Distributions of total metals in the surface sediments of the Bandirma and Erdek Gulfs,Marmara Sea,Turkey

The aim of this study is to determine the contents of aluminum, iron, manganese, nickel, copper, zinc, chromium, cadmium, lead, and mercury in sediments at 1–30?m depths of the Band?rma and Erdek Gulfs in the Southern Inner Shelf of the Marmara Sea. Sediment samples were collected from different depths (1?m, 5?m, 10?m, 20?m, 30?m) at each region in February 2008. Primary hydrographic conditions, such as temperature (6.6–14.5°C), salinity (22.6–26.875 psu), percentage of dissolved oxygen saturation (35–83 %), and pH (8.0–8.4) were recorded for each sampling point. Moreover the total organic carbon (0.5–2.9%) and the total calcium carbonate contents (0.8–60%) of sediment samples were determined. In surface sediments of both gulfs, Pb (21–62?mg?kg^?1) and Cd (0.52–0.86?mg?kg^?1) contents were determined to be higher than the shale average (Pb 20?mg?kg^?1, Cd 0.2?mg?kg^?1) while the other metal contents were measured to be lower in general. On the other hand, generally Hg (0.06–1.1?mg?kg^?1) contents were higher than the shale average (0.3?mg?kg^?1)at all of the examined stations in the Band?rma Gulf and lower than the shale average in the Erdek Gulf.     

Heavy metal accumulation in algae and sediments of the Black Sea coast of Turkey

The paper reports heavy metal accumulation in algae collected at four stations and in sediments at three stations on the Black Sea coast of Turkey. The metals analysed are Cd, Co, Cr, Cu, Fe, Pb, Sb and Zn. The metal content of algae increased generally (with some exceptions) from 1991 till 1993 in ?ile and Sinop. In the sediments Sb in ?ile, As in Riva, Fe, Zn in Sinop are high. According to these findings the metal pollution increased in Turkish area of the Black Sea during the years investigated.     

Sources and risk assessment of metal contamination in soils at the international airport of Shanghai,China

Concentrations of Cd, Pb, Zn, Cr, Cu, and Ni in soils at the Pudong International Airport (PIA) of Shanghai, China, were determined to assess the sources and potential ecological risks. Compared to the soil background values of Shanghai, 31 soil samples out of 33 were highly contaminated with Cd, and 76% were moderately contaminated by Cr, Ni, Pb, and Zn. Principal component analysis and clustering analysis indicated that Pb and Cd mainly originated from anthropogenic sources, while Zn, Cr, Ni, and Cu were mainly from natural sources. Relatively high concentrations of Cd and Pb were observed at sampling points near the landing or take-off sites or a close-by highway. Both air and highway traffic affected the quality of the soils at PIA.     

Fuzzy comprehensive assessment of metal contamination of water and sediments in Ondo Estuary,Nigeria

A more reliable methodology for evaluating metal contamination of coastal water and sediments using fuzzy comprehensive assessment (FCA) is presented by this study. Ten metals (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb, V and Zn) were investigated in water and sediments from ten sampling sites and formulated into fuzzy matrix based on three contamination classifications of pristine, moderately enriched and extremely impacted categories using regulatory limits as criteria. The products of the matrices from membership function of the observed data and the weight matrices generate indices that classify the degree of metal impact on the sites. The results of the FCA show that the estuary is negatively impacted by metals in a range of 45.5–75.1% membership in the extremely impacted category with potential adverse effects on the ecosystem of the neighbouring Atlantic Ocean. The crude oil exploration activity at site 1 is the major source input of the metals beside Fe and Mn which are natural to the geological structure of the area while domestic waste discharges contribute notably to metal contamination in some sites.     

