典型氯碱污染场地环境风险评价

以广东某氯碱化工污染场地为研究区域,采集了场地22个土壤及地下水样品,分析了25项污染物在不同区域的分布特征及其来源。监测结果表明,煤炭堆场与锅炉房区土壤受重金属铅、镍污染。六六六、四氯化碳、三氯甲烷、六氯苯、苯是场地的特征污染物,主要分布在危险品仓库、漂洗车间与四氯化碳车间。根据监测结果开展了不同暴露途径致癌风险值及非致癌危害商的计算。结果表明,部分样品表层土壤中上述有机污染物的基于人体健康致癌风险指数均超过10-6,最高达到1.65×10-2,表明风险水平高;非致癌危害在各暴露途径下也超过可接受值1,最高达5.59×104,表明风险水平高。说明对于存在高风险的区域必须进行采取合适的措施进行修复,减缓场地再利用后对人群健康的影响。     

Environmental assessment on electrokinetic remediation of multimetal-contaminated site: a case study

In this study, an environmental assessment on an electrokinetic (EK) system for the remediation of a multimetal-contaminated real site was conducted using a green and sustainable remediation (GSR) tool. The entire EK process was classified into major four phases consisting of remedial investigations (RIs), remedial action construction (RAC), remedial action operation (RAO), and long-term monitoring (LTM) for environmental assessment. The environmental footprints, including greenhouse gas (GHG) emissions, total energy used, air emissions of criteria pollutants, such as NO_x, SO_x, and PM₁₀, and water consumption, were calculated, and the relative contribution in each phase was analyzed in the environmental assessment. In the RAC phase, the relative contribution of the GHG emissions, total energy used, and PM₁₀ emissions were 77.3, 67.6, and 70.4 %, respectively, which were higher than those of the other phases because the material consumption and equipment used for system construction were high. In the RAO phase, the relative contributions of water consumption and NO_x and SO_x emissions were 94.7, 85.2, and 91.0 %, respectively, which were higher than those of the other phases, because the water and electricity consumption required for system operation was high. In the RIs and LTM phases, the environmental footprints were negligible because the material and energy consumption was less. In conclusion, the consumable materials and electrical energy consumption might be very important for GSR in the EK remediation process, because the production of consumable materials and electrical energy consumption highly affects the GHG emissions, total energy used, and air emissions such as NO_x and SO_x.     

Industrial metabolism of chlorine: a case study of a chlor-alkali industrial chain

Substance flow analysis (SFA) is applied to a case study of chlorine metabolism in a chlor-alkali industrial chain. A chain-level SFA model is constructed, and eight indices are proposed to analyze and evaluate the metabolic status of elemental chlorine. The primary objectives of this study are to identify low-efficiency links in production processes and to find ways to improve the operational performance of the industrial chain. Five-year in-depth data collection and analysis revealed that system production efficiency and source efficiency continued increasing since 2008, i.e., when the chain was first formed, at average annual growth rates of 21.01 % and 1.01 %, respectively. In 2011, 64.15 % of the total chlorine input was transformed into final products. That is, as high as 98.50 % of the chlorine inputs were utilized when other by-products were counted. Chlorine loss occurred mostly in the form of chloride ions in wastewater, and the system loss rate was 0.54 %. The metabolic efficiency of chlorine in this case was high, and the chain system had minimal impact on the environment. However, from the perspectives of processing depth and economic output, the case study of a chlor-alkali industrial chain still requires expansion.     

