Effect of ultrasonic agitation on the release of copper, iron, manganese and zinc from soil and sediment using the BCR three-stage sequential extraction

An ultrasonic bath and an ultrasonic probe have been used to develop rapid versions of the three-stage Community Bureau of Reference (BCR, now the Standards, Measurement and Testing Programme) sequential extraction procedure. The effect of the ultrasonic treatments on the extraction of copper, iron, manganese and zinc from a sewage sludge-amended soil has been assessed. Recoveries similar to those of conventional shaking (i.e., conventional value, +/- 30%) could generally be obtained for copper, manganese and zinc, but not for the important matrix element iron. With the use of compromise sonication conditions, steps 1, 2 and 3 of the sequential extraction (excluding the hydrogen peroxide digestion in step 3, which was not performed with sonication) could be completed in 3, 5 and 1 min, respectively, using the ultrasonic probe, and in 3, 1 and 1 h, respectively, using the bath. The extraction procedures developed using the soil performed well when applied to lake sediment BCR CRM 601. Analyte partitioning was generally similar to that obtained with mechanical shaking, and overall metal recoveries were 84-98% of those obtained with the conventional BCR protocol, except for copper extracted with the probe (74%). Poorer performance (analyte recoveries, 58-104%) was obtained when the methods were applied to an intertidal sediment. This highlights the difficulty of developing a version of the BCR extraction, with ultrasonic assistance, which gives a performance equivalent to conventional shaking when applied to different substrates.     

Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

Investigation of trace elements in agricultural soils by BCR sequential extraction method and its transfer to wheat plants

In this study, soil samples were collected from Edirne, Turkey in both summer and winter seasons and subjected to the modified Community Bureau of Reference (BCR) sequential extraction procedure in order to investigate the chemical partitioning of metals in soils and to predict heavy metals uptake by wheat grains which grown at the same soils. The samples were subjected to a three stage extraction procedure proposed by the BCR. The three phases that were separated out in the following order: (1) carbonate, exchangeable, (2) Fe?CMn oxides, and (3) organic matter. Metal concentrations of soil fractions and grain samples were determined by inductively coupled plasma atomic emission spectroscopy. The wheat samples were prepared to analysis using microwave acid digestion procedure. The pseudo-total concentrations of metals were determined after aqua regia digestion. The analytical accuracy of the method was evaluated by using the Standard Reference Materials (BCR 142R Light Sandy Soil, NIST 2711 Montana Soil, and NIST 2704 Buffalo River Sediment). The sum of the metal contents obtained from the modified BCR sequential extraction procedure and pseudo-total metal contents for soil samples were used to calculate recovery values. In order to evaluate the bioavailability of metals, the relationships between the wheat-metal and soil-extractable metal concentrations were compared.     

An ultrasound accelerated sequential extraction method and its application for element partitioning studies in compost from mixed waste streams

A rapid ultrasound accelerated sequential extraction procedure is presented which is modified from the standard BCR protocol and validated using the BCR 601 reference material. The method is accelerated at the extraction steps: for example, in the standard method each extraction step takes 16 h whereas with the ultrasonic extraction method developed in this work each step took 15 min. This means a further step can be included in the protocol without greatly increasing the experimental time. An extraction with pyrophosphate solution was therefore included to provide more information about the interaction between the elements and humic substances during the composting process. The new method has been applied to monitoring the metal partitioning behaviours in a composting process involving mixed waste streams. The metal partitioning profiles obtained from this new method show that in many cases composting tends to redistribute the metals from more labile forms to combined forms, especially to forms combined with humic substances.     

