Mechanism of Microbial Degradation of Slow-Release Fertilizers

Methyleneureas are condensation products of urea and formaldehyde of different molecular mass and solubility; they are used in large amounts both as resins, binders, and insulating materials for industrial applications, as well as a slow-release nitrogen fertilizer for greens, lawns, or in bioremediation processes. In the present study, the microbial breakdown of these products was investigated. The nitrogen was released as ammonia and urea, and the formaldehyde released immediately oxidized via formiate to carbon dioxide. The enzymatic mechanism of metabolization of methyleneureas was studied in microorganisms isolated from soil, which were able to use these compounds as the sole source of nitrogen for growth. A strain of the Gram-negative bacterium Ralstonia paucula (formerly Alcaligenes sp. CDC group IVc-2) completely degraded methylenediurea and dimethylenetriurea to urea, ammonia, formaldehyde, and carbon dioxide. The enzyme initiating this degradation (methylenediurease) was purified and turned out to be different from the previously described enzyme from Ochrobactrum anthropi with regard to its regulation of expression and physicobiochemical properties. Fungal degradation of methyleneureas may occur via the formation of organic acids, thus leading to a nonenzymatic degradation of methyleneureas, which are unstable under acidic conditions.     

Abiotic Hydrolysis of Some Poly-D-glucaramides and Subsequent Microbial Utilization/Degradation

Carbohydrate acid amides, diamides and polyamides have been proposed to be utilized as nitrogen plant fertilizers or fertilizer components, and experiments with Brassica rapa demonstrated a positive biological response when these compounds were used as the only source of fixed nitrogen for plant growth. The present study was carried out with the aim of elucidating the mechanism of degradation of these polymers in both soil/compost and in liquid media and the role of microorganisms in this process. The results obtained suggest that a major route of degradation of polyglucaramides in the environment is their abiotic hydrolysis/release of the diacid and diamine building block units of these polymers, which are then utilized for growth by microorganisms. In cell-free crude extracts from enrichment cultures obtained with different poly-D-glucaramides, no enzyme activities catalyzing the release of diamines from these compounds were detected.     

Biodegradation of Slow-Release Fertilizers (Methyleneureas) in Soil

The biodegradation of urea and condensation products thereof (ureaforms or methyleneureas), their nitrification, and their influence on the respiratory rate of soil was studied over periods of up to 100 days. The total methyleneurea content of the soil was determined after its acidic extraction, using a convenient colorimetric assay, and an HPLC protocol was established to analyze for specific components of methyleneureas. Urea, unfractionated methyleneureas, and hot-water soluble methyleneureas were rapidly metabolized to ammonium, which accumulated to high concentrations and was consequently oxidized to nitrate; an accumulation of nitrite was observed during urea but not during methyleneurea degradation. Hot water-insoluble methyleneureas were degraded much more slowly, and ammonium formed from these compounds was oxidized to nitrate without being released in significant amounts. These results suggest that the use of methyleneureas of optimized composition with regard to their water solubility may help to resolve problems such as the toxicity of ammonia to plant growth as well as nitrogen loss by leaching of nitrate, denitrification and volatilization.     

Factors affecting polycyclic aromatic hydrocarbon biodegradation by Aspergillus flavus

This study investigated the ability of fungi isolated from highly contaminated soil to biodegrade polycyclic aromatic hydrocarbon (PAH) compounds, as well as the effect of several parameters on the biodegradation ability of these fungi. The isolated fungi were identified using ITS rDNA sequencing and tested using 2,6‐dichlorophinolendophenol to determine their preliminary ability to degrade crude oil. The top‐performing fungi, Aspergillus flavus and Aspergillus fumigatus, were selected to test their ability to biodegrade PAH compounds as single isolates. After 15 days of incubation, A. flavus degraded 82.7% of the total PAH compounds, with the complete degradation of six compounds, whereas A. fumigatus degraded 68.9% of the total PAHs, with four aromatic compounds completely degraded. We also tested whether different temperatures, pH, and nitrogen sources influenced the growth of A. flavus and the degradation rate. The degradation process was optimal at a temperature of 30°C, pH of 5.5, and with nitrogen in the form of yeast extract. Finally, the ability of the fungal candidate, A. flavus, to degrade PAH compounds under these optimum conditions was studied. The results showed that 95.87% of the total PAHs, including 11 aromatic compounds, were completely degraded after 15 days of incubation. This suggests that A. flavus is a potential microorganism for the degradation of PAH compounds in aqueous cultures.     