Visual air quality assessment: Denver case study

Studies of visual air quality in the Denver metropolitan region during summer 1979 and winter 1979–1980 are described and results reported. The major objective of the studies was to investigate relationships among four types of variables important to urban visual air quality: (1) individuals' judgements of overall visual air quality; (2) perceptual cues used in making judgments of visual air quality; (3) measurable physical characteristics of the visual environment and (4) concentrations of visibility-reducing pollutants and their precursors. During August 1979 and mid-December 1979 to January 1980, simultaneous measurements of observational and environmental data were made daily at various locations throughout the metropolitan area. Observational data included ratings of overall air quality and related perceptual cues (e.g., distance, clarity, color, border) by multiple observers. Environmental data included routine hourly pollutant and meteorological measurements from several fixed locations within the city, as well as aerosol light scattering and absorption measures from one location. Statistical analyses indicated that (1) multiple perceptual cues are required to explain variation in judgments of overall visual air quality and (2) routine measurements of the physical environment appear to be inadequate predictors of either judgments of overall visual air quality or related perceptual cues.     

Environmental assessment on a soil washing process of a Pb-contaminated shooting range site: a case study

In this study, an environmental assessment on a soil washing process for the remediation of a Pb-contaminated shooting range site was conducted, using a green and sustainable remediation tool, i.e., SiteWise ver. 2, based on data relating specifically to the actual remediation project. The entire soil washing process was classified into four major stages, consisting of soil excavation (stage I), physical separation (stage II), acid-based (0.2 N HCl) chemical extraction (stage III), and wastewater treatment (stage IV). Environmental footprints, including greenhouse gas (GHG) emissions, energy consumption, water consumption, and critical air pollutant productions such as PM₁₀, NO _x , and SO _x , were calculated, and the relative contribution of each stage was analyzed in the environmental assessment. In stage I, the relative contribution of the PM₁₀ emissions was 55.3 % because the soil excavation emitted the fine particles. In stage II, the relative contribution of NO _x and SO _x emissions was 42.5 and 52.5 %, respectively, which resulted from electricity consumption for the operation of the separator. Stage III was the main contributing factor to 63.1 % of the GHG emissions, 67.5 % of total energy used, and 37.4 % of water consumptions. The relatively high contribution of stage III comes from use of consumable chemicals such as HCl and water-based extraction processes. In stage IV, the relative contributions of GHG emissions, total energy used, and NO _x and SO _x emissions were 23.2, 19.4, 19.5, and 25.3 %, respectively, which were caused by chemical and electricity demands for system operation. In conclusion, consumable chemicals such as HCl and NaOH, electric energy consumption for system operation, and equipment use for soil excavation were determined to be the major sources of environmental pollution to occur during the soil washing process. Especially, the acid-based chemical extraction process should be avoided in order to improve the sustainability of soil washing processes.     

Environmental implications of electricity purchase from independent power producers: a case study from Thailand

This paper analyses the effect on the environment of electricity purchase from independent power producers (IPPs) in the case of Thailand. The environmental implication is evaluated in terms of the net change in emission of air pollutants with electricity purchase from IPPs by a utility. The main finding of the study is that electricity purchase from a non-dispatchable IPP plant based on coal-fired generation would increase the net emissions compared with that without the purchase from IPPs. The study also shows that the lower plant factor of the IPP plant would also increase the emission of air pollutants. Furthermore, with non-dispatchable IPP plants, the total emission of air pollutants would increase, whereas with dispatchable IPP plants the total emission would decrease with the level of electricity purchases.     

River water quality assessment using environmentric techniques: case study of Jakara River Basin

Jakara River Basin has been extensively studied to assess the overall water quality and to identify the major variables responsible for water quality variations in the basin. A total of 27 sampling points were selected in the riverine network of the Upper Jakara River Basin. Water samples were collected in triplicate and analyzed for physicochemical variables. Pearson product-moment correlation analysis was conducted to evaluate the relationship of water quality parameters and revealed a significant relationship between salinity, conductivity with dissolved solids (DS) and 5-day biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), and nitrogen in form of ammonia (NH₄). Partial correlation analysis (r _p) results showed that there is a strong relationship between salinity and turbidity (r _p?=?0.930, p?=?0.001) and BOD₅ and COD (r _p?=?0.839, p?=?0.001) controlling for the linear effects of conductivity and NH₄, respectively. Principal component analysis and or factor analysis was used to investigate the origin of each water quality parameter in the Jakara Basin and identified three major factors explaining 68.11 % of the total variance in water quality. The major variations are related to anthropogenic activities (irrigation agricultural, construction activities, clearing of land, and domestic waste disposal) and natural processes (erosion of river bank and runoff). Discriminant analysis (DA) was applied on the dataset to maximize the similarities between group relative to within-group variance of the parameters. DA provided better results with great discriminatory ability using eight variables (DO, BOD₅, COD, SS, NH₄, conductivity, salinity, and DS) as the most statistically significantly responsible for surface water quality variation in the area. The present study, however, makes several noteworthy contributions to the existing knowledge on the spatial variations of surface water quality and is believed to serve as a baseline data for further studies. Future research should therefore concentrate on the investigation of temporal variations of water quality in the basin.     