Comparison of three sequential extraction procedures for partitioning of heavy metals in car park dusts

The aim of this study was to elucidate the amount of metal released at each step by using different extractants in three sequential extraction schemes for the partitioning of metal contents of car park deposited dust samples. For this purpose, three different sequential extraction procedures (SEP) were employed for the metal fractionation in car park dust samples collected from the campus of Erciyes University, Kayseri, Turkey. While two of the sequential extraction procedures contain five steps the other, namely the BCR sequential extraction scheme, has three steps. The first two methods fractionate metals to be exchangeable, bound to carbonates, bound to Mn oxides, bound to Fe oxides and bound to organic matter, and the BCR protocol fractionates the metals as acid soluble and exchangeable, reducible, and oxidisable. Determination of the metals Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn was performed by flame atomic absorption spectrometry (FAAS). The results obtained by the three methods were compared and showed that the amount of metal released at each step of the leaching procedure depended both on the type of reagents used and the sequence in which they were applied. The most mobile elements were Cd, Pb and Zn which are metals potentially toxic to the environment and are also known to originate from traffic. The calculated enrichment factors for Cd and Pb were substantially high (73.5-187 and 18.4-27.5, respectively) and somewhat lower for Zn (5.1-6.8). These results confirm that they are important metal pollutants for car parks. Detection limits and recoveries were found in the range of 0.01-1.39 microg ml(-1) and 68-126%, respectively, for the metals studied and the three sequential extraction procedures.     

Comparison of three sequential extraction protocols for the fractionation of potentially toxic metals in coastal sediments

In the determination of the best sequential extraction procedures (SEP) for the speciation of metals in sediment samples from the Lagos lagoon system, three sequential extraction procedures were compared for the fractionation of Cd, Cr, Cu, Pb, and Zn. The SEP compared included a modified Tessier??s procedure carried out in five steps, while the two other procedures were the three-step original Community Bureau of Reference (BCR) and the modified BCR techniques (four steps). Quantification of the metal concentration was achieved with a flame atomic absorption spectrophotometer. The results obtained by the three methods were compared, and the modified BCR and Tessier SEP were found to extract more Cu, Cr, Pb, and Zn in the reducible phase and therefore a decrease in the oxidizable phase than the original BCR SEP. The most mobile elements were found to be Cd, Pb, and Zn. These are of environmental concern, as these potentially toxic metals could be easily released into the aquatic environment with consequent ingestion by aquatic organisms, thereby entering the food chain. The mass balance (percent recovery) was found to be between 85% and 115% in most cases. Prior to the comparison, the analytical performance of the laboratory was tested using a secondary reference material, GLAURM, using the three-step modified BCR procedure. The results showed high reliability of the analytical performance of the laboratory for all the metals considered.     

Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

Comparison of unmodified and modified BCR sequential extraction schemes for the fractionation of heavy metals in shrimp aquaculture sludge from Selangor, Malaysia

A study was carried out to investigate the fractionation of Cd, Cr, Cu, Fe, Mn, Pb, and Zn in shrimp aquaculture sludge from Selangor, Malaysia, using original (unmodified) and modified four-steps BCR (European Community Bureau of Reference, now known as the Standards Measurements and Testing Program) sequential extraction scheme. Step 2 of the unmodified BCR procedure (subsequently called Method A) involves treatment with 0.1 M hydroxylammonium chloride at pH 2, whereas 0.5 M hydroxylammonium chloride at pH 1.5 was used in the modified BCR procedure (subsequently called Method B). Metal analyses were carried out by flame atomic absorption spectrometry. A pseudo-total aqua-regia digest of BCR CRM 701 has also been undertaken for quality assurance purposes. The recovery of Method A for all metals studied ranges from 96.14% to 105.26%, while the recovery for Method B ranges from 95.94% to 122.40%. Our results reveal that Method A underestimated the proportion of metals bound to the easily reducible fraction except for copper. Therefore, the potential mobility of these elements is higher than others. Thus, to use this sludge as a fertilizer we have to first find a remediation for reduction of heavy metal contamination.     