Biodegradation of Coproducts from Industrially Processed Corn in a Compost Environment

Information pertaining to biodegradability of renewable polymeric material is critical for the design and development of single-use biodegradable consumer products. The rate and extent of biodegradation of corn fiber, corn zein, cornstarch, distillers grain, and corn gluten meal were evaluated in compost environments under variable temperature, pH, and moisture conditions. Generally, composts with higher temperature (40°C), neutral pH (7.0), and 50%–60% moisture appeared to be ideal for corn coproduct biodegradation, particularly for corn gluten meal and corn zein. Low moisture conditions slowed biodegradation considerably, but degradation rates improved when moisture content increased up to 60%. Thereafter, increased moisture particularly slowed the degradation of corn gluten meal and corn zein, whereas cornstarch degradation remained unaffected. At low pH (4.0) and high pH (11.0) the rate of degradation of most coproducts was slowed somewhat. Cornstarch degradation was slower at pH 7.0, but degradation improved with increased temperatures. Increase in compost temperature from 25 to 40°C (in 5°C increments) also improved biodegradation of corn fiber and distillers grain. Addition of 1% urea to compost as a nitrogen source decreased the extent of biodegradation nearly 40% for corn gluten meal and corn zein, and 20% for cornstarch samples. Treatment of compost with 0.02% azide inhibited biodegradation of all coproducts, suggesting that the presence of metabolically active microbial cells is required for effective degradation of biobased materials in a compost environment.     

Effect of Additives on the Improvement of Mechanical and Degradable Properties of Photografted Jute Yarn with Acrylamide

The jute yarn was grafted with acrylamide monomer (AA) under ultraviolet (UV) radiation to modify its mechanical and degradable properties. A number of AA solutions of different concentrations in methanol (MeOH) along with photoinitiator Irgacure 907 [2-methyl-1-(4-methylthiophenyl)-2-morpholinopropanone-1] were prepared. The monomer concentration and irradiation time were optimized. Jute yarn grafted with 30% AA under UV radiation for 60 min showed of the highest polymer loading (PL) value of 22% with a enhanced tensile strength (TS) value of 195% and elongation at break (Eb) value of 256% compared to untreated jute yarn. To further improve the properties of jute yarn, a number of additives (1%) such as urea, polyvinylpyrrolidone, urethane acrylate, and urethane diacrylate were used in the AA (30%) solution. Among all the additives used, urea significantly influenced the PL (27%), TS (230%), and Eb (264%) values of the treated jute yarns. Water uptake and the degradation properties of treated and untreated jute yarn caused by simulated weathering and in soil (25% water) were also studied. The rate of degradation of grafted sample is lower then that of untreated sample. DSC studies showed the thermal stability of the AA plus urea grafted sample.     

链霉菌(Streptomyces sp.)对吡啶的降解特性

从焦化废水的活性污泥中分离出对溶液中吡啶具有降解效果的链霉菌（Streptomyces sp．）,考察了吡啶初始质量浓度、初始pH、降解温度、振荡速度等对吡啶降解效果的影响,初步探讨了该菌降解吡啶的动力学与机理。实验结果表明,该菌对吡啶有很强的耐受力,能以吡啶为惟一碳源和氮源生长。链霉菌在初始pH=8、降解温度30℃、振荡速度100r／min的条件下培养7d后,吡啶的质量浓度从250mg/L降至6．6mg/L,吡啶降解率达97．4％。该菌对吡啶的降解反应符合一级动力学方程,初始质量浓度为100mg／L时的吡啶降解速率常数为0．4011d^-1。紫外一可见光谱分析表明,吡啶经该菌降解后的特征环被破坏。     

Anammox: an option for ammonium removal in bioreactor landfills

Experiments carried out in bioreactor landfill simulators demonstrated that more than 40% of the total N was transferred into the liquid and gas phases during the incubation period of 380 days. Ammonium, an end product of protein degradation and important parameter to consider during landfill closure, tends to accumulate up to inhibitory levels in the leachate of landfills especially in landfills with leachate recirculation. Most efforts to remove ammonium from leachate have been focused on ex situ and partial in situ methods such as nitrification, denitrification and chemical precipitation. Besides minimal contributions from other N-removal processes, Anammox (Anaerobic Ammonium Oxidation) bacteria were found to be active within the simulators. Anammox is considered to be an important contributor to remove N from the solid matrix. However, it was unclear how the necessary nitrite for Anammox metabolism was produced. Moreover, little is known about the nature of residual nitrogen in the waste mass and possible mechanisms to remove it. Intrusion of small quantities of O₂ is not only beneficial for the degradation process of municipal solid waste (MSW) in bioreactor landfills but also significant for the development of the Anammox bacteria that contributed to the removal of ammonium. Volatilisation and Anammox activity were the main N removal mechanisms in these pilot-scale simulators. The results of these experiments bring new insights on the behaviour, evolution and fate of nitrogen from solid waste and present the first evidence of the existence of Anammox activity in bioreactor landfill simulators.     

