Photodegradation of bisphenol Z by UV irradiation in the presence of beta-cyclodextrin

In this work, the formation of the inclusion complex of bisphenol Z (1,1-bis(4-hydroxyphenyl)cyclohexane, abbreviated as BPCH) with beta-cyclodextrin (beta-CD) has been studied, 1:1 inclusion complex can be obtained, the formation constant of the beta-CD/BPCH complex is 5.94x10(3)M(-1). The photodegradation behavior of BPCH was investigated under monochromatic UV irradiation (lambda=254 nm). The photodegradation rate constant of BPCH in aqueous solutions with beta-CD showed a 9.0-fold increase, and simultaneously the mineralization of BPCH can be enhanced by beta-CD. The influence factors on photodegradation of BPCH were also studied and described in details, such as concentration of beta-CD, initial concentration of BPCH, organic solvent and pH. The photodegradation of BPCH in the presence of beta-CD includes the direct photolysis and the photooxidation of BPCH during the photochemical process. Some predominant photodegradation products are 4-(2,4,5-trihydroxy-phenyl)-4-(4-hydroxyphenyl) butanoic acid, 5,5-bis(4-hydroxyphenyl)pentanoic acid, meta-hydroxylated BPCH, ortho-hydroxylated BPCH and 4-(1-(4-hydroxyphenyl)pentyl)phenol respectively. The enhancement of photodegradation of BPCH mainly results from moderate inclusion depth of BPCH molecule in the beta-CD cavity. This kind of inclusion structure allows BPCH molecule sufficient proximity to secondary hydroxyl groups of the beta-CD cavity, and these hydroxyl groups could be activated and converted to hydroxyl radicals under UV irradiation, which can enhance the photooxidation of BPCH.     

Leaching of 2,4-D from a soil in the presence of beta-cyclodextrin: laboratory columns experiments

This study reports on the effect of the presence of beta-cyclodextrin (beta-CD) on the adsorption and mobility of the pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) through soil columns. The previous application of beta-CD to the soil produced a retarded leaching of 2,4-D through the soil column, due probably to herbicide adsorption on the soil through beta-CD adsorbed. However, the application of beta-CD solution to the soil column where 2,4-D had been previously adsorbed, led to the complete desorption of the herbicide, due to the formation of water-soluble 1:1 inclusion complexes between 2,4-D and beta-CD. Beta-CD can be viewed as a microscopic organic-phase extractant. It can be an advantage to remove from soil pesticides which are able to form inclusion complexes with cyclodextrins, making them possible candidates for use in in situ remediation efforts.     

Measurement of odor intensity by an electronic nose

The possibility of using electronic noses (ENs) to measure odor intensity was investigated in this study. Two commercially available ENs, an Aromascan A32S with conducting polymer sensors and an Alpha M.O.S. Fox 3000 with metal oxide sensors, as well as an experimental EN made of Taguchi-type tin oxide sensors, were used in the experiments. Odor intensity measurement by sensory analysis and EN sensor response were obtained for samples of odorous compounds (n-butanol, CH3COCH3, and C2H5SH) and for binary mixtures of odorous compounds (n-butanol and CH3COCH3). Linear regression analysis and artificial neural networks (ANN) were used to establish a relationship between odor intensity and EN sensor responses. The results, suggest that large differences in sensor response to samples of equivalent odor intensity exist and that sensitivity to odorous compounds varies according to the type of sensors. A linear relationship between odor intensity and averaged sensor response was found to be appropriate for the EN based on conducting polymer sensors with a correlation coefficient (r) of 0.94 between calculated and measured odor intensity. However, the linear regression approach was shown to be inadequate for both ENs, which included metal oxide-type sensors. Very strong correlation (r = 0.99) between measured odor intensity and calculated odor intensity using the ANN developed were obtained for both commercial ENs. A weaker correlation (r = 0.84) was found for the experimental instrument, suggesting an insufficient number of sensors and/or not enough diversity in sensor responses. The results demonstrated the ability of ENs to measure odor intensity associated with simple mixtures of odorous compounds and suggest that ANN are appropriate to model the relationship between odor intensity measurement and EN sensor response.     

