Utilization of coal combustion by-products in sustainable construction materials

Solid waste management is gaining significant importance with the ever-increasing quantities of industrial by-products and wastes. With the environmental awareness and scarcity of space for landfilling, wastes/by-product utilization has become an attractive alternative to disposal. Several industrial by-products are produced from manufacturing processes, service industries and municipal solid wastes. Some of these industrial by-products/waste materials could possibility be used in cement-based materials.Coal combustion by-products (CCBs) represent incombustible materials left after combustion of coal in conventional and/or advanced clean-coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean-coal technology combustors. This paper briefly describes various coal combustion products produced, as well as current best recycling use options for these materials. Materials, productions, properties, potential applications in manufacture of emerging materials for sustainable construction, as well as environmental impact are also briefly discussed.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

Thermal treatments of industrial wastes in controlled atmospheres for the elimination of As, Hg, Cd, Se and the concentration of Pb, Cu and Zn

Thermal treatments of five different types of non-ferrous metallurgical wastes, under a controlled atmosphere, were carried out at temperatures lower than 800°C for the separation of their toxic compounds and the concentration of valuable metals in the treatments residues. The best results were obtained by the treatments in air or hydrogen, or both successively. Simple treatments, using air or hydrogen, of three samples allowed the elimination of more than 95% of their toxic elements and almost doubled their valuable metals concentration. For the rest of the samples, a combined treatment was necessary for their efficient decontamination. In this case, the valuable metals content in the treatment's residue was increased to a reasonable value. Most of the solids issuing from these treatments can be recycled in current non-ferrous metallurgical processes.     

四川省危险废物管理现状分析及评价

随着城市化进程的加快,危险废物的产生量快速增加,数量多、分布广、危害大、潜在利用价值高,管理处理难度大,因此带来了巨大的环境安全隐患。本文利用相关调查统计数据,分析了四川省危险废物产生特性及污染特性,指出危险废物管理过程中出现的问题已成为阻碍四川省循环经济发展及生态省建设的壁垒,针对出现的问题,提出了相关对策和建议。     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

Global disposal strategies for waste cathode ray tubes

The collection and management of waste electrical and electronic appliances around the world, and the possible negative environmental consequences have been an issue of current debate. Cathode ray tubes (CRTs) used as display screen for computer monitors and televisions contains large quantities of lead, estimated at between 0.5 and 4 kg, depending on the size of the CRT and has been identified as the most polluting of all electronic waste components. Having failed the tests used in the toxicity characterization of solid wastes, CRTs have been declared ‘hazardous’ and subsequently banned from landfills and incinerators in most developed countries. Presently, large quantities of CRTs are generated globally with only few developed countries having effective take back and sound management program. Meanwhile, large quantities of CRT-containing devices are being moved across frontiers into developing countries in the name of ‘reuse’ and ‘bridging the digital divide’. With near absence of recycling infrastructure for electronic wastes in most developing countries, waste CRTs are disposed of with MSW at open dumps and unsanitary landfills. This paper reviews the current practices in the management of CRTs around the world, with emphasis on the role of regulations, availability of recycling infrastructure, recycling/reuse routes, and export into developing countries. Inappropriate disposal of waste CRTs creates the opportunity for large-scale environmental contamination with heavy metals, especially lead. Appropriate disposal routes are required globally in the management of CRTs in order to mitigate environmental contamination and human exposure to toxins.     

The possibility of in situ heavy metal decontamination of polluted soils using crops of metal-accumulating plants

The decontamination of soils and wastes polluted with heavy metals presents one of the most intractable problems for soil clean-up. Present technology relies upon metal extraction or immobilization processes, both of which are expensive and which remove all biological activity in the soil during decontamination. They may only be appropriate for small areas of valuable redevelopment land. In this paper the use of metal-accumulating plants is explored for the removal of metals from superficially-contaminated soils such as those resulting from the long-term application to land of metal-contaminated sewage sludges. Green remediation employs plants native to metalliferous soils with a capacity to bioaccumulate metals such as zinc and nickel to concentrations greater than 2% in the aerial plant dry matter (hyperaccumulators). Growing such plants under intensive crop conditions and harvesting the dry matter is proposed as a possible method of metal removal and for ‘polishing’ contaminated agricultural soils down to metal concentrations below statutory limits. Not only are the biological activity and physical structure of soils maintained but the technique is potentially cheap, visually unobtrusive and offers the possibility of biorecovery of metals. The limitations of the process are reviewed and the future requirements for the development of efficient phytoremediators are outlined.     