A field screening test for the assessment of concentrations and mobility of potentially toxic elements in soils: a case study on urban soils from Rome and Novi Sad

The increasing demand for environmental pollution control results in the development and use of new procedures for the determination of dangerous chemicals. Simple screening methods, which can be used directly in the field for a preliminary assessment of soil contamination, seem to be extremely advantageous. In our laboratory, we developed and optimized a rapid test for a preliminary evaluation of both the concentration and the mobility of some potentially toxic metals in soils. This screening test consists of a single extraction of the soil sample with a buffer solution, followed by the titration of the extracted solution with dithizone to determine the contents of bi-valent heavy metals (such as Pb, Cu, Zn, and Cd). This screening method was then directly applied in the field during the sampling campaign in the framework of an Italian–Serbian collaborative project, finalized in the study of metal availability in soils. The results obtained in the field with the rapid test were compared with those obtained in the laboratory following the conventional procedure commonly used to evaluate metal bioavailability (diethylenetriaminepentaacetic extraction). Moreover, selected samples were analyzed sequentially in the laboratory using the standardized BCR three-step sequential extraction procedure. The screening test gave results conceptually in good agreement with those obtained via the BCR procedure. These preliminary data show that the proposed screening test is a reliable method for the preliminary rapid evaluation of metal total concentrations and of potential metal mobility in soils, supporting sampling activities directly in the field.     

A simple method for the extraction of mutagens from airborne particles

Organic materials were extracted with acetone from filters of airborne particles by soaking, shaking, soxhletion, and sonication. These extracts were tested with and without S9 for mutagenicity using Ames assay and arabinose-resistant assay of Salmonella typhimurium. Among the extraction methods, soaking extract had the highest mutagenic activity followed by sonication, shaking, and soxhletion in both the assays. With the samples studied, it was concluded that soaking with acetone for 1/2 hr is the simplest and an efficient procedure for the extraction of mutagens from airborne particles.Results of cooperative investigation of NIOSH and West Virginia Agricultural and Forstry Experimental Station. Published with the approval of the Director of the West Virginia Agricultural and Forestry Experiment Station as Scientific Paper No. 1822.     

Application of a modified BCR sequential extraction (three-step) procedure for the determination of extractable trace metal contents in a sewage sludge amended soil reference material (CRM 483), complemented by a three-year stability study of acetic acid and EDTA extractable metal content

This paper provides additional data on a sewage sludge amended soil certified reference material, CRM 483, which was certified in 1997 for its EDTA and acetic acid extractable contents of some trace metals, following standardised extraction procedures. The additional work aimed to test the long-term stability of the material and the applicability of an improved version of the BCR three-step sequential extraction procedure on the sewage sludge amended soil (CRM 483). The paper demonstrates the CRM 483 long-term stability for EDTA and acetic acid extractable contents of Cd, Cr, Cu, Ni, Pb and Zn and gives the results (obtained in the framework of an interlaboratory study) for the extractable contents of the same elements in the CRM 483, following the BCR three-step sequential extraction scheme. The aqua regia extractable contents following the ISO 11466 Standard are also given. The data are given as indicative (not certified) values.     

An experimental design for the optimization of the extraction methods of metallic mobile fractions from environmental solid samples

The evaluation of the cadmium and lead mobile forms from environmental solid samples provides information about their mobility and bioavailability. In the present study, the Cd and Pb mobile fractions were obtained by two modified extraction methods applied to industrial and acidic pH soils or to polluted sediments. In order to highlight that the extraction procedure does not significantly influence the quantitative atomic absorption spectrometric determination of cadmium and lead, the robustness of the extraction methods was evaluated and proven applying a Youden and Steiner factorial design. Within this experimental design, the shaking rate, the shaking time, and the solid/liquid extraction ratio were modified. The measurement uncertainty of the whole analytical procedure was assessed, the contribution of the factors involved in the extraction process being insignificant compared to the other uncertainty sources. The importance of the study is related to the fact that it proves the applicability in the routine laboratory practice of the modified extraction methods by increasing the extraction ratio following thorough optimization and robustness studies.     

