Effects of Land Use Data on Dry Deposition in a Regional Photochemical Model for Eastern Texas

ABSTRACT

Land use data are among the inputs used to determine dry deposition velocities for photochemical grid models such as the Comprehensive Air Quality Model with extensions (CAMx) that is currently used for attainment demonstrations and air quality planning by the state of Texas. The sensitivity of dry deposition and O₃ mixing ratios to land use classification was investigated by comparing predictions based on default U.S. Geological Survey (USGS) land use data to predictions based on recently compiled land use data that were collected to improve biogenic emissions estimates. Dry deposition of O₃ decreased throughout much of eastern Texas, especially in urban areas, with the new land use data. Predicted 1-hr averaged O₃ mixing ratios with the new land use data were as much as 11 ppbv greater and 6 ppbv less than predictions based on USGS land use data during the late afternoon. In addition, the area with peak O₃ mixing ratios in excess of 100 ppbv increased significantly in urban areas when deposition velocities were calculated based on the new land use data. Finally, more detailed data on land use within urban areas resulted in peak changes in O₃ mixing ratios of ~2 ppbv. These results indicate the importance of establishing accurate, internally consistent land use data for photochemical modeling in urban areas in Texas. They also indicate the need for field validation of deposition rates in areas experiencing changing land use patterns, such as during urban reforestation programs or residential and commercial development.     

Sensitivity of urban ozone formation to chlorine emission estimates

Recent evidence has demonstrated that chlorine radical chemistry can enhance tropospheric volatile organic compound oxidation and has the potential to enhance ozone formation in urban areas. In order to investigate the regional impacts of chlorine chemistry in southeastern Texas, preliminary estimates of atmospheric releases of atomic chlorine precursors from industrial point sources, cooling towers, water and wastewater treatment, swimming pools, tap water, reactions of chlorides in sea salt aerosols, and reactions of chlorinated organics were developed. To assess the potential implications of these estimated emissions on urban ozone formation, a series of photochemical modeling studies was conducted to examine the spatial and temporal sensitivity of ozone and a unique marker species for chlorine chemistry, 1-Chloro-3-methyl-3-butene-2-one (CMBO), to molecular chlorine emissions estimates. Based on current estimates of molecular chlorine emissions in southeastern Texas, chlorine chemistry has the potential to enhance ozone mixing ratios by up to 11–16 ppbv. Impacts varied temporally, with emissions from cooling towers primarily responsible for a morning enhancement in ozone mixing ratios and emissions from residential swimming pools for an afternoon enhancement. Maximum enhancement in CMBO mixing ratios ranged from 59 to 69 pptv.     

Applications of satellite remote sensing data for estimating biogenic emissions in southeastern Texas

The sensitivity of biogenic emission estimates and air quality model predictions to the characterization of land use/land cover (LULC) in southeastern Texas was examined using the Global Biosphere Emissions and Interactions System (GloBEIS) and the Comprehensive Air Quality Model with extensions (CAMx). A LULC database was recently developed for the region based on source imagery collected by the Landsat 7 Enhanced Thematic Mapper-Plus sensor between 1999 and 2003, and field data for land cover classification, species identification and quantification of biomass densities.  Biogenic emissions estimated from the new LULC data set showed good general agreement in their spatial distribution, but were approximately 40% lower than emissions from the LULC data set currently used by the State of Texas, primarily because of differences in the biomass estimates of key species such as Quercus. Predicted ozone mixing ratios using the biogenic emissions produced from the new LULC data set were as much as 26 ppb lower in some areas on some days, depending on meteorological conditions. Satellite data and image classification techniques provide useful tools for mapping and monitoring changes in LULC. However, field validation is necessary to link species and biomass densities to the classification system used for accurate biogenic emissions estimates, especially in areas such as riparian corridors that contain dense spatial coverage of key species.     

Ozone dynamics and deposition processes at a deforested site in the Amazon basin

The goal of this study is to investigate the impact of deforestation on ozone dynamics and deposition in the Brazilian Amazon basin. This goal is accomplished through i) analyses of ozone levels and deposition rates at a deforested site during the rainy season; and ii) comparisons of these data with similar information derived at a forest. At the pasture site maximum ozone mixing ratios reach 20 parts per billion on a volume basis (ppbv) but about 6 ppbv prevail over the forest. Maximum ozone deposition velocities for pastures can reach 0.7 cm s-1, which is about threefold lower than values derived for forests. Combining ozone abundance and deposition velocities, pasture maximum ozone fluxes reach approximately 0.2 microgram (ozone) m-2 s-1. This flux represents approximately 70% of the deposition rates measured over the forest. Hence, this study suggests that conversion of rainforests to pastures could lead to a net reduction (30%) in the ozone sink in the Amazon.     

