Evaluation of municipal solid waste flow in the Bandung metropolitan area, Indonesia

This article covers partial results for research which was carried out to determine the effectiveness of municipal solid waste (MSW) recycling in Bandung metropolitan urban areas. It focuses on the results of waste flow analysis as basic information in developing better MSW management systems, especially in applying the reduce, reuse, recycle (3Rs) concept. The dependence upon final disposal sites in MSW management and the difficulties in finding disposal sites have resulted in interest in the 3Rs concept. In this research, the determination of waste compositions and the potential of recycling were evaluated based on data from interviews with householders, members of the nonhousehold sector, and recycling actors and on measurement. The informal sector activities observed were mainly from handcart crews, mobile scavengers, transfer point scavengers, final disposal scavengers, waste traders, and recycling business people at several locations in Bandung and Cimahi cities. The estimated waste recycling and composting by stakeholders has not yet achieved 10% (wet weight) of the total waste generated. As in other major cities in developing countries, the informal sectors hold an important role in the recovery of usable materials from waste. However, inorganic waste recycling activities from this sector have not even reached 8% (wet weight) of the total waste generated.     

大力推进城市资源循环利用基地建设——以北京市朝阳区资源循环利用产业基地为例

资源循环利用基地的建设是破解城市固体废弃物“邻避效应”的创新道路,有助于新型城市功能区的建设,是推进资源循环利用的主要方式。以北京市朝阳区资源循环利用产业基地为例,研究其基地建设的优势基础及制约因素,通过探索基地建设模式,分析了基地建设的总体思路和重要举措,以期为其他地区资源循环利用基地建设提供经验。     

On achieving the state's household recycling target: a case study of Northern New Jersey, USA

In recent times, the State of New Jersey (USA) has been making attempts at promoting recycling as an environmentally friendly means of attaining self-sufficiency at waste disposal, and the state has put in place a 50% recycling target for its municipal solid waste stream. While the environmental benefits of recycling are obvious, a recycling program must be cost effective to ensure its long-term sustainability. In this paper, a linear programming model is developed to examine the current state of recycling in selected counties in Northern New Jersey and assess the needs to achieve the state's recycling goal in these areas. The optimum quantities of waste to be sent to the different waste facilities, which include landfills, incinerators, transfer stations, recycling and composting plants, are determined by the model. The study shows that for these counties, the gap between the current waste practices where the recycling rate stands at 32% and the state's goal can be bridged by more efficient utilization of existing facilities and reasonable investment in expanding those for recycling activities.     

发达国家废玻璃回收利用经验及借鉴

介绍了发达国家处理和再利用废玻璃的经验,提出我国应借鉴发达国家经验,从科研、政策、法律等方面加强废玻璃的再利用工作。     

Developing a monitoring method facilitating continual improvements in the sorting of waste at recycling centres

Beneficial use of waste relies on efficient systems for collection and separation. In Sweden, a bring system involving recycling centres for collection of bulky, electr(on)ic and hazardous waste has been introduced. A significant share of this waste is incorrectly sorted, causing downstream environmental implications. At present, however, there is a lack of affordable and accurate monitoring methods for providing the recycling centres with the necessary facts for improving the sorting of waste. The aim of this study was therefore to evaluate the usability of a simplified and potentially more suitable waste monitoring method for recycling centres. This method is based on standardised observations where the occurrence of incorrect sorting is monitored by taking digital pictures of the waste which then are analysed according to certain guidelines. The results show that the developed monitoring method could offer a resource-efficient and useful tool for proactive quality work at recycling centres, involving continuous efforts in developing and evaluating measures for improved sorting of waste. More research is however needed in order to determine to what extent the obtained results from the monitoring method are reliable.     

Estimation of building-related construction and demolition waste in Shanghai

One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.     

