稀土修饰的Co/Hβ催化剂催化分解N_2O

以Hβ分子筛为载体,采用浸渍法制备了一系列以钴为主活性组分,稀土元素为助剂的CoM/Hβ（M=La、Ce、Pr、Nd）催化剂,考察了在含氧条件下直接催化分解N2O的性能.采用X射线衍射、热重-质谱联用系统、H2-TPR、NH3-TPD等方法对催化剂进行了表征.XRD结果表明,Co物种主要以Co3O4尖晶石形态存在.NH3-TPD结果表明,催化剂活性与催化剂的酸性有关.活性评价结果显示,稀土助剂的添加使催化剂活性得到改善,其中以Pr为助剂的催化剂活性最好,N2O转化率达到95%时的反应温度为398℃.     

ZrO2负载过渡金属氧化物催化剂对CO＋NO（O2）反应的影响

本文运用固定床微反技术考察了Ｃｕ,Ｆｅ,Ｍｎ,Ｃｒ,Ｃｏ和Ｎｉ负载（ＺｒＯ２载体）氧化物对ＣＯ＋ＮＯ（Ｏ２）反应的催化活性。研究了ＮＯ和ＣＯ在不同比例时,催化剂对Ｎ２Ｏ和Ｎ２生成的影响。结果表明,在ＮＯ＋ＣＯ反应中,ＮＯ和ＣＯ的比例对催化剂活性和Ｎ２Ｏ,Ｎ２生成均有明显的影响,ＣｕＯｘ／ＺｒＯ２催化剂的活性最高;Ｎ２Ｏ是ＮＯ＋ＣＯ反应的中间产物,低温或ＮＯ过量时有利于生成Ｎ２Ｏ,高温或ＮＯ不足时有     

过渡金属催化剂上CO还原NO反应性能的研究

在一系列负载型过渡金属催化剂上考察了ＣＯ－ＮＯ和ＣＯ－Ｏ２的反应性能。结果表明，催化剂的ＣＯ－Ｏ２反应活性高于ＣＯ－ＮＯ反应，催化剂表面ＮＯ解离是ＣＯ－ＮＯ反应的速率控制步骤。低温反庆有利于Ｎ２Ｏ的生成，高温有利于Ｎ２的生成。     

树脂负载α-FeOOH异相光Fenton降解水中己烷雌酚

以Amberlite200树脂为载体,在Fe(NO3)3-HNO3体系中恒温水解制备了负载型催化剂α-FeOOH/Resin,以己烷雌酚(HEX)为目标化合物,研究了α-FeOOH/Resin的异相Fenton催化性能.结果表明,α-FeOOH/Resin异相Fenton反应能够有效降解水中的HEX,紫外光和H2O2的协同作用很大程度地提高了降解效率;pH值的降低或初始H2O2浓度的提高,均能增加HEX的降解速率;在中性条件下,HEX的光Fenton降解过程中,溶出的铁元素对降解贡献不大,异相Fenton反应起主导作用;催化剂重复使用后仍具有较好的催化活性和机械强度,说明铁在其表面负载牢固,催化剂具有一定的实用性.     

Catalytic activity of noble metal nanoparticles toward hydrodechlorination: influence of catalyst electronic structure and nature of adsorption

In this study, stabilized Pd, Pt and Au nanoparticles were successfully prepared in aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping agent. These metal nanoparticles were then tested for catalytic hydrodechlorination toward two classes of organochlorinated compounds (vinyl polychlorides including trichloroethylene (TCE), tetrachloroethylene (PCE), and alkyl polychlorides including 1,1,1-trichloroethane (1,1,1-TCA), and 1,1,1,2-tetrachloroethane (1,1,1,2-TeCA)) to determine the rate-limiting steps and to explore the reaction mechanisms. The surface area normalized reaction rate constant, k_SA, showed a systematic dependence on the electronic structure (the density of states at the Fermi level) of the metals, suggesting that adsorption of organochlorinated reactants on the metal catalyst surfaces is the rate-limiting step for catalytic hydrodechlorination. Hydrodechlorination rates of 1,1,1-TCA and 1,1,1,2-TeCA agreed with the bond strength of the first (weakest) dissociated C-Cl bond, suggesting that C-Cl bond cleavage, which is the first step for dissociative adsorption of the alkyl polychlorides, controlled the catalytic hydrodechlorination rate. However, hydrodechlorination rates of TCE and PCE correlated with the adsorption energies of their molecular (non-dissociative) adsorption on the noble metals rather than with the first C-Cl bond strength, suggesting that molecular adsorption governs the reaction rate for hydrodechlorination of the vinyl polychlorides.     

