Removal of arsenic from drinking water by chemical precipitation--a modeling and simulation study of the physical-chemical processes.

A dynamic mathematical model was developed for removal of arsenic from drinking water by chemical coagulation-precipitation and was validated experimentally in a bench-scale set-up. While examining arsenic removal efficiency of the scheme under different operating conditions, coagulant dose, pH and degree of oxidation were found to have pronounced impact. Removal efficiency of 91-92% was achieved for synthetic feed water spiked with 1 mg/L arsenic and pre-oxidized by potassium permanganate at optimum pH and coagulant dose. Model predictions corroborated well with the experimental findings (the overall correlation coefficient being 0.9895) indicating the capability of the model in predicting performance of such a treatment plant under different operating conditions. Menu-driven, user-friendly Visual Basic software developed in the study will be very handy in quick performance analysis. The simulation is expected to be very useful in full-scale design and operation of the treatment plants for removal of arsenic from drinking water.     

Arsenic species and leachability in the fronds of the hyperaccumulator Chinese brake (Pteris vittata L.)

Arsenic speciation is important not only for understanding the mechanisms of arsenic accumulation and detoxification by hyperaccumulators, but also for designing disposal options of arsenic-rich biomass. The primary objective of this research was to understand the speciation and leachability of arsenic in the fronds of Chinese brake (Pteris vittata L.), an arsenic hyperaccumulator, with an emphasis on the implications for arsenic-rich biomass disposal. Chinese brake was grown for 18 weeks in a soil spiked with 50 mg As kg(-1) as arsenate (AsO4(3-)), arsenite (AsO3(3-)), dimethylarsinic acid (DMA), or methylarsonic acid (MMA). Plant samples were extracted with methanol/water (1:1) and arsenic speciation was performed using high performance liquid chromatography coupled with atomic fluorescence spectrometry. The impacts of air-drying on arsenic species and leachability in the fronds were examined in the laboratory. After 18 weeks, water-soluble arsenic in soil was mainly present as arsenate with little detectable organic species or arsenite regardless of arsenic species added to the soil. However, arsenic in the fronds was primarily present as inorganic arsenite with an average of 94%. Arsenite re-oxidation occurred in the old fronds and the excised dried tissues. Arsenic species in the fronds were slightly influenced by arsenic forms added to the soil. Air-drying of the fronds resulted in leaching of substantial amounts of arsenic. These findings can be of significance when looking at disposal options of arsenic-rich biomass from the point of view of secondary contamination.     

High-level arsenite removal from groundwater by zero-valent iron

The objectives of this study were to conduct batch and column studies to (i) assess the effectiveness of zero-valent iron for arsenic remediation in groundwater, (ii) determine removal mechanisms of arsenic, and (iii) evaluate implications of these processes with regard to the stability of arsenic and long-term remedial performance of the permeable reactive barrier (PRB) technology. A high concentration arsenic solution (50 mg l(-1)) was prepared by using sodium arsenite (arsenic (III)) to simulate groundwater at a heavily contaminated Superfund site in the USA. Batch studies indicate that the removal of arsenic is a two-step reaction with fast initial disappearance of arsenite followed by a slow subsequent removal process. Flow-through columns were conducted at a flow rate of 17 ml h(-1) under reducing conditions for 6.6 mo. Kinetic analysis suggested that arsenic removal behaves as a zero-order reaction at high arsenic concentrations. Arsenic removal rate constants decreased with time and arsenic breakthrough was observed in the column study. Arsenic removal capacity of zero-valent iron was determined to be approximately 7.5 mg As/g Fe. Carbonate green rust was identified from the analysis of surface precipitates; arsenite uptake by green rust may be a major mechanism responsible for arsenic remediation by zero-valent iron. Analysis of HCl-extractable arsenic from iron samples indicated that approximately 28% of arsenic was in the form of arsenate suggesting that a surface oxidation process was involved in the arsenic removal with zero-valent iron.     