Effects of alkyl polyglycoside (APG) on composting of agricultural wastes

Composting is the biological degradation and transformation of organic materials under controlled conditions to promote aerobic decomposition. To find effective ways to accelerate composting and improve compost quality, numerous methods including additive addition, inoculation of microorganisms, and the use of biosurfactants have been explored. Studies have shown that biosurfactant addition provides more favorable conditions for microorganism growth, thereby accelerating the composting process. However, biosurfactants have limited applications because they are expensive and their use in composting and microbial fertilizers is prohibited. Meanwhile, alkyl polyglycoside (APG) is considered a “green” surfactant. This study aims to determine whether APG addition into a compost reaction vessel during 28-day composting can enhance the organic matter degradation and composting process of dairy manure. Samples were periodically taken from different reactor depths at 0, 3, 5, 7, 14, 21, and 28 days. pH levels, electrical conductivity (EC), ammonium and nitrate nitrogen, seed germination indices, and microbial population were determined. Organic matter and total nitrogen were also measured.Compared with the untreated control, the sample with APG exhibited slightly increased microbial populations, such as bacteria, fungi, and actinomycetes. APG addition increased temperatures without substantially affecting compost pH and EC throughout the process. After 28 days, APG addition increased nitrate nitrogen concentrations, promoted matter degradation, and increased seed germination indices. The results of this study suggest that the addition of APG provides more favorable conditions for microorganism growth, slightly enhancing organic matter decomposition and accelerating the composting process, improving the compost quality to a certain extent.     

Isolation and Identification of Microorganisms Able to Grow on the Polyester Amide BAK 1095

The polyester amide BAK 1095 is fully degraded by microorganisms. Bacteria that can grow on this polymer were isolated from various environments, such as freshwater, saltwater, arable land, woodland and compost. The mechanism of polymer degradation was examined using selected isolates. It was discovered that the bacteria selectively cleave the polymer at its ester bonds, releasing low-molecular water-soluble oligoamides. These can then be metabolised by other microorganisms [1, 2, 3]. The isolates were also tested for their ability to break down other ester-containing polymers such as Degranil W 50, a linear polyester urethane urea. Eight of the 12 strains examined were also able to break down this polymer.The isolated microorganisms predominantly belong to the genus Bacillus. Mesophilic, halophilic and thermophilic species were isolated. The studies show that polyester amide-degrading bacteria occur in numerous ecosystems and provide data on the microbial breakdown of random copolymers. Information was also obtained on the mechanism involved in the microbial breakdown of polyester amides.     

可见光下氮掺杂罗丹明B分子印迹TiO_2的选择性光催化性能

采用溶胶-凝胶法和分子印迹技术,以尿素为氮源、罗丹明B为模板分子制备了氮掺杂罗丹明B分子印迹TiO_2粉末(N-TiO_2-RhB),并对样品进行了XRD、UV-Vis DRS和BET表征。表征结果显示:氮掺杂和分子印迹一定程度改善了样品的孔隙结构和孔径分布,N-TiO_2-RhB的比表面积和孔体积分别为TiO_2的1.9倍和1.5倍;氮掺杂使TiO_2的光吸收带边发生红移,而分子印迹不能改变催化剂的光吸收带边。N-TiO_2-RhB具有最佳的可见光活性和选择性,对罗丹明B的降解率高达92.7%。对罗丹明B、罗丹明6G、甲基紫和甲基绿的降解过程均符合一级反应动力学方程。     

外加营养源对氯氰菊酯降解菌GF31降解特性的影响

利用本实验室保存的一株铜绿假单胞菌(Pseudomonas aeruginosa)GF31,考察了外加不同的碳、氮源对菌株降解氯氰菊酯特性的影响.实验结果表明:适量浓度的碳、氮源对降解有明显的刺激作用,外加碳源中葡萄糖的刺激作用最为明显,外加0.8 g/L的葡萄糖,氯氰菊酯降解率提高了13.7%;外加氮源中以蛋白胨对微生物的促进作用最突出,当外加5.0 g/L蛋白胨时,氯氰菊酯降解率从27.5%提高到70.0%;降解5 d后,氯氰菊酯的降解已基本趋于平衡.     