Formic acid fractionation towards highly efficient cellulose-derived PdAg bimetallic catalyst for H2 evolution

The present work, in which cellulose isolated from formic acid fractionation (FAC) is decorated with polyetherimide (PEI) to attain highly efficient cellulose-derived PdAgbimetallic catalyst (PdAg-PEI-FAC), has been investigated, and the catalyst properties are characterized by XRD, XPS, BET, ICP-AES and HAADF-STEM. The as-obtained Pd3.75Ag3.75-PEI-FAC exhibits excellent catalytic performance for H2 evo-lution from a sodium formate-free formic acid (FA) aqueous medium at ambient temperature and the turnover frequency (TOF) reaches a high value of 2875 h-1, which is superior to most of the previously reported Pd-based heterogeneous catalysts supported on a carbon matrix in the literature. The remarkable catalytic activities of PdAg-PEI-FAC result from high dispersion Pd and synergistic effects between the PdAg bimetallic system. Furthermore, the amide (-NH) group in PEI coated on cellulose acting as a proton scavenger efficiently improves the catalytic property of catalyst. In addition, the critical factors affecting H2 release, such as FA concentration, reaction temperature, PdAg compositions and support matrix type, are also evaluated. Based on the experimental results, the probable three-step mechanism of H2 evolution from FA over Pd3.75Ag3.75-PEI-FAC is proposed. In the end, the activation energy (Ea) of Pd3.75Ag3.75-PEI-FAC catalyst is calculated to 53.97 kJ mol-1, and this catalyst shows unique robustness and satisfactory re-usability with no loss of catalytic activity after five recycles. The findings in this work provide a novel routine from lignocellulose fractionation towards cellulose-derived catalyst for H2 evolution.     

六铝酸盐负载CuO催化还原NO性能

采用共沉淀法制备了LaAl12O19六铝酸盐载体,采用等体积浸渍法制备了不同负载量的CuO/LaAl12O19催化剂,并对其进行了XRD、H2-TPR和BET表征,考察了催化剂对CH4选择催化还原NO的性能.结果表明,CuO的负载并未改变六铝酸盐载体的结构,Cu在载体上以Cu2+的形式存在,活性组分CuO与载体LaAl12O19之间存在协同作用;CuO/LaAl12O19催化剂对CH4选择催化还原NO表现出良好活性,所制备的催化剂均能使NO的转化率达到99%;其中负载量为1.0 wt%的CuO/LaAl12O19催化剂的活性最好,完全反应温度T99%为560℃,且在80 h稳定性试验中表现出了良好的高温活性和热稳定性.     

Ce0.7Zr0.3O2纳米棒的制备及其对柴油车尾气碳颗粒的催化净化性能

本研究以硝酸铈、硝酸锆为原料使用溶剂热合成法,制备了CeO₂-ZrO₂纳米棒催化剂(Ce_0.7Zr_0.3O₂(NR)),并用于柴油车尾气碳颗粒催化净化.催化活性检测证实:Ce_0.7Zr_0.3O₂(NR)纳米棒催化剂可有效净化柴油车尾气碳烟颗粒.在Ce_0.7Zr_0.3O₂(NR)存在下,碳颗粒净化率为10%、50%和90%时,所需温度分别仅为375℃、414℃和455℃,比商用Ce_0.7Zr_0.3O₂和Ce0.3Zr0.7O2催化剂性能更优.采用氮吸附-脱附、X射线光电子能谱(XPS)、H2程序升温还原(H₂-TPR)、X射线衍射(XRD)、拉曼光谱(Raman)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术对催化剂进行表征.XRD和Raman结果证实,Ce_0.7Zr_0.3O₂(NR)主要由立方相CeO₂构成,并掺杂了少量四方相氧化锆.SEM和TEM结果则显示,Ce_0.7Zr_0.3O₂(NR)催化剂颗粒明显由纳米棒堆积而成,特定的纳米形貌会影响其对碳颗粒的催化氧化活性.XPS结果证明Ce_0.7Zr_0.3O₂(NR)催化剂主要具有晶格氧、化学氧和表面吸附氧等氧物种;晶格氧是碳颗粒氧化的活性氧物种,其溢流到催化剂表面可与碳颗粒接触从而提高反应活性;化学氧和表面吸附氧均为表面氧物种,极易与表面固体碳颗粒直接接触,从而可在较低温度下促进碳颗粒的净化.H₂-TPR结果进一步证实了XPS结果,Ce_0.7Zr_0.3O₂(NR)催化剂的低温还原温度比商用Ce_0.7Zr_0.3O₂催化剂更低,且含有更多的易还原氧物种,这些低温易还原氧物种可以在较低温度下参与催化反应,促进柴油车尾气颗粒物的低温催化净化.     

