细水雾灭油池火时各种影响因素的相对重要度分析

采用实验的方法并与理论分析相结合，对细水雾在扑灭B类火时，占主导地位的灭火机理进行了研究。实验中发现，当液体燃料的闪点相差较大时，其灭火机理往往不尽相同。并且当细水雾的雾特性相差较大时，在灭火中起主导作用的灭火机理常常也各有不同。因而那种单纯以雾滴的粒径分布作为细水雾扑灭燃料闪点较高的油池火时，雾滴的动量分布对细水雾的灭火有效性影响更大。为此，本文还建立了一个简单的模型，试图得到在这种火灾场景下，对细水雾灭火的临界动量要求。     

泡沫-细水雾雾场特性的试验研究

为了研究泡沫-细水雾与细水雾雾场特性的差异,建立了泡沫-细水雾和细水雾雾场测定系统.利用高速摄像技术、激光器偏光技术、激光粒度分析技术分别对中压工况下的泡沫-细水雾和细水雾雾场参数进行了试验研究.结果表明,雾场形态均保持标准的圆锥状,细水雾和泡沫-细水雾雾场边缘雾化效果较好,雾化效果向中心逐渐变差.系统工作压力对泡沫-细水雾的雾化锥角影响较大,工作压力为1.0 MPa时雾化锥角为51°,工作压力为3.5 MPa时增大到80°.不同压力下细水雾的雾化锥角变化较小,约为80°.泡沫-细水雾锥体中心处的雾流密度与系统工作压力成反比,压力越高,雾场的保护半径越大,雾滴分布越均匀.1.0MPa、1.5 MPa、2.0 MPa、2.5 MPa压力下泡沫-细水雾锥体中心处的雾流密度均大于细水雾锥体中心处的雾流密度.泡沫-细水雾雾滴粒径分布呈现随距喷头垂直距离增大而增大的总体特征,由于泡沫-细水雾雾滴的发泡作用,泡沫-细水雾雾场的雾滴粒径在喷头正下方10～100 cm处均大于细水雾雾场的雾滴粒径.     

工作压力对细水雾雾场特性参数影响的实验研究

为了研究工作压力对细水雾雾场特性参数的影响,针对高、中低压细水雾喷头,测量、计算了不同工作压力下细水雾的雾化锥角、雾通量分布、粒径分布及雾动量,得到了高压细水雾与中低压细水雾雾场特性参数的区别及不同工作压力下细水雾雾场特性参数的变化规律,为细水雾喷头的开发及设计应用提供了相应的实验依据。     

船舶机舱高压细水雾灭火技术机理研究

高压细水雾灭火系统由于具备用水量少、载荷小、对B类火灾灭火效果好的特点,非常适合在船舶机舱上使用。本文通过实验研究高压细水雾的雾场特性,并在此基础上进行一系列实验,重点研究高压细水雾与船舶机舱火灾相互作用的火灾动力学过程,通过适当降低喷嘴和油盆的距离,减小火源功率和增大喷嘴流量系数等措施可以有效增强灭火效果,并对这些措施的灭火机理进行了简要的分析。     

细水雾抑制熄灭K类火有效性的实验研究

本文通过全尺寸模拟实验研究了细水雾与K类火的相互作用,利用LDV／APV激光多普勒分析仪对细水雾特性进行了测量,分析了细水雾的粒径、速度及雾动量对灭火有效性的影响规律。分别改变喷头类型、工作压力、喷头与火源的垂直距离及喷射角度进行多种工况的灭火实验,结果表明,细水雾的灭火有效性随着压力的增大得到明显提高,喷头的雾化性能直接影响着细水雾的灭火有效性,同时喷射角度及喷射距离也影响着细水雾的灭火有效性。本文为细水雾灭火技术用于厨房环境的火灾防护提供了科学的参考依据和必要的设计参数。     

含氯化亚铁添加剂细水雾灭火有效性的实验研究

为了提高常规细水雾的灭火有效性,拓展其应用范围,本文采用小尺度实验的方法,研究了含氯化亚铁添加剂细水雾在不同燃料种类、添加剂浓度、压力下扑灭池火的有效性。实验结果表明：向细水雾中添加氯化亚铁,显著地影响了它的灭火性能;细水雾的灭火时间随着加入的氯化亚铁的质量浓度变化而发生改变,而且存在一个最短灭火时间浓度;细水雾喷头的工作压力和燃料的类型也对细水雾的灭火性能有影响,喷头工作压力越大,细水雾的平均灭火时间越短;在相同的实验条件下,细水雾灭煤油火的时间要短于灭乙醇火的时间。     

大型民机货舱水基哈龙替代抑灭火技术研究进展

依据飞机货舱哈龙替代灭火技术发展趋势和高效灭火重大科技需求,首先阐述了机载细水雾灭火系统的组成及功能,分析了兼容机载供水供氮系统的低压双流体细水雾技术优势;其次综述了低压双流体细水雾喷头研发的技术路线、工况环境和喷头结构对细水雾雾场特性的影响,以及低压双流体细水雾的灭火效能和灭火机理;最后回顾了近年来国内外研究机构在飞机货舱中开展的全尺寸试验验证.基于此,提出对于新一代机载细水雾灭火系统,应强化货舱通风条件对细水雾雾场特性及灭火有效性影响的研究、低压环境下细水雾灭火有效性研究、不同特性细水雾灭火有效性研究,以及低压双流体细水雾持续灭火有效性研究.     