混凝沉淀法处理含砷选矿废水

某钨矿含砷选矿废水砷含量高且砷以As(V)为主要存在形态,采用混凝沉淀法处理,详细考察了生石灰、硫酸亚铁和六水三氯化铁3种混凝剂对废水中砷的去除效果。实验结果表明,在PAM投加量40 mg/L,静沉时间60 min条件下,比较分析3种混凝剂对砷的去除效果,三氯化铁为最佳除砷混凝剂。三氯化铁最佳除砷工艺条件为:pH 7.5,三氯化铁投加量986.67 mg/L,混凝反应时间25 min,PAM投加量为40 mg/L,静沉60 min,含砷选矿废水经该工艺处理后,砷去除率可达99.14%,出水砷浓度降至0.361 mg/L,达到国家污水综合排放标准(GB8978-1996)。     

Evaluating of arsenic(V) removal from water by weak-base anion exchange adsorbents

Arsenic contamination of groundwater has been called the largest mass poisoning calamity in human history and creates severe health problems. The effective adsorbents are imperative in response to the widespread removal of toxic arsenic exposure through drinking water. Evaluation of arsenic(V) removal from water by weak-base anion exchange adsorbents was studied in this paper, aiming at the determination of the effects of pH, competing anions, and feed flow rates to improvement on remediation. Two types of weak-base adsorbents were used to evaluate arsenic(V) removal efficiency both in batch and column approaches. Anion selectivity was determined by both adsorbents in batch method as equilibrium As(V) adsorption capacities. Column studies were performed in fixed-bed experiments using both adsorbent packed columns, and kinetic performance was dependent on the feed flow rate and competing anions. The weak-base adsorbents clarified that these are selective to arsenic(V) over competition of chloride, nitrate, and sulfate anions. The solution pH played an important role in arsenic(V) removal, and a higher pH can cause lower adsorption capacities. A low concentration level of arsenic(V) was also removed by these adsorbents even at a high flow rate of 250–350 h^?1. Adsorbed arsenic(V) was quantitatively eluted with 1 M HCl acid and regenerated into hydrochloride form simultaneously for the next adsorption operation after rinsing with water. The weak-base anion exchange adsorbents are to be an effective means to remove arsenic(V) from drinking water. The fast adsorption rate and the excellent adsorption capacity in the neutral pH range will render this removal technique attractive in practical use in chemical industry.     

Recycling of nickel smelter slag for arsenic remediation—an experimental study

In this study, recycled Ni smelter slag has been used as a reactive medium for arsenic (As) removal from aqueous solutions. The results of the study showed that 10.16–11.43-cm long columns containing 451–550 g of slag operated for at least 65 days were able to remove 99–100 % As species from continuously flowing contaminated water at an initial As concentration of 10 mg/L. The removal capacities were found to be 1.039 to 1.054 mg As per g of slag. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy data also showed that electrostatic attraction and oxidation–reduction reactions between As species and mixed iron oxides present in the slag were the main mechanisms for the removal of arsenic from aqueous solutions. Theoretical multiplet analysis of XPS data revealed that the amount of goethite in the slag increased from 22 to 60 % during arsenic removal by adsorption and the percentage of magnetite decreased from 50 to 40 %. These changes indicate that redox-mediated reactions occurred as part of the As(V) removal process. Raman spectroscopy studies confirmed that, in addition to surface reactions, internal interactions between the slag and arsenic also occurred. The findings of the study suggest that recycled Ni smelter slag could be an effective low-cost reactive medium for a subsurface remediation system, such as a permeable reactive barrier. Recycling of waste material (slag) for the removal of another waste (arsenic) can significantly reduce the environmental footprint of metallurgical operations and hence contribute to sustainable development. Such recycling also decreases slag disposal costs and eliminates the need to purchase commercial reactive material or obtain expensive natural material for remediation purposes.     

Enhanced solubilization of arsenic and 2,3,4,6 tetrachlorophenol from soils by a cyclodextrin derivative

The application of extracting aqueous solutions with cyclodextrins in several soil remediation technologies has been increasingly studied but little is known about their removal capacities toward the inorganic species. Herein, the effectiveness of cyclodextrins (CDs) in extracting arsenic, copper, and iron from a mining soil is presented. In a preliminary test of four types of CD aqueous solutions, only the addition of carboxylmethyl-beta-cyclodextrin CMCD (a cyclodextrin derivative) led to a significant enhancement in arsenic removal. An increase in the concentration of copper and iron in the leachates was also observed with CMCD. Kinetic study of arsenic release was carried out at two temperatures (20 and 35 degrees C). The arsenic concentration in the leachates increases with increasing cyclodextrin concentration. At an 80 mM CMCD concentration, arsenic, copper, and iron released in filtrates were about 20-, 1,000-, and 4,000-fold greater, respectively, than that obtained using deionized water. In the soil system, the CMCD capacity removal was found to be higher for cations than for arsenic. Because the tetrachlorophenol can co-occur with arsenic and copper in several contaminated sites, its solubilization by CMCD was also investigated. Extraction experiments were performed to extract 2,3,4,6 tetrachlorophenol (TeCP) in spiked soil with CMCD. The results of batch experiments have shown that CMCD could significantly increase the TeCP extraction from soil. CD sorption on soils as quantified by a fluorescence technique was low, indicating no significant loss of CD during the leaching experiments. The use of CMCD as a flushing agent to enhance the removal of both inorganic and organic pollutants from mixed-contaminated soils appears as a promising remediation method.     

