Public opinion and siting solid waste landfills in Kuwait

Siting municipal solid waste landfills in Kuwait had not considered public concerns about the location of such facilities. Kuwait Municipality has disposed urban waste in abandoned sand quarries for the past 20 years in an unplanned fashion. Due to this improper siting criteria, environmental and health problems have risen from old landfills that are located in residential areas. In an effort to help responsible decision-makers in assessing public support for siting landfills a structured, yet simple, questionnaire was designed and distributed to a random sample of heads of households. Statistical techniques were employed to examine trends and relationships between the sample public responses concerning landfill siting criteria. The findings of the research indicated that a significant percentage of the responding sample did not know about the various landfill impacts and less than 50% were aware of the negative impacts of landfills on the public health and the environment. The visual appearance of the landfill scored the lowest impact in the opinion of the sample public while the most important aspect in siting a landfill appeared to be its economic consideration. The research findings also directed attention to the important role that the media could play in increasing public awareness. Results from the cross-classification analysis demonstrated the existence of differences in awareness levels according to age, nationality, martial status, education, and occupation of the responding sample. Statistically, these differences were significant at the 95% significance level, as supported by the test of the χ-square.     

Management of old landfills by utilizing forest and energy industry waste flows

The lack of landfill capacity, forthcoming EU waste disposal and landfill management legislation and the use of non-renewable and energy intensive natural resources for the end-treatment of old landfills increase pressures to develop new landfill management methods. This paper considers a method for the end-management of old landfills in Finland, which is based on the utilization of forest and paper industry waste flows, wastes from paper recycling (de-inking) and wastes from forest industry energy production. Fibre clay wastes from paper mills, de-inking sludges from de-inking of recovered waste paper and incineration ash from forest industry power plants serve to substitute the use of natural clay for the building of landfill structures for closed landfills. Arguably, this method is preferable to existing practices of natural clay use for landfill building, because it (1) substitutes non-renewable natural clay, (2) consumes less energy and generates less CO2 emissions than the use of natural clay, and (3) eliminates considerable amounts of wastes from paper production, paper consumption and from forest industry energy production. Some difficulties in the application of the method are considered and the waste flow utilization is incorporated into a local forest industry recycling network.     

Combining GIS with fuzzy multicriteria decision-making for landfill siting in a fast-growing urban region

Landfill siting is a difficult, complex, tedious, and protracted process requiring evaluation of many different criteria. This paper presents a fuzzy multicriteria decision analysis alongside with a geospatial analysis for the selection of landfill sites. It employs a two-stage analysis synergistically to form a spatial decision support system (SDSS) for waste management in a fast-growing urban region, south Texas. The first-stage analysis makes use of the thematic maps in Geographical information system (GIS) in conjunction with environmental, biophysical, ecological, and socioeconomic variables leading to support the second-stage analysis using the fuzzy multicriteria decision-making (FMCDM) as a tool. It differs from the conventional methods of integrating GIS with MCDM for landfill selection because the approach follows two sequential steps rather than a full-integrated scheme. The case study was made for the city of Harlingen in south Texas, which is rapidly evolving into a large urban area due to its vantage position near the US-Mexico borderlands. The purpose of GIS was to perform an initial screening process to eliminate unsuitable land followed by utilization of FMCDM method to identify the most suitable site using the information provided by the regional experts with reference to five chosen criteria. Research findings show that the proposed SDSS may aid in recognizing the pros and cons of potential areas for the localization of landfill sites in any study region. Based on initial GIS screening and final FMCDM assessment, "site 1" was selected as the most suitable site for the new landfill in the suburban area of the City of Harlingen. Sensitivity analysis was performed using Monte Carlo simulation where the decision weights associated with all criteria were varied to investigate their relative impacts on the rank ordering of the potential sites in the second stage. Despite variations of the decision weights within a range of 20%, it shows that "site 1" remains its comparative advantage in the final site selection process.     

