Evaluation of metals in several varieties of sweet potatoes (Ipomoea batatas L.): comparative study

Sweet potatoes are a staple in the diet of some people and an excellent source of minerals. Metal monitoring in food, like sweet potatoes, provides basic information on safety aspects in regulatory processes as well as nutritional values. One hundred five samples of three varieties of sweet potatoes were randomly obtained from supermarkets, farmers markets, and farmers' plots in Tenerife (Canary Islands, Spain). The edible portion (pulp) was the only part considered for analysis. Flame atomic absorption spectrometry was used to determine the contents of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn), while the levels of chromium (Cr), nickel (Ni), cadmium (Cd), and lead (Pb) were determined using graphite furnace atomic absorption spectrometry. The mean concentrations were 500 Na, 4409 K, 564 Ca, 609 Mg, 1.291 Cu, 6.554 Fe, 2.324 Mn, 2.348 Zn, 0.028 Cr, 0.048 Ni, 0.001 Cd, and 0.003 Pb mg/kg, respectively. Potassium presented the highest contents in all varieties of sweet potatoes. Iron was the most abundant microelement. The orange fleshed sweet potato variety offered greater nutritional contributions to the recommended intakes than the rest of the varieties studied. The estimated mean daily intake of Ni (0.72 mg/day) detected in our samples was highly consistent with other studies. Average daily intakes of Cd (0.015 μg/day) and Pb (0.045 μg/day) were below toxicological reference values. In conclusion, the levels of Cd and Pb detected in the sweet potatoes analyzed do not represent any toxicological risk to consumers.     

Monitoring of trace elements in honey from the Republic of Macedonia by atomic absorption spectrometry

Contents of Zn, Cu, Fe, Mn, Cd, Na, K, Ca and Mg in 123 honey samples from different regions of the Republic of Macedonia were determined by atomic absorption spectrometry. A microwave digestion system was applied for digestion of the samples. The mean content for the elements determined was found to be: 2.252, 0.696, 1.885, 1.752, 0.004, 29.52, 984.8, 40.11, 18.24 mg kg(-1) for Zn, Cu, Fe, Mn, Cd, Na, K, Ca and Mg, respectively. Based on a comparison of statistical parameters, the spatial distribution of particular elements in Macedonian honey and the results of factor analysis, two natural and one anthropogenic geochemical associations were identified. The natural geochemical associations (Mg, Mn, Ca, K and Fe, Zn, Ca, -K, -Na) are influenced mainly by lithology. The anthropogenic associations (Cd and -Cu) are mostly a result of metallurgical activities, namely lead production in the town of Veles.     

Element content of propolis collected from different areas of South Spain

The aim of this work is to determine the content of essential and toxic elements in 25 raw propolis samples, when considering pollution agents and geographical and botanical factors. The microwave-assisted digestion was the most reliable and accurate method for determination of inorganic elements in propolis samples. The results were obtained using certified reference materials in a good agreement with certified values. Inductively coupled plasma atomic emission spectroscopy was used for the determination of 23 macro- and microelements (Ag, Al, As, B, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Sb, Se, Si, Sn, and Zn). A Mercury analyzer was also utilized for the detection of the total Hg. Among the analyzed metals, Ca, K, Mg, Zn, Si, S, Fe, Al, P, and Na were found to be the most predominant. Heavy metals (As, Cd, Hg, and Pb) were determined in minimal concentration, and Pb was the highest mean contained toxic (<3.80 mg/kg), without influence on provisional tolerable weekly intake values. The method can be applied for routine analysis and quality and environmental pollution controls of toxic elements in propolis samples. The results obtained indicate no pollution of the collection areas and naturally high concentration of Al (460?±?62.2 mg/kg).     

