Minimization of the environmental impact of chrome tanning: a new process with high chrome exhaustion

In all tanning technology operations wastes are generated. These reach the environment as residual waters, solid and liquid waste as well as atmospheric emissions and odours.

This study tests an alternative method to the traditional tanning method at an industrial level. The new method is based on tanning without float and by significantly increasing the temperature at the end of the tanning process. The properties of the leathers obtained using the two methods have been compared and the results indicate that those leathers have similar physical, chemical, and organoleptic properties. However, the differences existing from the environmental point of view are significant. It is not necessary to use clean water for this tanning. Moreover, there is a 75% reduction of the residual float, a 91% reduction of the chrome discharged, and a 94% reduction of the chlorides discharged. A financial assessment was carried out to demonstrate that the newly proposed system is 32% more economic than the traditional one.     

Minimization of the environmental impact in the unhairing of bovine hides

This study tests an alternative method to the traditional unhairing method used during the process of tanning the hides. The new method is based on the substitution of sodium sulfide by hydrogen peroxide as an unhairing agent in both hair recovery and recirculation of the floats employed in the process. The properties of the hides obtained using the two methods have been compared and the results indicate that those hides have similar physical, chemical, and organoleptic properties. However, the differences existing from an environmental point of view are significant. These include reductions of water consumption (approx 70%), chemical oxygen demand (approx 35%), toxicity (98%) and total kjendhal nitrogen (50%). Also, the risk associated with the production of hydrogen sulfide is eliminated, which implies a great improvement in terms of safety for the workers. Given the large amounts of water and chemical pollution discharged in the process, the reductions in absolute values represent a significant improvement. A financial assessment was carried out to demonstrate that the proposed new system is 16% more economic than the traditional one.     

制革厂铬鞣废水中铬的回收处理研究

针对制革厂铬鞣废水含铬(Cr3 )量高、成分复杂、沉淀后铬泥纯度低的问题,本实验采用优化后的直接加碱沉淀法、絮凝后再加碱沉淀法和新型的硅铁电极法来回收铬鞣废水中的铬.3种方法所得铬泥的纯度分别在36%、65%和80%以上,比原铬泥纯度(27.7%)最多提高了近2倍.     

Detecting improvement in ambient air toxics: An application to ambient benzene measurements in Houston,Texas

Traditional regulatory methods for evaluating air toxics have several limitations. Two common methods rely either on self-reported industrial emissions from the Toxics Release Inventory or a single summary statistic such as the average or arithmetic mean. A novel statistical approach for detecting overall long term improvement in ambient air quality is demonstrated using measurements of the air toxic benzene evaluated over five years in Houston, Texas. Through trends of seven key statistical measures, long term improvements were detected at more monitors than would have been found using traditional methods while lack of improvement is highlighted at other monitors. This new approach includes analysis of high and low end concentrations, as well as central tendency, evaluated at specific air toxic human health risk thresholds.     

New Approaches to the Design of Afterburners for Varnish Cookers

The best method of controlling varnish kettle emissions is by thermal incineration. Two new approaches have been developed; these utilize the integral-blower burner and the non-powered raw gas burner. Both of these new approaches offer significant advantages over conventional methods of incineration. Installation, operating, and maintenance costs are substantially reduced when either approach is utilized.

When compared to conventional methods, the new approaches achieve an increase of 100% in mixing velocity or turbulence. This results in a reduction of 20% in fuel consumption. Residence time is reduced by 29% via the non-powered raw gas burner approach. An average reduction of 65% is obtained in the length to diameter ratio. Choice of which approach depends upon several factors, primarily the type of fuel available and the minimum oxygen concentration in the fume stream.     

制革废水中丙烯酸类鞣剂的膜分离特征

针对3种丙烯酸类鞣剂超滤(UF)、反渗透(RO)分离参数进行了实验研究,探索其在废水深度处理中膜去除的可行性,研究结果表明,3种鞣剂在分离参数:浓度为200 mg/L,超滤的操作压力(P UF)为0.11 MPa,反渗透的操作压力(P RO)为0.4 MPa的条件下UF-RO分离,效果最好。其次,丙烯酸类鞣剂对膜通量影响较大,导致产生的清液较少,所以用UF、RO处理含有这类物质的制革废水时,应尽可能对废水进行预处理。最后,丙烯酸类鞣剂分子中含有极性较强的基团时,粒径分离效果不同。     

Haematological and biochemical effects of polyphenolics in animal models

Polyphenols of natural and synthetic origin are exploited in tanning sector to convert putrescible skin/hide to non-putrescible leather. However, only 30-40% of the inputs have been taken up for processing, the remaining is released as unspent. The existing conventional wastewater treatment systems are inefficient in removing or degrading these unspent polyphenols and thus detrimental to ecosystem. The present study demonstrates the evaluation of impact of both synthetic and natural polyphenols on biochemical and haematological properties of blood and serum in animal models. The results reveal that concentrations of polyphenols play a major role. At higher concentrations, irrespective of their nature, there was a marked change in the lipid profile (81% reduction), followed by insignificant change in glucose levels, RBC and WBC counts and other haematological parameters. At lower concentrations, no significant changes in the above said properties were observed.     

