Decomposition of 2-mercaptothiazoline in aqueous solution by ozonation

This study investigates the ozonation of 2-mercaptothiazoline (2-MT). The 2-MT is one of the important organic additives for the electroplating solution of the printed wiring board industry and has been widely used as a corrosion inhibitor in many industrial processes. It is of concern for the aquatic pollution control especially in the wastewaters. Semibatch ozonation experiments in the completely stirred tank reactor are performed under various concentrations of input ozone. The concentrations of 2-MT, sulfate, and ammonium are analyzed at specified time intervals to elucidate the decomposition of 2-MT during the ozonation. In addition, the time variation of the dissolved ozone concentration (C(ALb)) is continuously monitored in the course of experiments. Total organic carbon (TOC) is chosen and measured as a mineralization index of the ozonation of 2-MT. The results indicate that the decomposition of 2-MT is efficient, while the mineralization of TOC is limited via the ozonation only. Simultaneously, the yield of sulfate with the maximum value of about 47% is characterized by the increases of TOC removal and ozone consumption. These results can provide some useful information for assessing the feasibility of the treatment of 2-MT in the aqueous solution by the ozonation.     

Degradation of diuron in aqueous solution by ozonation

Degradation of diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] in aqueous solution and the proposed degradation mechanism of diuron by ozonation were investigated. The factors that affect the degradation efficiency of diuron were examined. The generated inorganic ions and organic acids during the ozonation process were detected. Total organic carbon removal rate and the amount of the released Cl(-) increased with increasing ozonation time, but only 80.0% of the maximum theoretical concentration of Cl(-) at total mineralization was detected when initial diuron concentration was 13.8 mg L(-1). For N species, the final concentrations of NO3(-) and NH4+ after 60 min of reaction time were 0.28 and 0.19 mg L(-1), respectively. The generated acetic acid, formic acid and oxalic acid were detected during the reaction process. The main degradation pathway of diuron by ozonation involved a series of dechlorination-hydroxylation, dealkylation and oxidative opening of the aromatic ring processes, leading to small organic species and inorganic species. The degradation efficiency of diuron increased with decreasing initial diuron concentration. Higher pH value, more ozone dosage, additive Na2CO3, additive NaHCO3 and additive H2O2 were all advantageous to improve the degradation efficiency of diuron.     

Degradation of diuron in aqueous solution by ozonation

Degradation of diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] in aqueous solution and the proposed degradation mechanism of diuron by ozonation were investigated. The factors that affect the degradation efficiency of diuron were examined. The generated inorganic ions and organic acids during the ozonation process were detected. Total organic carbon removal rate and the amount of the released Cl^? increased with increasing ozonation time, but only 80.0% of the maximum theoretical concentration of Cl^? at total mineralization was detected when initial diuron concentration was 13.8 mg L^?1. For N species, the final concentrations of NO₃ ^? and NH₄ ⁺ after 60 min of reaction time were 0.28 and 0.19 mg L^?1, respectively. The generated acetic acid, formic acid and oxalic acid were detected during the reaction process. The main degradation pathway of diuron by ozonation involved a series of dechlorination-hydroxylation, dealkylation and oxidative opening of the aromatic ring processes, leading to small organic species and inorganic species. The degradation efficiency of diuron increased with decreasing initial diuron concentration. Higher pH value, more ozone dosage, additive Na₂CO₃, additive NaHCO₃ and additive H₂O₂ were all advantageous to improve the degradation efficiency of diuron.     

Photo-Fenton-assisted ozonation of p-Coumaric acid in aqueous solution

The degradation of p-Coumaric acid present in olive oil mill wastewater was investigated as a pretreatment stage to obtain more easily biodegradable molecules, with lower toxicity that facilitates subsequent anaerobic digestion. Thus, photo-Fenton-assisted ozonation has been studied and compared with ozonation at alkaline pH and conventional single ultraviolet (UV) and acid ozonation treatments. In the combined process, the overall kinetic rate constant was split into various components: direct oxidation by UV light, direct oxidation by ozone and oxidation by hydroxyl radicals. Molecular and/or radical ozone reaction was studied by conducting the reaction in the presence and absence of tert-butylalcohol at pHs 2, 7 and 9. Ozone oxidation rate increases with pH or by the addition of Fenton reagent and/or UV radiation due to generation of hydroxyl radicals, *OH. Hydrogen peroxide and ferrous ion play a double role during oxidation since at low concentrations they act as initiators of hydroxyl radicals but at high concentrations they act as radical scavengers. Finally, the additional levels of degradation by formation of hydroxyl radicals have been quantified in comparison to the conventional single processes and an equation is proposed for the reaction rate as a function of studied operating variables.     