以ZrO2为载体的金属氧化物催化剂对NO还原性能的研究

研究了负载于氧化锆载体上的多种金属氧化物在富氧条件下,以丙烯为还原剂,选择性还原NO的活性,考察了CuO和Ag的负载量与活性关系,CuO和Ag单独负载与共同负载时的催化性能,以及氧气浓度对催化剂活性影响.结果表明:在CuO,MgO,La2O3 ,CoO,Fe2O3 ,MoO3和WO3等七种金属氧化物中,CuO活性最好,NO转化率为47.5%,加入活性组分银可明显提高催化剂的NO还原能力,转化率提高到61%.单独负载银时,催化剂活性较差,NO转化率仅为22.1%.在对氧气浓度的考察中,确定在0.4%NO,0.4?H6的反应气中,氧气的最佳含量为2%.     

氧化铈在非贵金属燃烧催化剂中热稳定性的研究

本文考察了Ｃｅ含量对提高催化剂的热稳定性的作用，并采用Ｘ－射线衍射分析Ｃｅ含量对催化剂活性组成的影响。结果表明，合适的Ｃｅ含量能够提高催化剂的热稳定性，这主要是氧化铈能够阻止ＮｉＣｏ２Ｏ４相的生成，而ＮｉＣｏ２Ｏ４的生成对本系列催化剂的燃烧活性是不利的。实验还表明，在空气气氛下有利于形成ＮｉＣｏ２Ｏ４相，在Ｎ２／Ｈ２Ｏ气氛中不利于ＮｉＣｏ２Ｏ４相的生成。     

Al_2O_3负载Pd-Cu催化剂催化1,2-二氯乙烷加氢脱氯性能

采用共浸渍法制备了一系列Al2O3负载金属Pd、Cu催化剂.通过元素分析（ICP）、氮气吸脱附（BET）、X射线粉末衍射（XRD）、透射电镜（TEM）等技术对催化剂进行了表征,并以1,2-二氯乙烷气相加氢脱氯为探针反应,考察了Pd-Cu/Al2O3催化剂的钯铜比、反应温度、反应时间等因素对催化活性以及反应产物乙烯选择性的影响.结果发现,提高Cu负载量可在催化剂中形成Pd-Cu合金,并促进催化剂对乙烯的选择性.此外,当温度为250℃,Pd、Cu负载量分别为0.78%和1.9%时的Pd-Cu/Al2O3催化剂对1,2-二氯乙烷的催化加氢脱氯效果最佳,最终产物乙烯的选择性可达到80%以上.     

NiFe2O4直接分解二氧化碳成碳循环反应过程结构演变研究

用XRD Rietveld分析法,对共沉淀法制备的NiFe2O4在H2／CO2循环反应中的结构演变进行研究,发现随着循环反应次数的增加,NiFe2O4物相的含量逐渐降低,Fe2Ni1-x物相的含量及其(200)衍射的平均晶粒逐渐增大,并出现Fe3C物相,其含量增长较快．纯NiEe2O4经15次循环反应后,体系中NiFe2O4物相的含量只剩下5％左右,样品基本失去分解CO2的活性．NiFe2O4掺杂4％铬后,明显提高了NiFe2O4骨架结构的稳定性,虽经50次H2／CO2循环反应,体系中NiFe2O4物相含量仍然有20％,分解CO2的活性仍达到初始活性的40％．     

