An overview of recovery of metals from slags

Various slags are produced as by-products in metallurgical processes or as residues in incineration processes. According to the origins and the characteristics, the main slags can be classified into three categories, namely ferrous slag, non-ferrous slag and incineration slag. This paper analysed and summarised the generation, characteristics and application of various slags, and discussed the potential effects of the slags on the environment. On this basis, a review of a number of methods for recovery of metals from the slags was made. It can be seen that a large amount of slags is produced each year. They usually contain a quantity of valuable metals except for blast furnace slag and they are actually a secondary resource of metals. By applying mineral processing technologies, such as crushing, grinding, magnetic separation, eddy current separation, flotation and so on, leaching or roasting, it is possible to recover metals such as Fe, Cr, Cu, Al, Pb, Zn, Co, Ni, Nb, Ta, Au, and Ag etc. from the slags. Recovery of metals from the slags and utilisation of the slags are important not only for saving metal resources, but also for protecting the environment.     

An overview of municipal solid waste management in China

Municipal solid waste management (MSWM) in China warrants particular attention as China has become the largest MSW generator in the world and the total amount of MSW it produces continues to increase. In recent years, central and local governments have made great efforts to improve MSWM in China. New regulations and policies have been issued, urban infrastructure has been improved, and commercialization and international cooperation have been encouraged. Considering these developments, an overview is necessary to analyze the current state as well as new opportunities and challenges regarding MSWM in China. This paper shows that since the late 1990s, the amount of MSW collected has been largely decoupled from economic growth and incineration has become an increasingly widespread treatment method for MSW. We identify and discuss four major challenges and barriers related to China’s MSWM, and propose an integrated management framework to improve the overall eco-efficiency of MSWM.     

An overview on the production of pigment grade titania from titania-rich slag.

To recover pigment grade TiO2, operating plants all over the world use chemical processes. Slag-based technology is considered to be attractive because of low waste generation and low chemical cost due to high titanium content and is poised to replace the conventional technology. This paper provides a review of the slag-based technology with the specific aim to produce leachable slag and achieving high titania yield from recovered wastes. Leachable oxides of the lower oxidation state, such as TiO and Ti2O3, facilitate the leaching process. However, during smelting these oxides increase the viscosity of the slag. Formation of titanium carbide or carbonitride is also not desirable as it leads to resistance to the leaching of titanium. This report highlights the problems and their possible solutions to obtain leachable slag.     

An overview of metals recovery from thermal power plant solid wastes

Thermal power plants (TPPs) that burn fossil fuels emit several pollutants linked to the environmental problems of acid rain, urban ozone, and the possibility of global climate change. As coal is burned in a power plant, its noncombustible mineral content is partitioned into bottom ash, which remains in the furnace, and fly ash, which rises with flue gases. Two other by-products of coal combustion air-pollution control technologies are flue gas desulfurization (FGD) wastes and fluidized-bed combustion (FBC) wastes. This paper analyzed and summarized the generation, characteristics and application of TPP solid wastes and discussed the potential effects of such solid wastes on the environment. On this basis, a review of a number of methods for recovery of metals from TPP solid wastes was made. They usually contain a quantity of valuable metals and they are actually a secondary resource of metals. By applying mineral processing technologies and hydrometallurgical and biohydrometallurgical processes, it is possible to recover metals such as Al, Ga, Ge, Ca, Cd, Fe, Hg, Mg, Na, Ni, Pb, Ra, Th, V, Zn, etc., from TPP solid wastes. Recovery of metals from such wastes and its utilization are important not only for saving metal resources, but also for protecting the environment.     

An overview of methods for biodegradability testing of biopolymers and packaging materials

This paper gives an overview of the methods used at the Technical Research Centre of Finland (VTT) for the biodegradability testing of solid polymers and packaging materials. Biodegradability of each polymer included in the packaging material should be separately tested. Aquatic aerobic and anaerobic tests and, in specific cases, enzymatic tests are used for screening purposes. The application of aquatic aerobic tests—an automated Sturm test (OECD 301B; ASTM D5209) and a VTT headspace test as well as an anaerobic test (ASTM D5210)—is discussed. Three composting tests and their applications are summarized. These tests are regarded as important because they can be used to simulate the biodegradability under real-life conditions. Several tests are needed to determine the fate of the polymer under real conditions and to study its biodegradability in different environments. The time needed for complete biodegradation of polymers in nature is impossible to predict with laboratory tests and should be studiedin vivo.According to the lecture given in Sweden at the Royal Institute of Technology, at a workshop on polymers from renewable resources and their degradation, November 10–11, 1994.     