臭氧光催化降解水中甲醛的研究

研究比较了3种光化学方法对水中低浓度甲醛的降解效果,考察了初始pH值、甲醛浓度和臭氧投加速率等因素对臭氧光催化(TiO_2/UV/O_3)降解甲醛的影响。结果表明,紫外臭氧(UV/O_3)、光催化(TiO_2/UV)和TiO_2/UV/O_3对甲醛的降解均符合表观一级反应动力学,TiO_2/UV/O_3降解甲醛的一级表观速率常数大于TiO_2/UV与UV/O_3之和,说明臭氧、光催化有明显的协同作用。pH值对臭氧光催化降解甲醛的速率几乎没有影响;甲醛初始浓度增加,表观反应速率常数下降,但甲醛的绝对去除量仍随初始浓度的增加而显著增加;臭氧投加速率增加,降解速率增加。甲醛降解的主要中间产物为甲酸,但甲酸在臭氧光催化反应过程中也快速降解而被矿化,说明臭氧光催化是一种能安全有效去除甲醛的方法。     

水溶液中活性艳红KE-3B的臭氧超声联合脱除

采用臭氧/超声联合技术去除模拟废水中的活性艳红KE-3B。臭氧/超声处理前后KE-3B的紫外可见吸收谱没有明显的变化。臭氧/超声联合作用、单独臭氧化和单独超声处理脱除活性艳红KE-3B模拟废水5 min后的去除率分别为97%、73%和5%,表明臭氧/超声联合降解活性染料具有更高的氧化速率。实验研究了pH值、臭氧投加量、超声能量密度、反应温度对超声/臭氧降解活性艳红KE-3B反应速率的影响,在实验研究范围内,随着溶液初始pH的增大,KE-3B的去除率先增大后减小,超声能量密度的改变对KE-3B的去除影响不大,温度升高有利于氧化反应的进行。在溶液初始pH值为9.0,臭氧投加量3.2 g/h,超声能量密度176 W/L,反应温度20℃时,浓度为100 mg/L的活性艳红KE-3B溶液的去除率最高。     

Mineralization of C.I. Reactive Yellow 84 in aqueous solution by sonolytic ozonation

The operational parameters and mechanism of mineralization of C.I. Reactive Yellow 84 (RY84), one of the azo dyes, in aqueous solution were investigated using sonolytic ozonation (US/O(3) oxidation). Of the pseudo-first-order degradation rate constants of TOC reduction, 9.0 x 10(-4), 7.3 x 10(-3) and 1.8 x 10(-2)min(-1) were observed with US, O3, and a combination of US and O3, respectively. These results illustrate that ozonation combined with sonolysis for removal of TOC is more efficient than ozonation alone or ultrasonic irradiation alone without considering the operating costs. With the initial pH value at 10.0, the ozone dose at 4.5 g h(-1), the energy density of ultrasound at 176 W l(-1), and the initial concentration of RY84 at 100 mg l(-1), the extent of mineralization measured as TOC loss was maximized. The variation of the concentrations of related ions (oxalate, formate, acetate, NO3(-), NO2(-), NH4(+), Cl(-), and SO4(2-)) during the reaction process was monitored. Other organic intermediates detected by GC/MS were N-methyleneaniline, phthalic acid, 4-hydroxyphthalic acid, isocyanatobenzene, aniline, 4-iminocyclohexa-2,5-dien-1-one, butene diacid and urea. Based on these findings, a tentative degradation pathway was proposed.     