The Effect of Natural Tree Gum and Environmental Condition on the Degradation of a Typical Automotive Clear Coat

In this work the effects of natural gum and its simulated compound (Arabic gum) on an acrylic based clear coat applied on different basecoats were studied. The experiments were conducted at various aging processes to simulate the real outdoor conditions by the aid of different analytical techniques including optical microscopy, scanning electron microscopy, ATR-FTIR spectroscopy, DMTA and micro hardness measurements, by which the chemical and mechanical responses of the system were investigated. Results showed that, Arabic and natural gums, due to their sticky nature in the slurry state, can strongly attach to the clear coat surface and perform a significant stress during the drying process. It was shown that, this stress was responsible for the surface cracks produced by gums, indicating a physical degradation mechanism. However, it was revealed that, biological materials could also affect the clear coat chemically. In addition, different surface cracks produced by gums on the clear coat applied on silver and black basecoats were observed and attributed to their surface chemistry and mechanical properties differences. It was shown that different amounts of aluminum flakes existed in the basecoat layers of silver and black system can effectively influence the curing degree of the clear coats applied on the se systems. This leads to different cross-linking density, toughness and surface chemistries. Therefore, different interactions of clear coats and gums, as well as stress distribution and relaxation behaviors of these two systems were found effective in such degradations. Comparison of the mechanical properties and visual effects of gums on clear coats indicated a more severe degradation under the post aging, due to the greater effect of UV light.     

Effect of metal chlorides on thermal degradation of (waste) polycarbonate

In this study, we investigated how to treat (waste) polycarbonate efficiently to reduce its degraded residue. The study was carried out in an isothermal reactor under continuous nitrogen flow at atmospheric pressure to pyrolyze polycarbonate (PC) alone and in the presence of metal chloride. Some metal chlorides were shown to be catalytic active for the degradation of PC at 400 degrees C, which increased degradation conversion from 8.5% to more than 58.3%. Among those active metal chlorides, ZnCl2 and SnCl2 can produce higher liquid product yields. Effects such as particle size of PC, temperature, the weight ratio of metal chloride/PC, and degradation time on the degradation conversion of PC without and with these two most active metal chlorides were studied. Results of the liquid product analysis by GC/MS demonstrated the product composition of PC degradation over the metal chlorides is much simpler than that of degradation alone. The main liquid product is phenol, p-isopropylphenol, diphenyl carbonate, and bisphenol A for all cases.     

Contribution of the lignocellulosic fraction of two-phase olive-mill wastes to the degradation and humification of the organic matter during composting

One of the main disadvantages in the composting of two-phase olive mill wastes (TPOMW) is the long time required for its transformation (up to 40 weeks). The aim of this work was to evaluate the relationship between the degradation of the lignocellulosic fraction of TPOMW and the organic matter (OM) mineralisation rate in four composting piles prepared with different bulking agents and N-sources used to enhance OM degradation. The kinetics of degradation of the lignocellulosic fraction was compared to conventional maturation and stability indices to evaluate its impact on the duration of the composting process. The composition of bulking agents mainly affected the water-soluble fraction which influenced the OM degradation rate (linear or exponential OM degradation pattern) at early stages of the composting process but it neither modified the duration of the process (between 34 and 36 weeks) nor the total OM degradation underwent by the piles. The high initial mineral N availability was a key factor to significantly enhanced microbial activity. The mixture with urea as N-source registered the most efficient degradation of hemicellulose, cellulose and lignin, reducing the thermophilic phase and the total duration of TPOMW composting.     