Citrus essential oils and their influence on the anaerobic digestion process: An overview

Citrus waste accounts for more than half of the whole fruit when processed for juice extraction. Among valorisation possibilities, anaerobic digestion for methane generation appears to be the most technically feasible and environmentally friendly alternative. However, citrus essential oils can inhibit this biological process. In this paper, the characteristics of citrus essential oils, as well as the mechanisms of their antimicrobial effects and potential adaptation mechanisms are reviewed. Previous studies of anaerobic digestion of citrus waste under different conditions are presented; however, some controversy exists regarding the limiting dosage of limonene for a stable process (24–192 mg of citrus essential oil per liter of digester and day). Successful strategies to avoid process inhibition by citrus essential oils are based either on recovery or removal of the limonene, by extraction or fungal pre-treatment respectively.     

An overview on the processes and technologies for recycling cathodic active materials from spent lithium-ion batteries

This paper aims to make an overview on the current status and new tendency for recycling cathodic active materials from spent lithium-ion batteries. Firstly, it introduces several kinds of pretreatment technologies, followed by the summary of all kinds of single recycling processes mainly focusing on organic acid leaching and synergistic extraction. Then, several examples of typical combined processes and industrial recycling processes are presented in detail. Meanwhile, the advantages, disadvantages and prospect of each single process, combined process, as well as industrial recycling processes, are discussed. Finally, based on a novel acidic organic solvent, the authors briefly introduce an environmental friendly process to directly recycle and resynthesize cathodic active material LiNi_1/3Co_1/3Mn_1/3O₂ from spent lithium-ion batteries. The preliminary experimental results demonstrated the advantages of low reaction temperature, high separation efficiency and organic solvent cycling and preventing secondary pollution to the environment. This process may be used for large-scale recycling of spent lithium-ion batteries after further study.     

An overview of municipal solid waste management in Inner Mongolia Autonomous Region,China

Rapid industrialization and urbanization in developing countries have created serious problems in municipal solid waste (MSW) management. New case studies can shed light on these problems and point the way to potential solutions for improving the overall eco-efficiency of MSW management. This paper employs a case study approach, analyzing MSW management in Inner Mongolia. This study encompasses all aspects of MSW management, including collection, separation, recycling, and disposal. Problems and challenges are identified through our analysis, and recommendations are raised by considering the local realities. Our main findings are: (1) while large cities have already established a solid foundation for MSW management, small- and medium-sized cities deserve more attention; (2) MSW in rural areas is even worse than urban areas; (3) enforcement of MSW regulations is ineffective and needs improvement; (4) lack of funds, R&D efforts and advanced technologies have impeded sustainable MSW management; (5) lack of coordination and communication among different stakeholders further damages the efforts for improvement of MSW management. Therefore, integrated efforts that combine the above concerns should be initiated so that the overall effectiveness and efficiency of MSW management can be improved.     

An evaluation of the performance of multiple passive diffusion devices for indoor air sampling of VOCs

The United States Environmental Protection Agency is considering recommending longer‐term sampling to achieve more accurate time‐weighted‐average detections for indoor air monitoring of volatile organic chemicals. The purpose of the research presented herein was to compare longer sampling times using passive diffusion samplers to the results from shorter‐term testing periods using sorbent tubes and low‐flow pumps (US EPA Method TO‐17) at great frequency for trichloroethene (TCE) in indoor air. A controlled release of TCE in a large room allowed for over two‐orders‐of‐magnitude daily concentration variability over the course of the two‐week monitoring event. The daily concentration measurements by US EPA Method TO‐17 and the passive diffusion samplers were performed in triplicate and had excellent reproducibility. The results of daily tests were averaged and compared with four passive diffusion devices exposed to indoor air for three, seven, ten, and fourteen days in accordance with ASTM D6196‐02. A specific uptake rate for each of the passive devices at the four different time intervals and the statistical significance of the time‐varying uptake rates were evaluated. The performance of each passive diffusion device was determined using a statistical performance criterion. The average concentration for all of the exposure periods could be reliably predicted using the established uptake rates for two of the four passive devices. © 2009 Wiley Periodicals, Inc.     

An Original Halo-Alkaline Protease from <Emphasis Type="Italic">Bacillus halodurans</Emphasis> Strain US193: Biochemical Characterization and Potential Use as Bio-Additive in Detergents

Over a hundred of halophilic/halotolerant microorganisms were screened for alkaline protease production. The bacterium showing the highest enzyme production was characterized and identified as Bacillus halodurans US193 on the basis of 16S rRNA gene analysis. It was alkalophilic, thermophilic and halotolerant since it grew optimally at pH 9.7 and 50?°C with tolerance of up to 125 g NaCl l^?1. The alkaline protease was purified 4.9 times with about 40186.1 U/mg as specific activity. It exhibited optimal activity at pH 10, 70?°C and 0.25 M NaCl with perfect stability at wide ranges of pH (6–12), temperatures (30–60?°C) and NaCl concentrations (0–2 M). The serine alkaline protease maintained high stability in the presence of Cu²⁺, Mg²⁺, Ba²⁺ and Ca²⁺ ions, various organic solvents [50% (v/v)] and ionic and non ionic detergent additives. In addition, it was more compatible with various commercialized detergents than other reported detergent proteases, and was very efficient in blood stain removal. These findings let B. halodurans US193 alkaline protease be an ideal candidate for many industrial processes at harsh conditions, especially as a bio-additive in detergent industry.     