Host community attitudes towards solid waste landfill infrastructure: comprehension before compensation

One of the most controversial planning issues internationally is the siting of waste disposal infrastructure in local communities. Compensation is viewed as a possible solution to siting difficulties in many countries. However, existing empirical evidence is conflicting as to whether or not compensation-based siting has reduced opposition to such developments. Thus, before compensation policy can be considered as the solution for recognising social costs and introducing equity into the waste planning system, it is important to understand why people reject waste disposal infrastructure developments and if this rejection continues over the lifetime of facility operations. This paper utilises information gathered through surveys to examine the effects of distance, local authority consultation efforts, experience and other factors, on attitudes towards non-hazardous solid waste landfill developments in two examples of a potential and actual host communities. Our findings suggest distance proxies expectations of environmental risk in communities with no experience of living with landfill infrastructure. Community consultations by authorities are consistently important, even after a landfill has been in operation for a number of years. This suggests to policy makers to consult thoroughly and adequately before pursuing compensation policies.     

Landfill space consumption dynamics in the Lower Rio Grande Valley by grey integer programming-based games

The Lower Rio Grande Valley (LRGV) region in South Texas emerges as a warehouse and transportation center between Central America and the US with positive growth impacts due to the North American Free Trade Agreement (NAFTA). In 10 years time, a 39.8% population increase has resulted in a 25% boost in solid waste per capita disposal rate in the region. A landfill space shortage drives a need for landfill operators to understand their optimal management strategies in this highly-competitive market. Initially, a strategic plan for optimal solid waste pattern distribution minimizes net costs for cities. This is accomplished through a grey integer programming algorithm that encapsulates all uncertainty present in the solid waste system. Secondly, a series of grey integer submodels construct payoff matrices for a zero-sum two-person game. The ensuing game theoretic analysis is critical for evaluating optimal pricing strategies for tipping fees available to the most significant regional landfills (e.g. Browning-Ferris Industries (BFI) and City of Edinburg) as they compete over disposal contracts. The BFI landfill intrinsically benefits from its competitive pricing policy and central location to solid waste generators. The City of Edinburg landfill, on the other hand, wishes to secure its lucrative solid waste management revenue. It desires a gaming strategy backed by optimality that integrates ambiguity in solid waste generation, design capacity boundaries, and unitary shipping costs. Results show that a two-tiered analysis via grey integer programming-based games may pave the way for 'grey Nash equilibria' pricing tactics that will help the Edinburg landfill maintain its waste contracts.     

Potential for enhanced phytoremediation of landfills using biosolids – a review

Despite the use of recyclable materials increasing worldwide, waste disposal to landfill remains the most common method of waste management because it is simple and relatively inexpensive. Although landfill disposal is an effective waste management system, if not managed correctly, a number of potential detrimental environmental impacts have been identified including soil and ground water contamination, leachate generation, and gas emissions. In particular, improper post-closure treatment of landfills or deterioration of the conventional clay landfill capping were shown to result in land degradation which required remediation to secure contaminants within the landfill site.Phytoremediation is an attractive technology for landfill remediation, as it can stabilize soil and simultaneously remediate landfill leachate. In addition, landfill phytoremediation systems can potentially be combined with landfill covers (Phytocapping) for hydrological control of infiltrated rainfall. However, for the successful application of any phytoremediation system, the effective establishment of appropriate, desired vegetation is critical. This is because the typically harsh and sterile nature of landfill capping soil limits the sustainable establishment of vegetation. Therefore, the physicochemical properties of landfill capping soils often need to be improved by incorporating soil amendments. Biosolids are a common soil amendment and will often meet these demanding conditions because they contain a variety of plant nutrients such as nitrogen, phosphate, potassium, as well as a large proportion of organic matter. Such amendment will also ameliorate the physical properties of the capping soils by increasing porosity, moisture content, and soil aggregation. Contaminants which potentially originate from biosolids will also be remediated by activities congruent with the establishment of plants and bacteria.     

A comparative analysis of the psychosocial impacts of waste disposal facilities

This paper reports the results of a comparative analysis of the psychosocial impacts of municipal solid waste disposal facilities (both landfills and incinerators) in six communities in the provinces of Ontario and British Columbia, Canada. Telephone surveys were administered to random samples of residents living around each facility between 1990 and 1995 (total n=1203). The results of logistic regression analyses show that type of facility was the strongest predictor of residents' awareness, concern, and actions taken in response to site concerns. Essentially, residents living in close proximity to a landfill had a higher probability of reporting awareness, concern or actions than residents living around an incinerator site. There was little evidence of differences in reactions between Ontario and British Columbia (BC) residents, despite variations in provincial policies on waste disposal. The effects of other predictors, with the exception of involvement in the local community, were not consistent, supporting previous findings that the determinants of facility impacts are outcome‐specific. It is essential that environmental managers take this constellation of factors into account in the operation of existing, or siting of new, facilities.     