Measurement of arsenic compounds in littoral zone algae from the Western Mediterranean Sea. Occurrence of arsenobetaine

The determination of arsenic compounds in algae collected on the Catalan coast (Western Mediterranean) is reported. Ten algae species and the seagrass Posidonia oceanica were analyzed. Total arsenic in the samples was determined by microwave digestion and inductively coupled plasma mass spectrometry (ICPMS). Arsenic speciation in water extracts of samples was analyzed by liquid chromatography with both anionic and cationic exchange with ICPMS detection (LC-ICPMS). The total arsenic content of the algae samples ranged from 2.96 to 39.0mg As kg(-1). The following compounds were detected: arsenite (As(III)), arsenate (As(V)), methylarsonate (MA), dimethylarsinate (DMA), sulfonate sugar (SO3-sug), sulfate sugar (SO4-sug), phosphate sugar (PO4-sug), arsenobetaine (AB), arsenocholine (AC), trimethylarsine oxide (TMAO) and glycerol sugar (Gly-sug). The main arsenic species found were arsenosugars. Significant percentages of arsenobetaine (0.54 mg As kg(-1), 28% of the extractable arsenic and 0.39 mg As kg(-1), 18% of the extractable arsenic) were found in Ulva rigida and Enteromorpha compressa. These results are discussed in relation to the presence of epiphytes.     

Effects of heavy metals on growth and arsenic accumulation in the arsenic hyperaccumulator Pteris vittata L

The effects of Cd, Ni, Pb, and Zn on arsenic accumulation by the arsenic hyperaccumulator Pteris vittata were investigated in a greenhouse study. P. vittata was grown for 8 weeks in an arsenic-contaminated soil (131 mg As kg(-1)), which was spiked with 50 or 200 mg kg(-1) Cd, Ni, Pb, or Zn (as nitrates). P. vittata was effective in taking up arsenic (up to 4100 mg kg(-1)) and transporting it to the fronds, but little of the metals. Arsenic bioconcentration factors ranged from 14 to 36 and transfer factors ranged from 16 to 56 in the presence of the metals, both of which were reduced with increasing metal concentration. Fern biomass increased as much as 12 times compared to the original dry weight after 8 weeks of growth (up to 19 g per plant). Greater concentrations of Cd, Ni, and Pb resulted in greater catalase activity in the plant. Most of the arsenic in the plant was present as arsenite, the reduced form, indicating little impact of the metals on plant arsenic reduction. This research demonstrates the capability of P. vittata in hyperaccumulating arsenic from soils in the presence of heavy metals.     

The two-phase leaching of Pb, Zn and Cd contaminated soil using EDTA and electrochemical treatment of the washing solution

The feasibility of a novel two-phase method for remediation of Pb (1374 mg kg(-1)), Zn (1007 mg kg(-1)), and Cd (9.1 mg kg(-1)) contaminated soil was evaluated. In the first phase we used EDTA for leaching heavy metals from the soil. In the second phase we used an electrochemical advanced oxidation process (EAOP) for the treatment and reuse of washing solution for soil rinsing (removal of the soil-retained, chelant-mobilized metallic species). In EAOP, a boron-doped diamond anode was used for the generation of hydroxyl radicals and oxidative decomposition of EDTA-metal complexes at a constant current density (15 mA cm(-2)). The released metals were removed from the solution by filtration as insoluble participate and by electro-deposition on the cathode. Four consecutive additions of 5.0 mm ol kg(-1) EDTA (total 20 mmol kg(-1)) removed 44% Pb, 14% Zn and 35% Cd from the soil. The mobility of the Pb, Zn and Cd (Toxicity Characteristic Leaching Procedure) left in the soil after remediation was reduced by 1.6, 3.4 and 1.5 times, respectively. The Pb oral availability (Physiologically Based Extraction Test) in the simulated stomach phase was reduced by 2.4 and in the intestinal phase by 1.7 times. The discharge solution was clear, almost colorless, with pH 7.73 and 0.47 mg L(-1) Pb, 1.03 mg L(-1) Zn, bellow the limits of quantification of Cd and 0.023 mM EDTA. The novel method enables soil leaching with small water requirements and no wastewater generation or other emissions into the environment.     