Solid Waste Recycling And Reuse In Bangkok

Materials recovered from solid waste in Bangkok are mainly glass bottles, paper and paper products, plastic products and metals. Materials are separated at three different stages of the collection process: at the source, prior to collection; by the crews of the collection vehicle; and by the scavengers at the dump site. The total daily tonnage of recyclable garbage collected at the source by the waste pickers is estimated at 286 tonnes, about 5% of the garbage collected by the city. There are small scale recycling shops (SSR) located around the main disposal sites where collected materials are sold by the collection crews and the scavengers. The quantity of materials delivered to the SSR shops by the collection crew vary between 1-6 tonnes per day. The amount of materials recovered by the scavengers (at the dump site) varies between 50-150 kg person^-1 day^-1. Therefore around 7.5% of the solid waste is recycled. In Bangkok both formal and informal sectors manufacture paper pulp, cardboard boxes and magazines from the recyclable paper. Paper products which account for 55% of the total waste stream are considered as the largest "product group" in the municipal solid waste. Recyclable glass (1-3% of the total waste stream) or cullet is used to manufacture plain glasses or cups. Plastics constitute about 10-15% of the waste stream. The benefit/cost ratios of production of most of these industries were reported to be higher than 1.5. In order to enhance recycling, legislative measures need to be introduced and enforced. In Thailand, there is, however, no law concerning recycling. There is no incentive for the consumer to separate solid waste for recycling, as the prices of waste in Bangkok are low and inconsistent. Therefore the pricing system should be more organized for recycling to be more effective.     

Searching quality data for municipal solid waste planning

Effective waste reduction and recycling is predicated upon credible data on refuse generation and disposal. Despite improvements in the quality of data for municipal solid wastes (MSW) disposal, dependable generation and recycling statistics to support planning, regulation and administration are lacking. The available aggregates on national waste production from two sources do not conform to each other and fail to serve the requirements of local solid waste planning. As recycling estimates will be difficult to discern, the collection of generation data based on weighing waste samples at generator sites has been portrayed as the key for developing sustainable local databases. The coefficients developed from the databases for the various categories of residential, commercial, industrial and institutional wastes can be used as variables for waste generation models.     

The effectiveness of recycling policy options: Waste diversion or just diversions?

Recycling is becoming ever more important as waste generation rates increase globally. Policy-makers must decide which recycling practices to implement from the host of options at their disposal to best divert waste from landfill. This study strived to determine the most important characteristics in recycling programs that were associated with higher material recovery rates, including bag limits, user pay programs, the number of materials collected, curbside collection frequency, promotion and education (P&E) activities, Best Practice principles, and the type of recycling collection stream. Data collected from 223 recycling programs in Ontario during 2005–2010 were used to perform multiple regression analyses. The findings of this study suggest that attributes of convenience are more important to encourage recycling than those that penalize disposal, thus providing important implications for waste policy-makers, both in Ontario and in other jurisdictions.     

Solid waste management in Indian Himalayan tourists' treks: a case study in and around the Valley of Flowers and Hemkund Sahib

Solid waste generation in sensitive tourist areas of the Indian Himalayan region is approaching that of some metro cities of the country. The present study showed approximately 288 g waste generation visitor(-1) day(-1) compared with the nation-wide average of 350 g capita(-1) day(-1). About 29 metric tonnes (MT) solid waste is generated along a distance of about 19-km trek (a stretch of land or distance between two or more places covered by a walk) during a 4-month tourist season every year. Treks and trek stalls are the two major places where the visitors generate solid waste. Waste estimated from stalls accounted for about 51% by weight of the total waste generation in the trekking region. The native villagers generally construct stalls every year to meet the requirement of visitors going to Valley of Flowers (VOF) and Hemkund Sahib. The average annual results of 2 years (or equivalent to the average of one, 4-month tourist season for the region) showed non-biodegradable waste (NBW) to be 96.3% by weight whereas biodegradable waste (BW) amounted to merely 3.7%. From management point of view of the government, 96% NBW could easily be reused and recycled. Nevertheless, the need is to manage this waste by bringing it from the trekking areas to the road head (Govind Ghat) first and then to transport it to adjacent recycling centers. Cold drink glass bottles (68%), plastic (26%) and metal (2%) were the major items contributing to non-biodegradable waste. The remaining organic waste could be used as feedstock for composting. A well coordinated effort of public participation is necessary at all the levels for managing waste. There is a need to educate the visitors to instill in them the habit of considering discarded waste as potentially valuable and manageable.     