Effects of temperature and land use on predictions of biogenic emissions in Eastern Texas,USA

Accurate estimates of biogenic volatile organic compound emissions are critical for air quality planning in areas such as Eastern Texas where biogenic emissions comprise a significant fraction of the total volatile organic compound inventory. Uncertainties in biogenic volatile organic chemical emission estimates associated with different land use databases, surface temperature databases, and temperature interpolation methods were quantified and compared. The sensitivity of isoprene emissions to land use classification was investigated by comparing predictions based on land use data recently compiled for Eastern Texas to those based on the Biogenic Emissions Landcover Database version 3.1 (BELD3). Previous studies have only made these comparisons with the previous BELD version 2 database. Isoprene emission increased throughout much of Eastern Texas because areas classified as agricultural or savannah in BELD3 were more accurately classified as Post Oak, Live Oak, mesquite, and juniper in the new database. These results indicate the need for land use studies in areas poorly characterized in the BELD3. The sensitivity of isoprene emission estimates to uncertainties in surface temperatures were investigated by comparing predictions based on two different temperature databases and three different interpolation techniques. Spatial interpolations of surface temperatures collected at available Automated Surface Observing System (ASOS) stations in Houston, Austin, and Dallas were similar to the spatial interpolations of surface temperatures obtained from the ETA Data Assimilation System (EDAS). As a result, substantial variations in isoprene emissions were not observed over the majority of the modeling domain; however, differences of 4 F over localized regions produced a 35% difference in isoprene emissions. Comparisons between the isoprene emissions of the three interpolation methods sometimes revealed large variations, with maximum temperature differences of 4 F resulting in 60% differences in isoprene emissions in areas with the highest isoprene emissions. It was noted that the ASOS stations were clustered in urban areas and not in areas with the highest biogenic emissions. More ambient temperature monitors need to be located in rural locations to provide robust estimates of biogenic emissions and facilitate validation of interpolated temperature fields.     

A land use database and examples of biogenic isoprene emission estimates for the state of Texas, USA

Using data from a variety of sources, land use and vegetation in Texas were mapped with a spatial resolution of approximately 1 km. Over 600 classifications were used to characterize the land use and land cover throughout the state and field surveys were performed to assign leaf biomass densities, by species, to the land cover classifications. The total leaf biomass densities associated with these land use classifications ranged from 0 to 556 g/m², with the highest assigned total and oak leaf biomass densities located in central and eastern Texas. The land cover data were used as input to a biogenic emissions model, GLOBEIS2. Estimates of biogenic emissions of isoprene based on GLOBEIS2 and the new land cover data showed significant differences when compared to biogenic isoprene emissions estimated using previous land cover data and emission estimation procedures. For example, for one typical domain in eastern Texas, total daily isoprene emissions increased by 38% with the new modeling tools. These results may ultimately affect the way in which ozone and other photochemical pollutants are modeled and evaluated in the state of Texas.     

Measurement and analysis of atmospheric concentrations of isoprene and its reaction products in central Texas

A field experiment was conducted in August 1998 to investigate the concentrations of isoprene and isoprene reaction products in the surface and mixed layers of the atmosphere in Central Texas. Measured near ground-level concentrations of isoprene ranged from 0.3 (lower limit of detection – LLD) to 10.2 ppbv in rural regions and from 0.3 to 6.0 ppbv in the Austin urban area. Rural ambient formaldehyde levels ranged from 0.4 ppbv (LLD) to 20.0 ppbv for 160 rural samples collected, while the observed range was smaller at Austin (0.4–3.4 ppbv) for a smaller set of samples (37 urban samples collected). Methacrolein levels did not vary as widely, with rural measurements from 0.1 ppbv (LLD) to 3.7 ppbv and urban concentrations varying between 0.2 and 5.7 ppbv. Isoprene flux measurements, calculated using a simple box model and measured mixed-layer isoprene concentrations, were in reasonable agreement with emission estimates based on local ground cover data. Ozone formation attributable to biogenic hydrocarbon oxidation was also calculated. The calculations indicated that if the ozone formation occurred at low VOC/NO_x ratios, up to 20 ppbv of ozone formed could be attributable to biogenic photooxidation. In contrast, if the biogenic hydrocarbon reaction products were formed under low NO_x conditions, ozone production attributable to biogenics oxidation would be as low as 1 ppbv. This variability in ozone formation potentials implies that biogenic emissions in rural areas will not lead to peak ozone levels in the absence of transport of NO_x from urban centers or large rural NO_x sources.     