抚顺市PM10中元素分布特征及来源分析

为了确定抚顺市PM10中元素的浓度特征及其来源,于2006—2007年的采暖季、风沙季和非采暖季在抚顺市的6个采样点采集PM10样品,并用等离子体原子发射光谱法(ICP-AES)测定样品中Ti、Al、Mn、Mg、Ca、Na、K、Cu、Zn、As、Pb、Cr、Ni、Co、Cd、Fe、V等17种元素的含量。结果表明,Al、Mg、Ca、Na、K、Mn、Fe等地壳元素在17种元素中占有较大比重,全年平均达到97.0%。富集因子分析结果表明,Cu、Zn、Pb、Cr、Co、Cd等元素在各季和各采样点明显受到人为活动影响,是典型的污染元素。主因子分析结果显示,土壤风沙尘、建筑尘、燃煤尘、道路扬尘、机动车尾气排放、金属冶炼、锰、铜、钛工业源是抚顺市PM10中元素的主要来源。     

Assessment of background levels of trace metals in water and soil from a remote region of Himalaya

Selected trace metals were estimated by atomic absorption spectrometry in the water and soil samples collected from the remote region of Himalaya. The soil samples were analysed for soluble and acid extractable fraction of trace metals. In water samples, Ca, Na, Mg and K emerged as dominant contributors, whereas, Ca, Na, K, Mg, Fe and Pb were estimated at comparatively higher levels in the water extract of the soil. In case of acid extract of the soil samples, Ca, K, Fe, Mg, Mn and Na were found at elevated concentrations. Based on mean levels of the metals, following decreasing concentration order was observed in water samples: Ca > Na > Mg > K > Pb > Co > Cu > Zn > Mn > Cr > Fe > Cd > Li, however, in the acid extract of the soil, following order was noted: Ca > K > Fe > Mg > Mn > Na > Pb > Zn > Cr > Li > Cu > Co > Cd. The correlation study revealed appreciably diverse mutual relationships of trace metals in the water and soil samples. The multivariate cluster analyses exhibited divergent apportionment of trace metals in water and soil samples. Among the trace metals, Cd, Pb, Li, Zn, Cr, Cu, Mn and Co exhibited extreme to significant anthropogenic enrichment in the soil samples, while the rest of the metals were mostly contributed by the natural processes.     

Chthamalus montagui as biomonitor of metal contamination in the northwest coast of Portugal

The concentrations of seven metals (Cd, Cr, Cu, Fe, Mn, Ni and Zn) were determined in coastal seawaters and soft and hard tissues of the barnacle Chthamalus montagui from the northwest coast of Portugal to assess the potential use of C. montagui as biomonitor of metal contamination. The results of this study showed that C. montagui soft tissues can be used for monitoring metal bioavailabilities in these coastal seawaters: (1) there were significant correlations (p?相似文献   

Mineral contents and proximate composition of Pistacia vera kernels

The mineral contents of Pistacia vera kernels were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The minimum and maximum values of K, P, Ca, Mg, and S elements ranged from 6,333 to 8,064 mg/kg, 3,630 to 5,228 mg/kg, 1,614 to 3,226 mg/kg, 1,716 to 2,402 mg/kg, and 1,417 to 1,825 mg/kg, respectively. In addition, the mean values of Fe, Zn, Cu, Mn, B, Mo, Cr and Ni elements were determined as 42.48, 20.52, 12.81, 7.48, 11.31, 0.106, 0.511 and 1.67 mg/kg, respectively. Ash levels of kernels were found between 2.28 % (Urfa) and 2.79 % (Halebi). In addition, crude oil and protein contents were determined between 48.8 % (Halebi) to 55.3 % (Siirt) and 23.33 % (Uzun) to 27.16 % (Halebi), respectively.     

Major and trace element contents in apples from a cultivated area of central Greece

Forty-two soil and apple samples from central Greece were collected and analyzed with regards to the content in major (Ca, Fe, K, Mg, Na, P, and S) and trace elements (As, B, Ba, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sr, Ti, and Zn). Soil samples were analyzed by inductively coupled plasma atomic emission spectrometry, while for the apples inductively coupled plasma mass spectrometry was implemented. Several elements such as As, B, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se, Ti, and Zn, represent high concentrations in apples from the study area. These relatively high concentrations may be a consequence of the local geology, along with the excessive application of agricultural products such as fertilizers and agrochemicals.     