Geochemical index of trace metals in the surficial sediments from the western continental shelf of India, Arabian Sea

The present study focuses on the determination and abundance of trace metals (viz. Cu, Ni, Zn, Cr, Co, Cd, Mn and Fe) in the surficial sediments of west coast of Arabian Sea along the Indian subcontinent. Sediment samples were collected from three transects along the western continental shelf of Arabian Sea. The enrichment of Fe and Mn in coastal oxic-sediments indicates the precipitation of these redox sensitive elements as Fe- and Mn-hydroxides and oxides, whereas the low Fe and Mn concentrations in the oxygen deficient sediments of deeper stations reflects the dissolution of their hydroxides and oxides. Concentrations of fairly redox insensitive trace metals like Cu, Ni, Zn, Cr and Cd (with the exceptions of Cr) showed higher values at nearshore sediments, then it decreased towards seaward and again showed a slight increase at oxygen minimum stations in all the three transects. This geochemical variability in their distributional characteristics is mainly associated with the extent to which the precipitation or dissolution of Fe- and Mn-oxides/hydroxides occur since the scavenging or releasing effects of Fe- and Mn-oxides/hydroxides act as significant ‘sinks’ or ‘sources’ of heavy metals. The change in wind pattern, coastal upwelling and increased productivity are also the reported factors which influence the biogeochemical cycling of trace metals in the surface sediments of west coast of India. Enrichment factor generally showed a high gradient accumulation from nearshore to shelf.     

Response of benthic foraminifera to heavy metal contamination in marine sediments (Sicilian coasts,Mediterranean Sea)

To examine the suitability of benthic foraminifera and their test deformations as bioindicators of pollution in coastal marine environments, we studied foraminifera and metal concentrations in 72 marine sediment samples, collected from the inner shelf along the Sicilian coast (Gulfs of Palermo and Termini) and on the south-eastern coast of Lampedusa Island. These areas are characterised by different environmental conditions. On the basis of pollution sources and foraminiferal assemblages, we recognised different zones in the Gulf of Palermo. The most polluted zones showed high metal concentrations, and low diversity of benthic foraminifera with species typical of stressed environments. By contrast, the lowest polluted zones showed a high population density and the highest percentages of epiphytes. Epiphytes were abundant where a Posidonia oceanica meadow was present and decreased in the most polluted zones. Sediments of the Gulf of Termini and Lampedusa exhibited high percentages of benthic foraminifera typical of well-oxygenated waters and low concentrations of metals, with the exception of sites located near sewage outfalls and harbour areas. Furthermore, even though deformed tests are commonly known in natural stressed environmental conditions, this study shows that in the most polluted zones, benthic foraminifera were characterised by the highest percentages of deformed individuals.     

Fractionation analysis of some heavy metals in sediments of the north-western part of the Red Sea,Egypt

Sequential extraction was used to study operationally determined chemical forms (exchangeable, carbonate, reducible metal, oxidisable metal and the residual fractions) of the metals Cd, Cu, Zn and Pb in sediments from 12 sample sites collected from the north-western part of the Red Sea, where improper recreational facilities have resulted in diverse impacts on the coastal environments fronting some of the recreation projects. The results showed that the average percentage of each phase was different among metal types; the residual binding fraction was the most important phase for binding Zn and to a lesser degree Cu. The reducible fraction was the second most important phase for Zn and Cu. For Pb, the fractions bounded to the residual fractions and the reducible phases are equal and exhibited the highest percentages. By contrast, the carbonate fraction was predominant for Cd. The percentages of Cd, Cu, Zn and Pb associated with the carbonate and exchangeable fractions, which are potentially the most harmful to the environment, were calculated and assessed at different sampling sites of the studied sediments. According to the Risk Assessment Code (RAC), the results reveal that Cd is the only metal that poses a high risk to the environment.     

Trace metal distribution in different chemical fractions of marine sediments along the eastern Aegean shelf

The major objective of this study was to carry out sequential chemical extraction for the partitioning of particulate trace metals in sediment samples, collected along the eastern Aegean shelf during cruises July‐August 1994, in the framework of a National Marine Measurement and Monitoring Programme for the Aegean Sea.