Carbonyls and non-methane hydrocarbons at a rural mountain site in northeastern United States

Measurements of carbonyls and C₂–C₆ non-methane hydrocarbons (NMHCs) were made in ambient air at a rural site at the summit of Whiteface Mountain (WFM) in New York State. Alkanes dominated in the samples, with ethane and propane making up about 55% of the total on a carbon-atom basis. Ethane, the longest-lived of the NMHCs, showed a mixing ratio in the range of 0.86–2.1 ppbv. Photochemical ageing analysis indicated an anthropogenic influence on the NMHC levels. The photochemical reactivity of the hydrocarbons, calculated in terms of propylene-equivalent concentration, was dominated by alkenes (propene and ethene), which accounted for 74% of the total NMHC sum. Air mass back-trajectories have been used to investigate the origin of the observed NMHCs and carbonyls. Higher concentrations were found when air masses arrived from the midwestern US corridor. Acetone was the most abundant species, comprising from 31% to 53% of the total detected carbonyls, followed by MEK (15–53%), HCHO (7–39%), and CH₃CHO (7–19%). Average concentrations were determined to be 1.61 ppbv for CH₃C(O)CH₃, 1.40 ppbv for MEK, 1.16 ppbv for HCHO, and 0.49 ppbv for CH₃CHO. The variations in carbonyl concentrations were observed to follow patterns similar to variations in O₃ concentrations, typical of secondary products. Correlations and statistical analysis of the carbonyls and NMHCs were performed, and showed that most of the compounds derived from mixing and photochemical transformation of long-range transported pollutants from the major source areas. Ranking of the carbonyls with respect to removal of the OH radical showed HCHO to be the most important species, followed by CH₃CHO, MEK, and CH₃C(O)CH₃.     

What is causing high ozone at Summit,Greenland?

Causes for the unusually high and seasonally anomalous ozone concentrations at Summit, Greenland were investigated. Surface data from continuous monitoring, ozone sonde data, tethered balloon vertical profiling data, correlation of ozone with the radionuclide tracers ⁷Be and ²¹⁰Pb, and synoptic transport analysis were used to identify processes that contribute to sources and sinks of ozone at Summit. Northern Hemisphere (NH) lower free troposphere ozone mixing ratios in the polar regions are ∼20 ppbv higher than in Antarctica. Ozone at Summit, which is at 3212 m above sea level, reflects its altitude location in the lower free troposphere. Transport events that bring high ozone and dry air, likely from lower stratospheric/higher tropospheric origin, were observed ∼40% of time during June 2000. Comparison of ozone enhancements with radionuclide tracer records shows a year-round correlation of ozone with the stratospheric tracer ⁷Be. Summit lacks the episodic, sunrise ozone depletion events, which were found to reduce the annual, median ozone at NH coastal sites by up to ∼3 ppbv. Synoptic trajectory analyses indicated that, under selected conditions, Summit encounters polluted continental air with increased ozone from central and western Europe. Low ozone surface deposition fluxes over long distances upwind of Summit reduce ozone deposition losses in comparison to other NH sites, particularly during the summer months. Surface-layer photochemical ozone production does not appear to have a noticeable influence on Summit's ozone levels.     

Effects of geographical location and land use on atmospheric deposition of nitrogen in the State of Connecticut

A network of eight monitoring stations was established to study the atmospheric nitrogen concentration and deposition in the State of Connecticut. The stations were classified into urban, rural, coastal and inland categories to represent the geographical location and land use characteristics surrounding the monitoring sites. Nitrogen species including nitrate, ammonium, nitric acid vapor and organic nitrogen in the air and precipitation were collected, analyzed and used to infer nitrogen concentrations and dry and wet deposition flux densities for the sampling period from 1997 through 1999, with independently collected meteorological data. Statistical analyses were conducted to evaluate the spatial variations of atmospheric concentration and deposition fluxes of total nitrogen in Connecticut. A slightly higher atmospheric concentration of total nitrogen was observed along the Connecticut coastline of Long Island Sound compared to inland areas, while the differences of nitrogen deposition fluxes were insignificant between coastal and inland sites. The land use characteristics surrounding the monitoring sites had profound effects on the atmospheric nitrogen concentration and dry deposition flux. The ambient nitrogen concentration over the four urban sites was averaged 38.9% higher than that over the rural sites, resulting a 58.0% higher dry deposition flux in these sites compared to their rural counterparts. The local industrial activities and traffic emissions of nitrogen at urban areas had significant effects on the spatial distribution of atmospheric nitrogen concentration and dry deposition flux in the State. Wet and total deposition fluxes appeared to be invariant between the monitoring sites, except for high flux densities measured at Old Greenwich, a monitoring station near to and downwind of the New York and New Jersey industrial complexes.     