Determination of heavy metals and metals levels in five fish species from I??kl? Dam Lake and Karaca?ren Dam Lake (Turkey)

The concentrations of heavy metals and metals (Zn, Pb, Bi, Cd, Ni, Co, Fe, Mn, Mg, Cu, Cr, Ca, Sr, Na, Li, K) were measured in muscle of five species Cyprinus carpio (from I??kl? dam), Scardinius erythrophthalmus (from I??kl? dam), Tinca tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), Carassius carassius (from Karaca?ren dam) caught from I??kl? and Karaca?ren. The highest metal was Na (466.95 μg/g) in C. carassius, while the lowest levels were Fe (0.37 μg/g) and Cu (0.37 μg/g) in C. carpio from I??kl? dam. The mean concentrations μg/g d.w. some of heavy metals in muscle of C. carpio (from I??kl? dam), S. erythrophthalmus (from I??kl? dam), T. tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), C. carassius (from Karaca?ren dam) were as follows: Cd 2.00-2.10-1.95-2.06-2.27, Zn 4.36-2.64-13.13-13.33-24.47, Pb 1.65-1.24-1.90-2.37-2.41, Co 2.46-2.37-2.48-2.58-2.80, Mg 138.51-154.35-218.59-204.58-202.16, Fe 0.37-2.62-3.17-3.01-12.33, respectively.     

Determination of heavy metal contents in some freshwater fishes

The concentrations of heavy metals in tench, pike-perch, and common carp fish caught in four different seasons from Damsa dam lake (Nev?ehir) were determined. Heavy metal contents of fishes changed depending on seasons. The highest Al (20.894 mg/kg) in tench was established in winter, and the lowest Al (1.605 mg/kg) was determined in summer. Fe content of tench fish changed between 112.906 mg/kg (autumn) and 31.207 mg/kg (spring). In addition, Zn contents of tench were found between 36.0323 mg/kg (summer) and 430.586 mg/kg (winter). The results indicate that concentrations of Cu of tench varied from 0.1934 mg/kg (winter) to 15.422 mg/kg (autumn). Results indicate that concentrations varied from 2.923 mg/kg (autumn) to 32.078 mg/kg (summer) with a mean of 11.1893 mg/kg for Al; 0.2483 mg/kg (spring) to 3.3088 mg/kg (autumn) with a mean of 1.6189 mg/kg for Ni; 0.5325 mg/kg (spring) to 0.845 mg/kg (autumn) with a mean of 0.7234 for Pb; and 7.0464 mg/kg (winter) to 253.686 mg/kg (summer) with a mean of 133.6348 for Zn. In common carp, Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Se, Ga, and Te contents were determined as 3.9623 mg/kg; 0.1293, 0.2336, 0.0526, 0.1543, 4.2406, 0.726, 1.797, 0.6216, 6.8536, 0.1783, 0.7876, and 0.371 mg/kg in autumn, respectively.     

Spatial distribution of trace metals (Cd, Pb, Hg, Cu, Zn, Fe and Mn) and oligo-elements (Mg, Ca, Na and K) in surface sediments of the Gulf of Tunis (Northern Tunisia)

The purpose of this paper is to evaluate the levels and spatial distribution of trace metals (Cd, Pb, Cu, Hg, Zn, Fe, and Mn), oligo-elements (Mg, Ca, Na and K), total organic carbon (TOC), and total nitrogen (TN) in the fine fraction of surface sediments collected from 38 stations in Gulf of Tunis (Mediterranean Sea, Northern Tunisia) between 2004 and 2005. The results showed that metals, oligo-elements, TOC, and TN concentrations in the sediments of the Gulf of Tunis are generally low compared to those found in other similar coastal marine areas. The spatial distribution of metals showed areas of major accumulation of Pb, Cd, Cu, Fe, and Zn in the central area of the Gulf and near the Mejerda River. The marine currents are influencing factors on metal accumulation in sediments. The principal component analysis applied to our elemental analytical results showed that there is a positive correlation between Fe, Zn, Cu, and Pb. These metals have a stronger affinity with site connection in the sediments than Ca and Mn.     

