Measurements of human exposure from emerging wireless technologies

The rapid development of wireless technologies leads to increased human exposure to electromagnetic fields from new devices. Most of these technologies communicate in short to medium range. Communication devices, such as mobile phones (GSM, UMTS, LTE) and wireless computer networks (WLAN, HSDPA, WIMAX) usually work at distances up to some 10 km. Other techniques like Bluetooth, RFID, and wireless USB work at distances up to a few meters. RFID systems can use several frequency bands from low frequencies up to microwaves. The other technologies are mainly using microwave frequencies. Most of these technologies have a rather low-output power, typically <1 W average power, except for fixed transmitters like base stations. This means that the exposure from distant sources is low. If the devices are kept close to the body, the local exposure can be in the range of the levels in the ICNIRP recommendation; this is the case, for example, for mobile phones and WLAN transmitters in laptops. For distant sources, there exist several measurement techniques such as spectrum analysers, measurement receivers, and broadband meters. For sources used close to the body, the local SAR levels have to be determined. For this purpose, instruments measuring the local electric field inside body phantoms have been developed. An alternative to measurements is numerical simulations. If one has knowledge of the signal characteristics of the different technologies then it is possible to find a suitable measurement technique to assess the human exposure.     

Recent trends in treatment technologies of emerging contaminants

In the recent years a group of contaminants, known collectively as emerging contaminants (ECs), have attracted considerable attention due to their widespread in the environment, and lack of knowledge on their impacts on ecosystem and human health. This review gives an overview on the sources, impacts, and conventional treatment technologies of ECs and an in-depth review of the literature on the state-of-the-art treatment technologies and their performance in the removal of ECs from water sources and drinking water. A careful statistical analysis of the number of publications on the different treatment technologies of ECs was performed to identify the hot spots in this research area. Conventional treatment technologies are not able to remove ECs sufficiently. The discharge of raw or partially treated wastewater is the main source of ECs in the environment. The research in recent years is focusing on using advanced treatment process (AOPs), followed by adsorption and membrane technologies. From a technical point of view, AOPs surpass other treatment technologies as they can completely eradicate ECs without the generation of side products. Developing efficient, green, and cost-effective materials to be used as adsorbents, photocatalysts, membranes, or membrane fillers, is one of the main research trends nowadays. Combined AOPs based on exploiting solar light, ultrasound and electrochemistry are gaining growing interest and show high potential for the treatment of ECs.     

The NICE-Whyco technologies partnership: saving energy, dollars, and the environment in the metal plating industry

In partnership with the US Department of Energy’s Office of Industrial Technology, Whyco Technologies, Inc., has developed an innovative perforated plating barrel used in the plating of metal parts. This new technology employs a thin-walled construction, differing from the traditional thick-wall design required to provide adequate structural integrity. The thicker walls lowered the efficiency of transferring plating solution into and out of the barrel and diminished the electrical current pushed through the holes and onto the parts being plated. By machining pockets out of the traditional thick-walled perforated structure, Whyco produced a ‘honeycomb’ of staggered cells, allowing for the greatest number of holes per open area while maintaining structural integrity. Hydrodynamic pumping occurs during barrel rotation to create greater solution transfer than in traditional barrels. The Whyco barrel has higher current density plating, which leads to faster plating cycles, reduced bath concentration, and better plating of difficult chemistries such as in alloys. This new technology has helped the company reduce energy use by 16%, eliminate more than 480 tons/year of solid waste, and reduce wastewater by more than 17 000 gallons/day. The resulting cost savings total more than $500 000 annually. The company has manufactured and sold more than 275 of these barrels to other electroplating companies that are reporting up to a 40% increase in plating productivity and similar energy and environmental impacts.     

铬渣处理处置技术研究进展

介绍了国内外铬渣处理处置技术的研究现状,并对各种处理处置技术的解毒机理、工艺条件及过程、优缺点、以及实践应用状况进行了分析.     