Advances in research on haloalkane dehalogenases and its sulfur mustard degradation function北大核心CSCD

Sulfur Mustard (bis-(2-chloroethyl) sulphide, HD), also known as yperite, is one of the most important blister agents. It could react with a large number of biological molecules with a strong cytotoxicity effect, resulting in blistering, erosion and necrosis of the skin and various tissues. Recently, several classes of microbial enzymes have been found to be able to degrade HD with high catalytic activity but no disadvantages of the common chemical decontamination of HD. Haloalkane dehalogenases (HLDs, EC3.8.1.5) draws great research attention for environmentally friendly decontaminating HD with only nontoxic thiodiglycol produced. In order to provide theoretical reference basis for enzymatic decontamination of HD, this paper reviews the observation and evolutionary relationship, structures, substrate specificities, catalytic properties and potential applications of these HLDs with high catalytic hydrolysis of HD. The analysis shows that these HLDs belonging to the same subfamily have different substrate specificities but similar spatial structures of the catalytic triad contributing to the common SN2 nucleophilic substitution reaction mechanism for catalytic hydrolysis of HD. The paper also suggests that the problems on improving poor stability of HLDs and efficiency of catalytic hydrolysis of HD should be addressed by methods of molecular biology, genetic engineering and immobilized techniques.     

脉冲电晕等离子体降解有毒气体

采用脉冲电晕放电等离子体对化学毒剂模拟剂氯膦酸二乙酯(DECP)进行降解,结果表明,对初始浓度为70 mg·m-3的DECP降解率为96.4%.通过GC-MS和离子色谱分析,其降解产物主要有CHCl2-CH2Cl、CHCl2-CHCl2、二氯膦酸乙酯、HCl和H3PO4,并根据降解产物探讨了等离子体对DECP的降解反应机理.DECP分子中的P—Cl和C—O键断裂促使DECP矿化为H3PO4和HCl,而C—O键断裂形成的乙基与氯自由基反应形成CHCl2-CH2Cl和CHCl2-CHCl2;同时DECP分子中的一个P—O键发生断裂后与氯自由基结合形成了二氯膦酸乙酯.对DECP的反应动力学进行了分析讨论,得到其反应速率常数为0.0516 m.3(W.h)-1.     

半焦负载Na-Fe催化还原NO的研究

在石英固定床反应器上于常压下研究了煤焦负载Na或Fe催化还原NO的反应，同时研究了Na-Fe复合催化剂的催化特性。研究结果表明：Na或Fe催化剂的催化行为差异较大，低温下Na的催化活性高于相同负载量的Fe，而温度较高时，二者的催化活性顺序与低温时相反。Na的催化活性随负载量的增加而迅速增大，而Fe的催化活性随温度的升高增加迅速。在保持相同的负载量下，一定配比的Na－Fe复合催化剂的催化活性高于其中任何单一催化剂的催化活性。在不加其他还原剂的条件下，负载于煤焦上的Na-Fe复合催化剂可有效地催化还原NO，得到了高的还原转化率。复合催化剂高的催化活性预示Na-Fe在制备过程中的相互作用以及催化半焦还原NO的反应中具有协同作用。     

Fabrication of supported acid catalytic composite fibers by a simple and low-cost method and their application on the synthesis of liquid biofuel 5-ethoxymethylfurfural

In this paper, sulfonic groups functionalized annealed bio-based carbon microspheres loaded polytetrafluoroethylene (A-BCMSs-SO3H@PTFE) fibers with high activity, high stability, and easy regeneration were successfully fabricated by a simple method using low-cost raw materials. The characterization results showed that the annealed biomass carbon microspheres derived from waste Camellia oleifera shells were evenly distributed on the polytetrafluoroethylene fibers and the sulfonic groups can be successfully loaded on the surface of annealed biomass carbon microspheres by room temperature sulfonation. Subsequently, the as-prepared A-BCMSs-SO3H@PTFE fibers were applied to the acid-catalyzed synthesis of liquid biofuel 5-ethoxymethylfurfural. The catalytic experiment results indicated that the annealing temperature and time during catalyst preparation have a significant effect on the activity and selectivity of A-BCMSs-SO3H@PTFE fibers. The results of catalytic reaction kinetics showed that the yield of 5-ethoxymethylfurfural can reach more than 60％after 72 h of acid-catalyzed reaction. The stability test showed that the as-prepared A-BCMSs-SO3H@PTFE fibers still maintained a stable acid catalytic activity after four recycles.     