Analytical determination of the suitability of different processes for the treatment of odorous waste gas

In order to determine the efficiency of different treatment systems for the reduction of odorous emissions, a gas chromatographic method followed by simultaneous mass spectrometry and olfactometry (GC-MS/O) was developed. Samples from a coffee bean roasting and a fat and oil processing plant were analyzed, respectively. The results were compared with the data obtained by olfactometric measurements. At a coffee bean roasting plant, cooling gases were analyzed prior to and after treatment in a full scale bioscrubber. The GC-MS/O analysis showed that the amounts of aldehydes and ketones decreased after treatment of cooling gases of coffee bean roasting in the bioscrubber, whereas the contents of the heterocyclic compounds, like pyridine and the pyrazines, and acetophenone and guaiacol remained almost unchanged. The amounts of dimethyl disulfide, 3-hydroxy-2-butanone, and the carboxylic acids increased after bioscrubber treatment. Furthermore, the performance of each stage of a combined experimental plant for the treatment of exhaust air of fat and oil processing was investigated. This treatment plant consisted of a bioscrubber, a biofilter, and an activated carbon adsorber. The important odor-active compounds of the exhaust air of fat and oil processing were the typical fat oxidation products (aldehydes, ketones) and with lower importance 2-pentylfuran, a few terpenes and aromates. Again, the key odor-active compounds, aldehydes and ketones, were degraded in the bioscrubber. Further degradation of aliphatic, unsaturated, methylated, and cyclic alkanes, as well as aromates, terpenes, and furans by the biofilter was observed. After the last treatment stage, the activated carbon filter, only small amounts of aliphatic, unsaturated, methylated, and cyclic alkanes and aromates remained in the waste gas. For both applications, the results of the developed GC-MS/O method correlated very well with olfactometric measurements.     

Utilizing of Sugar Refinery Waste (Cane Molasses) for Production of Bio-Plastic Under Submerged Fermentation Process

In the present study, depending upon the availability and cheaper cost, different carbon source were tested for the production of PHAs (Polyhydroxyalkonoates) by soil bacterium Pseudomonas aeruginosa and it was found that sugar refinery waste (cane molasses) produced the maximum PHA (biodegradable polymer) which is precursor for bio-plastic development. Urea served as potent nitrogen source over other inorganic nitrogen sources in bio-plastic synthesis. Effect of different physical parameters viz; pH, temperature and agitation speed were also studied on PHA production. Batch cultivation kinetics under optimized cultural and physical condition showed maximum cell mass and PHA concentration of 7.32?±?0.2 and 5.60?±?0.3?g/L, respectively after 54.0?h of cultivation. Sugar refinery waste (Total sugar 4%) and urea (0.8%) improved the economics of the process which exhibited a yield (Y_P/X) of 0.70 with productivity of 0.11?g/L/h. PHA was further characterized as PHB by using Fourier Transform Infra-red Spectroscopy (FT-IR).     

Novel Bioactive Chiral Poly(amide–imide)s Containing Different Amino Acids Linkages: Studies on Synthesis, Characterization and Biodegradability

In this paper chiral bioactive poly(amide–imide)s (PAI)s were synthesized from four different diacids containing chiral amino acids with 4,4′-methylene bis(3-chloro 2,6-diethylaniline) as a diamine via direct polycondensation reaction in a system of tetra-n-butylammonium bromide and triphenyl phosphite as a condensing agent. The structures of these polymers were confirmed by FT-IR, ¹H-NMR, specific rotation, elemental and thermogravimetric analysis (TGA) techniques. TGA showed that the 10 % weight loss temperature in a nitrogen atmosphere was more than 378 °C, which indicates that the resulting PAIs have a good thermal stability. The biodegradability of the monomers and prepared polymers was investigated in culture media and soil burial test for assessment of the susceptibility of these compounds to microbial degradation. The results showed that the synthesized monomers and theirs derived polymers are biologically active and nontoxic to microbial growth.     

A chemox treatment for urea‐ and ammonium‐contaminated groundwater

In a pilot project performed at a fertilizer manufacturing facility, a one‐step chemical oxidation technique successfully treated urea‐ and ammonium‐contaminated groundwater. The oxidation reaction occurred in an 1,100‐gallon batch reactor. The contaminated inflow was buffered by the metered addition of sodium bicarbonate solution and subsequently treated with sodium hypochlorite in an 8:1 weight ratio of Cl₂:N. In an instantaneous reaction, the urea and ammo‐nium‐N were completely oxidized to nitrogen gas that was vented to the atmosphere during mixing. The pH of the reactor discharge was ?6.5. Sodium sulfite was used to reduce residual hypochlorite in the reactor effluent to chloride to provide process water with characteristics suitable for discharge. Oxidation rates were similar with different strengths of hypochlorite; however, a 5 to 6 percent sodium hypochlorite (as Cl₂) solution was the most stable. © 2005 Wiley Periodicals, Inc.     

Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.