我国南方某城市垃圾焚烧飞灰特性及固化/稳定化处置实验

我国南方某城市主要采用焚烧法处理生活垃圾,已建7个焚烧厂日产生飞灰量为101.62 t/d。文章分析了各个垃圾焚烧厂飞灰的化学组成和重金属浸出毒性,其主要成分为CaO、SiO2、MgO、Al2O3、Fe2O3、Na2O、SO3和Cl,所有焚烧飞灰都有至少一种重金属浸出浓度超标,属于危险废物。在飞灰处置出路亟待解决的背景下,实验探讨了飞灰稳定化工艺,结果表明10%的水泥添加量可以使飞灰中超标重金属(Cd、Pb和Zn)的浸出浓度满足危险废物鉴别浓度限值和安全填埋场入场浓度限值。同时,通过人体健康风险评价分析了飞灰豁免管理的可行性,并对近期和远期该城市焚烧厂飞灰的处理处置及管理提出建议。     

A waste management planning based on substance flow analysis

The paper describes the results of a municipal solid waste management planning based on an extensive utilization of material and substance flow analysis, combined with the results of specific life cycle assessment studies. The mass flow rates of wastes and their main chemical elements were quantified with a view to providing scientific support to the decision-making process and to ensure that the technical inputs to this process are transparent and rigorous. The role of each waste management option (recycling chains, biological and thermal treatments), as well as that of different levels of household source separation and collection (SSC), was quantitatively determined. The plant requirements were consequently evaluated, by assessing the benefits afforded by the application of high quality SSC, biological treatment of the wet organic fraction, and thermal treatment of unsorted residual waste. Landfill volumes and greenhouse gas emissions are minimized, toxic organic materials are mineralized, heavy metals are concentrated in a small fraction of the total former solid waste volume, and the accumulation of atmophilic metals in the air pollution control residues allows new recycling schemes to be designed for metals. The results also highlight that the sustainability of very high levels of SSC is reduced by the large quantities of sorting and recycling residues, amounts of toxic substances in the recycled products, as well as logistic and economic difficulties of obtaining very high interception levels. The combination of material and substance flow analysis with an environmental assessment method such as life cycle assessment appears an attractive tool-box for comparing alternative waste management technologies and scenarios, and then to support waste management decisions on both strategic and operating levels.     

Reclamation of wastes contaminated by copper,lead, and zinc

Waste materials containing toxic levels of copper, lead, and zinc, such as mine and smelter wastes, present difficult conditions for the establishment of vegetation. This article reviews the many attempts which have been made to reclaim these wastes. Inert wastes from mining and quarrying operations, such as slate quarry waste and certain colliery shales, seem to be good materials for reclaiming wastes contaminated by copper, lead, and zinc. Organic wastes, such as sewage sludge and domestic refuse, may provide only a temporary visual improvement and stabilization of the toxic materials.Nontolerant plant materials may often be planted directly on modern waste materials, which are less toxic than they were in the past. However, tolerant plant materials are needed for revegetating waste materials produced by early and more primitive extraction methods.     

Marketing issues related to waste-grown aquatic foods

Environmental Management - Are societal wastes all bad? Some of them, including heat from power plants and certain organic wastes, have been demonstrated to be potentially valuable for growing...     

A Paradigm of International Environmental Law: The Case for Controlling the Transboundary Movements of Hazardous Wastes

The production of large quantities of wastes globally has created a commercial activity involving the transfrontier shipments of hazardous wastes, intended to be managed at economically attractive waste-handling facilities located elsewhere. In fact, huge quantities of hazardous wastes apparently travel the world in search of “acceptable” waste management facilities. For instance, within the industrialized countries alone, millions of tonnes of potentially hazardous waste cross national frontiers each year on their way for recycling or to treatment, storage, and disposal facilities (TSDFs) because there is no local disposal capacity for these wastes, or because legal disposal or reuse in a foreign country may be more environmentally sound, or managing the wastes in the foreign country may be less expensive than at home. The cross-boundary traffic in hazardous wastes has lately been under close public scrutiny, however, resulting in the accession of several international agreements and laws to regulate such activities. This paper discusses and analyzes the most significant control measures and major agreements in this new commercial activity involving hazardous wastes. In particular, the discussion recognizes the difficulties with trying to implement the relevant international agreements among countries of vastly different socioeconomic backgrounds. Nonetheless, it is also noted that global environmental agreements will generally be a necessary component of ensuring adequate environmental protection for the world community—and thus a need for the careful implementation of such agreements and regulations.     

Treatment of lead mine waste by a Mozley multi-gravity separator (MGS)

Increasing environmental awareness and pressure is focusing attention on metal removal leading to the accelerated development of contaminated land reclamation technologies. The majority of wastes associated with base metal mining activity are fine tailings. Depending on the age and history of the metals, their characteristics vary considerably and each deposit requires individual characterisation. This paper investigates the treatment of lead-zinc mine wastes by the multi-gravity separator, a novel mineral processing machine. A laboratory study was carried out to find the most effective conditions using parameters such as drum angle and size fraction. A material and mass balance for the laboratory system has demonstrated that approximately 12% of the Pb can be removed in the form of concentrate with 12% Pb content.     