细水雾特性参数对锂离子电池组灭火效果的影响

为了研究不同特性参数细水雾抑制锂电池组火灾的效果,利用计算流体动力学模型和火灾动力学模拟程序对不同特性参数细水雾灭火效果进行了分析.采用锥形量热仪在50 kW/m2辐射热条件下和100％荷电状态下对锂离子电池进行燃烧试验,获取其热释放速率曲线,热释放速率峰值为9.23 kW.在试验获得参数的基础上以6个18650型锂电池建立火灾模型,利用火灾场模拟软件FDS对不同雾滴直径、雾动量和喷雾强度的细水雾的灭火过程进行数值模拟.定量分析熄灭锂离子电池火的细水雾相对适宜的条件范围,研究细水雾的特性参数对锂离子电池组灭火效果的影响.结果表明:在细水雾雾滴动能不变的情况下,随细水雾雾滴粒径增大,灭火时间先波动后增大,在细水雾粒径为50～100μm的工况下系统抑制锂离子电池火效果最佳,灭火时间最短,耗水量最少;水雾动量变化在一定区间内增加对锂电池灭火有增强效果,当雾滴速度足以穿越火焰时,增加水雾动量对灭火效果影响不大;在规定范围内喷雾强度越大,细水雾能够气化的数量越多,吸收的热量也越多,越有利于灭锂离子电池火灾.     

细水雾抑制熄灭木材火焰的小尺度实验研究及简化模型

细水雾灭火技术以其环保性好、灭火迅速、耗水量低、破坏性小以及适用面宽等特点 ,已成为国际火灾领域关注研究的热点。以此为工程背景 ,开展了细水雾抑制熄灭木材火焰的小尺度模拟实验研究。利用热电偶测温系统、数码摄像机等仪器测量了细水雾作用前后燃烧场的变化特征。结果表明 :预燃时间、喷雾气压、细水雾作用时间等参数对灭火过程有显著影响。细水雾抑制熄灭木材火焰的主要机理是燃料表面冷却效应。从传热的角度建立的木材表面冷却模型与实验结果吻合较好     

细水雾对油池火热释放速率影响规律的实验研究

热释放速率是描述火灾现象的重要参数,可以表征火灾发展的强烈程度。利用大尺寸的热释放速率实验测量平台开展细水雾对不同种类油池火灭火效率的实验研究,同时分析细水雾对燃烧产物一氧化碳含量的影响。结果表明,热释放速率曲线能直接反映出细水雾对火源的作用,细水雾作用下三种燃料的热释放速率均被有效抑制,且细水雾的流量越大,对油池火的灭火效果越好。燃烧产物一氧化碳在施加细水雾时出现陡增,表明细水雾隔绝氧气,造成不完全燃烧或者燃烧熄灭。     

障碍物遮挡条件下细水雾与油池火相互作用的实验研究

障碍物影响下细水雾灭火有效性的研究具有重要的意义。研究了障碍物与火焰的相对位置、细水雾工作压力、喷头距离火焰垂直距离及水平距离等因素对灭火有效性的影响,以及细水雾作用下火灾烟气中一氧化碳、二氧化碳及氧气浓度的变化规律等。结果表明:高压细水雾可以有效扑救部分有障碍物遮挡的油池火,同时喷头距离火焰的水平距离和垂直距离也显著影响着细水雾的灭火速度;高压细水雾在灭火过程中火场的氧气浓度明显升高,二氧化碳和一氧化碳浓度明显降低;细水雾工作压力较低时,一氧化碳浓度反而有所增加。     

细水雾抑制渔船早期火灾模拟实验研究

针对渔船火灾危险性进行分析,辨识火灾危险源,通过实验模拟横向对比几种灭火介质的灭火效果。实验中以柴油油盘火模拟渔船早期火灾,并根据发动机舱的特点设置了喷雾火模拟发动机舱火灾,并通过对比几种不同灭火剂的灭火效果得出细水雾灭火有效性能良好,具有应用于实践的可行性,在渔船灭火技术应用中前景广阔的结论。     