土壤和河流沉积物中六六六和滴滴涕残留的测定

采用密闭微波提取、超声波提取、索氏提取对土壤和河流沉积物进行前处理,提取液经弗罗里硅土柱净化或浓硫酸净化.通过回收率实验和精密度实验对三种提取方法和两种净化方法进行比较,建立了微波提取土壤和河流沉积物中六六六和滴滴涕,浓硫酸净化,气相色谱一质谱测定的分析方法,方法回收率在84%～110%之间,精密度(RSD)在2.8%～9.9%之间.采用该方法对阜阳市废弃农药厂周围的土壤和河流沉积物中六六六和滴滴涕进行了监测.     

Extraction of labile metals from solid media by dilute hydrochloric acid

Extraction of labile metals from solid media is environmentally more meaningful than a total digestion. A variety of reagents have been introduced in the literature, but dilute HCl has received the greatest attention. We compare metal concentrations liberated by a dilute HCl leach with the sum of the 3-step optimized (standardized) BCR sequential extraction procedure. This is the first study to compare these procedures over a range of grain sizes. Road-deposited sediments from 10 sites in Honolulu were fractionated into six grain size classes. Aliquots of individual fractions were digested with dilute HCl, the 3-step BCR procedure (‘labile’), and a 4-acid (total) procedure. Results indicated that the weighted labile concentrations of Al, Cu, Fe, Mn, Ni, Pb and Zn were statistically greater than those from the dilute HCl leach. However, regression analysis indicated strong statistically significant relationships between the two partial extraction procedures for all metals. On a whole-sample basis, the toxicity classifications for anthropogenic-enhanced metals (Cu, Pb and Zn) were similar between extractions. Taken together, results suggest that the application of dilute HCl to solid media provides a rapid, cost-effective, and environmentally meaningful approach for contaminant monitoring.     

Mobility and ecological risk assessment of trace metals in polluted estuarine sediments using a sequential extraction scheme

The three-stage sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb, and Zn, proposed by the Commission of the European Communities Bureau of Reference, was applied to sediment five samples collected from the Sal estuary, Sergipe State, northeast Brazil, in September 2009. The method showed satisfactory recoveries, detection limits, and standard deviations for determinations of trace metals in the sediments. Cd and Pb were the metals most prevalent in the bioavailable fractions (carbonates, Fe and Mn oxides, organic matter, and sulfides), while Ni, Zn, Cu, and Cr showed higher percentages in the inert fraction. The order of mobility of the metals was Cd (66 %) > Pb (65 %) > Zn (59 %) > Ni (57 %) = Cr (57 %) > Cu (56 %). Possible toxicity related to these metals was examined using the risk assessment code, and by comparing the chemical data with sediment quality guideline ERL-ERM values. Results obtained using the two methods were in agreement, and showed low to medium risk for all metals, indicating that adverse effects on aquatic biota should rarely occur.     

铅锌冶炼废水处理后沉渣重金属元素特征与环境活性研究

通过扫描电子显微镜与X射线衍射仪分析、BCR法三步连续提取及元素化学分析,对铅锌冶炼废水处理后沉渣中重金属的赋存状态、环境活性进行研究。结果表明,沉渣中主要毒害元素为Zn、Pb、Mn、Cd和Cu,且以非晶态存在,其含量分别为62350、29530、7650、4530和830 mg/kg。渣中Zn和Cd酸可提取态所占比例较大,分别为37.72%和34.44%; Mn的可还原态相对含量很高,达到49.67%;Zn和Pb的可氧化态含量较高,分别占全量的34.16%、34.68%;Pb和Cu的残渣态含量较高,分别占全量的39.72%和61.69%。     

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.     