Five metals, Cd, Pb, Cu, Zn and Cr were examined in each of sediment samples. Three chemical fractions of the sediments were separated and concentrations of the trace metals were determined by AAS techniques. The three different leaches used were hydroxylamine hydrochloride‐acetic acid, hydrogen peroxide and nitric‐perchloric acids.

Metals were concentrated mainly in the fraction extracted by nitric‐perchloric acids. Lead in the first fraction were found in the sediments of Northern part of Aegean, where the concentration of organic material was high.

The total concentrations of Cd, Cu, Zn, Cr were higher in Izmir Bay than the other sampling points. The distribution of Pb concentrations was the highest in Edremit Bay and Izmir Bay.     

Analysis and assessment of heavy metal contamination in surface water and sediments: a case study from Luan River,Northern China

Concentrations of the heavy metals Cu, Ni, Pb, Zn, Cd, and Cr were examined in surface water and sediment from the Luan River inChina,. With a decline in Cu and Ni concentration found in surface water at downstream stations. This finding suggests that water currents are a major explanatory factor in heavy metal contamination. The abundance of Cr, Pb, and Cd observed in the middle reaches of the river indicates heavy metal contamination in local areas, although there was an obvious decrease in concentrations in the water downstream of the Daheiting Reservoir. The significant rising trend in Cu, Pb, and Ni seen the sediment farther away from the river also suggests that anthropogenic activities contribute to heavy metal pollution Sediments were therefore used as environmental indicators, with sediment assessment was conducted using the geo-accumulation index (I_geo) and the potential ecological risk index (RI). The I_geo values revealed that Cd (3.13) and Cr (2.39) had accumulated significantly in the Luan River. The RI values for most (89%) of the sampling stations were higher than 300, suggesting that sediment from the Luan River poses a severe ecological risk, with the potential ecological risks downstream higher than that in the upper and middle streams. Good correlations among Pb/Ni, Pb/Cd, Cu/Pb, and Cu/Cd in the water and Cr/Ni in the sediment were observed. Cluster analysis suggested that Cd may have various origins, being derived from anthropogenic sources.     

An assessment of heavy-metal contamination in surface sediments of the Suez Gulf using geoaccumulation indexes and statistical analysis

An assessment of marine pollution due to metals was made in the Suez Gulf based on surface costal sediment collected from 18 locations along the Gulf. The samples were dried and acid-digested, and the metal contents (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) were determined using a flame atomic absorption spectrophotometer (air-acetylene) with deuterium background correction. An evaluation of the heavy-metal pollution status of the Gulf was carried out using enrichment factors (EF) and geo-accumulation Indexes (I_geo). Also, heavy-metal concentrations in Suez Gulf sediments were evaluated using the Effect Range-Low (ERL) and the Effect Range-Median (ERM). The results of a Spearman correlation and factor and cluster analysis of the heavy metals analysed in the collected sediment were discussed. The main source of contamination is offshore oil field and industrial wastes, which arise due to the ineffective and inefficient operation equipments, illegal discharge and lack of supervision, and prosecution of offenders.     

Characteristics and risk assessment of organochlorine pesticide residues in surface sediments collected at the Qingshitan Reservoir

