Evaluation of the economic and environmental impact of converting cropland to forest: a case study in Dunhua county, China

The Sloping Land Conversion Program (also known as "Grain for Green" or the Upland Conversion Program) for converting cropland to forest is one of China's most ambitious environmental initiatives, and is one of the world's largest land-conservation programs with a budget of RMB 337 billion (over US$ 40 billion). Although environmental impacts have played a vital role in the general reasoning and argumentation for forest plantations, environmental impact analyses have often received less attention than economic analyses in the planning of plantation forestry projects. The overall goal of this paper is to evaluate the program's environmental impact considering the farmer's interests and the potential social benefits due to carbon sequestration in different scenarios based on household and field survey data in Dunhua County. Our findings are that: (1) in many cases, the program did not give adequate consideration to land productivity and environmental heterogeneity when selecting plots; (2) more than half of the reforestation plots were on flat cropland (slopes of less than 5 degrees ); (3) in five of the eight townships, net incomes on reforested land were substantially above or below previous crop incomes, raising questions about the efficiency of the allocation of compensation to farmers participating in the program; (4) the potential carbon co-benefit increased the NPV of the program by 5954-7009 RMB/ha. In conclusion, we recommend that more attention should be paid to the quality of reforestation programs rather than just their scale and note that consideration of potential carbon sequestration co-benefits enhances the benefits of cropland conversion programs.     

Adsorption and degradation of triazophos, chlorpyrifos and their main hydrolytic metabolites in paddy soil from Chaohu Lake, China

Triazophos and chlorpyrifos are organophosphorus pesticides (OPs), and their primary hydrolytic metabolites are 1-phenyl-3-hydroxy-1,2,4-triazole (BZC) and 3,5,6-trichloro-2-pyridinol (TCP). In this study, the adsorption and degradation of triazophos, chlorpyrifos, BZC and TCP were investigated in paddy soil from Chaohu Lake, China. Adsorption tests demonstrated that the adsorption of these compounds to soils could be described by the Freundlich equation. Moreover, chlorpyrifos displayed the highest affinity for adsorption, followed by triazophos, BZC and TCP. Degradation of these compounds in non-sterile soil followed first-order exponential decay kinetics, and the half-life (t(1/2)) of these contaminants ranged from 8.40 to 44.34 d. Sterilization of soil decreased the degradation rate, indicating that microorganisms played a significant role in the degradation of these compounds. The values of t(1/2) and K(oc) were fitted to obtain models that could predict the leaching potential of the contaminants from soil. Compared to their parent compounds, BZC and TCP showed high potential for leaching into groundwater. The inoculation of OPs-degrading bacterium (Diaphorobacter sp. GS-1) removed 95.38%, 100% and 100% of triazophos, chlorpyrifos and BZC in paddy soil after 21 d, respectively. The pollution risk of triazophos, chlorpyrifos and BZC could be greatly decreased by inoculating soil with Diaphorobacter sp. GS-1, which decreases the t(1/2) of the contaminants.     

Treatment of risk in environmental impact assessment

Risk assessment and environmental impact assessment have developed as separate traditions. While environmental impact assessment is a broad field that includes all activities that attempt to analyze and evaluate the effects of human and related actions on the environment, risk assessment has been concerned with the relatively well-defined regulatory problems and employs formal quantitative analysis of the probability of specific undesired events, such as cancer. Risk analytic approaches, particularly the explicit treatment of uncertainty, can significantly contribute to environmental assessments. This article discusses the type and sources of uncertainty in environmental assessments, techniques for their quantification, and ways to use uncertainty estimates to calculate probabilities of effects or probabilities of exceeding environmental standards and to determine the need for mitigation or additional research.This article was presented at the International Institute of Applied Systems Analysis, Task Force Meeting on Risk and Policy Analysis under Conditions of Uncertainty, Laxenburg, Austria, November 1985.     