An integrative assessment of a watershed impacted by abandoned mined land discharges

The Ely Creek watershed in Lee County, VA, USA, contains an abundance of abandoned mined land areas with acid mine drainage (AMD) that contaminate the majority of the creek and its confluence into Stone Creek. Acidic pH measurements ranged from 2.73 to 5.2 at several stations throughout the watershed. Sediments had high concentrations of iron (approximately 10,000 mg kg-1), aluminum (approximately 1,500 mg kg-1), magnesium (approximately 400 mg kg-1) and manganese (approximately 150 mg kg-1), and habitat was partially to non-supporting at half of the stations due to sedimentation. Benthic macroinvertebrate surveys at six of 20 stations sampled in the watershed yielded no macroinvertebrates, while eight others had total abundances of only one to nine organisms. Four reference stations contained > or = 100 organisms and at least 13 different taxa. Asian clam in situ toxicity testing supported field survey results. Laboratory, 10-day survival/impairment sediments tests with Daphnia magna and Chironomus tentans and 48-h water column bioassays with Ceriodaphnia dubia indicated environmental stress to a lesser degree. Ten parameters that were directly influenced by AMD through physical, chemical, ecological and toxicological endpoints were assimilated into an ecotoxicological rating (ETR) to form a score of 0-100 points for the 20 sampling stations, and the lower the score the greater the AMD stress. Twelve of the 15 sampling stations influenced by AMD received an ETR score of 13.75-57.5, which were categorized as severely stressed (i.e. comprised the < 60 percentile category) and worthy of the highest priority for future ecological restoration activities in the watershed.     

Development of a regenerable system employing silica-titania composites for the recovery of mercury from end-box exhaust at a chlor-alkali facility

The release of mercury to the environment is of particular concern because of its volatility, persistence, and tendency to bioaccumulate. The recovery of mercury from end-box exhaust at chlor-alkali facilities is important to prevent release into the environment and reduce emissions as required by NESHAP (National Emission Standards for Hazardous Air Pollutants). A pilot-scale photocatalytic reactor packed with silica-titania composite (STC) pellets was tested at a chloralkali facility over a 3-month period. This pilot reactor treated up to 10 ft3/min (ACFM) of end-box exhaust and achieved 95% removal. The pilot reactor was able to maintain excellent removal efficiency even with large fluctuations in influent mercury concentration (400-1600 microg/ft3). The STC pellets were regenerated ex situ by regeneration with hydrochloric acid and performed similarly to virgin STC pellets when returned to service. On the basis of these promising results, two full-scale reactors with in situ regeneration capabilities were installed and operated. After optimization, these reactors performed similarly to the pilot reactor. A cost analysis was performed comparing the treatment costs (i.e., cost per pound of mercury removed) for sulfur-impregnated activated carbon and the STC system. The STC proved to be both technologically and economically feasible for this installation.     

