry residue samples were analysed by ICP-MS. A database of roughly 70,000 values was thus created and biomonitor calibration carried out considering that biomonitors are not mechanical instruments but that they rather describe their exposure with a non-perfect memory. Data shows that surveying lichens four times within 1 year, with a period of 3 months in between sampling campaigns, allows the recovery of availability mean, maxima and standard deviation for many elements.