ABSTRACT

An ultrasonic extraction – gas chromatography – electron capture detector analytical method was used to measure the concentration and types of organochlorine (OC) pesticides in sediment to obtain a better understanding of the characteristics and hidden ecological risks associated with OC pesticide exposure in surface sediment of the Qingshitan Reservoir. Fifteen types of OC pesticides were detected in the sediment, and the sum concentration of these chemicals was in the 149.32–490.19 ng/g range (mean value: 319.39 ng/g). The concentrations of detected OC pesticides occurred in the following order: hexachlorohexanes (HCHs) (mean value: 200.17 ng/g) > DDTs (mean value: 36.92 ng/g) > heptachlors (mean value: 32.74 ng/g) > methoxychlor (mean value: 24.13 ng/g). There was a 100% detection rate for HCH isomers, and their concentrations occurred in the following order: β-HCH > δ-HCH > γ-HCH > α-HCH. β-HCH was the main component of HCHs. Ratios between α-HCH/γ-HCH and β-/(α+γ)-HCH were used to investigate the sources of pollution. Most of the surveyed areas were polluted by lindane, which originated from past pesticide residue usage, and no new inputs of HCHs were found. DDT was the major component of the DDTs, and accounted for 52%–87% of the DDTs. The ratios of (DDE+DDD)/DDT at all sample collection points were less than 1, indicating that degradation rate of DDTs in sediment was low and there was a new input of DDTs in these surveyed areas. The ratio of DDD/DDE was less than 1 at most of the sample collection points, indicating that the degradation of DDT in the sediments primarily took place under aerobic conditions. Comparison of OC pesticide residual levels in the underwater sediment collected at the Qingshitan Reservoir to other states and countries showed the pollution level of these chemicals of the Qingshitan Reservoir was relatively high. The ecological risk was assessed based on guideline values of effects range-low (ERL) and effects range-medium (ERM). The results showed that DDD, DDE, DDTs and endrin residues in the sediment posed a moderate ecological risk, but DDT and γ-HCH showed high ecological risk. These OC pesticides might adversely affect biological systems, and need to be addressed.     

Heavy metal contamination in the sediment and plants of the Sundarbans,India

Heavy metals are one of the hazardous contaminants in the total environment. The present study shows that the Sundarbans soil is contaminated with sludge and moderately contaminated with Cd and Co according to Contamination factor (CF), Enrichment factor (EF), Index of geo-accumulation (Igeo), and Ecological risk factor (ERF). The correlation, principle component analysis and factor analysis showed that Mn and Fe might have lithogenic origin whereas Cu, Pb, Co and Cd have anthropogenic inputs. The screening quick reference table (SQuiRT) shows that Cu and Cd may exert a possible toxic effect on the sediment dwelling biota. The phytoremediation study revealed that the endangered Heritiera fomes leaves can accumulate 80% of cadmium from the soil, which is highest based on this study as compared to other mangroves. The study also indicated that threatened date palm Phoenix paludosa leaves can accumulate 74% and 73% of Cu and Fe, respectively, from the soil. Now a day, there has been a spurt in mangrove plantations worldwide for the conservation of mangrove ecosystem using ecological engineering approaches. The present study is very much useful to choose a proper plant to decontaminate the soil from various heavy metal pollutants for effective management of mangrove wetlands.     

Ecological risks of polycyclic aromatic hydrocarbons found in coastal sediments along the northern shores of the Bohai Sea (China)

The total concentrations of 16 United States Environmental Protection Agency (US EPA)-listed polycyclic aromatic hydrocarbons (PAHs) found in coastal and estuarine sediments along the northern shores of the Bohai and Yellow Seas, China, at any study location varied from 0.236 to 8.34 nM g^?1 dry weight (dw). For a given PAH, concentrations varied by one to two orders of magnitude. Ecological risk assessments based on biota–sediment accumulation factors (BSAFs) indicated that the potential ecological hazard of PAHs in the sediments was limited. The average total sediment PAH concentrations were less than the effects range low, indicating that PAHs currently present in the sediments were not harmful to aquatic organisms. The estimated PAH concentration in the aquatic organisms was 0.223 nM g^?1 and posed a limited threat to human health via biological concentration from sediment to harvest of the sea. Assuming no additional PAH inputs, 99% of the 16 PAH molecules currently present in the sediments would be degraded in 40 years.     