Zinc tolerance and accumulation in Pteris vittata L. and its potential for phytoremediation of Zn- and As-contaminated soil

A field investigation and pot experiments were conducted to determine the potential of arsenic (As) hyperaccumulator, Pteris vittata L., to remediate sites co-contaminated with zinc (Zn) and As. We found that P. vittata L. had a very high tolerance to Zn and grew normally at sites with high Zn concentrations. In addition, P. vittata L. could effectively take up Zn into its fronds, with a maximum of 737 mg kg(-1) under field conditions. In pot experiments, the accumulated Zn concentration increased significantly as the Zn treatment was raised from 0 to 2000 mg kg(-1), with a maximum Zn accumulation of 0.22 mg pot(-1). Although the concentration of As in P. vittata L. was reduced by the addition of Zn, total frond accumulation of As was elevated when the Zn treatment was increased from 0 to 1000 mg kg(-1), with a maximum As accumulation of 8.3 mg pot(-1) in the presence of 1000 mg kg(-1) Zn. The high Zn tolerance, relatively high ability to accumulate Zn, and great capacity to accumulate As under conditions of suppression by high Zn suggest that P. vittata L. could be useful for the remediation of sites co-contaminated with Zn and As.     

Arsenic contamination of soils and agricultural plants through irrigation water in Nepal

This study monitored the influence of arsenic-contaminated irrigation water on alkaline soils and arsenic uptake in agricultural plants at field level. The arsenic concentrations in irrigation water ranges from <0.005 to 1.014 mg L(-1) where the arsenic concentrations in the soils were measured from 6.1 to 16.7 mg As kg(-1). The arsenic content in different parts of plants are found in the order of roots>shoots>leaves>edible parts. The mean arsenic content of edible plant material (dry weight) were found in the order of onion leaves (0.55 mg As kg(-1))>onion bulb (0.45 mg As kg(-1))>cauliflower (0.33 mg As kg(-1))>rice (0.18 mg As kg(-1))>brinjal (0.09 mg As kg(-1))>potato (<0.01 mg As kg(-1)).     

Conditions for effective removal of pyrene from an artificially contaminated soil using Pseudomonas aeruginosa 57SJ rhamnolipids

The efficacy of a new rhamnolipid biosurfactants mixture to enhance the removal of pyrene from a soil artificially contaminated was investigated. The molar solubilization ratio (MSR) and the partition coefficient between the micelles and water (log K(m)) were found to be 7.5 x 10(-3) and 5.7, respectively. From soil column studies, the pyrene removal increased linearly with the concentration of the injected biosurfactants solution above the effective critical micellar concentration (0.4 g L(-1)). Flushing with a 5.0 g L(-1) biosurfactants solution increased the pyrene concentration in the effluent by 178 times. At high biosurfactants' concentrations (2.5 and 5.0 g L(-1)), the cumulative pyrene recovery reached 70%. This pyrene remobilization takes place independently of the soil organic carbon solubilization. This study provides a combination of batch and column experiments in order to find the conditions for effective soil remediation using a new rhamnolipids mixture.     