Determination of PM₁₀ deposition based on antimony flux to selected urban surfaces

Deposition of PM(10) particles to several types of urban surfaces was investigated within this study. Antimony was chosen as a tracer element to calculate dry deposition velocities for PM(10), since antimony proved to be present almost exclusively in PM(10) particles in ambient urban air. During 18 months, eight sampling sites in Berlin and Karlsruhe, two cities in Germany, were operated. PM(10) concentrations and dry deposition were routinely sampled as two week averages. Additionally, leaf-samples were collected at three sites with tall vegetation. The obtained deposition velocities ranged from 0.8 to 1.3 cms(-1) at roadside sites and from 0.4 to 0.5 cms(-1) at the other sites. With reference to the whole canopy, additional deposition velocities of about 0.5 cms(-1) were obtained for leaf surfaces. As a consequence, it can be concluded that vegetation-covered areas beside streets show the highest potential to capture particles in urban areas.     

Estimate of initial isoprene contribution to ozone formation potential in Beijing, China

Volatile organic compounds (VOCs) are important precursors of tropospheric ozone formation. Isoprene contributions to ozone formation by using ambient mixing ratios are generally underestimated because of rapid chemical losses. In this study, ambient mixing ratios of major VOC species were continuously measured at Peking university (PKU) and YUFA, urban and sub-urban sites in Beijing, the city that will host 2008 Olympic Games. The observed mixing ratios of methyl vinyl ketone (MVK), methacrolein (MACR) and isoprene were used to derive the mixing ratios of initial isoprene, which means the ambient isoprene level before it undergoes any photochemical reaction with OH radicals. The average mixing ratios of initial isoprene were 3.3±1.6 and 2.9±1.5 ppbv at PKU and YUFA sites, respectively. The percentages of initial isoprene in total initial VOCs were 10.8% at PKU site and 11.4% at YUFA site, in reasonable agreement with the isoprene contribution in total VOC emissions as derived from source inventories. Maximum increment reactivity (MIR) was used to evaluate the ozone formation potential (OFP) for major VOC species. The OFP for initial isoprene accounted for 23% of the total OFPs for all measured species, compared to 11% using ambient mixing ratios of isoprene at PKU site. Similarly, at YUFA site, the ambient measured isoprene and initial isoprene contributed 10% and 22%, respectively, to the OFPs for total measured VOCs. It seems that isoprene has similar contribution to ozone formation at both sites in Beijing city.     

Volatile organic compounds in some urban locations in United States

Volatile organic compounds (VOCs) have been determined to be human risk factors in urban environments, as well as primary contributors to the formation of photochemical oxidants. Ambient air quality measurements of 54 VOCs including hydrocarbons, halogenated hydrocarbons and carbonyls were conducted in or near 13 urban locations in the United States during September 1996 to August 1997. Air samples were collected and analyzed in accordance with US Environmental Protection Agency-approved methods. The target compounds most commonly found were benzene, toluene, xylene and ethylbenzene. These aromatic compounds were highly correlated and proportionally related in a manner suggesting that the primary contributors were mobile sources in all the urban locations studied. Concentrations of total hydrocarbons ranged between 1.39 and 11.93 parts per billion, by volume (ppbv). Ambient air levels of halogenated hydrocarbons appeared to exhibit unique spatial variations, and no single factor seemed to explain trends for this group of compounds. The highest halogenated hydrocarbon concentrations ranged from 0.24 ppbv for methylene chloride to 1.22 ppbv for chloromethane. At participating urban locations for the year of data considered, levels of carbonyls were higher than the level of the other organic compound groups, suggesting that emissions from motor vehicles and photochemical reactions strongly influence ambient air concentrations of carbonyls. Of the most prevalent carbonyls, formaldehyde and acetaldehyde were the dominant compounds, ranging from 1.5-7.4 ppbv for formaldehyde, to 0.8-2.7 ppbv for acetaldehyde.     