Monitoring results for organochlorine pesticides in soil and water from selected obsolete pesticide stores in Pakistan

Seasonal changes in micromineral and macromineral concentrations in tissues of shrimp (Parapenaus longirostris) from Marmara Sea were measured for a 1-year period by using inductively coupled plasma mass spectrometer. The contents of investigated minerals in shrimp were found to be in the range of 0.374–0.716 mg/kg for Hg, 0.526–1.286 mg/kg for Se, 0.007–0.098 mg/kg for Cd, 0.197–0.230 mg/kg for Pb, 5.194–7.600 mg/kg for Cu, 11.090–17.707 mg/kg for Zn, 22.128–38.850 mg/kg for Al, 61.769–88.437 mg/kg for Fe, 0.262–0.368 mg/kg for As, 0.081–0.249 mg/kg for Co, 0.850–1.459 mg/kg for Mn, 0.316–0.507 mg/kg for Ni, 0.032–0.107 mg/kg for Sn, 1.262–1.502 mg/kg for Cr, 2,813.770–3,317.819 mg/kg for Na, 3,702.230–4,479.648 mg/kg for K, 495.782–650.280 mg/kg for Mg, 790.407–1,016.112 mg/kg for Ca, 2,685.873–3,657.658 mg/kg for P, and 0.454–0.942 mg/kg for I. The levels of Hg found in autumn were higher than maximum levels proposed by the European legislation.     

Assessment of metal pollution in urban road dusts from selected highways of the Greater Toronto Area in Canada

Over the last several decades, there has been increased attention on the heavy metal contamination associated with highways because of the associated health hazards and risks. Here, the results are reported of an analysis of the content of metals in roadside dust samples of selected major highways in the Greater Toronto Area of Ontario, Canada. The metals analysed are lead (Pb), zinc (Zn), cadmium (Cd), nickel (Ni), chromium (Cr), copper (Cu), manganese (Mn), calcium (Ca), potassium (K), magnesium (Mg) and iron (Fe). In the samples collected, the recorded mean concentrations (in parts per million) are as follows: Cd (0.51), Cu (162), Fe (40,052), Cr (197.9), K (9647.6), Mg (577.4), Ca (102,349), Zn (200.3), Mn (1202.2), Pb (182.8) and Ni (58.8). The mean concentrations for the analysed samples in the study area are almost all higher than the average natural background values for the corresponding metals. The geo-accumulation index of these metals in the roadside dust under study indicates that they are not contaminated with Cr, Mn and Ca; moderately contaminate with Cd and K; strongly contaminated with Fe and Mg; strongly to extremely contaminated with Ni and Pb; and extremely contaminated with Cu and Zn. The pollution load index (PLI) is used to relate pollution to highway conditions, and the results show that PLI values are slightly low at different samples collected from Highways 401 and 404 and high in many samples collected from Highway 400 and the Don Valley Parkway. Highway 400 exhibits the highest PLI values.     

河南省典型城市PM2.5无机元素污染特征及来源分析

分析2012年采暖季和非采暖季郑州市、洛阳市和平顶山市大气细颗粒物(PM_(2.5))样品中22种无机元素含量和污染特征,采用富集因子法、因子分析法研究当地PM_(2.5)中无机元素来源。结果表明:3个城市PM_(2.5)中无机元素总量在采暖季均高于非采暖季,不同季节占PM_(2.5)质量浓度的比例为1.7%~3.6%。Al、Na、Ca等地壳元素在PM_(2.5)中占比与PM_(2.5)浓度呈负相关关系,而Zn、Pb、Cu等人为源元素的占比随PM_(2.5)浓度增加无明显下降趋势。3个城市PM_(2.5)中Se、Cd、Br的富集因子高于1 000,Pb、Zn、Cu的富集因子为100~1 000,Co、Sc、Cr、Ni、As、Mn、Ba的富集因子为10~100,说明这些元素主要来源于人为源。13种人为源元素质量浓度在22种元素中占比为18.9%~26.3%,K、Fe、Ca、Al等4种元素占比为67.9%~76.1%。因子分析结果表明:3个城市无机元素来源组成有很大相似性,主要来源于燃煤、机动车、扬尘和建筑尘等,但Ni、Co、Sr、Ba还有来自其他排放源的贡献。     