Methodological approach for metal pollution evaluation in sediments collected from the Taranto Gulf

The concentrations of Hg, Cd, Pb, Cu, Ni, V, and Sn were determined in marine sediments collected from Taranto Gulf (Ionian Sea, Southern Italy). The aim of this article is to study the methodological approach in order to evaluate total metal levels determined in marine sediments of a contaminated area (Taranto Gulf, Southern Italy), to identify contaminated areas and to predict adverse biological effects based on Sediment Quality Guidelines (SQGs). The results are discussed in relation to geological characteristics of sediments in order to define background levels and anthropogenic input. Experimental results were elaborated by multivariate statistical techniques and Geographical Information System (GIS) software. The geoaccumulation index I _geo and two sets of SQGs (in particular (a) the threshold effect level (TEL), the probable effect level (PEL) and (b) the effect range-low (ERL) and the effect range median (ERM)) have been used for environmental evaluation of metal concentrations. Results show that in Taranto coastal area, Mar Piccolo basin represents the most contaminated area. A comparison with results from other Mediterranean areas demonstrates that for some metals (such as Cd, Pb, and Hg) Taranto seas represent one of the most polluted areas in the Mediterranean Sea. A comparison of metal levels with SQGs also suggests an ecotoxicological risk for benthic organisms mainly in the first inlet of Mar Piccolo.     

深圳蛇口渔港沉积物重金属分布及潜在生态风险评价

沉积物重金属污染对水生生态系统具有潜在危害.渔港是海岸带水环境的重要组成部分.对取自深圳蛇口渔港的10个表层沉积物样品中的As、Cd、Cu、Pb和Zn等典型重金属元素进行了分析,探讨了其空间分布;运用地积累指数法(Igeo)和生态危害指数法(RI),评价了表层沉积物中重金属的富集程度和潜在生态风险,初步探讨了其污染来源.结果表明:(1)蛇口渔港海域沉积物重金属Cu的污染十分严重,Zn和Pb污染较严重,其浓度均为港内>港口>港外;(2)渔港内沉积物重金属的富集达重度污染程度,潜在生态危害风险强.其中,又以Cu的富集程度最高,潜在生态危害风险最强;(3)渔港内Cu的污染,可能与电子工业废水的排放,以及渔业特有的防附着生物涂料有关.     

湖南某植烟土壤重金属含量及其生态风险评价

采集了湖南某植烟区表层土壤样品112份,测定了土壤中6种重金属元素的含量,并采用单因子污染指数法、综合污染指数法和潜在生态危害指数法对其污染状况进行评价.结果表明,植烟区土壤重金属平均含量分别为36.25(Cu)、69.78(Zn)、37.66(Pb)、0.36(Cd)、12.71(As)、0.27(Hg)mg·kg-1.6个元素的变异系数在32.57%—59.03%之间,属于中等变异,元素分布不均.污染评价结果表明,植烟区土壤重金属Cu、Zn、Pb、As的单因子污染指数平均值小于1,其污染较轻.而重金属Cd和Hg的超标率为54.46%和58.04%,土壤受到Cd和Hg污染.潜在生态风险指数评价结果显示植烟区土壤重金属属于轻度污染.相关性分析结果表明Cu、Zn、Pb和Cd之间呈显著相关性,As和Hg相关性显著,说明其同源性较高.来源分析表明,研究区Cu、Zn、Pb和Cd污染来源东北部主要为矿区污染,西南部主要是人为源,As主要来源为成土母质和生活源,Hg主要为大气污染源.     

An assessment of contamination and ecological risk of metals in sediments of the Guaracara,Caparo and Couva rivers in Trinidad,West Indies

The presence of metals in an aquatic environment can serve as a biomarker for pollution and can be used to evaluate its contamination status. Rapid industrialisation in recent decades has propelled Trinidad and Tobago to be one of the most developed nations within the Caribbean region and has stimulated the awareness of potential ecological risks from various industrial activities affecting the rivers of Trinidad. Sediment samples from three rivers along the West coast of Trinidad were analysed for Cd, Cr, Cu, Mn, Ni, Pb and Zn. For all three rivers, the metal concentrations in sediments were in the range of 0.40–2.31?μg/g, 12.77–33.04?μg/g, 14.51–72.89?μg/g, 224.90–4472.83?μg/g, 8.20–43.08?μg/g, 22.63–38.34?μg/g and 92.0–5462.60?μg/g for Cd, Cr, Cu, Mn, Ni, Pb and Zn, respectively. Assessment of the pollution status indicated that all three rivers were considered polluted, with significant contributions from Cr, Cu, Mn, Ni and Zn. The potential ecological risk for all three rivers, however, was low and multivariate statistics revealed that mainly anthropogenic sources contributed to the metal concentrations in sediments of all three rivers.     