Optimal design for sustainable development of a material recovery facility in a fast-growing urban setting

Installing material recovery facilities (MRFs) in a solid waste management system could be a feasible alternative to achieve sustainable development goals in urban areas if current household and curbside recycling cannot prove successful in the long run. This paper addresses the optimal site selection and capacity planning for a MRF in conjunction with an optimal shipping strategy of solid waste streams in a multi-district urban region. Screening of material recovery and disposal capacity alternatives can be achieved in terms of economic feasibility, technology limitation, recycling potential, and site availability. The optimization objectives include economic impacts characterized by recycling income and cost components for waste management, while the constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening constraints. A case study for the City of San Antonio, Texas (USA) presents a vivid example where scenario planning demonstrates the robustness and flexibility of this modeling analysis. It proves especially useful when determining MRF ownership structure. Each scenario experiences two case settings: (1) two MRF sites are proposed for selection and (2) a single MRF site is sought. Cost analysis confirms processing fees are not the driving force in the City's operation, but rather shipping cost. Sensitivity analysis solidifies the notion that significant public participation plays the most important role in minimizing solid waste management expenses.     

Issues and options for the safe destruction and disposal of used injection materials

It has long been known that the re-use of syringes can cause the spread of infections such as HIV and hepatitis. The production of disposable syringes was undertaken as a solution to the infection problem. In developing countries, however, there has been an unwanted result: the re-use and recycling of disposable syringes. One response has been "auto-disable" syringes that lock the plug and piston in place after a single use. These types of approaches, however, have resulted in greatly increased volumes of used injection materials. This is a particular problem in developing countries where contaminated medical wastes find their way into municipal garbage where people are known to scavenge and recycle. This poses obvious health risks, both in terms of direct exposure and environmental contamination. This study of issues and options for the safe destruction and disposal of used injection materials was undertaken using document analysis was to bring together and summarise approaches to the inter-related issues of "syringe re-use" and "clinical waste disposal". The authors suggest that holistic approaches to syringe use and clinical waste disposal need to be utilized in addressing the situation outlined. The focus is on technology and procedures that may be adaptable to rural areas in developing countries.     

Electrical separation of plastics coming from special waste

Minimisation of waste to landfilling is recognised as a priority in waste management by European rules. In order to achieve this goal, developing suitable technologies for waste recycling is therefore of great importance. To achieve this aim the technologies utilised for mineral processing can be taken into consideration to develop recycling systems. In particular comminution and separation processes can be adopted to recover valuable materials from composite waste. In this work the possibility of recycling pharmaceutical blister packaging has been investigated. A suitable comminution process has been applied in order to obtain the liberation of the plastic and aluminium components. Experiments of electrical separation have been carried out in order to point out the influence of the process parameters on the selections of the different materials and to set up the optimum operating conditions.     

Model development for household waste prevention behaviour

Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude–behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz’s altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals’ engagement in future policies.     

Improving the layout of recycling centres by use of lean production principles

There has been increased focus on recycling in Sweden during recent years. This focus can be attributed to external environmental factors such as tougher legislation, but also to the potential gains for raw materials suppliers. Recycling centres are important components in the Swedish total recycling system. Recycling centres are manned facilities for waste collection where visitors can bring, sort and discard worn products as well as large-sized, hazardous, and electrical waste. The aim of this paper was to identify and describe the main flows and layout types at Swedish recycling centres. The aim was also to adapt and apply production theory for designing and managing recycling centre operations. More specifically, this means using lean production principles to help develop guidelines for recycling centre design and efficient control.Empirical data for this research was primarily collected through interviews and questionnaires among both visitors and employees at 16 Swedish recycling centres. Furthermore, adapted observation protocols have been used in order to explore visitor activities. There was also close collaboration with a local recycling centre company, which shared their layout experiences with the researchers in this project.The recycling centres studied had a variety of problems such as queues of visitors, overloading of material and improper sorting. The study shows that in order to decrease the problems, the recycling centres should be designed and managed according to lean production principles, i.e. through choosing more suitable layout choices with visible and linear flows, providing better visitor information, and providing suitable technical equipment. Improvements can be achieved through proper planning of the layout and control of the flow of vehicles, with the result of increased efficiency and capacity, shorter visits, and cleaner waste fractions. The benefits of a lean production mindset include increased visitor capacity, waste flexibility, improved sorting quality, shorter time for visits and improved working conditions.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