Environmental accounting for waste management: A study of local governments in Australia

Local governments in Australia, especially in large urban areas, have faced a challenge of the growing quantity of waste generated and the diminishing space for waste disposal in recent years. The central government has demonstrated the importance of developing strategies to make full environmental costs and impacts of waste disposal and material recovery accountable for waste management decision-making. However, research into this field is limited. This paper investigates environmental accounting practices in local government waste management. From a survey conducted with local government authorities in New South Wales (NSW) Australia, it is found that overall the level of direct waste flow and activity accounting is higher than the level of hidden and external environmental cost accounting, though local governments tend to identify and use more physical information associated with waste flows and activities than relevant monetary information. External environmental impacts of waste disposal are often overlooked and show the lowest level of practices. The survey results also indicate that urban local governments have taken more environmental information into account than rural local governments, but such difference is not significant between local governments of different sizes. The complexity of waste technical services and operations is confirmed to have a positive and significant effect on the level of environmental accounting for waste management across local governments surveyed.     

A method for assessing environmental risk: A case study of Green Bay,Lake Michigan,USA

The Science Advisory Board of the US Environmental Protection Agency has recommended that risk reduction strategies become the centerpiece of environmental protection. The goal in developing such strategies is to identify opportunities for greatest reduction of ecological risks. This is a perspective that is significantly more comprehensive than the traditional focus on human health risks arising from environmental degradation. The identification of ecological risks upon which environmental protection efforts should be focused requires an ecological risk assessment methodology that is based on anthropogenic stressors affecting an ecosystem and a set of impaired use criteria. A methodology based on this concept is developed and discussed in this article. The methodology requires that risk values be assigned to each ecosystem stressor-impaired use pair that reflect the degree to which the given stressor contributes to ecosystem risk as measured by the given impaired use criterion. Once these data are available, mathematical analyses based on concepts from fuzzy set theory are performed to obtain a ranking of ecosystem stressors. The methodology has been tested by applying it to a case study involving Green Bay of Lake Michigan. A workshop was held in which 11 persons with extensive knowledge of the Green Bay ecosystem determined risk values through a group-consensus process. The analytical portion of the methodology was then used to rank the ecosystem risks (stressors) from several perspectives, including prevention management and remediation management. The overall conclusion of the workshop participants was that the fuzzy set decision model is a useful and effective methodology for differentiating environmental risk.     

Multi-criteria analysis for improving strategic environmental assessment of water programmes. A case study in semi-arid region of Brazil

Multi-criteria analysis (MCA) is a family of decision-making tools that can be used in strategic environmental assessment (SEA) procedures to ensure that environmental, social and economic aspects are integrated into the design of human development strategies and planning, in order to increase the contribution of the environment and natural resources to poverty reduction. The aim of this paper is to highlight the contribution of a particular multi-criteria technique, the analytic hierarchy process (AHP), in two stages of the SEA procedure applied to water programmes in developing countries: the comparison of alternatives and monitoring. This proposal was validated through its application to a case study in Brazilian semi-arid region. The objective was to select and subsequently monitor the most appropriate programme for safe water availability. On the basis of the SEA results, a project was identified and implemented with successful results. In terms of comparisons of alternatives, AHP meets the requirements of human development programme assessment, including the importance of simplicity, a multidisciplinary and flexible approach, and a focus on the beneficiaries' concerns. With respect to monitoring, the study shows that AHP contributes to SEA by identifying the most appropriate indicators, in order to control the impacts of a project.     

An environmental assessment of food supply chains: a case study on dessert apples

The contemporary food system provides consumers with convenience, extensive choice, and the year-round availability of fresh produce. In this paper these achievements are recognized within the context of the associated environmental impacts. While many analyses have considered the energy and material efficiency of various options for food production and packaging, very few studies have investigated the environmental impacts of the transport components of food supply chains. This is surprising, given that the global sourcing of food produce, centralized distribution systems, and shopping by car have become prevalent in recent decades and have contributed to an increase in the distance between producer and consumer or “food miles.” In a case study the transport energy consumption is calculated for all possible ways in which dessert apples can be supplied to the UK consumer. The aim is to assess the environmental performance of the predominant fresh produce supply chains and to investigate claims that localized systems are more environmentally efficient. The main criteria used to compare the environmental efficiency in alternative food supply chains are the transport-related fossil-fuel energy consumption and associated carbon dioxide emissions. Analysis of the empirical data shows that transportation is now responsible for a considerable fraction of the total energy consumption in the life cycle of fresh apples, and in most cases exceeds the energy consumed in commercial apple cultivation. By developing local production and marketing systems for fresh products, transport demand can be reduced and many of the environmental impacts associated with existing supply chains can be avoided. The results of the study are then discussed in relation to the wider issues of transport policy, international trade, food security, and product-related environmental information for consumers.     

