Major Health Risk Factors in Iranian Hand-Woven Carpet Industry

This paper reviews the role and importance of small-scale industries together with the issue of occupational health problems and their causes in Iranian hand-woven carpet industry as a typical informal small-scale industry in an industrially developing country. The objective ofthis paper is to review health risk factors and related occupational health and ergonomic problems in the carpet industry. Since the overwhelming majority of weavers’ health problems originate from ergonomic risk factors, it is concluded that any improvement program in this industry should focus on ergonomic aspects. To assess ergonomic conditions in weaving workshops, a checklist has been developed and an ergonomics index indicating the ergonomic conditions of the workshop has been proposed. To test and verify the checklist, 50 weaving workshops were visited and their ergonomic conditions were assessed. Based on the results some modifications were made and the checklist was shown to be an effective tool.     

Office Ergonomics: Deficiencies in Computer Workstation Design

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.     

Office ergonomics: deficiencies in computer workstation design.

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.     

Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the United States part of the international study.

The United States MEPS (musculoskeletal--eyestrain--psychosocial--stress) study consisted of 1 group of 28 female data entry operators. The intervention was in 3 parts: workstation redesign (including advanced ergonomic chairs, motorized adjustable workstations, advanced adjustable keyboards, adjustable copyholders, adjustable footrests, monitor support surfaces) and ergonomic training/coaching and corrective lenses. After the intervention, statistically significant reductions in physical signs (trigger points, neck and shoulder mobility), subjective reports of intensity and frequency of musculoskeletal pain, and subjective reports of visual problems were observed. Static load during the work sample, as assessed by experts, improved after the intervention as did measured postural angles of head and trunk and subjective assessment of users of ergonomic characteristics of the workplaces. For all of these measures, improvements observed 1 month after intervention were also observed in the 1-year follow-up. Trapezius load, as assessed by electromyography (EMG), decreased after intervention, but then increased in the follow-up. The increase was interpreted as a calibration problem.     

Application of a Screening Method in Assessing Occupational Safety and Health of Computer Workstations

Employers and workers need concrete guidance to plan and implement changes in the ergonomics of computer workstations. The Näppärä method is a screening tool for identifying problems requiring further assessment and corrective actions. The aim of this study was to assess the work of occupational safety and health (OSH) government inspectors who used Näppärä as part of their OSH enforcement inspections (430 assessments) related to computer work. The modifications in workstation ergonomics involved mainly adjustments to the screen, mouse, keyboard, forearm supports, and chair. One output of the assessment is an index indicating the percentage of compliance items. This method can be considered as exposure assessment and ergonomics intervention used as a benchmark for the level of ergonomics. Future research can examine whether the effectiveness of participatory ergonomics interventions should be investigated with Näppärä.     

Human factors in process control systems: The design of human–machine interfaces

This paper deals with selected problems of human factors in the design of process control systems. The argument is that although there are already some legal obligations to take human factors into account, practical experience shows that this is not done adequately and sufficiently. Two types of human–machine interfaces are distinguished, i.e. the task interface and the interaction interface. The design philosophy of process engineers seems to aim at automating all safety critical functions, which is called into question based on the available ergonomics evidence. For the interaction interface examples are presented, showing a further substantial neglect of basic human factors principles, which in turn results in increased operator strain during system failures.It is argued that there is a demand for immediate action, i.e. for the application of existing human factors knowledge in process control system design, for a professional evaluation of human factors in process control systems, and for research on possibilities of using new technologies that assist the operator in controlling the process control system.     

An Ergonomics Study of a Semiconductors Factory in an IDC for Improvement in Occupational Health and Safety

The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers’ occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers’ OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.     

Design considerations to enhance the safety of patient compartments in ambulance transporters

The safety of the interior of ambulances is dubious and, in the event of sudden impact during emergency transport, potentially perilous to patients they carry. The workplace ergonomics of the interior of the passenger cabin is lacking. This article discusses an improved ergonomic interior design based on study findings, observations and subjective perception. It suggests design aspects and safety concepts aimed at increasing the safety of patients and paramedic staff inside the ambulance as a mobile workstation.     

机械行业工效学调查研究

对机械行业工人的慢性肌肉骨骼损伤进行了工效学分析。结果表明，目前我国机械行业工人主要存在的工效学问题是：坐椅高度和坐位工作台高度较高，正常作业范围过大，同一动作持续工作时间过长、劳动时间率偏高、工中休息时间偏少。建议根据有关法规和标准，采取工效学改进措施     

Ergonomic assessment of selected workstations on a merchant ship

This study describes some key ergonomic factors within the engine room, navigation bridge and other locations of a merchant ship. Ergonomic assessments were carried out on a crew of a merchant ship. The study examines the importance of factors such as noise, vibration, heat radiation (in machinery areas), psychological stress and ergonomics of the physical arrangement of the navigation bridge. It also addresses the effect of working in confined areas for a long duration and the need to process large amounts of data, decision-making and the influence of specific operating conditions in different areas of a ship. This study includes analysis of workstations, working methods and the burden of environmental factors as well as a discussion of specific marine environmental conditions such as confined working and leisure spaces, long-term family and sociocultural separation, frequent changes in climate and time zones, and temporary physical overload and long-term psychological burdens.     