The role of intergenerational influence in waste education programmes: the THAW project

Whilst the education of young people is often seen as a part of the solution to current environmental problems seeking urgent attention, it is often forgotten that their parents and other household members can also be educated/influenced via home-based educational activities. This paper explores the theory of intergenerational influence in relation to school based waste education. Waste Watch, a UK-based environmental charity (www.wastewatch.org.uk), has pioneered a model that uses practical activities and whole school involvement to promote school based action on waste. This methodology has been adopted nationally. This paper outlines and evaluates how effective school based waste education is in promoting action at a household level. The paper outlines Waste Watch's 'Taking Home Action on Waste (THAW)' project carried out for two and half years in Rotherham, a town in South Yorkshire, England. The project worked with 6705 primary age children in 39 schools (44% of primary schools in the project area) to enable them to take the "reduce, reuse and recycle message" home to their families and to engage these (i.e. families) in sustainable waste management practices. As well as substantial increases in students' knowledge and understanding of waste reduction, measurement of the impact of the project in areas around 12 carefully chosen sample schools showed evidence of increased participation in recycling and recycling tonnages as well as declining levels of residual waste. Following delivery of the project in these areas, an average increase of 8.6% was recorded in recycling set out rates which led to a 4.3% increase in paper recycling tonnages and an 8.7% increase in tonnages of cans, glass and textiles collected for recycling. Correspondingly, there was a 4.5% fall in tonnages of residual waste. Waste Watch's THAW project was the first serious attempt to measure the intergenerational influence of an education programme on behaviour at home (i.e. other than schools' own waste). It clearly shows that household recycling behaviour can be positively impacted by intergenerational influence via a practical school-based waste education model. However, although the model could potentially have a big impact if rolled out nationally, it will require seed funding and the long-term durability of the model has not yet been fully quantified.     

Raw material potential of recyclable materials for fiber composites: a review study

The aim of this study is to investigate waste streams as a source of recyclable raw material for fiber composite production. Globally, vast volumes of waste are produced daily that are not recycled effectively. In this work, three different raw material sources are examined; industrial, construction and municipal solid waste streams. All three sources produce wastes that are currently underutilized. Usage areas for the waste material include use as a reinforcing fiber, as part of the plastic matrix or as a filler. The industrial sector produces more homogenous waste, while waste from municipalities is mixed. Irregular material flow, the varying condition of the waste and different pretreatments used pose difficulties for recycling. Furthermore, some materials are industry-specific and may be produced in only certain areas. Despite these difficulties, huge amount of potentially useful exploitable waste is available and using different waste streams as a part of wood-plastic composite production can reduce waste volumes disposed to landfill.     

Beneficiation of graphite fines from moulding factory wastes.

As the costs of waste disposal increase, more attention is being placed upon the re-use and recycling of valuable minerals contained within the waste streams. In this article, the waste streams from a moulding factory were treated by physical methods to obtain a re-usable graphite fraction. Multi-gravity separators (MGS) and shaking tables (ST) are being used in coal processing and heavy minerals beneficiation. In the present study, the possibility of using an MGS and ST to separate graphite from moulding sand was analysed as part of such investigations. The effects of changes in different process variables on the concentrate sand content and graphite recovery values were studied. Several parameters, thought to have an effect on the separation were tested. After the ST experiments, a graphite concentrate was obtained having 4.5% sand content with 60.8% recovery. After the investigations carried out by MGS, a graphite concentrate was obtained having 0.95% sand content with 68.0% recovery. The results demonstrated that recovered graphite fractions can be re-used in the factory, thus reducing the quantity of waste and costs.