Influence of toxicity and dissipation of racemic fenoxaprop and its R-enantiomer in Scenedesmus obliquus suspension by cyclodextrins

Cyclodextrins (CDs), a class of cyclic oligosaccharide molecules containing a variety of chiral centre, are capable of recognizing enantiomeric molecules through the formation of inclusion complexes. In this work, we selected three types of CDs, beta-CD and its two derivatives, randomly methylated beta-CD (RAMEB) and hydroxypropyl beta-CD (HP-beta-CD), to evaluate effects on toxicity of racemic fenoxaprop (rac-FA) and its R-enantiomer (R-FA) to freshwater alga Scenedesmus obliquus (S. obliquus) and their dissipation in S. obliquus suspension with and without CDs addition, respectively, in an attempt to get more detail about enantioselective behavior of fenoxaprop acid (FA) in the environment, using CDs as a remediation agent for FA and formulation additive for fenoxaprop-p-ethyl (FE). The significant difference between rac-FA and R-FA was not observed in their acute toxicity to S. obliquus and dissipation in S. obliquus suspension. RAMEB had no effect on either toxicity of FA to S. obliquus or dissipation of FA in S. obliquus suspension, and it also didn't change the extent of enantioselectivity in toxicity of FA to S. obliquus. But the addition of a certain amount of beta -CD and HP-beta -CD reduced the toxicity of FA to S. obliquus and increased dissipation of FA in S. obliquus suspension, as well as changed the enantioselectivity in toxicity of FA to S. obliquus. The results indicated beta-CD and HP-beta-CD could be used as a promising agent for remediation of aquatic contamination produced by FA, and RAMEB might be used as potential formulation additives for FE, the parent compound of FA, as RAMEB didn't decrease activity of R-FA and might be environmentally safer than the conventional additives.     

Cyclodextrins: a new efficient absorbent to treat waste gas streams

Volatile Organic Compounds (VOCs) in the air provoke health and environmental concerns. This paper focuses on the absorption method to treat industrial polluted air loaded with VOCs. The key variable of this treatment being the choice of a suitable liquid absorbent, the aim of this research work is to investigate the effectiveness and the regeneration of a new potential family of absorbent: cyclodextrins (CDs). All CDs derivatives tested are able to decrease the Henry's law constant of toluene: a reduction of volatility up to 95% may be obtained, depending on CD nature and concentration. Moreover, absorption experiments show that beta-CD, which presents the highest absorption ability, is 250 time more efficient than water. The absorption efficiency is not totally correlated with static experiments, suggesting that, in addition to Henry's law constants and inclusion compounds stability, toluene diffusion into such solutions has to be taken into account. It is also to be noted that salt and pH variations seem to have little influence on the absorption capacity of CDs, which may be of great interest for industrial applications. Finally, since production of solid compounds was not observed during these experiments and since temperature decreases the capture ability in a drastic way, regeneration of the washing solution can be achieved by heating the solution in combination with air stripping.     

Use of lees materials as an adsorbent for removal of organochlorine compounds or benzene from wastewater

Lees materials such as wheat bran, rapeseed, linseed, okara (lees of bean curd), and sakekasu (sake lees) were found to effectively adsorb organochlorine compounds. The amounts of these compounds such as chloroform, dichloromethane, and benzene adsorbed were plotted against the equilibrium concentration of substances in solution on a logarithmic scale. A linear relationship was obtained, indicating that the adsorption reactions were of the Freundlich type. When the lees materials were applied to wastewater (pH: 10) containing 0.1 g/l of dichloromethane, dichloromethane was removed from the wastewater in the range of 70-90% efficiency after 90 min. There was a high correlation between the removal efficiency and the number of spherosomes, which are intracellular particles attributed to the uptake of organochlorine compounds.     

Measurement of Odor Intensity by an Electronic Nose

ABSTRACT

The possibility of using electronic noses (ENs) to measure odor intensity was investigated in this study. Two commercially available ENs, an Aromascan A32S with conducting polymer sensors and an Alpha M.O.S. Fox 3000 with metal oxide sensors, as well as an experimental EN made of Taguchi-type tin oxide sensors, were used in the experiments. Odor intensity measurement by sensory analysis and EN sensor response were obtained for samples of odorous compounds (n-butanol, CH₃COCH₃, and C₂H₅SH) and for binary mixtures of odorous compounds (n-butanol and CH₃COCH₃). Linear regression analysis and artificial neural networks (ANN) were used to establish a relationship between odor intensity and EN sensor responses.