Efficacy of a Biomonitoring (Moss Bag) Technique for Determining Element Deposition Trends on a Mid-Range (375 Km) Scale

National networks detect multi-state trends in element deposition using direct measurement methods. Biomonitoring techniques have been used to examine deposition in local areas and around point sources. We sought to determine the efficacy of a moss bag technique to detect element deposition trends on a mid-range (state) scale, and to compare these results with those of the National Acid Deposition Program/National Trends Network (NADP/NTN, 1999). We sampled heavy metals, sulfur, and nitrogen deposition (21 elements) using mesh bags containing Sphagnum russowii at nine sites, over a 375 km transect crossing southern Wisconsin (upper Midwest, USA). We found statistically significant trends of decreasing deposition in a northwesterly direction for 13 elements: Al, B, Ca, Cd, Co, Cu, Cr, Fe, Mg, Mn, Ni, S, and Zn. Six of these have moderate to large changes in concentration (14–37%). The trends for Ca, Mg, and S are consistent with regional deposition patterns in 1998 isopleth maps from the NADP/NTN (1999) which are derived from a sampling array far less dense than the transect sites. This national network indicates that Ca and Mg increase to the southeast, beyond Wisconsin borders. The fact that the present study demonstrates strong correlations between both of these elements (Ca and Mg) and Al, B, Cr, Cu, Fe, Mn, Ni, and Zn (mean r for all correlations = 0.75, p < 0.02) implies that these correlated elements also increase to the southeast in neighboring states.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

Assessment of trace elements in the shell layers and soft tissues of the pearl oyster Pinctada radiata using multivariate analyses: a potential proxy for temporal and spatial variations of trace elements

Concentrations of trace elements (Cd, Cu, Ni, Pb, V, and Zn) were determined in the soft tissues (adductor muscle and gills) of the pearl oyster Pinctada radiata and surficial sediments from two sampling sites located in the northern part of the Persian Gulf by Graphite Furnace Atomic Absorption Spectrophotometer (GFAAS). Moreover, the levels of Li, Mg, Al, Mn, Fe, Cu, Sr, Ba, Pb, and Zn were measured in two shell layers (prismatic and nacreous) using Laser Ablation Inductively Coupled Plasma Mass Spectrometer (LA-ICP-MS). There were significant differences between the sampling sites with regard to mean concentrations of Cu, Mn, and Al in the prismatic layers of the shells. But in terms of the soft tissues, only in the case of Ni accumulation in the muscle significant differences between the sites could be observed. No significant differences could be found between the sites from the elements concentrations in the sediments point of view. The levels of Cd, Cu, Ni, and Zn in the gills were markedly higher than those in the muscle. Concentrations of Mn, Mg, Li, and Cu in the prismatic layer were significantly higher than in the nacreous but the reverse case could be found for Sr. The patterns of metal occurrence in the selected tissues, shell layers, and sediments exhibited the following descending order: Zn, Ni?>?Cd, Cu?>?V, and Pb and Zn, Ni, Cd?>?Cu, V, and Pb for muscle and gills, respectively; Zn?>?Cu, Ni, Pb, Cd, and V for sediments; Mg?>?Sr, Mn, Li, Al, Fe, Ba, Cu, Pb, and Zn for the prismatic layer; and Sr, Mg?>?Mn, Al, Fe, Li, Ba, Cu, Pb, and Zn for the nacreous layer. In most cases, the temporal variations of the elements levels in the prismatic layer were clearer than those in the nacreous layer (especially for Li, Mg, Mn, Pb, and Fe). Comparison of the gained data from this study with the other relevant researches shows that in most cases the levels of the elements in this investigation either fell within the range for other world areas or were lower. Generally, it can be concluded that the shell (especially prismatic layer) of P. radiata can be considered as a suitable proxy for temporal and spatial variations of the trace elements (and probably some environmental parameters) in the study area.     