危险废物城市环境风险评估方法及案例研究

在不同经济社会发展情况下,危险废物的风险源危险性和风险受体脆弱性存在很大差异。因此,城市对危险废物采取的风险防控和应急措施应该因城市而异。然而,目前我国大部分城市对危险废物的管理仍然是全过程从严管理,并未建立基于风险评估的环境管理体系。本研究以城市为边界,从危险废物的风险源危险性、风险受体脆弱性和风险防控与应急能力3个维度构建评估指标体系,然后在层次分析法的基础上,采用等比例分配法对指标进行赋权,并运用线性加权法合成经过正向化处理的指标评分值,从而得出危险废物城市环境风险评估结果。通过计算3个维度评分值的耦合度,可以确定风险防控与应急能力维度与风险源危险性维度和风险受体脆弱性维度的匹配程度。运用该方法对深圳市开展案例研究,结果表明,深圳市在“无废城市”建设试点期间,主要通过提升风险防控与应急能力,将危险废物城市环境风险值降低了20.7%;并且风险防控与应急能力维度与风险源危险性维度和风险受体脆弱性维度的匹配度较高,属于高风险高能力城市。因此,建议深圳市在下一步工作中,继续完善涉危险废物项目环境准入审查,严格评估危险废物再利用安全,不断加强信息化手段在环境监管中的应用,避免涉危险废物突发环境事件的发生,全面降低危险废物对城市造成的环境风险。     

Harmonized assessment of nutrient pollution from urban systems including losses from sewer exfiltration: a case study in Germany

Environmental Science and Pollution Research - A growing literature indicates that untreated wastewater from leaky sewers stands among major sources of pollution to water resources of urban...     

Model comparison for risk assessment: a case study of contaminated groundwater

Many environmental multimedia risk assessment models have been developed and widely used along with increasing sophistication of the risk assessment method. Despite of the considerable improvement, uncertainty remains a primary threat to the credibility of and users' confidence in the model-based risk assessments. In particular, it has been indicated that scenario and model uncertainty may affect significantly the assessment outcome. Furthermore, the uncertainty resulting from choosing different models has been shown more important than that caused by parameter uncertainty. Based on the relationship between exposure pathways and estimated risk results, this study develops a screening procedure to compare the relative suitability between potential multimedia models, which would facilitate the reduction of uncertainty due to model selection. MEPAS, MMSOILS, and CalTOX models, combined with Monte Carlo simulation, are applied to a realistic groundwater-contaminated site to demonstrate the process. It is also shown that the identification of important parameters and exposure pathways, and implicitly, the subsequent design of uncertainty reduction and risk management measures, would be better-formed.     

Integrated biomonitoring of air quality with plants and lichens: a case study on ambient ozone from central Italy

A biennial integrated survey, based on the use of vascular plants for the bioindication of the effects of tropospheric ozone together with the use of automatic analysers of ozone, as well as the mapping of lichen biodiversity was performed in the area of Castelfiorentino (Tuscany, central Italy). Photochemically produced ozone proved to be a fundamental presence during the warm season, with maximum hourly means reaching 114 ppb, exceeding the information threshold as fixed by EU: the use of supersensitive tobacco Bel-W3 confirmed the opportunity of carrying out detailed cost-effective monitoring surveys. The potential for didactical and educational implications of this methodology are appealing. Critical levels set up for the protection of vegetation have exceeded considerably. The comparison of biomass productivity in sensitive and resistant individuals (NC-S and NC-R white clover clones, in the framework of an European network) provided evidence that ambient ozone levels are associated with relevant reduction (up to 30%) in the performance of sensitive material; effects on flowering were also pronounced. The economic assessment of such an impact deserves attention. Mapping of epiphytic lichen biodiversity – which has been used to monitor air quality worldwide – was not related to ozone geographical distribution as depicted by tobacco response.     

Economic evaluation of a landfill system with gas recovery for municipal solid waste management: a case study

Economic activity uses resources, which leads to waste generation. With rapid industrialisation and urbanisation, per capita solid waste generation has increased considerably. Solid waste generation data for last two decades shows an alarming increase. Owing to its improper and untimely collection, the transport and disposal of municipal solid waste poses a severe threat to various components of the environment and also to public health. This paper describes the merits and demerits of various technological aspects of solid waste management. Landfill technology, as it is the most widely employed and is regarded as the most suitable and simple mechanism, especially for tropical countries such as India, is emphasised. All possible costs and benefits and externalities are examined. A cost-benefit analysis of a landfill system with gas recovery (LFSGR) has been carried out for Mumbai city's solid waste, accounting for certain external costs and benefits, and found that it could make a huge difference of savings of about Rs. 6.366 billion (approx. $0.l40 billion) per annum with reference to the existing system of waste disposal.     