The results suggest that large differences in sensor response to samples of equivalent odor intensity exist and that sensitivity to odorous compounds varies according to the type of sensors. A linear relationship between odor intensity and averaged sensor response was found to be appropriate for the EN based on conducting polymer sensors with a correlation coefficient (r) of 0.94 between calculated and measured odor intensity. However, the linear regression approach was shown to be inadequate for both ENs, which included metal oxide-type sensors. Very strong correlation (r = 0.99) between measured odor intensity and calculated odor intensity using the ANN developed were obtained for both commercial ENs. A weaker correlation (r = 0.84) was found for the experimental instrument, suggesting an insufficient number of sensors and/or not enough diversity in sensor responses. The results demonstrated the ability of ENs to measure odor intensity associated with simple mixtures of odorous compounds and suggest that ANN are appropriate to model the relationship between odor intensity measurement and EN sensor response.     

Degradation of para-hydroxybenzoic acid by means of mixed microbial cultures

Olive mill wastewater contains some phenolic compounds that cause antibacterial activity of a kind that prevents biological treatment without previous dilution. Among these phenolic compounds, p-hydroxybenzoic acid (PHB) is considered to be one of the most representative. This work examines the biodegradation of PHB by aerobic microbial mixed cultures previously acclimatized to glucose, which was used as an easily biodegradable model compound. Microbial growth runs were carried out in a batch reactor in the PHB concentration range of 200-1000 mg/L. In all the runs the PHB proved to be completely degradable. The specific growth rates obtained were in the range of 0.16-0.35 l/h. Experimental runs showed that the functional relationship between the specific growth rate and PHB concentration was that proposed by Monod. The kinetic constants of the Monod equation (mu(max) and K(S)) and biomass yield coefficient (Y) were determined experimentally. With the parameter values thus obtained, a mathematical model that also takes account of the duration of the lag phase was employed to describe both the microbial growth and the consumption of PHB. The concentration values of the model fit well with the data obtained experimentally.     

Regression method of the hydrophobicity ruler approach for determining octanol/water partition coefficients of very hydrophobic compounds

A regression method was developed for the hydrophobicity ruler approach, which is an indirect method for determining the octanol/water partition coefficients of very hydrophobic compounds. Two constants introduced into the mathematical model were obtained by regression of the absorption data sampled before the partition equilibrium. A water miscible organic solvent was used to increase the solubility of the very hydrophobic compounds in the aqueous solution so that the hydrophobicity scale was reduced and the equilibration was accelerated. Polydimethylsiloxane/methanol aqueous solution and a series of 21 polychlorinated biphenyls (PCBs) were used to demonstrate the regression method. The PCB compounds with known experimental logK(o/w) values served as reference compounds, while the PCB compounds without known logK(o/w) values were determined. The distribution coefficients (logK(p/s)), uptake and elimination rate constants were obtained from the two regression constants for each compound (reference or unknown). The correlation of the logK(p/s) values of the reference PCB compounds with their logK(o/w) values was linear (logK(o/w)=2.69logK(p/s)+0.76, R(2)=0.97). The logK(o/w) values were compared with literature values and suggested that some values from the literature far off the calibration line could be inaccurate. The critical experimental factors, the merits of the regression method were discussed.     

Insights into the structure of urea-like compounds as inhibitors of the juvenile hormone epoxide hydrolase (JHEH) of the tobacco hornworm Manduca sexta: analysis of the binding modes and structure-activity relationships of the inhibitors by docking and CoMFA calculations

Substituted urea compounds are well-known as potent inhibitors of juvenile hormone epoxide hydrolase (JHEH) of the tobacco hornworm Manduca sexta. Docking simulations of 47 derivatives inside JHEH were performed to gain insight into the structural characteristics of these complexes. The obtained orientations show a strong similitude with the observed in the known X-ray crystal structures of human soluble epoxide hydrolase (sEH) complexed with dialkylurea inhibitors. In addition, the predicted inhibitor concentration (IC₅₀) of the above-mentioned compounds as JHEH inhibitors were obtained by a quantitative structure-activity relationship (QSAR) method by using comparative molecular field analysis (CoMFA) applied to aligned dataset. The best models included steric and electrostatic fields and had adequate predictive abilities. In addition, these models were used to predict the activity of an external test set of compounds that was not used for building the model. Furthermore, plots of the CoMFA fields allowed conclusions to be drawn for the choice of suitable inhibitors.     