Ergonomic Program Effectiveness: Ergonomic and Medical Intervention

The implementation of a successful ergonomic and medical intervention program designed to reduce the number and severity of injuries and illnesses and the associated levels of discomfort in the workplace is presented. Because of the recent activity concerning the on-again-off-again Occupational Safety and Health Administration (OSHA) Ergonomic Program Standard questions have been raised as to the value and effectiveness of an organization’s ergonomics program. In light of these concerns, the immense cost associated with work-related injury and illness, and the related pain and suffering associated with such injuries and illnesses, it is important to present a workable and effective ergonomic and medical intervention program. The results of this applied study demonstrate that through the application of an ergonomic and medical intervention program, workplace-related injuries and illnesses can be reduced or eliminated.     

Reducing Musculoskeletal Discomfort: Effects of an Office Ergonomics Workplace and Training Intervention

Effects of an office ergonomics workplace and training intervention on workers’ knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers’ office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers’ office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.     

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder

Background. Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body’s movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. Materials and methods. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. Results. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p?<?0.05). Conclusion. Overall, this study indicated that applying ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.     

基于人因的汽车仪表设计及工效学评价

从仪表设计及工效学问题的典型事故案例分析入手,提出人因化设计的基本理念,给出人机工程学的汽车仪表系统的基本要求及仪表显示装置人因化设计的基本原则、结构体系框图,提出了实现人因化设计的基本思路;探讨了在汽车仪表系统造型设计中如何体现中国元素与特色的途径;构建了汽车仪表设计中工效学评价体系模型。     

Estimating the effectiveness of ergonomics interventions through case studies: implications for predictive cost-benefit analysis

PROBLEM: Cost-benefit analysis (CBA) can help to justify an investment in ergonomics interventions. A predictive CBA model would allow practitioners to present a cost justification to management during the planning stages, but such a model requires reliable estimates of the benefits of ergonomics interventions. METHOD: Through literature reviews and Internet searches, 250 case studies that reported the benefits of ergonomics programs and control measures were collected and summarized. RESULTS: Commonly reported benefits included reductions in the number of work-related musculoskeletal disorders (WMSDs) or their incidence rate, as well as related lost workdays, restricted workdays, and workers' compensation costs. Additional benefits reported were related to productivity, quality, turnover and absenteeism. DISCUSSION: Benefits reported were largely positive, and payback periods for ergonomics interventions were typically less than one year. SUMMARY: The results of this review could be used to develop predictive CBA models for ergonomics programs and individual control measures. IMPACT ON INDUSTRY: Cost-justifying ergonomics interventions prior to implementation may help to secure management support for proposed changes. Numbers used for the benefits side of a cost-benefit analysis (CBA) need to be based on "real world" data in order to be credible. The data presented in this paper may help in the development of simple cost-benefit models for ergonomics programs and control measures.     

新型电焊防护装置的研究和设计

现有的电焊防护装置主要防止强电焊弧光对电焊操作者眼睛的伤害 ,没有考虑电焊弧光对电焊无关人员的伤害。笔者对现有电焊防护装置的使用方式、安全人机学和美学三方面进行了分析 ,提出一种新的电焊防护设计。它不仅可以保护电焊工人 ,而且还能保护与焊接操作无关的人员 ,使他们免受电焊弧光伤害。新型电焊防护装置还具有防止焊渣飞溅、体积小、使用方便、制作成本低等特点。该防护装置能充分满足人的生理和心理需求 ,体现了以人为本的设计理念。     

Ergonomics and Quality Management—Humans in Interaction With Technology,Work Environment,and Organization

Abstract

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate imp ortan t ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elab orate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, in appropriate design of technology, and an unsuitable org an izatio n are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain sup po rt from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.     

Ergonomic Risk Factors for Cumulative Trauma Disorders in VDU Operators

The objectives of this study were to investigate the rate of cumulative trauma disorders (CTDs) in the upper body and to describe the associations of such disorders with ergonomic parameters in a group of data entry operators. A total of 173 data entry operators volunteered to take part in the study. Questionnaires were used to investigate their medical history. Diagnoses of CTDs were made with clinical tests. A visual posture analysis of the workers and an ergonomic analysis of workstations and workload were used to reveal risk factors. Neck and shoulder pain, extensor tendonitis of the wrists and De Quervain’s disease were common in the study population. An assessment of risk factors showed that leaning wrists on the keyboard, hard keystrokes, extreme wrist joint and thumb positions and working in poor ergonomic design were correlated to pain and development of CTDs.