Ramifications of solid waste disposal site relocation in urban areas of developing countries: a case study in Tanzania

Sanitary landfilling is considered to be the most appropriate means of final disposal of solid wastes. Currently in Tanzania, the cheapest method of developing a landfill is by making use of natural depressions or former borrow pits and mine pits. This paper examines the impacts associated with the relocation of a waste disposal site from a crude disposal site at Vingunguti to a new landfill site at New MECCO quarry in Kunduchi area, both in Dar es Salaam, Tanzania. The paper focuses on the fate of scavenging and solid waste recycling which are currently taking place at Vingunguti site and mining as well as food vending activities at the proposed new landfill site. Scavenging and waste recycling were found to be important sources of income for some individuals in the city. Various items collected for recycling were found to be an important source of raw materials for some industries in Dar es Salaam. A total of 94% of all the miners were entirely dependent on stone mining and crushing as a sole means of income generation, and 68% of the miners had practised this activity for between 1 and 9 years. Finally the paper recommends that, selection of a waste disposal site should favour abandoned mines or borrow pits rather than operational ones. It also recommends that, waste recycling and scavenging be accommodated in other stages of the waste stream since they can not be practised at a sanitary landfill.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: A case for England

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.     

Potential Tree Species for Use in the Restoration of Unsanitary Landfills

Given that they represent the most economical option for disposing of refuse, waste landfills are widespread in urban areas. However, landfills generate air and water pollution and require restoration for landscape development. A number of unsanitary waste landfills have caused severe environmental problems in developing countries. This study aimed to investigate the colonization status of different tree species on waste landfills to assess their potential for restoring unsanitary landfills in South Korea. Plot surveys were conducted using 10 × 10-m quadrats at seven waste landfill sites: Bunsuri, Dugiri, Hasanundong, Gomaeri, Kyongseodong, Mojeonri, and Shindaedong. We determined the height, diameter at breast height (DBH), and number of tree species in the plots, and enumerated all saplings ≤1 m high. Because black locust, Robinia pseudoacacia, was the dominant tree species in the waste landfills, we measured the distance from the presumed mother plant (i.e., the tallest black locust in a patch), height, and DBH of all individuals in black locust patches to determine patch structure. Robinia pseudoacacia, Salix koreensis, and Populus sieboldii formed canopy layers in the waste landfills. The basal area of black locust was 1.51 m²/ha, and this species had the highest number of saplings among all tree species. The diameter of the black locust patches ranged from 3.71 to 11.29 m. As the patch diameter increased, the number of regenerated saplings also tended to increase, albeit not significantly. Black locust invaded via bud banks and spread clonally in a concentric pattern across the landfills. This species grew well in the dry habitat of the landfills, and its growth rate was very high. Furthermore, black locust has the ability to fix nitrogen symbiotically; it is therefore considered a well-adapted species for waste landfills. Eleven woody species were selected for screening: Acer palmatum, Albizzia julibrissin, Buxus microphylla var. koreana, Ginkgo biloba, Hibiscus syriacus, Koelreuteria paniculata, Ligustrum obtusifolium, Liriodendron tulipifera, Pinus koraiensis, Pinus thunbergii, and Sophora japonica. As a result of a comparison of the total ratio (sum of shoot extension and diameter growth at the landfill relative to a reference site) and mortality, six species (Liriodendron tulipifera, Albizzia julibrissin, Ligustrum obtusifolium, Buxus microphylla var. koreana, Hibiscus syriacus, and Sophora japonica), which had a total ratio >1 and experienced low mortality, are recommended as potentially suitable species for waste landfill remediation. We suggest that mixed plantations of ubiquitous adaptable species and naturally occurring black locust will enhance the landscape through synergistic effects.     