Prediction of octanol--air partition coefficients of semivolatile organic compounds based on molecular connectivity index

A new method has been developed to describe the quantitative relationship between the octanol-air partition coefficients and molecular connectivity indexes of semivolatile organic compounds such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated naphthalenes (PCNs), polycyclic aromatic hydrocarbons (PAHs), chlorobenzenes (CBs), polybrominated diphenyl ethers (PBDEs). The stepwise multiple linear regression was used to derive six equations with correlation coefficients greater than 0.99 except for PBDEs' (0.96). The largest relative error is 4.6%, and the standard deviation is less than 1.83 log units. Compared with the data obtained from the relevant experiments, the results of prediction are very accurate.     

Polycyclic aromatic hydrocarbons in the surface soils from outskirts of Beijing, China

Surface soils from the outskirts of Beijing were analyzed for 16 priority polycyclic aromatic hydrocarbons (PAHs) using gas chromatography and mass spectrometry (GC-MS). The distribution map of total PAHs content was obtained as a contour plot. The concentration range of 16 PAHs varied by over two orders of magnitude from 0.016 microg g-1 in rural to 3.884 microg g-1 in suburban soils with the relatively standard deviation of 70.5%, showing large differences in the extent of PAHs pollution at the various sampling sites. It was notable that the concentration of BaP was 0.005-0.270 microg g-1 with a mean of 0.055 microg g-1. In general, the distribution of PAHs centered on the high molecular weight PAHs known to be carcinogenic. The 4-6 ring PAHs represented about 66% in rural samples and 70% in suburban soils of the total PAHs found. There was relatively good relationship among most of the individual PAHs and the compounds of Pyr, BaA, Flu, BbF, BaP, Chr and Ph gave strong correlation (r>0.8) with the sum of PAHs. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (Ph/An vs Flu/Pyr; summation operator COMB/ summation operator EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in Beijing outskirts soils.     

Semivolatile and volatile compounds in combustion of polyethylene

The evolution of semivolatile and volatile compounds in the combustion of polyethylene (PE) was studied at different operating conditions in a horizontal quartz reactor. Four combustion runs at 500 and 850 degrees C with two different sample mass/air flow ratios and two pyrolytic runs at the same temperatures were carried out. Thermal behavior of different compounds was analyzed and the data obtained were compared with those of literature. It was observed that alpha,omega-olefins, alpha-olefins and n-paraffins were formed from the pyrolytic decomposition at low temperatures. On the other hand, oxygenated compounds such as aldehydes were also formed in the presence of oxygen. High yields were obtained of carbon oxides and light hydrocarbons, too. At high temperatures, the formation of polycyclic aromatic hydrocarbons (PAHs) took place. These compounds are harmful and their presence in the combustion processes is related with the evolution of pyrolytic puffs inside the combustion chamber with a poor mixture of semivolatile compounds evolved with oxygen. Altogether, the yields of more than 200 compounds were determined. The collection of the semivolatile compounds was carried out with XAD-2 adsorbent and were analyzed by GC-MS, whereas volatile compounds and gases were collected in a Tedlar bag and analyzed by GC with thermal conductivity and flame ionization detectors.     

Partial solubility parameters of chlorobenzene and chlorophenol compounds at equilibrium distribution in two immiscible phases

Partial solubility parameters of chlorobenzene and chlorophenol compounds at equilibrium distribution in two immiscible phases such as soil-water system were studied. An integral distribution equilibrium equation is derived from the concept of partial solubility parameters and Flory-Hungins equation. Twelve chlorobenzenes and nineteen chlorophenols were employed in this study and their partial solubility parameters including dispersion( (δ_d),and polar van der Waals (δ_p), as well as their electron acceptor and donor solubility parameters (δ_a and δ_b) were calculated.Hildebrand's solubility parameter(δ) of the compounds was also obtained by using boiling point and formula.HPLC was performed by octadecyl-bonded phase as the stationary phase with methanol or acetonitrile as the mobile phase to determine the capacity factor k′ of all compounds for the calculation of δ_a and δ_b.     