Spatial variability of arsenic and chromium in the soil water at a former wood preserving site

Contamination of industrial sites by wood preservatives such as chromated copper arsenate (CCA) may pose a serious threat to groundwater quality. The objective of this study was to characterise the spatial variability of As and Cr concentrations in the solid phase and in the soil water at a former wood impregnation plant and to reveal the fundamental transport processes. The soil was sampled down to a depth of 2m. The soil water was extracted in situ from the vadose zone over a period of 10 months at depths of 1 and 1.5m, using large horizontally installed suction tubes. Groundwater was sampled from a depth of 4.5m. Results showed that arsenic and chromium had accumulated in the upper region of the profile and exhibited a high spatial variability (As: 21-621 mg kg(-1); Cr: 74-2872 mg kg(-1)). Concentrations in the soil water were high (mean As 167 microg L(-1); Cr: 62 microg L(-1)) and also showed a distinct spatial variability, covering concentration ranges up to three orders of magnitude. The variability was caused by the severe water-repellency of the surface soil, induced by the concurrent application of creosote wood preservatives, which leads to strong preferential flow as evident from a dye experiment. In contrast to soil water concentrations, only low As concentrations (<12 microg L(-1)) were detected in the groundwater. High Cr concentrations in the groundwater (approx. 300 microg L(-1)), however, illustrated the pronounced mobility of chromium. Our study shows that at sites with a heterogeneous flow system in the vadose zone a disparity between flux-averaged and volume-averaged concentrations may occur, and sampling of soil water might not be adequate for assessing groundwater concentrations. In these cases long-term monitoring of the groundwater appears to be the best strategy for a groundwater risk assessment.     

Removal of TNT and RDX from water and soil using iron metal

Contaminated water and soil at active or abandoned munitions plants is a serious problem since these compounds pose risks to human health and can be toxic to aquatic and terrestrial life. Our objective was to determine if zero-valent iron (Fe(0)) could be used to promote remediation of water and soil contaminated with 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). As little as 1% Fe(0) (w/v) removed 70 mg TNT litre(-1) from aqueous solution within 8 h and removed 32 mg RDX litre(-1) within 96 h. Treating slurries (1:5 soil:water) of highly contaminated soil (5200 mg TNT and 6400 mg RDX kg(-1) soil) from the former Nebraska Ordnance Plant (NOP) with 10% Fe(0) (w/w soil) reduced CH(3)CN-extractable TNT and RDX concentrations below USEPA remediation goals (17.2 mg TNT and 5.8 mg RDX kg(-1)). Sequential treatment of a TNT-contaminated solution (70 mg TNT litre(-1) spiked with (14)C-TNT) with Fe(0) (5% w/v) followed by H(2)O(2) (1% v/v) completely destroyed TNT and removed about 94% of the (14)C from solution, 48% of which was mineralized to (14)CO(2) within 8 h. Fe(0)-treated TNT also was more susceptible to biological mineralization. Our observations indicate that Fe(0) alone, Fe(0) followed by H(2)O(2), or Fe(0) in combination with biotic treatment can be used for effective remediation of munitions-contaminated water and soil.     

微涡旋絮凝-逆流气浮-纳滤集成工艺去除水中腐殖酸的动态运行特征

通过微涡旋絮凝逆流气浮-纳滤集成工艺的动态试验研究,确定其运行周期为72 h,能很好地去除水中腐殖酸有机物,但不同纳滤膜组成的集成工艺处理效果不同.采用PACl絮凝剂处理水样2时,以流程1运行的含TQ56-36FC型纳滤膜的集成工艺出水的高锰酸盐指数为0.45 mg/L,UV254nm在0.003 3左右波动,且有95%以上的脱盐率.以流程2运行的含M-N1812A型纳滤膜的集成工艺处理3种水样时的膜清水的高锰酸盐指数在0.75 mg/L左右波动,UV254nm大都远小于0.007 5,有时甚至为0.水样1和水样3的UV254nm平均值为0.005 4,水样2的最低,平均值为0.003 3,脱盐率只有6%～10%.以PACl为絮凝剂时,集成系统有较强的适应原水水质变化的能力.预处理中活性炭柱的存在提高了M-N1812A型纳滤膜清水样的水质,但并没有延长膜的使用周期.这也表明膜的污染更重要的是来自无机物的污染.     

Effects of plant arsenic uptake and heavy metals on arsenic distribution in an arsenic-contaminated soil

This study examined the effects of heavy metals and plant arsenic uptake on soil arsenic distribution. Chemical fractionation of an arsenic-contaminated soil spiked with 50 or 200mg kg(-1) Ni, Zn, Cd or Pb was performed before and after growing the arsenic hyperaccumulator Pteris vittata L for 8weeks using NH(4)Cl (water-soluble plus exchangeable, WE-As), NH(4)F (Al-As), NaOH (Fe-As), and H(2)SO(4) (Ca-As). Arsenic in the soil was present primarily as the recalcitrant forms with Ca-As being the dominant fraction (45%). Arsenic taken up by P. vittata was from all fractions though Ca-As contributed the most (51-71% reduction). After 8weeks of plant growth, the Al-As and Fe-As fractions were significantly (p<0.01) greater in the metal-spiked soils than the control, with changes in the WE-As fraction being significantly (p=0.007) correlated with plant arsenic removal. The plant's ability to solubilize soil arsenic from recalcitrant fractions may have enhanced its ability to hyperaccumulate arsenic.     