Fenton氧化水中间氯硝基苯的动力学与机制研究

结合Fenton氧化反应动力学模型研究了Fenton氧化水中间氯硝基苯(m-ClNB)的影响因素和降解机制.结果表明:(1)反应初始pH、H2O2浓度、Fe2+浓度、污染物初始浓度和反应温度对m-ClNB的降解均有明显影响.在反应初始pH为3.5、m-ClNB初始摩尔浓度为0.444mmol/L、H2O2摩尔浓度为21.55mmol/L、Fe2+摩尔浓度为0.054mmol/L、反应温度为(25土1)℃的条件下,m-ClNB的去除效果较好.(2)建立了Fenton氧化m-ClNB的准一级反应动力学模型,且m-ClNB的降解与该模型拟合良好.基于不同反应温度时的准一级反应速率常数(kap),得到了m-ClNB降解的阿累尼乌斯公式,且活化能为36.51kJ/mol.(3)气相色谱(GC)/质谱(MS)和高效液相色谱(HPLC)/MS分析表明,Fenton氧化m-ClNB的主要产物有4-氯-2-硝基苯酚及其同分异构体、羟基乙酸、草酸、丁二酸、丙二酸、6-氯己酸、乙醛酸、2,2-二羟基丙二酸和2-乙基丙二酸等.     

Degradation of anthraquinone dye C.I. Reactive Blue 19 in aqueous solution by ozonation

This study investigated the degradation of anthraquinone reactive dye C.I. Reactive Blue 19 (RB-19) with initial concentration of 100 mg L⁻¹ in aqueous solution by ozone oxidation. The results of UV/VIS and FTIR spectra showed that the anthraquinone structures, nitrogen linkages and amino groups of RB-19 were destroyed under direct ozone reaction. The identification by LC–MS and GC–MS analyses indicated that some organic acids (e.g., phthalic acids) and 1,3-indanone could be the primary degradation products, respectively. The Microtox toxicity of the ozonated RB-19 solution initially increased but subsequently decreased when ozonation time increased. This detoxification accompanied biodegradability enhancement revealed by BOD/COD ratio increasing from 0.15 to 0.33 after 10 min of ozonation.     

Ozonation of metoprolol in aqueous solution: ozonation by-products and mechanisms of degradation

This study investigated the degradation pathway of metoprolol, a widely used β-blocker, in the ozonation via the identification of generated ozonation by-products (OPs). Structure elucidation of OPs was performed using HPLC coupled with quadrupole time-of-flight high-resolution mass spectrometry. Seven OPs were identified, and four of these have not been reported elsewhere. Identified OPs of metoprolol included aromatic ring breakdown by-products; aliphatic chain degraded by-products and aromatic ring mono-, di-, and tetrahydroxylated derivatives. Based on the detected OPs, metoprolol could be degraded through aromatic ring opening reaction via reaction with ozone (O₃) and degradation of aliphatic chain and aromatic ring via reaction with hydroxyl radical (?OH).     

Decomposition of 2-nitrophenol in aqueous solution by ozone and UV/ozone processes.

The decomposition of 2-nitrophenol in aqueous solutions by ozone and UV/ozone processes was found to be technically feasible under adequate experimental conditions. Formation of nitrate ions was observed following the decomposition of 2-nitrophenol by ozone and UV/ ozone processes. Increasing ozone dosage and UV light intensity accelerated the decomposition rate of 2-nitrophenol in an aqueous solution. The species distribution of 2-nitrophenol under various solution conditions plays a significant role in determining decomposition behavior. In most experiments conducted in this study, the decomposition of 2-nitrophenol by ozone and UV/ozone processes was favored to occur in alkaline conditions. The addition of 2-butanol accelerated the rate of gaseous ozone transfer to an aqueous phase by reducing the surface tension of aqueous solution and therefore enhancing the decomposition rate of 2-nitrophenol by ozone and UV/ozone processes.     