The scavenging of atmospheric sulfate by arctic snow

Scavenging ratios for sulfate on the south-central Greenland Ice Sheet at Dye 3 have been computed for 1982–1984. The ratios are based on measured concentrations in snow and estimated concentrations in air. The snow data have been obtained from snowpit samples which were dated by comparing δ¹⁸O values with meteorological records. The airborne concentrations have been estimated from data collected at coastal Greenland sites. Scavenging ratios resulting from this process are found to be in the range ~ 100–200 in winter and ~ 200–400 in summer. The greater summer values are attributed to increased riming, resulting in scavenging of sulfate as condensation nuclei and possible oxidation of SO₂ in cloudwater droplets. Using the airborne and snowpit concentrations with assumed dry deposition velocities of 0.02–0.05 cms⁻, it is estimated that dry deposition is responsible for roughly 10–30% of the total sulfate deposition on a year-round basis at Dye 3. During portions of the Arctic winter, however, when the snow is unrimed and when there is less precipitation, dry deposition may be dominant.     

The humidity dependence of ozone deposition onto a variety of building surfaces

Measurements of the dry deposition velocity of O₃ to material samples of calcareous stone, concrete and wood at varying humidity of the air, were performed in a deposition chamber. Equilibrium surface deposition velocities were found for various humidity values by fitting a model to the time-dependent deposition data. A deposition velocity-humidity model was derived giving three separate rate constants for the surface deposition velocities, i.e. on the dry surface, on the first mono-layer of adsorbed water and on additional surface water. The variation in the dry air equilibrium surface deposition velocities among the samples correlated with variations in effective areas, with larger effective areas giving higher measured deposition velocities. A minimum for the equilibrium surface deposition velocity was generally measured at an intermediate humidity close to the humidity found to correspond to one mono-layer of water molecules on the surfaces. At low air humidity the equilibrium surface deposition velocity of O₃ was found to decrease as more adsorbed water prevented direct contact of the O₃ molecules with the surface. This was partly compensated by an increase as more adsorbed water became available for reaction with O₃. At high air humidity the equilibrium surface deposition velocity was found to increase as the mass of water on the surface increased. The deposition velocity on bulk de-ionised water at RH=90% was an order of magnitude lower than on the sample surfaces.     

Concentration, size distribution, and dry deposition rate of particle-associated metals in the Los Angeles region

Daily averaged atmospheric concentrations and dry deposition fluxes of particulate metals were measured seasonally at six urban sites and one non-urban coastal site in the Los Angeles region using a conventional total suspended particulate matter (TSP) filter, surrogate surface deposition plates, and a Noll Rotary Impactor (NRI), which provides information about particle size distribution in four size ranges above 6 μm. With the exception of the non-urban site, particulate metal concentrations and deposition fluxes were remarkably uniform spatially and temporally. At all sites there were significant metal concentrations on particles greater than 10 μm, a commonly used upper limit for many air quality monitoring studies, and these large particles were estimated to be responsible for most of the deposited mass of metals. Annual averaged values of deposition rates measured with a surrogate surface were in good agreement with values estimated using theoretical deposition velocities in conjunction with measured size-segregated particle concentrations. Image analysis of particles deposited on NRI stage A, which collects all particles greater than 6 μm, indicated nighttime metal concentrations and deposition at the non-urban coastal site was higher than in the day time due to offshore advection of urban air associated with the diurnal land breeze. Measured enrichments of crustal elements and metals were correlated, indicating efficient mixing of natural and anthropogenic material from different sources, hypothesized to be the result of cyclical resuspension and deposition of dust by moving vehicles and wind.     

Dry deposition fluxes and deposition velocities of PAHs at an urban site in Turkey

Even though dry deposition and air–water exchange of semivolatile organic compounds (SOCs) are important for surfaces in and around the urban areas, there is still no generally accepted direct measurement technique for dry deposition. In this study, a modified water surface sampler (WSS) configuration, including a filter holder and an XAD-2 resin column, was employed to investigate the polycyclic aromatic hydrocarbon (PAH) dry deposition in an urban area. The measured total (particle+dissolved) PAH fluxes to the WSS averaged to be 34 960±16 540 ng m⁻² d⁻¹. Average particulate PAH flux, determined by analyzing the filter in the WSS, was about 8% of the total PAH flux. Temporal flux variations indicated that colder months (October–April) had the highest PAH fluxes. This increase could be attributed to the residential heating as well as meteorological effects including lower mixing height. A high volume air sampler was concurrently employed to collect ambient air concentrations. The average total (gas+particle) atmospheric PAH concentration (456±524 ng m⁻³) was within the range of previously measured values at different urban locations. PAH concentrations in urban areas are more than two orders of magnitude higher than those measured in pristine areas and this result may indicate that urban areas have major source sectors and greater deposition rates are expected near to these areas. The average contribution of particle phase was about 10% in total concentration. Simultaneous particulate phase dry deposition and ambient air samples were collected in this study. Then, particulate phase apparent dry deposition velocities were calculated using the fluxes and concentrations for each PAH compound and they ranged from 0.1 to 1.2 cm s⁻¹. These values are in good agreement with previously reported values.     