砷矿尾砂污染及其治理研究

调查了广东省连南瑶族自治县寨岗铁屎坪土法炼砷废墟及其周边砷污染状况.发现渗流水含砷高达43.72 mg/L,渗流水随雨水沿山坡、溪流流入下游,对周边的水体、土壤、农作物等造成严重污染.同时发现全缘凤尾蕨、龙船蕨、野苎麻、白芒草和接骨草是耐砷植物.模拟试验证实在炼砷废墟和高砷尾砂上种植这些植物可减少砷的迁移,且不致引起二次污染.1998年对铁屎坪土法炼砷废墟进行治理,经一年多跟踪观察,周边水体中砷含量从原来的约0.048 mg/L下降到0.001 06 mg/L.结果表明用植被治理尾砂的砷污染是一种价廉、有效的方法.     

Effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile

The effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile was studied. Two soils were sequentially extracted for arsenic with a five-step method that accounts for the following arsenic forms: non-specifically adsorbed (F1), specifically adsorbed (F2), amorphous and poorly crystallized Fe and Al oxides (F3), well-crystallized Fe and Al oxides (F4) and residual (F5). The arsenic residual fraction was predominant in Pintué soil, whereas in Graneros soil, arsenic was mostly associated to amorphous Fe and Al oxides. Graneros soil exhibited a higher As(V) adsorbing capacity than Pintué soil, which relates to the higher clay and iron and aluminum oxides contents, confirming that these components participation is essential for the adsorption of this metalloid. Biosolid application at a rate of 100Mg ha(-1) caused an increase in arsenic bound to amorphous Fe and Al oxides and in the residual fraction, in Pintué soil. When Pintué soil was spiked with arsenic, aged for two months, and treated with biosolid (100Mg ha(-1)), the content of arsenic in the most labile fractions decreased, thus showing a favorable effect in its application to soils with few specific sites for arsenic adsorption. Arsenic speciation was carried out in the first two fractions of the sequential extraction procedure. As(V) was the main form in both fractions. Biosolid incorporation at a rate of 100Mg ha(-1) caused a significant increase in organic arsenic forms.     

Effects of compost and phosphate on plant arsenic accumulation from soils near pressure-treated wood

Leaching of arsenic (As) from chromated copper arsenate (CCA)-treated wood may elevate soil arsenic levels. Thus, an environmental concern arises regarding accumulation of As in vegetables grown in these soils. In this study, a greenhouse experiment was conducted to evaluate As accumulation by vegetables from the soils adjacent to the CCA-treated utility poles and fences and examine the effects of soil amendments on plant As accumulation. Carrot (Daucus carota L.) and lettuce (Lactuca sativa L.) were grown for ten weeks in the soil with or without compost and phosphate amendments. As expected, elevated As concentrations were observed in the pole soil (43 mg kg(-1)) and in the fence soil (27 mg kg(-1)), resulting in enhanced As accumulation of 44 mg kg(-1) in carrot and 32 mg kg(-1) in lettuce. Addition of phosphate to soils increased As accumulation by 4.56-9.3 times for carrot and 2.45-10.1 for lettuce due to increased soil water-soluble As via replacement of arsenate by phosphate in soil. However, biosolid compost application significantly reduced plant As uptake by 79-86%, relative to the untreated soils. This suppression is possibly because of As adsorbed by biosolid organic mater, which reduced As phytoavailability. Fractionation analysis showed that biosolid decreased As in soil water-soluble, exchangeable, and carbonate fraction by 45%, whereas phosphate increased it up to 2.61 times, compared to the untreated soils. Our results indicate that growing vegetables in soils near CCA-treated wood may pose a risk of As exposure for humans. Compost amendment can reduce such a risk by reducing As accumulation by vegetables and can be an important strategy for remediating CCA-contaminated soils. Caution should be taken for phosphate application since it enhances As accumulation.