Siting and Routing Assessment for Solid Waste Management Under Uncertainty Using the Grey Mini-Max Regret Criterion

Solid waste management (SWM) is at the forefront of environmental concerns in the Lower Rio Grande Valley (LRGV), South Texas. The complexity in SWM drives area decision makers to look for innovative and forward-looking solutions to address various waste management options. In decision analysis, it is not uncommon for decision makers to go by an option that may minimize the maximum regret when some determinant factors are vague, ambiguous, or unclear. This article presents an innovative optimization model using the grey mini-max regret (GMMR) integer programming algorithm to outline an optimal regional coordination of solid waste routing and possible landfill/incinerator construction under an uncertain environment. The LRGV is an ideal location to apply the GMMR model for SWM planning because of its constant urban expansion, dwindling landfill space, and insufficient data availability signifying the planning uncertainty combined with vagueness in decision-making. The results give local decision makers hedged sets of options that consider various forms of systematic and event-based uncertainty. By extending the dimension of decision-making, this may lead to identifying a variety of beneficial solutions with efficient waste routing and facility siting for the time frame of 2005 through 2010 in LRGV. The results show the ability of the GMMR model to open insightful scenario planning that can handle situational and data-driven uncertainty in a way that was previously unavailable. Research findings also indicate that the large capital investment of incineration facilities makes such an option less competitive among municipal options for landfills. It is evident that the investment from a municipal standpoint is out of the question, but possible public–private partnerships may alleviate this obstacle.     

Multi-criteria evaluation technique for SFI site identification of NORMS and oil industry waste disposal – Possibilities in Kuwait

Waste generation and accumulating quantities of oil field waste are a matter of environmental concern. This study proposes the Slurry Fracture Injection (SFI) technique as an alternative waste disposal method. The slurried solids injection waste disposal method is environmentally secure and permanent, leaving no future liabilities that must be risk-evaluated or priced. An entire waste stream comprising ground solids and waste water can be injected into deep and hydraulically secure target strata with no contamination of potable water-bearing formations or formations outside the target zone that may contain resources (gas and oil). The slurry injection method can be used to clean and reclaim landfills, oil pits and granular waste dumps. This article proposes a two-tier screening method for evaluating the feasibility of this technique and the identification of suitable target zones. A stringent environmental and process control monitoring program should complement the planning and operational period to ensure environmental protection, waste containment, and regulatory HSE compliance.     

GIS and the Analytic Hierarchy Process for Regional Landfill Site Selection in Transitional Countries: A Case Study From Serbia

The Serbian National Waste Management Strategy for the Period 2010–2019, harmonized with the European Union Directives, mandates new and very strict requirements for landfill sites. To enable analysis of a number of required qualitative and quantitative factors for landfill site selection, the traditional method of site selection must be replaced with a new approach. The combination of GIS and the Analytic Hierarchy Process (AHP) was selected to solve this complex problem. The Srem region in northern Serbia, being one of the most environmentally sensitive areas, was chosen as a case study. Seventeen factors selected as criteria/sub-criteria were recognized as most important, divided into geo-natural, environmental, social and techno-economic factors, and were evaluated by experts from different fields using an AHP extension in Arc GIS. Weighted spatial layers were combined into a landfill suitability map which was then overlapped with four restriction maps, resulting in a final suitability map. According to the results, 82.65% of the territory of Srem is unsuitable for regional landfill siting. The most suitable areas cover 9.14%, suitable areas 5.24%, while areas with low and very low suitability cover 2.21 and 0.76% of the territory, respectively. Based on these findings, five sites close to two large urban agglomerations were suggested as possible locations for a regional landfill site in Srem. However, the final decision will require further field investigation, a public acceptance survey, and consideration of ownership status and price of the land.     

Reverse logistics in Malaysia: Investigating the effect of green product design and resource commitment

Reverse logistics and green product design are green supply chain management practices that are being implemented to demonstrate firm's commitment to environmental sustainability. The generation of waste from electrical and electronic equipments prompts the viability of product recovery to salvage invested material and energy. Selection of various reverse logistics product disposition options relies on products’ residual value and the accessibility of reusable content for re-entry in forward supply chain. This study explores the effect of green product design and resource commitment on reverse logistics product disposition by employing empirical analysis on 89 returned mail survey received from ISO14001 certified electrical and electronic manufacturing firms in Malaysia. The results indicated that design for disassembly is necessary to harvest valuable inventories from every product disposition options except of disposal whereas design for environment and commitment of resources have slight influence on repair and disposal activities. As the evidences show that green product design and reverse logistics product disposition are interrelated, firms ought to undertake environmentally proactive approaches to generate benefits from resources that are undeservingly discarded as landfill waste.     