Why recycle? A comparison of recycling motivations in four communities

Four Illinois communities with different sociode-mographic compositions and at various stages of planning for solid waste management were surveyed to determine the influence of sociodemographic variables and planning stages on the factors that motivate recycling behavior. A factor analysis of importance ratings of reasons for recycling and for not recycling yielded five factors interpreted as altruism, personal inconvenience, social influences, economic incentives, and household storage. The four communities were shown to be significantly different in multivariate analyses of the five motivational factors. However, attempts to explain these community differences with regression analyses, which predicted the motivational factors with dummy codes for planning stages, a measure of self-reported recycling behavior, and sociodemographic measures were unsatisfactory. Contrary to expectation, the solid waste management planning stages of the cities (curbside pickup, recycling dropoff center, and planning in progress) contributed only very slightly to the prediction of motivational factors for recycling. Community differences were better explained by different underlying motivational structures among the four communities. Altruistic reasons for recycling (e.g., conserving resources) composed the only factor which was similar across the four communities. This factor was also perceived to be the most important reason for recycling by respondents from all four communities. The results of the study supported the notion that convenient, voluntary recycling programs that rely on environmental concern and conscience for motivation are useful approaches to reducing waste.     

Importance of information on tillage practices in the modelling of environmental processes and in the use of environmental indicators

Tillage has been and will always be integral to crop production. Tillage can result in the degradation of soil, water, and air quality. Of all farm management practices, tillage may have the greatest impact on the environment. A wide variety of tillage equipment, practices and systems are available to farmers, providing opportunities to enhance environmental performance. These opportunities have made tillage a popular focus of environmental policies and programs such as environmental indicators for agriculture. This paper provides a very brief examination of the role of tillage in crop production, its effect on biophysical processes and, therefore, its impact on the environment. Models of biophysical processes are briefly examined to demonstrate the importance of tillage relative to other farm management practices and to demonstrate the detail of tillage data that these models can demand. The focus of this paper is an examination of the use of information on tillage in Canada's agri-environmental indicators initiative, National Agri-environmental Health Analysis and Reporting Program (NAHARP). Information on tillage is required for several of the indicators in NAHARP. The type of data used, its source, and its quality are discussed. Recommendations regarding the collection of tillage data and use of tillage information are presented.     

活性污泥吸附重金属Cr6+的研究

以活性污泥为材料，采用不同时间、温度、pH进行吸附重金属Cr^6 的研究。实验结果表明，当吸附时间为15min，吸附温度为28℃，吸附pH=7时具有较好吸附效果。在此条件下，当重金属Cr^6 浓度为50mg/L，其吸附率可达97．2％。     

Using the guild concept in the assessment of tree harvesting effects on understory herbs: A cautionary note

To help determine whether plants should be grouped into guilds for environmental impact assessment, the responses of six members of a guild of deciduous forest herbs to selective tree harvesting were compared. Harvesting operations themselves (tree cutting and skidding) had little effect on five of the six species but the sixth species decreased more in cut plots than in uncut plots. Subsequent microclimatic changes, resulting from tree cutting, also affected guild members differently. In the first year after cutting, two species increased more in cut plots than in uncut plots, while three other species did not change in frequency of occurrence and the sixth species decreased more in cut plots than in uncut plots. This inconsistent response of guild members to tree harvesting suggests that caution should be exercised in using guilds to assess plant response to environmental change.     