Environmental accounting on a communal level: A tool to support environmental management and decision-making by communal executives

Starting from an ecological perspective of urban-industrial areas, environmental accounting is used to analyse and to evaluate which environmental impacts are the result of communal activities (e.g. the results of different kinds of water supply systems). Therefore, the anthropogenic fluxes, the changing quality of areas as well as the processes between the environmental fields are taken into account. The approach is based on methodical elements of te Life Cycle Analysis and the Environmental Impact Assessment. Looking at the ‘urban systems’ within the communal activities, ‘ecological modelling’ gives us a new and fuller picture of the spatial and temporal character of urban metabolism. The approach supports the perception of cumulative effects and the postponement of environmental problems and opens new horizons for process-oriented environmental planning within the community. Greater efficiency and a decrease in costs can be arrived at by leaving ‘end of the pipe’ strategies; opportunities for a better planning process and measures for different individuals and organisations can be drawn up. A data base which acts as a ‘support system’ implements the computer-aided approach to environmental accounting.     

Road de-icing salt as a potential constraint on urban growth in the Greater Toronto Area, Canada

North America's fifth most populated municipality--the Greater Toronto Area (GTA)--is undergoing rapid urban development with serious questions being raised regarding the long-term impacts of urban growth on the quality and quantity of ground and surface water. Degradation of groundwater quality by NaCl de-icing salt is the primary concern since there are no cost effective alternatives to NaCl de-icing salt and there is little evidence that salt loadings to the subsurface can be significantly reduced. In 2001, the issue acquired a new sense of urgency when de-icing chemicals containing inorganic chloride salts (with or without ferrocyanide de-caking agents) were designated as toxic under the Canadian Environmental Protection Act. To heighten concerns, future growth in the GTA will inevitably take place in areas where groundwater is regularly used for potable supply. Studies using groundwater flow and transport models show that significant deterioration of groundwater quality can be expected in shallow aquifers as a result of urban development with chloride concentrations approaching the drinking water quality standard of 250 mg/l. Results demonstrate that urban planning needs a fresh approach that explicitly includes groundwater protection and aquifer management in the decision-making process, clearly defines acceptable environmental performance standards and makes greater use of groundwater models to evaluate alternative urban designs.     

Stabilization/solidification of salt from a waste incinerator

A laboratory procedure was developed and verified for stabilizing salt produced by an industrial waste incinerator. This procedure is based on salt stabilization by means of an asphalt binder. Conductivity values and relevant anion contents in leachates of stabilized waste with an asphalt coating were near zero. The pH value of these leachates equaled the pH value of the water used, so that the stabilized waste salt represented inert material, posing no environmental hazard. An unusually significant reduction in the volume of processed salt occurred during stabilization. After compacting under 10.4 MPa pressure, the volume of test specimens was almost 55% smaller than the initial salt volume. In practice, this would mean more than a doubling of landfill waste capacity. Volume reduction was successfully explained by means of a mathematical model.     

Stabilization/Solidification of Salt from a Waste Incinerator

ABSTRACT

A laboratory procedure was developed and verified for stabilizing salt produced by an industrial waste incinerator. This procedure is based on salt stabilization by means of an asphalt binder. Conductivity values and relevant anion contents in leachates of stabilized waste with an asphalt coating were near zero. The pH value of these leachates equaled the pH value of the water used, so that the stabilized waste salt represented inert material, posing no environmental hazard. An unusually significant reduction in the volume of processed salt occurred during stabilization. After compacting under 10.4 MPa pressure, the volume of test specimens was almost 55% smaller than the initial salt volume. In practice, this would mean more than a doubling of landfill waste capacity. Volume reduction was successfully explained by means of a mathematical model.     