In situ measurements of NO,NO2, NOy,and O3 in Dinghushan (112°E, 23°N), China during autumn 2008

Measurements of O₃, NO, NO₂, and NO_y mixing ratios were carried out at a station-Dinghushan in Guangdong province of China from Oct. 18th, 2008 to Nov. 7th, 2008. This research shows that under conditions of a strong subtropical high (temperature high, relative humidity low), on Oct. 29th, 2008 the Dinghushan station observed severe photochemical pollution. The Maximum hour average concentration of O₃ reached 128 ppbv, and the serious photochemical pollution is caused by superposition of local photochemical reaction and regional transport. The observation that NO_x ozone production efficiency (OPE) values for high O₃ pollution on Oct. 29–30th, 2008 were 10.5 and 15, which were more than the values of the city source region and lower than that of the surrounding clean areas. It means the sensitivity of O₃ generated was transitioning from VOCs limited condition to NOx-limited regime. By applying a Smog Production Model, the results show that the extent of reaction values less than 0.6 were occurred on 17 days during campaign, and 13 days for the extents of reactions more than 0.6. However, there were no data with values over 0.8, which indicates that the observation station represent a VOCs sensitive system during campaign. Analysis of the extents of reactions and wind data show that the pollution is mostly subject to a southeasterly airflow influence.     

Characteristic behavior of peroxyacetyl nitrate (PAN) in Seoul megacity, Korea

We measured the concentrations of peroxyacetyl nitrate (PAN) and other photochemically reactive species, including O(3), NO(2), and non-methane hydrocarbons (NMHCs), in the Seoul Metropolitan area (SMA) during May through June in 2004 and 2005. PAN was determined using a fast chromatograph with luminol-based chemiluminescence detection. Mixing ratios of PAN ranged from below the detection limit (0.1ppbv) to 10.4ppbv with an average of 0.8ppbv. O(3) concentrations ranged from 0 to 141ppbv. The average PAN/O(3) ratio of 0.07 was higher than that observed in cities of Europe and North America (0.02) where control strategies have been enforced to reduce hydrocarbon emissions through extensively reformulated gasoline programs. Strong positive correlations between daily PAN and O(3) maxima during the day demonstrate that similar photochemical factors controlled the production of these two chemicals. However, relationships between PAN and its precursors, NO(2) and NMHCs, suggest that PAN production was more sensitive to NO(2) than NMHCs levels whereas O(3) production was limited by the overall availability of NMHCs. It is likely that the compositions of NMHCs in SMA were favorable for PAN production because of the low fractions of oxygenated compounds in automobile fuels. PAN maxima were observed around noon, which was 2-3h earlier than the much broader O(3) maxima that occurred in the midafternoon. After reaching the maximum, PAN concentrations rapidly dropped within a few hours, which could be largely due to thermal destruction and to limited production under the typically low NO(2) levels that occurred in the early afternoon. The heterogeneous destruction of particulate matter could be an additional sink for PAN in SMA.     

Interfacial transfer velocities of ozone dry deposition over agricultural soils: experimental and theoretical analysis

A mathematical dry deposition model was developed and an experiment performed to verify that the interfacial transfer velocity (V(S)) of ozone dry deposition includes the interfacial reactive velocity (V(Sr)) and interfacial kinetic velocity (V(Sk)), as determined by measuring the ozone depletion over agricultural field soils in a dry deposition chamber. Experimental results indicate that the chemical reaction (O3 + NO --> NO2 + O2) produces the reactive velocity. Observed interfacial transfer velocities depend on nitrogen oxide emission (NO) and soil temperature (T(S)). Additionally, observed kinetic velocities of conditioned field soils increased linearly with soil temperature. Moreover, observed reactive velocities of field soils increased exponentially with soil temperature, and depend on the emission rate of nitrogen oxide. Results in this study demonstrate that interfacial transfer velocities are variable velocities for long-term transportation, that influenced factors are chemical kinetics, thermodynamics and biochemical mechanisms.