Catalysts for change: the emerging role of participatory research in land management

Land management is a complex process which involves the interaction of biophysical and social variables. New demands are being placed on biophysical researchers working in land management to communicate more effectively with the public and to involve the public in the research process. The catalysts for change in the practice of land management research are clearly outlined with respect to pressures from new government policies, from institutions funding research, from communities in which the research is occurring and from within the academic environment itself. In order to meet these new demands, collaborative efforts – incorporating different academic disciplines and between researchers and communities – must occur. Traditional scientific approaches can benefit from the incorporation of techniques and approaches used within participatory research. The concept of participation and its relevance to biophysical research in land management is discussed, as well as the key characteristics of participatory research. Examples, predominantly from Australia, are provided; however the global scope of the changes is highlighted.It is increasingly recognized that agriculture is a complex social process, not simply a complex, diverse and risky technical activity. This implies new theoretical as well as methodological challenges..(present author's emphasis) (Scoones and Thompson, 1994, p. 5).     

Simulation and optimization technologies for petroleum waste management and remediation process control

Leakage and spill of petroleum hydrocarbons from underground storage tanks and pipelines have posed significant threats to groundwater resources across many petroleum-contaminated sites. Remediation of these sites is essential for protecting the soil and groundwater resources and reducing risks to local communities. Although many efforts have been made, effective design and management of various remediation systems are still challenging to practitioners. In recent years, the subsurface simulation model has been combined with techniques of optimization to address important problems of contaminated site management. The combined simulation-optimization system accounts for the complex behavior of the subsurface system and identifies the best management strategy under consideration of the management objectives and constraints. During the past decades, a large number of studies were conducted to simulate contaminant flow and transport in the subsurface and seek cost-effective remediation designs. This paper gives a comprehensive review on recent developments, advancements, challenges, and barriers associated with simulation and optimization techniques in supporting process control of petroleum waste management and site remediation. A number of related methodologies and applications were examined. Perspectives of effective site management were investigated, demonstrating many demanding areas for enhanced research efforts, which include issues of data availability and reliability, concerns in uncertainty, necessity of post-modeling analysis, and usefulness of development of process control techniques.     

Empowering environmentally-burdened communities in the US: A primer on the emerging role for information technology

This article is a primer on the emerging role for Information Technology (IT) in the Environmental Justice (EJ) movement. It explores current and potential uses of IT by EJ organisations fighting to protect vulnerable local environments and it addresses some of the barriers to more widespread movement efficacy via e-advocacy. We argue a chief but not insurmountable barrier is the disproportionate access to, and knowledge of, the benefits of using IT in the struggle for equitable decisions about environmental impacts.     

Victoria's emerging framework of regional governance for sustainability: the case of catchment management authorities and regional catchment strategies

The aim of this paper is to presents a progress report on how a subnational jurisdiction, the Australian state of Victoria, is attempting to implement regional governance for sustainability through its catchment planning framework. The paper examines the lessons learnt from a best practice approach to the implementation of network governance to see whether there are actions that can be taken to improve regional governance for sustainability in Victoria. The authors argue that Victoria is implementing a network governance approach to natural resource management (NRM) as a significant component of sustainability and that this has certain advantages. In particular the emergence of Regional Catchment Strategies developed by the State's ten statutory Catchment Management Authorities as 'regional sustainability blueprints' is bringing a significant level of maturity to the state's governance framework. Furthermore the state is currently working to complete its governance for sustainability through new statewide integrating frameworks—an Environmental Sustainability Framework as well as a statewide Catchment Management and Investment Framework. The paper concludes that taking a network governance approach could have transformative potential but there are significant challenges ahead: the complex task of aligning of national, state, catchment and local government strategies through an outcomes focus; the scarcity of mechanisms and tools to assist in translation of strategies into integrated investment priorities; gaps in knowledge and understanding of natural resource management problems; limitations in the capacity of regional and local bodies, including local government; and getting the policy tools right within the framework. However, as the best practice examples illustrate, taking a gradual approach to the development of the institutions—building on successive wins in capacity—is the best and only way to proceed.     