Resource management as a key factor for sustainable urban planning

Due to fast urbanization and increasing living standards, the environmental sustainability of our global society becomes more and more questionable. In this historical review we investigate the role of resources management (RM) and urban planning (UP) and propose ways for integration in sustainable development (SD). RM follows the principle of circular causation, and we reflect on to what extent RM has been an element for urban planning. Since the existence of the first settlements, a close relationship between RM, urbanization and technological development has been present. RM followed the demand for urban resources like water, energy, and food. In history, RM has been fostered by innovation and technology developments and has driven population growth and urbanization. Recent massive resource demand, especially in relation to energy and material flows, has altered natural ecosystems and has resulted in environmental degradation. UP has developed separately in response to different questions. UP followed the demand for improved living conditions, often associated to safety, good manufacturing and trading conditions and appropriate sanitation and waste management. In history UP has been a developing research area, especially since the industrial era and the related strong urbanization at the end of the 18th century. UP responded to new emerging problems in urban areas and became increasingly complex. Nowadays, UP has to address many objectives that are often conflicting, including, the urban sustainability. Our current urban un-sustainability is rooted in massive resource consumption and waste production beyond natural limits, and the absence of flows from waste to resources. Therefore, sustainable urban development requires integration of RM into UP. We propose new ways to this integration.     

Municipal solid waste management in South Africa: from waste to energy recovery through waste-to-energy technologies in Johannesburg

ABSTRACT

“Waste-to-energy” (WTE) technologies have been presented as one of the avenues to improve the management of solid waste whilst promoting clean and healthy urban environments through the recovery of waste and generation of energy. Research suggests that with the right investment in technologies and institutional changes, waste can potentially become a resource that can contribute to the socio-economic development of cities. It is in this context that this paper presents a review of the literature on WTE technologies and their implications on sustainable waste management in urban areas. The paper particularly contributes to our understanding of WTE technologies and its potential on Municipal Solid Waste Management (MSWM) in Johannesburg, South Africa. It is estimated that the city of Johannesburg’s landfills airspace will be completely depleted by year 2023. This projection becomes a motivation for the identification of suitable WTE alternative avenues to manage waste in the city. The paper argues that WTE technologies can contribute significantly to sustainable waste management, economic growth, ecological and environmental well-being.     

填埋场场地复用技术与展望

城市垃圾卫生填埋场场地复用技术是一种能增大填埋场填埋能力，避免过高的填埋场地费用的新方法。该技术在德国和美国的实践都已取得了成功。为使该技术能在我国得到推广和应用，文中介绍了该技术的实施条件，列举了部分应用实例，分析了该技术的优势及潜在问题，最后对其在我国的应用前景进行了展望。     

Screening for organotin compounds in European landfill leachates

As industrial chemicals, organotin compounds are predominantly applied as polyvinyl chloride (PVC) stabilizers and biocides. They are widely encountered in environmental samples and may be introduced into landfills by disposal of municipal solid waste or sewage sludge. In the present study, leachate samples were obtained from several sanitary landfill sites in Sweden, Italy, and Germany. These samples were analyzed by means of a highly sensitive and species-selective method for methyltin, butyltin, and octyltin species. In total, twelve samples from eight different landfill sites at various ages were investigated. The findings of all target compounds range between less than the limit of detection at 0.1 microg/L and, at maximum, 4 microg/L. Only octyltin compounds can be attributed to PVC products with any certainty, whereas for methyltin and butyltin compounds alternative and less distinct sources exist. Organotin compounds are subject to microbial transformation, such as dealkylation and methylation processes. Consequently, caution should be exercised when attributing findings to potential sources and deriving any predicted environmental concentrations.     

渗滤液回灌在实际应用中应注意的问题

本文介绍了垃圾填埋场渗滤液回灌的机理、优缺点,“干填埋”与“湿填埋”之间的区别。渗滤液回灌可增加填埋废物的含水率,加快垃圾的降解速率,减少渗滤液的处理时间,提高填埋气中甲烷的含量,加速填埋场稳定化进程。鉴于以上这些优点,渗滤液回灌作为一种渗滤液处理方式将会有极大的应用前景。但在实际应用中回灌的渗滤液容易泄漏而导致地下水污染,这是影响渗滤液回灌广泛应用的主要原因。为了避免使地下水受污染,本文总结和分析了渗滤液回灌在实际应用中应注意的问题。