Synergy of ozonation and photocatalysis to mineralize low concentration 2,4-dichlorophenoxyacetic acid in aqueous solution

Concentration of 2,4-dichlorophenoxyacetic acid (2,4-D) may affect its degradation kinetics in advanced oxidation systems, and combinations of two or more systems can be more effective for its mineralization at low concentration levels. Degradations and mineralizations of 0.045mM 2,4-D using O(3), O(3)/UV, UV/TiO(2) and O(3)/UV/TiO(2) systems were compared, and influence of reaction temperature on the mineralization in O(3)/UV/TiO(2) system was investigated. 2,4-D degradations by O(3), O(3)/UV and UV/TiO(2) systems were similar to the results of earlier investigations with higher 2,4-D concentrations. The degradations and total organic carbon (TOC) removals in the four systems were well described by the first-order reaction kinetics. The degradation and removal were greatly enhanced in O(3)/UV/TiO(2) system, and further enhancements were observed with larger O(3) supplies. The enhancements were attributed to hydroxyl radical (()OH) generation from more than one reaction pathway. The degradation and removal in O(3)/UV/TiO(2) system were very efficient with reaction temperature fixed at 20 degrees C. It was suspected that reaction temperature might have influenced ()OH generation in the system, which needs further attention.     

铁及铁铜氧化物对臭氧氧化酸性红B的催化效能

采用自蔓延溶胶凝胶法分别制备了铁氧化物和铁铜复合氧化物催化剂,以酸性红B为降解对象,对比了单独臭氧氧化、铁氧化物和铁铜复合氧化物催化臭氧氧化对酸性红B的降解效果,考察了磁力搅拌速度(500～1 640 r/min)、溶液pH(3～11)、臭氧投加速率(3.55～28.4 mg/min)对铁铜复合氧化物催化性能的影响。结果表明,与单独臭氧氧化比较,铁氧化物和铁铜复合氧化物均能加速酸性红B的降解,促进色度和COD的去除,结合催化剂的表征结果,推断催化剂表面羟基促进臭氧分解产生.OH是其氧化性能较好的主要原因,另外,催化剂的吸附能力对催化性能也有一定影响。随着磁力搅拌速度、溶液pH、臭氧投加速率的增大,铁铜复合氧化物催化臭氧氧化酸性红B的效果越好。     

Decomposition of trichloroethylene and 2,4-dichlorophenol by ozonation in several organic solvents

The effects of chemical characteristics of organic solvents on the decomposition rate constants of undissociative trichloroethylene (TCE) and dissociative 2,4-dichlorophenol (2,4-DCP) by ozonation were studied. The TCE and 2,4-DCP decomposition by ozonation in organic solvents followed to the first-order reaction kinetics with respect to TCE or 2,4-DCP concentration. The orders of the rate constants among organic solvents for undissociative TCE and dissociative 2,4-DCP were different indicating that the ozonation rates for undissociative and dissociative compounds were dependent on the chemical property of organic solvent. The decomposition of undissociative TCE by ozonation was a simple electrophilic reaction, which was dependent on acceptor number (AN) of the solvent. On the other hand, the decomposition of dissociative 2,4-DCP was dependent on by the dissociation of the compounds and would be dependent on donor number (DN) of the solvent. Finally, TCE in acetic acid was transformed to chlorinated intermediates and chloride ion and then these intermediates were continuously oxidized to chlorine gas.     

介质阻挡放电联合催化臭氧化降解甲苯

采用介质阻挡放电区后结合MnOx/Al2O3/发泡镍去除甲苯,考察甲苯进气方式、臭氧产生方法及湿度对甲苯与O3同时去除的影响。结果表明,O3是等离子体区后催化降解甲苯的主要物种,介质阻挡放电联合催化臭氧化可实现甲苯及O3的同时高效去除。输入电压为9.0 kV时,甲苯的去除效率达92.8%,在80 min内O3的去除效率维持在99%以上。水蒸气对催化剂催化分解臭氧的活性没有直接的影响,O3浓度较高时湿度对甲苯降解效率的影响很小。GC-MS分析结果表明,甲苯降解的主要气相副产物有烷烃、酸、酮和含苯环有机物,提出了甲苯的降解途径。     