Victoria's emerging framework of regional governance for sustainability: the case of catchment management authorities and regional catchment strategies

The aim of this paper is to presents a progress report on how a subnational jurisdiction, the Australian state of Victoria, is attempting to implement regional governance for sustainability through its catchment planning framework. The paper examines the lessons learnt from a best practice approach to the implementation of network governance to see whether there are actions that can be taken to improve regional governance for sustainability in Victoria. The authors argue that Victoria is implementing a network governance approach to natural resource management (NRM) as a significant component of sustainability and that this has certain advantages. In particular the emergence of Regional Catchment Strategies developed by the State's ten statutory Catchment Management Authorities as 'regional sustainability blueprints' is bringing a significant level of maturity to the state's governance framework. Furthermore the state is currently working to complete its governance for sustainability through new statewide integrating frameworks—an Environmental Sustainability Framework as well as a statewide Catchment Management and Investment Framework. The paper concludes that taking a network governance approach could have transformative potential but there are significant challenges ahead: the complex task of aligning of national, state, catchment and local government strategies through an outcomes focus; the scarcity of mechanisms and tools to assist in translation of strategies into integrated investment priorities; gaps in knowledge and understanding of natural resource management problems; limitations in the capacity of regional and local bodies, including local government; and getting the policy tools right within the framework. However, as the best practice examples illustrate, taking a gradual approach to the development of the institutions—building on successive wins in capacity—is the best and only way to proceed.     

An overview and analysis of site remediation technologies

This paper presents an analysis of the site restoration techniques that may be employed in a variety of contaminated site cleanup programs. It is recognized that no single specific technology may be considered as a panacea for all contaminated site problems. An easy-to-use summary of the analysis of the important parameters that will help in the selection and implementation of one or more appropriate technologies in a defined set of site and contaminant characteristics is also included.     

Assessing alternative energy technologies for developing countries: Technology assessment groups and software

Summary This paper compares two forms of public participation in the assessment of appropriate energy technologies: a centralised top- down approach, and an approach based on grass roots empowerment. The example chosen to demonstrate the former is the Community Based Technology Assessment Program in the United States, and examples of the latter are drawn from efforts at assessing biogas technologies in Korea, Thailand and Papua New Guinea. The analysis includes the assessment of each case study in terms of conditions for public participation derived from the literature. Findings point to the need for empowered technology assessment groups and institutional support for program implementation, or "software", for future efforts at diffusing alternative energy technologies to rural settlements in developing countries. In addition, a role for women in technology assessment is recommended.Mr Subbakrishna has been involved with rural development processes in Nigeria, Kenya and India. With a background in the Earth Sciences from the Indian Institute of Technology, Kharagpur, his current specialisation is in natural resource management and energy policy. He is currently engaged in doctoral work at the Energy Center, University of Pennsylvania, USA.Julia Gardner teaches Environmental Management in the School of Community and Regional Planning at the University of British Columbia. She holds a PhD in Geography from the University of Canterbury, New Zealand. Her current research is in the areas of sustainable development and citizen involvement in natural resource management, based at the Westwater Research Center, University of British Columbia.     

Emerging technologies for removing nonpoint phosphorus from surface water and groundwater: introduction

Coastal and freshwater eutrophication continues to accelerate at sites around the world despite intense efforts to control agricultural P loss using traditional conservation and nutrient management strategies. To achieve required reductions in nonpoint P over the next decade, new tools will be needed to address P transfers from soils and applied P sources. Innovative remediation practices are being developed to remove nonpoint P sources from surface water and groundwater using P sorbing materials (PSMs) derived from natural, synthetic, and industrial sources. A wide array of technologies has been conceived, ranging from amendments that immobilize P in soils and manures to filters that remove P from agricultural drainage waters. This collection of papers summarizes theoretical modeling, laboratory, field, and economic assessments of P removal technologies. Modeling and laboratory studies demonstrate the importance of evaluating P removal technologies under controlled conditions before field deployment, and field studies highlight several challenges to P removal that may be unanticipated in the laboratory, including limited P retention by filters during storms, as well as clogging of filters due to sedimentation. Despite the potential of P removal technologies to improve water quality, gaps in our knowledge remain, and additional studies are needed to characterize the long-term performance of these technologies, as well as to more fully understand their costs and benefits in the context of whole-farm- and watershed-scale P management.     