Environmental considerations in Swedish Forestry: A study of the administrative process

This report briefly describes the implementation process involving nature conservation considerations in forestry, according to a recently passed law in Sweden. Described are the forestry and political systems in Sweden regarding nature conservation in forestry, as well as of the administrative process involved when a forest is going to be clearcut. Conclusions are based upon the conditions and outcome of two clearcutting cases outlined in this report, and are focused on the interactions and control functions among various agencies and levels of government. The policy on the consideration of nature in forestry is, to a large extent, formed at a very low level in the bureaucracy and is subject to negotiation from case to case. Checkups between different agencies as a form of concurrent government become important means of implementing environmental considerations in forestry, having the split roles and interests of the authorities in mind.     

Understanding Fish Behavior,Distribution, and Survival in Thermal Effluents Using Fixed Telemetry Arrays: A Case Study of Smallmouth Bass in a Discharge Canal During Winter

Advances in telemetry have facilitated the continuous monitoring of fish position and movement. At present, there are few examples where this approach has been applied to environmental monitoring or assessment. Here we 1) present a case study that used a fixed antenna array and continuously scanning coded receiving system to monitor the movement of radio-tagged smallmouth bass (Micropterus dolomieu) in a thermal discharge canal on Lake Erie during the winter of 1998/1999, and 2) evaluate the use of fixed telemetry arrays for environmental monitoring. Although the number of radiotagged bass in the canal decreased gradually over time, fish spent the majority of the winter in the canal. When in the canal, bass selected areas upstream of the tempering pumps where water was the warmest. This region was also high in habitat complexity, had adequate velocity refuges, and abundant forage. Despite residing in the thermal effluent throughout the winter, none of the fish monitored were observed to participate in reproductive activities in the canal in the Spring. Interestingly, during a biofouling chlorination pulse in May, 50% of radiotagged fish still residing in the canal left and did not return during the monitoring period. Utility infrastructure accessible to fish, including thermal effluents, should be considered as fish habitat and managed accordingly to minimize mortality and sublethal effects on resident and transient fish. Fixed telemetry arrays that permit the continuous monitoring of fish behavior as described in this paper are widely applicable to many issues in environmental management, monitoring, and conservation.     

A critical review of the water quality classification system in Turkey: A case study on Meric Basin

An 11-year period of water quality data, collected by the Directorate of Sate Water Works of Turkey are thoroughly analyzed for the purpose of implementing water quality classes to water resources in the Meric Basin, located on the European land mass of Turkey. Water quality parameters are divided into four groups as physical, organic, inorganic, and bacteriological. The quality class of each group is evaluated by taking into account the poorest quality of any parameter in the group, after which a quality rank is assigned to the sampling station and the waterbody in question. This method of water quality classification imposed by the Turkish Water Quality Act, is then criticized with respect to a statistical approach.     

Uncertainty characterization approaches for risk assessment of DBPs in drinking water: A review

The management of risk from disinfection by-products (DBPs) in drinking water has become a critical issue over the last three decades. The areas of concern for risk management studies include (i) human health risk from DBPs, (ii) disinfection performance, (iii) technical feasibility (maintenance, management and operation) of treatment and disinfection approaches, and (iv) cost. Human health risk assessment is typically considered to be the most important phase of the risk-based decision-making or risk management studies. The factors associated with health risk assessment and other attributes are generally prone to considerable uncertainty. Probabilistic and non-probabilistic approaches have both been employed to characterize uncertainties associated with risk assessment. The probabilistic approaches include sampling-based methods (typically Monte Carlo simulation and stratified sampling) and asymptotic (approximate) reliability analysis (first- and second-order reliability methods). Non-probabilistic approaches include interval analysis, fuzzy set theory and possibility theory. However, it is generally accepted that no single method is suitable for the entire spectrum of problems encountered in uncertainty analyses for risk assessment. Each method has its own set of advantages and limitations. In this paper, the feasibility and limitations of different uncertainty analysis approaches are outlined for risk management studies of drinking water supply systems. The findings assist in the selection of suitable approaches for uncertainty analysis in risk management studies associated with DBPs and human health risk.     