Differential accumulation of mercury and other trace metals in the food web components of a reservoir impacted by a chlor-alkali plant (Flix, Ebro River, Spain): Implications for biomonitoring

Comparative studies of biomonitors of trace metal contamination are relatively scarce. We took advantage of a point source pollution in a reservoir (Flix, Spain) to compare trace metal (Hg, Pb, Cd, Se, As, Zn, Cu, Cr) bioaccumulation patterns among 16 food web components. Our results indicate that most organisms are suitable for Hg biomonitoring, whereas other metals are better monitored by only some of them. Biofilms and zebra mussel were the organisms with larger and more diverse biomonitoring capacity. However, we show that using groups of biomonitors increase the scope and strengths of the conclusions and specific goals can be better addressed. We conclude providing an overview of the strengths and weaknesses of the main organisms considered for biomonitoring trace metals in rivers and reservoirs.     

Involving the public in local air pollution assessment: a citizen participation case study

The central theme of this paper is that the assessment of environmental issues requires citizen participation for several reasons, including access to local knowledge, quality assurance and to reveal values and agendas. One methodology for involving the public is presented, based around the case of air pollution assessment in Sheffield. The study procedure of using citizen groups is described, and an analysis of the material from the groups is given. The final section argues that group discussions can be an appropriate methodology for involving the public in environmental assessment, and that the participants were able to comment on the validity and quality of such technical activities as continuous monitoring and computer modelling of air pollution in an urban environment.     

Characteristics and health risk assessment of volatile organic compounds emitted from interior materials in vehicles: a case study from Nanjing,China

Environmental Science and Pollution Research - It has become a great habit for driving to work in people’s daily life in China. In order to understand the concentration of volatile organic...     

基于生命周期评价法的贝壳资源化利用环境效益分析 ——以大连市为例

以贝壳为研究对象,运用生命周期评价(LCA)法对贝壳的常规处理方法和3种资源化利用方法的环境影响进行比较。结果表明,处理1kg贝壳,方案0(填埋)的环境影响值为1.04×10-14;方案1(代替水泥生产中使用的石灰石)的环境影响值为-3.78×10-12;方案2(代替浸没式生物滤柱中的陶粒填料)的环境影响值为-1.85×10-14;方案3(代替砂作为建筑材料)的环境影响值为3.62×10-14。方案1与其他3种方案相比环境效益最大。方案0中填埋过程的环境影响贡献最大,贡献率为56.60%;方案1、方案2、方案3中环境影响最大的环节是贝壳粉碎过程,贡献率分别为85.72%、93.55%、98.48%;3种资源化利用方案主要避免原材料开采过程的环境影响。     

Environmental impact assessment (EIA): Equilibrium fugacity calculations and worst case approach

A mathematical model UNITRISK which can be used for screening purposes and risk ranking was set up to calculate relative risk values of single chemicals and mixtures of chemicals towards single or mixtures of organisms via contamination of air, water, soil and food dose. The concentration values are calculated by applying the fugacity concept or a dose must be defined. The dose-response is assumed to be linear versus concentration and degradative processes are not considered which is the worst case. The assumption that equilibria between the environmental phases exist is simplifying the model and is also representing the worst case. A mean risk factor is calculated which is 1 if the endpoint values (LC₅₀, LD₅₀, ADI, etc.) are exceeded for the investigated organisms and man.     

Determinants of environmental financing constraints: a case study from Vietnam

Environmental Science and Pollution Research - The Environment Fund is a state financial institution and a non-profit organization, operating mainly in concessional loans with low-interest rates...