Determination of hydrocarbons in old creosote contaminated soil using headspace solid phase microextraction and GC-MS.

Headspace solid phase microextraction (HS-SPME) has been used together with GC-MS to analyze organic substances directly in a soil, heavily contaminated with PAHs/creosote (approximately 300 mg/kg soil), from an old gaswork site in Stockholm, Sweden. The HS-SPME results, both qualitative and quantitative, were compared with traditional liquid extraction using ethyl acetate/hexane (20:80). It was shown that the concentrations determined with HS-SPME at 60 degrees C correlated well, for compounds containing up to two and three aromatic rings (naphthalenes, acenaphthene, acenaphthylene and fluorenes, while a lower concentration was obtained for phenanthrene, anthracene, fluoranthene and pyrene. The total concentrations for each compound determined with HS-SPME ranged from 2 to 25 microg/g soil. Quantification was done using standard addition of compounds directly to the soil samples. The bioavailable fraction of the compounds in the contaminated soil at 20 degrees C was analyzed using external calibration by spiking sterile uncontaminated sand (same texture and particle size as the contaminated soil but without a heavily sorbed organic fraction) with hydrocarbon standards in different concentrations. Storage of exposed fibers at 20 degrees C showed that analysis should be done within two days to make qualitative measurements and earlier (as soon as possible) for quantitative determinations.     

Structure-activity relationships and response-surface analysis of nitroaromatics toxicity to the yeast (Saccharomyces cerevisiae)

Inhibition of growth of the yeast Saccharomyces cerevisiae (Cmiz, the minimum concentration that produced a clear inhibition zone within 12 h) for 24 nitroaromatic compounds was investigated and a quantitative structure-activity relationship (QSAR) developed based on hydrophobicity expressed as the l-octanol/water partition coefficient in logarithm form, log K(ow), electrophilicity based on the energy of the lowest unoccupied orbital (E(lumo)). All nitrobenzene derivatives exhibited enhanced reactive toxicity than baseline. The toxicities of mono-nitrobenzenes and di-nitrobenzenes were elicited by different mechanisms of toxic action. For mono-nitro-derivatives, both significant log K(ow) based and strong E(lumo)-dependent relationships were observed indicating that their toxicities were affected both by the penetration process and the interaction with target sites of interaction. The toxicities of di-nitrobenzenes were greater than mono-nitrobenzenes and no log K(ow)-dependent but highly significant E(lumo)-based relationship was obtained. This suggests that toxicity of di-nitrobenzenes was highly electrophilic and involved mainly their in vivo electrophilic interaction with biomacromolecules. In an effort to model the elevated toxicity of all nitrobenzenes, a response-surface analysis was performed and this resulted in a highly predictive two-variable QSAR without reference to their exact mechanisms (Cmiz = 0.41 log K(ow) - 0.89 E(lumo) - 0.46, r2 = 0.87, Q2 = 0.86, n = 24).     

Emission characteristics of PCDD/Fs, PCBs, chlorobenzenes, chlorophenols, and PAHs from polyvinylchloride combustion at various temperatures

The effect of temperature on polyvinylchloride (PVC) combustion using a downstream tubular furnace was investigated for the formation of polycylcic aromatic hydrocarbons (PAHs) and chlorinated compounds. As the temperature increased, higher levels of PAHs were generated. Chlorinated compounds reached a peak at 600 degrees C, with low emissions recorded at 300 and 900 degrees C. There was a close correlation (R2 = 0.97) among polychlorinated biphenyls (PCBs), hexachlorobenzene, pentachlorobenzene, and polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). PAHs at all temperatures were analyzed in the gas phase. PCDD/Fs and PCBs were emitted as a solid phase at 300 and 600 degrees C and as a gas phase at 900 degrees C. For some PAHs, chlorobenzenes, and PCDD/Fs, a mathematical equation between the gas and solid phase and the reciprocal temperature in semilog proportion was derived. The proposed equation, which is log (amount in gas phase/amount in solid phase) = -A/T + B, where T is the temperature of the furnace and A and B are constants, for these species relating their gas/solid distributions showed a good relationship.