Comparative evaluation of some macro- and micro-element and heavy metal contents in commercial fruit juices

Micro- and macro-element contents of several commercial fruit juices purchased from marked were determined by inductively coupled plasma atomic emission spectroscopy. Among the minor elements determined, Zn, Cu, Mn, Mo, Co, Cd and Ni were found to be lover. Major mineral contents of fruit juices were established as Ca, K, Mg and P. The potassium contents of fruit juices were determined at the higher levels. K contents of fruit juices ranged between 475 mg/kg (B apricot) and 1478 mg/kg (B peach). In addition while Ca contents of fruit juices change between 19.3 mg/kg (E cherry) and 81.8 mg/kg (C orange), Mg contents ranged at the levels between 23.7 mg/kg (A apricot) and 65.4 mg/kg (D orange). Generally Ca and contents of peach, orange and apricot juices that belong to A and D companies were determined at the high levels.     

Goose barnacle Pollicipes pollicipes as biomonitor of metal contamination in the northwest coast of Portugal

The main objective of this work was to assess the potential use of goose barnacle Pollicipes pollicipes as biomonitor of metal contamination in northwest (NW) coast of Portugal. The concentrations of Cd, Cr, Cu, Fe, Mn, Ni and Zn were determined in coastal seawaters and tissues of P. pollicipes, which allowed establishing correlations between metals in coastal seawaters and P. pollicipes and calculating metal bioaccumulation factors (BAFs). The results of this study showed that P. pollicipes soft tissues can be used for monitoring metal contamination in these coastal seawaters: (1) there were significant correlations (p??0.05); (2) soft tissues were sensitive to spatial variations of metal bioavailabilities and their concentrations ranged 0.70-2.22?mg?Cd?kg(-1), 0.49-1.40?mg?Cr?kg(-1), 1.37-2.07?mg?Ni?kg(-1), 2.4-3.3?mg?Cu?kg(-1), 5-59?mg?Mn?kg(-1), 134-578?mg?Fe?kg(-1)and 728-1,854?mg?Zn?kg(-1); (3) mean logarithmic bioaccumulation factors (log BAF) of Fe, Cd and Zn were higher, 5.57, 5.47 and 4.41, respectively, than mean log BAFs of Cr, Mn, Cu and Ni, 4.18, 4.14, 3.98 and 3.51, respectively. In contrary, P. pollicipes shell plates were not considered ideal material to monitor metal bioavailabilities in these coastal seawaters. Regarding the very high concentrations of Zn obtained in the coastal seawaters and P. pollicipes soft tissues, the NW coast of Portugal should be classified as "Class III/IV - Remarkably/Highly Polluted".     

Chemical Composition and Sources of PM10 and PM2.5 Aerosols in Guangzhou, China

Aerosol samples of PM10 and PM2.5 are collected in summertime at four monitoring sites in Guangzhou, China. The concentrations of organic and elemental carbons (OC/EC), inorganic ions, and elements in PM10 and PM2.5 are also quantified. Our study aims to: (1) characterize the particulate concentrations and associated chemical species in urban atmosphere (2) identify the potential sources and estimate their apportionment. The results show that average concentration of PM2.5 (97.54 μg m⁻³) in Guangzhou significantly exceeds the National Ambient Air Quality Standard (NAAQS) 24-h average of 65 μg m⁻³. OC, EC, Sulfate, ammonium, K, V, Ni, Cu, Zn, Pb, As, Cd and Se are mainly in PM2.5 fraction of particles, while chloride, nitrate, Na, Mg, Al, Fe, Ca, Ti and Mn are mainly in PM2.5-10 fraction. The major components such as sulfate, OC and EC account for about 70–90% of the particulate mass. Enrichment factors (EF) for elements are calculated to indicate that elements of anthropogenic origins (Zn, Pb, As, Se, V, Ni, Cu and Cd) are highly enriched with respect to crustal composition (Al, Fe, Ca, Ti and Mn). Ambient and source data are used in the multi-variable linearly regression analysis for source identification and apportionment, indicating that major sources and their apportionments of ambient particulate aerosols in Guangzhou are vehicle exhaust by 38.4% and coal combustion by 26.0%, respetively.