Accelerating the deployment of carbon capture and storage technologies by strengthening the innovation system

In order to take up the twin challenge of reducing carbon dioxide (CO₂) emissions, while meeting a growing energy demand, the potential deployment of carbon dioxide capture and storage (CCS) technologies is attracting a growing interest of policy makers around the world. In this study we evaluate and compare national approaches towards the development of CCS in the United States, Canada, Norway, the Netherlands, and Australia. The analysis is done by applying the functions of innovation systems approach. This approach posits that new technology is developed, demonstrated and deployed in the context of a technological innovation system. The performance assessment of the CCS innovation system shows that the extensive knowledge base and knowledge networks, which have been accumulated over the past years, have not yet been utilized by entrepreneurs to explore the market for integrated CCS concepts linked to power generation. This indicates that the build-up of the innovation system has entered a critical phase that is decisive for a further thriving development of CCS. In order to move the CCS innovation system through this present difficult episode and deploy more advanced CCS concepts at a larger scale; it is necessary to direct policy initiatives at the identified weak system functions, i.e. entrepreneurial activity, market creation and the mobilization of resources. Moreover, in some specific countries it is needed to provide more regulatory guidance and improve the legitimacy for the technology. We discuss how policy makers and technology managers can use these insights to develop a coherent policy strategy that would accelerate the deployment of CCS.     

A study of the extraction of vanadium and nickel in oil-fired fly ash

Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium.     

中国环境规划学科发展：现状与展望

为厘清我国环境规划学科发展脉络,明确未来发展方向及重点,本文采用文献计量、机构调研、专家咨询等定量和定性分析方法,从环境规划思想与理论、技术实践、人才培养三个方面剖析了我国环境规划学科的发展特点、存在问题及未来趋势。结果表明,当前我国环境规划学科存在基础理论体系不完善,关键技术研究水平和应用能力有待提升,人才培养体系不完善等问题。基于此,本文提出了该学科未来发展对策：①紧握时代脉搏,拓展环境规划思想与理论研究;②立足问题导向,推动环境规划技术发展;③完善学科专业人才培养体系,促进学科可持续发展。     

论大学生职业生涯教育的现状及其对策

目前,高校对开展大学生职业生涯教育的重要性尚未有足够认识,职业生涯教育和辅导的保障机制也还不够完善,高校课程、专业设置等还不能为职业生涯教育提供有效支持。因此,要不断建立、完善职业生涯教育和辅导体系,推动高校招生教育体制改革,完善大学生职业生涯教育配套机制,以提高高校人才培养质量,促进大学生就业质量和水平,推动高校健康发展。     

The availability of primary nickel from the market economy countries

The US Bureau of Mines has determined the potential availability of nickel from 36 deposits or districts in 16 market economy countries (MECs). More than 95% of production in MECs was analysed. The study indicates the quantity of nickel available in resources and potential annual production at net production costs and on a total cost basis with a 0% and a 10% discounted cash flow rate of return (DCFROR). The properties included in this study contain approximately 33 million tonnes of recoverable nickel. About 26 million tonnes of nickel is potentially recoverable from nickel laterite deposits, of which 4.5 million tonnes can be produced at $2.50/lb or less with a 0% DCFROR. Approximately 7 million tonnes of nickel is potentially recoverable from nickel sulphide deposits of which about 6.3 million tonnes could be produced at $2.50/lb or less at a 0% DCFROR. Sensitivity studies indicate that the total cost of producing nickel from laterite deposits is most sensitive to increases in energy costs, and that the total costs of producing nickel from sulphide deposits is most sensitive to increases in labour costs and by changes in byproduct revenues.     

页岩气采出水处理及回用现状分析

介绍了页岩气采出水的产排特征,国内页岩气采出水的处理及回用现状,并总结出3项采出水处理技术,即:回注、简单处理后回用及处理至SY/T 6596—2004《气田水回注方法》达标,进行回注,以采出水复配压裂液为主要污水。这3种处理方式可以处理页岩气采出水,为污水达到GB 8978—1996《污水综合排放标准》做技术储备,并降低采出水对土壤、地表水等可能造成的环境污染风险。     

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: A case for England

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.