天然锰矿催化臭氧氧化降解水中4-氯酚的研究

以天然锰矿为金属催化剂,研究了锰矿催化臭氧氧化水中4-氯酚的降解效果。采用毛细管电泳方法及色质联用技术．分别对反应的中间产物和终产物进行了分析。推测了锰矿催化臭氧氧化水中4-氯酚的降解反应机理可能为：锰矿的吸附氧化与锰矿生成的Mn^2 催化臭氧分解．产生更多高活性的羟基自由基．从而提高了臭氧的氧化能力。     

Catalytic activity of Ru/Al2O3 for ozonation of dimethyl phthalate in aqueous solution

With dimethyl phthalate as the model pollutant and Ru/Al(2)O(3) as catalyst, this paper systemically investigates the removal of total organic carbon (TOC) of system. Our results have confirmed that Ru/Al(2)O(3) can significantly increase the effect of ozonation. TOC removal in 120 min can reach 72% while only 24% with ozone alone. The optimal catalyst preparing condition was 0.1 wt% Ru content, 600 degrees C calcination temperature, 0.5-1.0mm particle diameter, which is characterized by a high surface area and a large population of surface active sites. The contrasting experiments of ozone alone, catalyst adsorption after ozonation, and catalytic ozonation confirmed that catalytic reaction was the most important process to TOC removal in system with Ru/Al(2)O(3) as catalyst.     

催化臭氧氧化染料溶液的研究

采用催化臭氧化技术降解染料废水,以甲基紫溶液为目标污染物,研究了过渡型金属离子的类型,Fe2+的浓度,溶液初始pH值,染料浓度和正丁醇等因素对其降解率的影响。实验结果表明:臭氧氧化甲基紫溶液的过程中,加入一定浓度的过渡型金属离子对甲基紫的去除具有促进作用;当臭氧浓度为16 mg/L,一定浓度范围内,Fe2+催化臭氧化的效果随着浓度的增加而增加,但Fe2+浓度为13 mg/L时,甲基紫的降解率下降;在酸性范围时,pH值增大其降解率会减小;染料浓度增加,甲基紫的降解率减小,但是其绝对降解值会增加;正丁醇的加入抑制氧化反应的进行,甲基紫的降解率下降,说明催化臭氧化过程中有羟基自由基产生。染料降解过程符合一级反应动力学规律。     

Fe and UV-enhanced ozonation of chlorophenolic compounds in aqueous medium

Mono-, di- and trichlorophenol including different isomers were degraded by O₃, O₃ + UV and O₃ + UV + Fe³⁺. Disappearance rates are nearly identical among three ozonations. Whereas TOC elimination was not completed by ozone alone. UV illumination accelerated TOC elimination rate and the addition of Fe³⁺ (O₃ + UV + Fe³⁺) further accelerated it. TOC elimination rates among different chlorophenols were in the order of mono > di > tri. The effect of Fe³⁺ was largest on the degradation of trichlorophenol. Hydroxylated aromatics, organic acids, formaldehyde and acetone were detected as intermediates.     

Copper complexation by tannic acid in aqueous solution

The speciation of titrated copper in a dissolved tannic acid (TA) solution with an initial concentration of 4 mmol organic carbon (OC)/l was investigated in a nine-step titration experiment (Cu/OC molar ratio = 0.0030–0.0567). We differentiated between soluble and insoluble Cu species by 0.45 μm filtration. Measurements with a copper ion selective electrode (ISE) and diffusive gradients in thin films (DGT) were conducted to quantify unbound Cu(II) cations (‘free’ Cu) and labile soluble Cu complexes. For the DGT measurements, we used an APA hydrogel and a Chelex 100 chelating resin (Na form). Insoluble organic Cu complexes (>0.45 μm) was the dominant Cu species for Cu/OC = 0.0030–0.0567 with a maximum fraction of 0.96 of total Cu. At Cu/OC > 0.0100, Cu-catalysed degradation of aggregate structures resulted in a strong increase of free Cu and (labile) soluble Cu complexes with a maximum fraction of 0.28 and 0.32 of total Cu, respectively. Labile (i.e. DGT-detectable) soluble Cu complexes had a relatively high averaged diffusion coefficient (D) in the APA hydrogel (3.50 × 10⁻⁶– 5.58 × 10⁻⁶ cm² s⁻¹).