Through-electromigration: a new method of investigating pore connectivity and obtaining formation factors

The retardation of radionuclides and other contaminants in fractured crystalline rock is strongly associated with the diffusive properties of the rock matrix. At present, the scientific community is divided concerning the question of long-range pore connectivity in intrusive igneous rock. This paper presents a fast new method, called the through-electromigration method, of obtaining formation factors and investigating pore connectivity. The method involves the migration of an ionic tracer through a rock sample with an electrical potential gradient as the main driving force. The method is analogous to the through-diffusion method but the experimental time is reduced by orders of magnitude. This enables investigations of pore connectivity, as measurements can be made on longer samples. In a preliminary investigation, the new method is compared to the traditional through-diffusion method as well as to rock resistivity methods. The diffusive properties of nine granitic rock samples from Laxemar in Sweden, ranging from 15 to 121 mm in length, have been investigated and the results are compared.     

Evaluating inspection and maintenance programs: a policy-making framework

This article presents a new analysis approach to design and evaluate motor vehicle inspection and maintenance (I/M) programs. The new approach, called I/M-Design, uses real-world data to provide two resources not previously available: (1) a transparent framework to quantitatively illustrate the range of emission reductions available from I/M, and (2) a sensitivity analysis tool to evaluate how key variables affect I/M performance. In addition, the approach satisfies a policy-making information need--how to convey, in a logical and straightforward manner, the expected benefits from I/M without relying on modeling tools inaccessible to those outside the air quality field. The material presented in this article illustrates the new approach by estimating hydrocarbon (HC) emission reduction benefits available from enhanced I/M in southern California's South Coast Air Basin. I/M-Design estimates that enhanced I/M results in a 14-28% reduction in light-duty motor vehicle HC exhaust emissions; this estimate compares well to other California I/M program evaluations. Even more importantly, I/M-Design sensitivity analyses illustrate how I/M programs that implement stringent failure thresholds, motivate pre-test repair work, and improve repair effectiveness can provide emission reductions that substantially exceed the performance of existing programs.     

Salting our landscape: an integrated catchment model using readily accessible data to assess emerging road salt contamination to streams

A new integrated catchment model for salinity has been developed to assess the transport of road salt from upland areas in watersheds to streams using readily accessible landscape, hydrologic, and meteorological data together with reported salt applications. We used Fishkill Creek (NY) as a representative watershed to test the model. Results showed good agreement between modeled and measured stream water chloride concentrations. These results suggest that a dominant mode of catchment simulation that does not entail complex deterministic modeling is an appropriate method to model salinization and to assess effects of future applications of road salt to streams. We heuristically increased and decreased salt applications by 100% and results showed that stream chloride concentrations increased by 13% and decreased by 7%, respectively. The model suggests that future management of salt application can reduce environmental concentrations, albeit over some time.     

Oily wastewater treatment using a novel hybrid PBR-UASB system

In this study, anaerobic treatability of oily wastewater was investigated in a hybrid reactor system consisting of a packed bed reactor (PBR) followed by an upflow anaerobic sludge blanket (UASB) reactor at 35 degrees C. The system was operated using real pet food wastewater at different hydraulic retention times and loading rates for 165 d. The PBR was packed with sol-gel/alginate beads containing immobilized enzyme which hydrolyzed the oil and grease (O&G) into free long chain fatty acids, that were biodegraded by the UASB. The hybrid system was operated up to an oil loading rate of 4.9 kg O&Gm(-3)d(-1) (to the PBR) without any operational problems for a period of 100 d, with COD and O&G removal efficiencies above 90% and no sludge flotation was observed in the UASB. Beads supplement to the PBR was less than 2 g d(-1) and the relative activity was about 70%. Further increment in O&G loading to 18.7 kg O&Gm(-3)d(-1) caused destabilization of the system with 0.35% (v float/v feed) sludge float removed from the UASB.     

Natural background visibility and regional haze goals in the Southeastern United States

The goal of the regional haze mitigation program in the United States is to attain "natural conditions" in national parks and wilderness areas by 2064. Results of research investigations on background concentrations of sea salt and biogenic organic matter, of episodic Saharan and Asian dust, and of carbon from natural fires were reviewed to provide a basis for making site-specific estimates of what the concentrations of atmospheric fine particulate matter components might be under natural conditions in the Southeastern United States. Based on this review, rough estimates were made of potential contributions of these aerosol components to natural background visibility. Natural organic particles were the dominant influence on the rate of visibility improvement required to reach natural conditions at an inland, mountainous location, and organic particles and sea salt were the dominant influences on the rate at a coastal location. African dust also had a large episodic effect, but the current regulatory approach is not designed to address episodic background variations. Insufficient data exist to quantify the contributions of wildfires with any detail, although global air pollution modeling provides insight, and their emissions can be locally dominant. Conservative regional refinements to the default natural background estimates do not greatly alter the region-wide rates of reduction of ambient particulate matter concentrations that will be needed to accomplish the first phase of the regional haze program. However, refinements at specific Class I areas may have considerable influence on defining the nature (magnitude and spatial and temporal distribution) of local emission reduction efforts there.     