国内废钢行业概况及废钢价格关联因素的量化研究

介绍了"十五"和"十一五"时期国内废钢行业发展概况,重点阐述废钢行业的回收供应以及消耗情况,并对影响废钢价格的因素进行数学建模,对关联程度大小进行量化,对更好地分析废钢市场走势有较好的指导意义。     

基于微电荷法的烟气颗粒物浓度检测技术及其应用

目前针对烟气颗粒物浓度的检测方法较多,但均存在不足。详细分析了基于微电荷法的烟气颗粒物浓度检测技术的基本原理和关键的技术难点,介绍了由于微处理器、数字电子技术和材料科学等的飞速发展带来的技术革新,技术的进步为其应用开拓了更为广泛的应用领域并逐步在工业场合得到推广。     

Oil-spill research program of the US Minerals Management Service

Current oil-spill research funded by the US Department of the Interior, Minerals Management Service (MMS), emphasizes technology development in the fields of in situ burning, spill counter-measure standardization using large wave tank testing, remote sensing and oil-spill trajectory analysis. Research projects include efforts in large field observational programs, surface drifters, and modeling to support trajectory simulation in the Gulf of Mexico and the Santa Barbara Channel. Research progress is outlined with emphasis on data-sharing and collaborative efforts.     

Woodchip-mixing porous mortar’s adsorption of cesium in aqueous media

Journal of Material Cycles and Waste Management - The radioactive cesium (radio-Cs) released following the Fukushima Daiichi Nuclear Power Plant accident was unevenly distributed in soil, sediment,...     

火电厂对生态环境影响的总体评价

抛弃了以往在分析污染排放物对环境影响时只对不同污染物进行单独分析的做法,从单位污染物对大气的影响和生产单位有用能的污染物排放量两方面考虑,建立了一个通用的、能综合评价各种污染物对环境总体影响的模型--能源生态效率模型,并对燃烧不同燃料火电厂的能源生态效率作了计算,对能源生态效率的影响因素进行了分析.     

Recommended methodology for measurements of PCDD and PCDF in the nordic countries

In April 1986 the Nordic Council of Ministers recommended that the Nordic countries use a specific method for measurements of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in flue gas emissions from waste combustion. The recommended protocol, which will be re-evaluated in a years time, includes the following.A one week registration period during which the plant is studied by continuous registration of a number of operating and emission parameters. The sampling period is included in this time.A sampling procedure based on a heated filter followed by a condenser, a bottle for the condensate and an adsorbent column. Before the sampling, at least two labelled PCDD are added to the filter.No specified analytical procedure. A labelled PCDF is added before the clean-up procedure and an injection standard before the final analysis. The laboratory is free to use any method that gives at least 25% recovery of the sampling standards and 50% recovery of the clean-up standard.Reporting requirements include homologue specific results for PCDD and PCDF containing four to eight chlorine atoms as well as isomer-specific results for the “dirty dozen”. The results should be compensated for incomplete recoveries and the factors used should be reported.     

Superfund site remediation by landfilling—overview of landfill design,operation, closure,and postclosure issues

This article discusses the appropriateness of using landfills as part of remediating hazardous chemical and Superfund sites, with particular emphasis on providing for true long‐term public health and environmental protection from the wastes and contaminated soils that are placed in the landfills. On‐site landfilling or capping of existing wastes is typically the least expensive approach for gaining some remediation of existing hazardous chemical/Superfund sites. The issues of the deficiencies in US EPA and state landfilling approaches discussed herein are also applicable to the landfilling of municipal and industrial solid “nonhazardous” wastes. These deficiencies were presented in part as “Problems with Landfills for Superfund Site Remediation” at the US EPA National Superfund Technical Assistance Grant Workshop held in Albuquerque, New Mexico, in February 2003. They are based on the author's experience in investigating the properties of landfill liners and the characteristics of today's landfills, relative to their ability to prevent groundwater pollution and to cause other environmental impacts. Discussed are issues related to both solid and hazardous waste landfills and approaches for improving the ability of landfills to contain wastes and monitor for leachate escape from the landfill for as long as the wastes in the landfill will be a threat. © 2004 Wiley Periodicals, Inc.