不锈钢在两种腐蚀试验方法的结果比较

通过标准GM 9540P和GMW 14872两种方法的试验,评价了不锈钢SUH409L、B409和409DG的耐蚀性,两种方法的结果表明三种不锈钢的耐蚀性能由强至弱依次为SUH409L〉B409〉409DG。     

Oxidation kinetics of the combustible fraction of construction and demolition wastes

Proper disposal of construction and demolition wastes (CDW) has received wide attention recently due to significantly large quantities of waste streams collected from razed or retrofitted buildings in many metropolitan regions. Burning the combustible fractions of CDW (CCDW) and possibly recovering part of the heat content for economic uses could be valuable for energy conservation. This paper explores the oxidation kinetics of CCDW associated with its ash characterization. Kinetic parameters for the oxidation of CCDW were numerically calculated using thermal gravimetric analysis (TGA) and the resultant rate equations were therefore developed for illustrating the oxidation processes of CCDW simultaneously. Based on three designated heating rates, each of the oxidation processes can be featured distinctively with five different stages according to the rate of weight change at the temperature between 300 K and 923 K. In addition, Fourier transform infrared (FTIR) spectroscopy was employed, associated with a lab-scale fixed-bed incinerator for monitoring the composition of flue gas. Carbon dioxide (CO2) was found as a major component in the flue gas. The fuel analysis also included an ash composition analysis via the use of X-ray powder diffraction (XRD), atomic absorption (AA) spectroscopy, inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDX). The ash streams were identified as nonhazardous materials based on the toxicity characteristic leaching procedure (TCLP). Overall, the scientific findings gained in this study will be helpful for supporting a sound engineering design of real-world CCDW incineration systems.     

Pollution and Waste Production in Home-Based Enterprises in Developing Countries: Perceptions and Realities

Using mainly qualitative data from a four country case study, this paper describes the nature of home-based enterprises (HBEs) and the wastes that they produce. It finds that most only generate material similar to domestic wastes, but in greater quantities. While some are undoubtedly generating dangerous wastes, they are only a small proportion of all HBEs and tend to be aware of at least some of the problem and take mitigating steps. The paper argues that the encouragement of clean processes should replace the usual negative views about HBEs that are held by policy makers.     

The composition and environmental hazard of copper slags in the context of the Basel Convention

A recent comprehensive review of the characteristics and utilization of copper slags encourages (properly) several applications for this important pyrometallurgical byproduct. However, the review does not include possible environmental effects from these slags. The United Nations Basel Convention on the Transboundary Movement of Hazardous Wastes and Their Disposal characterizes copper compounds that exhibit specified hazard characteristics as hazardous wastes. In 1996, the Convention considered further characterization of these and other compounds and substances. The final characterization of copper slags is as non-hazardous, i.e., exempt from control. This decision was based in part (if not largely) on the data that are presented here. Literature reports were used to accumulate data describing the chemical composition and acid leaching of commercial copper slags from three countries. From these data, average values of chemical composition and their statistical confidence limits (95%) were calculated. The variability of the chemical analyses of three commercial slags produced over 19 or 20 months were statistically analyzed and shown to be small. The concentrations of toxic heavy metals in the slags are low and the frequency distributions of the values are narrow. Most of the data are normally distributed, validating the use of the statistics used and permitting predictions of likely values. The amounts of heavy metals extracted by an aggressive standard acid leach procedure are low and well below the United States. regulatory levels derived from drinking water standards. The results for total composition and leaching illustrate why the U.S. Environmental Protection Agency made a regulatory determination that such slags are not hazardous wastes. Later, in 1996, the Basel Convention Technical Working Group concurred and the Parties to the Convention adopted their recommendation.     

Comparative corrosion characteristics of automotive materials in Jatropha biodiesel

This study investigated the corrosion characteristics of widely used automotive materials: copper (Cu), aluminum (Al) and stainless steel (SS) in Jatropha biodiesel. The corrosion rate of the materials was measured by the weight loss and changes in the surface morphology using immersion test in biodiesel. Before and after the immersion test, fuel samples were characterized by the change in chemical composition, viscosity, density, and water content. Experimental results revealed that Cu had the highest corrosion rate, while SS had the lowest. The main fatty acids observed in the tested biodiesel were oleic (44.6 wt %), linoelic (31.9 wt %), Palmitic (14.6 wt %), and Stearic (7.6 wt %). Apart from linoelic acid, the compositions of all other acids were increased after the immersion test of 1600 h. Also, the viscosity, density, and water content of the fuel samples were increased after the immersion test. However, these properties were within the maximum standard limit except water content.     

Land application of biomass residue generated from palm oil processing: its potential benefits and threats

Man’s increased demand for food and better living conditions has led to over exploitation of resources and the consequent generation of enormous amounts of liquid and solid waste materials. This is one of the global challenges for mankind. In Malaysia, palm oil mill waste (POMW) contributes the highest proportion of industrial solid wastes produced yearly. Wastes from the mills include palm oil mill effluent, decanter cake, empty fruit bunches, seed shells and the fibre from the mesocarp. Direct application of POMW into agricultural soil has resulted in a number of problems such as water pollution, leaching. However, with application rates specific for targeted plant species, land application can be employed as a permanent solution to the problem of waste from palm oil mills. This review examines the characteristics of each of the palm oil wastes and their potential for use as a future fertilizer supplement.