ZrO2掺杂的V2O5/TiO2催化剂表征及催化还原NOx

采用共沉淀法制备出不同锆掺杂量的钛锆复合载体(TiO2-ZrO2),运用XRD和BET研究其微观结构,结果显示钛锆物质的量之比1∶1时复合载体具有最大的比表面积,可达256.01 m.2g-1.以此为载体制备了V2O5/TiO2-ZrO2催化剂,并添加少量CeO2对其改性.采用XRD、BET、H2-TPR、原位FT-IR等手段研究其活性组分的表面分散状态、氧化还原特性和表面酸性.结果显示,V2O5高度分散在载体上;与纯V2O5相比,复合载体上V2O5的还原峰向低温方向发生了偏移;催化剂表面包含了大量的B酸和L酸.模拟氨气催化还原NO(NH3-SCR)的脱硝反应活性测试表明,V2O5/TiO2-ZrO2催化剂具有较好的热稳定性和较宽的活性窗口,少量CeO2的加入提高了催化剂的低温活性.     

V2O5/AC催化剂对氨还原NO的研究

考察了V2O5/AC催化剂对NH3选择催化还原NO的影响，结果表明，以浓硝酸预氧化处理的活性焦为载体对催化剂活性有很大提高，这是由于浓硝酸预氧化后，活性焦表面产生了较多的含氧官能团可能吸附更多的NH3,并且提高了活性组分V2O5的含量，反应气氛中加入SO2后，二都活性都增加，但差异消失，这是由于SO2存在时，反应生成的SO4^2-离子的酸性强于浓硝酸预氧化产生的含氧官能团的酸性，催化剂在使用前经过煅烧和氧化对催化剂活性有很大改善。SO2存在时，V2O5含量为1wt%的催化剂活性提高。     

钴负载MCM-41分子筛催化臭氧氧化水中氯代苯甲酸

通过水热法合成介孔分子筛MCM-41,采用等体积浸渍法制备了Co负载MCM-41分子筛催化剂(Co/MCM-41).小角X-射线粉末衍射(XRD)、紫外-可见漫反射光谱(UV-vis DRS)、N2吸附-脱附等温线及透射电镜(TEM)等对催化剂的成分、结构的表征结果显示,Co/MCM-41保持了纯硅MCM-41有序的介孔结构,钴元素以钴氧化物形式存在,比表面达到772 m.2g-1.将Co/MCM-41分子筛用于催化臭氧氧化水中对氯苯甲酸(p-CBA)的研究,结果表明,在优化条件下(2%负载量和25℃反应温度),催化剂的加入显著改善了TOC去除率,达到84.6%,是单独臭氧氧化的1.6倍.     

Catalytic ozonation performance and surface property of supported Fe3O4 catalysts dispersions

Fe₃O₄ was supported on mesoporous Al₂O₃ or SiO₂ (50 wt.%) using an incipient wetness impregnation method, and Fe₃O₄/Al₂O₃ exhibited higher catalytic efficiency for the degradation of 2,4-dichlorophenoxyacetic acid and para-chlorobenzoic acid aqueous solution with ozone. The effect and morphology of supported Fe₃O₄ on catalytic ozonation performance were investigated based on the characterization results of X-ray diffraction, X-ray photoelectron spectroscopy, BET analysis and Fourier transform infrared spectroscopy. The results indicated that the physical and chemical properties of the catalyst supports especially their Lewis acid sites had a significant influence on the catalytic activity. In comparison with SiO₂, more Lewis acid sites existed on the surface of Al₂O₃, resulting in higher catalytic ozonation activity. During the reaction process, no significant Fe ions release was observed. Moreover, Fe₃O₄/Al₂O₃ exhibited stable structure and activity after successive cyclic experiments. The results indicated that the catalyst is a promising ozonation catalyst with magnetic separation in drinking water treatment.