Field-scale demonstration of induced biogeochemical reductive dechlorination at Dover Air Force Base, Dover, Delaware

Biogeochemical reductive dechlorination (BiRD) is a new remediation approach for chlorinated aliphatic hydrocarbons (CAHs). The approach stimulates common sulfate-reducing soil bacteria, facilitating the geochemical conversion of native iron minerals into iron sulfides. Iron sulfides have the ability to chemically reduce many common CAH compounds including PCE, TCE, DCE, similar to zero valent iron (Fe(0)). Results of a field test at Dover Air Force Base, Dover, Delaware, are given in this paper. BiRD was stimulated by direct injection of Epson salt (MgSO(4).7H(2)O) and sodium (L) lactate (NaC(3)H(5)O(3)) in five injection wells. Sediment was sampled before and 8 months after injection. Significant iron sulfide minerals developed in the sandy aquifer matrix. From ground water analyses, treatment began a few weeks after injection with up to 95% reduction in PCE, TCE, and cDCE in less than 1 year. More complete CAH treatment is likely at a larger scale than this demonstration.     

Dynamic chemical characteristics of soil solution after pig manure application: a column study

When manures from intensive livestock operations are applied to agricultural or vegetable fields at a high rate, large amounts of salts and metals will be introduced into soils. Using a column leaching experiment, this study assessed the leaching potential of the downward movement of Cu and Zn as well as some salt ions after an intensive farm pig manure at rates of 0%, 5% and 10% (w/w) were applied to the top 20 cm of two different textured soils (G soil -sandy loam soil; H soil-silty clay loam soil), and investigated the growth of amaranth and Cu and Zn transfer from soil to amaranth (Amaranthus tricolor). Soil solutions were obtained at 20, 40 and 60 cm depth of the packed column and analyzed for pH, electrical conductivity (EC), dissolved organic matter (DOC) and Cu and Zn concentrations. The results indicated that application of pig manure containing Cu and Zn to sandy loam soil might cause higher leaching and uptake risk than silty clay loam soil, especially at high application rates. And manure amendment at 5% and 10% significantly decreased the biomass of amaranth, in which the salt impact rather than Cu and Zn toxicity from manures played more important role in amaranth growth. Thus the farmer should avoid application the high rate of pig manure containing metal and salt to soil at a time, especially in sandy soil.     

Assessment of a process to degrade metal working fluids using Pseudomonas stutzeri CECT 930 and indigenous microbial consortia

The development of a novel biological process to treat metal working fluids (MWFs)-containing effluents at bioreactor scale was pursued in this work. The bacteria Pseudomonas stutzeri CECT 930 was investigated for the first time as an alternative agent for MWF degradation. An adequate medium design and mixing and aeration system, as well as an appropriate microorganism proved to be crucial for reaching high levels of degradation by P. stutzeri and by an indigenous consortium (about 70% and 50% of reduction in total petroleum hydrocarbon content in less than 2 wk, respectively). Additionally, as there is no information in literature trying to kinetically characterize an MWF-polluted effluent degradation process, all the experimental data were fitted to logistic and Luedeking and Piret models, that allowed to elucidate the growth-associated character of the biodegradation process.     

Reduction of perchlorate and nitrate by salt tolerant bacteria

Spent regenerant brine from ion-exchange technology for the removal of perchlorate and nitrate produces a high salt waste stream, which requires remediation before disposal. Bioremediation is an attractive treatment option. In this study, we enriched for salt tolerant bacteria from sediments from Cargill salt evaporation facility (California, USA), the Salton Sea (California, USA), and a high density hydrocarbon oxidizing bacterial cocktail. The bacterial cocktail enrichment culture reduced ClO4- from 500 to 260 mg 1 in 4 weeks. Salt tolerant bacterial isolates from the enrichment cultures and two denitrifying salt tolerant bacteria, Haloferax denitrificans and Parococcus halodenitricans, substantially reduced perchlorate. The highest rate of perchlorate removal was recorded with the isolate, Citrobacter sp.: 32% reduction in 1 week. This bacterium substantially reduced perchlorate in 0-5% NaCl solutions and maximally at 30 degrees C and at an initial pH 7.5. In simulated brines containing 7.5% total solids, the Citrobacter sp. significantly reduced both perchlorate and nitrate with 34.9 and 15.6% reduction, respectively, in 1 week. Coculture of a potent perchlorate reducing, non-salt tolerant (non-saline) bacterium, perclace and the Citrobacter sp. proved most effective for perchlorate removal in the brine (46.4% in 1 week). This study demonstrates that both anions can be reduced in treatment of brines from ion exchange systems.