Physicochemical characterization of sediments from Tajan river basin in the northern Iran

Abstract

Continuous monitoring of water quality of freshwater bodies may prevent outbreak of diseases and occurrence of hazards through employment of effective protection measures. The aim of the current investigation was to determine occurrence of water and sediment pollution in Tajan River North Iran which ultimately may be a threat to recreational beaches of Caspian Sea. Water samples were analyzed for various physicochemical parameters including pH, electrical conductivity (EC), total dissolved solids (TDS), bicarbonates, sulfates, cations, chlorides and heavy metals. The concentrations of zinc (Zn), cadmium (Cd), chromium (Cr) and lead (Pb) were determined using atomic absorption spectroscopy. Similarly, sediment samples were assessed for physicochemical characteristics including pH, EC, saturation percentage, organic matter, organic carbon, texture and cations. Overall, pH, EC, organic matter, and cation values were within acceptable limits according to USEPA water quality guidelines. However, phosphorus (P) concentration up to 5.6?mg/L was considered as “unsafe” which might result in undesirable eutrophication and increased accumulation of sediment organic content leading to excessive growth of algal species in riverine ecosystem. Heavy metal concentrations of Cd (0.08?ppm) and Pb (3?ppm) were above USEPA threshold limits which may consequently affect sustainability of Tajan River. The unacceptable levels of Cd, Pb and P may produce eutrophication of Caspian Sea coasts and damage the ecosystem.     

Levels of heavy metals (Zn,Cu, Cd,and Pb) in mudskippers (Periophthalmodon schlosseri) and sediments collected from intertidal areas at Morib and Remis,Peninsular Malaysia

The concentrations of Zn, Cu, Cd, and Pb were determined in different tissues of mudskipper fishes Periophthalmodon schlosseri caught at two selected locations (Morib and Remis) of the intertidal mudflat area of Selangor state, West Coast of Peninsular Malaysia and in surface sediment samples. Metal concentrations in the mudskipper tissue and in the sediment samples tended to vary significantly (p < 0.05) between the two locations. Higher metal concentrations (except for Zn) were mostly found in the tissues of mudskippers from Remis. For sediment samples, significantly (p < 0.05) higher metal concentrations of all metals were also found at Remis. Generally, metal distribution between different tissues of mudskipper varied with scales being highly accumulative of Zn, Cd, and Pb, while for Cu, the highest mean concentrations were found in the liver. The lowest mean concentrations of Zn, Cu, and Cd were found in the muscles except for Pb, which was lowest in the liver. This study suggests that mudskippers can be potential biomonitoring organisms for heavy metal bioavailability and contamination of intertidal coastal mudflats. The concentrations of Cd and Pb were slightly above the acceptable limits of Malaysian and European food safety guidelines.     

Factor analysis applied to a geochemical study of suspended sediments from the Gediz River, western Turkey

Suspended sediment particles collected from 33 sampling points at a site located close to industrial and geological areas in Gediz river, western Turkey were analysed for 15 elements (Ca, Ti, Mn, Zn, Rb, Sr, Y, Zr, Ba, La, Ce, Ra, U, Th and ⁴⁰K) by Energy Dispersive X-ray Fluorescence Spectroscopy (XRF), Gamma Spectroscopy (GS), and Collector Chamber Method (CCM). Both varimax and oblimin factor rotations were applied to the data, but varimax rotated factor analysis was used for source identification of suspended sediments. Three factors were extracted from the suspended data, which account for about 70% of the total data variance. These factors are interpreted as economy, mine and radioactivity/mine/agriculture.