Fractionation and ecotoxicological implication of potentially toxic metals in sediments of three urban rivers and the Lagos Lagoon,Nigeria, West Africa

The potential environmental impact of sediment-bound Cd, Cr, Cu, Pb and Zn in three trans-urban rivers in Lagos state and in the Lagos Lagoon was assessed by use of the modified Community Bureau of Reference (BCR) sequential extraction. The quality of the data was checked using BCR CRM 143R and BCR CRM 701. Good agreement was obtained between found and certified/indicative values. Of the rivers, the Odo-Iyaalaro, was generally the most contaminated and the Ibeshe the least. Higher concentrations of metals were generally found in the dry season compared to the wet season. Cadmium and Zn were released mostly in the acid exchangeable step of the sequential extraction, indicating that they have the greatest potential mobility and bioavailability of the analytes studied. Chromium and Cu were associated mainly with the reducible and oxidisable fractions, and Pb predominantly with the reducible and residual fractions. Sediments with the highest pseudototal analyte concentrations also released higher proportions of analytes earlier in the sequential extraction procedure. The study suggests that, during the dry season, potentially toxic metals (PTM) may accumulate in sediments in relatively labile forms that are released and can potentially be transported or bioaccumulate in the rainy season. Application of risk assessment codes and Hankanson potential risk indices indicated that Cd was the element of greatest concern in the Lagos Lagoon system. The study indicated that there is a need to strengthen environmental management and pollution control measures to reduce risk from PTM, but that even relatively simple strategies, such as seasonal restrictions on dredging and fishing, could be beneficial.     

Origin of lead associated with different reactive phases in Scottish upland soils: an assessment made using sequential extraction and isotope analysis

Soil samples (0-25 cm) have been taken annually since 1991 from three protected plots set up at an upland location at Glensaugh in Aberdeenshire, Scotland. The soils were analysed using the original BCR sequential extraction procedure and the lead isotopic composition was determined in each of the fractions, as well as the unfractionated soil using thermal ionisation mass spectrometry (TIMS). The lead concentrations in all the soils, including those well away from the road, were much higher than typical background values indicating that the whole area has been subject to deposition of anthropogenic lead. The distribution of lead between the different fractions was similar for the two non-roadside soils with most lead present in the oxidizable fraction. Although most lead in the roadside soil was also present in the oxidizable fraction, a substantial proportion (about 10%) was in the easily soluble fraction suggesting that roadside lead could be more mobile than lead in the other soils. Good reproducibility was obtained for the isotope analyses in all the fractions. The ratios calculated for the bulk soil from the ratios in the individual fractions agreed very closely with those measured directly in the unfractionated soil thereby demonstrating both reproducibilty and accuracy. The lowest (206)Pb/(207)Pb ratios were found in the roadside soil consistent with the recent deposition of petrol lead. The (206)Pb/(207)Pb ratios in all fractions of the other soils fell into a narrow band and it was necessary to use (204)Pb ratios to differentiate between lead in the extractable fractions and lead in the residual component. It is probable that lead in the non-roadside soils was deposited a considerable time ago and is characterised by a relatively high (206)Pb/(207)Pb ratio. Use of the (204)Pb ratios showed that the residual components in each of the three soils were isotopically distinct.     

Experimental photochemical release of organically bound aluminum and iron in three streams in Maine, USA

In the present study, the BCR (Community Bureau of Reference) sequential procedure has been applied to determine the zinc partition in sediments taken from a river situated in the Southwest of Romania, in a region subject of intense mining activities. The sampling was performed during three sampling expeditions, organized in the spring, summer, and autumn, 2007. The zinc concentration in different fractions was normalized, its concentration being related to the concentrations of some metals (such as Al or Fe) that are naturally present in sediments. The zinc-contaminated sediments from the investigated area have been evaluated by means of combining the analysis data from the BCR sequential extraction with the normalization to the Al content. The most important zinc collector in the samples taken during the three sampling expeditions is the easily soluble fraction, next being amorphous iron and manganese hydrated oxides fraction, followed by organic matter fraction.