Performance evaluation of a water mist system in semiconductor wet bench fires

Wet benches are typically utilized in semiconductor facilities for wafer and parts cleaning. Heaters and some flammable liquids, such as acetone and isopropyl alcohol (IPA), are employed during the cleaning process. Wet bench fires have caused serious losses in the semiconductor industry. To assess the fire protection performance, several field tests were performed using a water mist system installed in the wet bench. In this study, acetone pan fuel was used as fire source. The test parameters were operational pressure, pan size, nozzle location, cylinder obstruction and degree of door closure. An appropriate design for operating pressure and the location of water mist nozzles extinguished wet bench fires effectively in the early fire stages. The nozzles are suggested to be fixed above or on the each side of the pan, ensuring that mist can completely cover a pan surface with sufficient momentum. With this suggested design, fires can be extinguished in the pan and do not spread over the wet bench.     

铁路隧道救援站火灾模拟实验平台设计及细水雾系统抑制车厢火灾的模拟实验研究

按照1：1尺度设计了实验平台,包括模拟隧道、模拟列车、排烟系统、火灾监控系统、火灾扑救系统以及火灾参数测量系统,是国内第一个专门对铁路隧道救援站的火灾安全性进行系统研究的全尺寸实验平台。实验平台可实现温度场、燃烧成分、火源热辐射等关键参数的测量;可研究不同工况条件下,火灾监控、火灾扑救技术和烟气控制技术的有效性,为发现火灾特征参数的演变规律和掌握有效的火灾控制技术提供了一整套解决方案,具有广阔的应用前景和重要的实际指导意义。本文建立并利用这样一个全尺寸实验平台进行了细水雾灭火系统抑制车厢火灾的模拟实验研究,获取温度、有毒有害气体浓度、热辐射等火场重要参数,发现细水雾灭火系统可有效的抑制车厢火灾,并验证了此实验平台用于铁路隧道内列车火灾实验研究的可行性和有效性。     

Experimental study on fire suppression performance of the high pressure water mist in the engine room of an offshore platform

The total flooding application water mist system is a new type of environmentally-friendly fixed extinguishing system. The optimizing design can improve its fire extinguishing performance. At present, the water mist fire extinguishing system in the engine room of the offshore deepwater semi-submersible support platform has not attracted sufficient attention. In this paper, the water mist in the engine room of a deepwater semi-submersible support platform was studied. It contains the effect of water mist on the heat absorption and oxygen insulation of diesel pool fires. The applicable parameters of the water mist fire extinguishing system were also determined. Moreover, based on the shielding of the fire source in the engine room and the different requirements for water mist extinguishing parameters, a hierarchical multi-parameter combined high-pressure water mist fire extinguishing system was proposed. In the full-scale experimental engine room model, according to the fire extinguishing experiments for diesel pool fires with different areas, this kind of hierarchical multi-parameter water mist system is very effective on shielded and non-shielded fires. In addition, it is still effective even in a non-closed environment coupled with smoke exhausting.     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.     

Full-scale experimental and numerical analysis of water mist system for sheltered fire sources in wind generator compartment

Through a series of full-scale fire experiments and numerical simulations, the effectiveness of water mist system on wind generator could be estimated, and compared with fire parameters, such as exposed or unexposed fire sources, number of nozzles, un-sheltered or sheltered fire sources, and fire source location.The experimental study found that the position of the water mist nozzles and whether the flames inside the oil pan are covered have a significant influence on overall extinguishing efficacy. The water mist system proved to have sound effectiveness on fire suppression in wind generators with sheltered fire source.According to FDS simulations of water mist systems, the simulated temperature curve declined more significantly than that for the actual measurements, indicating that the cooling effect of the simulated water mist was better. However, simulations were used for a situation where water mist was unable to directly extinguish the fire. Analysis of the simulated airflow showed that an opening caused the water to discharge outwards and the airflow was disturbed by the outside; thus, the extinguishing effect was poorer. There was less water with a sheltering object, and thus the extinguishing effect was poorer.     

细水雾灭火系统作用下特大断面公路隧道火灾特性数值模拟研究

细水雾灭火系统在公路隧道中的应用引发了较多关注,但是针对特大断面公路隧道的研究仍然不足。以2种大断面及4种特大断面公路隧道为研究对象,选取额定流量35 L/min、额定压力10 MPa的高压细水雾喷头,选择4种喷头布置形式,考虑火源功率、位置、遮挡物等影响因素,以隧道顶棚达到耐火极限的临界温度和相邻车辆被引燃的临界热辐射强度为判据,利用FDS模拟软件分析得到适用于隧道的细水雾喷头布置方案。结果表明对于特大断面隧道,细水雾单排顶喷布置不能有效抑制30 MW的大货车火灾,应采用增加顶喷或侧喷喷头的布置形式,从而保护隧道结构安全,防止相邻车辆被引燃。