A procedure for incorporating spatial variability in ecological risk assessment of Dutch river floodplains

Floodplain soils along the river Rhine in the Netherlands show a large spatial variability in pollutant concentrations. For an accurate ecological risk characterization of the river floodplains, this heterogeneity has to be included into the ecological risk assessment. In this paper a procedure is presented that incorporates spatial components of exposure into the risk assessment by linking geographical information systems (GIS) with models that estimate exposure for the most sensitive species of a floodplain. The procedure uses readily available site-specific data and is applicable to a wide range of locations and floodplain management scenarios. The procedure is applied to estimate exposure risks to metals for a typical foodweb in the Afferdensche and Deestsche Waarden floodplain along the river Waal, the main branch of the Rhine in the Netherlands. Spatial variability of pollutants is quantified by overlaying appropriate topographic and soil maps resulting in the definition of homogeneous pollution units. Next to that, GIS is used to include foraging behavior of the exposed terrestrial organisms. Risk estimates from a probabilistic exposure model were used to construct site-specific risk maps for the floodplain. Based on these maps, recommendations for future management of the floodplain can be made that aim at both ecological rehabilitation and an optimal flood defense.     

Socioeconomic evaluation of the impact of natural resource stressors on human-use services in the Great Lakes environment: A Lake Michigan case study

The Great Lakes watershed is home to over 40 million people (Canadian and U.S.) who depend on a healthy Great Lakes ecosystem for economic, societal, and personal vitality. The challenge to policymakers and the public is to balance economic benefits with the need to conserve and replenish regional natural resources in a manner that ensures long term prosperity. Nine critical broad-spectrum stressors of ecological services are identified, which include pollution and contamination, agricultural erosion, non-native species, degraded recreational resources, loss of wetlands habitat, climate change, risk of clean water shortage, vanishing sand dunes, and population overcrowding. Many of these stressors overlap. For example, mining activities alone can create stress in at least five of these categories. The focus groups were conducted to examine the public’s awareness of, concern with, and willingness to expend resources on these stressors. This helped generate a grouping of stressors that the public is especially concerned about, those they care little about, and everything else in between. Stressors that the respondents have direct contact with tend to be the most important to them. This approach of using focus groups is a critical first step in helping natural resource managers such as Trustees and NGOs understand what subsequent steps to take and develop policy measures that are of most interest and value to the public. Skipping or glossing over this key first task could lead to difficulties with respect to survey design and model development in a non-market valuation study. The focus group results show that concern related to pollution and contamination is much higher than for any of the others. It is thus clear that outreach programs may be necessary to educate the public about the severity of some low-ranked stressors including climate change.     

The changing face of public concern about pollution in the United States: A case study of New Jersey

National surveys and a survey conducted by the authors in March and April 2004 revealed that the public’s concerns about air, water and land pollution have declined during the last four years in the United States and more specifically in the State of New Jersey. In New Jersey pollution remains a major concern of most residents, even during a period of a war, anxiety about terrorism and the economy. Those most anxious about pollution do not believe that government is doing enough to protect the environment, want to maintain current environmental laws, and are worried about the future. Disproportionately they are African and White Americans, middle income, and college graduates, in other words, part of the American mainstream. Direct attempts to weaken environmental protection are likely to be resisted by this core of the population, which does not trust current federal, state and local governments to protect the environment. We expect concerns for the environment to continue and yet change as production processes in the United States continue a trend toward pollution prevention, and we wait for the public’s mental models to catch up with this evolving reality.     

Impact of environmental production conditions on productivity and efficiency: a case study of wheat farmers in Bangladesh

Environmental conditions significantly affect production, but are often ignored in studies analysing productivity and efficiency leading to biased results. In this study, we examine the influence of selected environmental factors on productivity and efficiency in wheat farming in Bangladesh. Results reveal that environmental production conditions significantly affect the parameters of the production function and technical efficiency, as well as correlates of inefficiency. Controlling for environmental production conditions improves technical efficiency by 4 points (p<0.01) from 86% to 90%. Large farms are more efficient relative to small and medium sized farms (p<0.01 and 0.05), with no variation among regions. Policy implications include soil fertility improvement through soil conservation and crop rotation, improvement in managerial practices through extension services and adoption of modern technologies, promotion of education, strengthening the research-extension link, and development of new varieties that have higher yield potential and are also suitable for marginal areas.