Biodegradation of atrazine by Rhodococcus sp. BCH2 to N-isopropylammelide with subsequent assessment of toxicity of biodegraded metabolites

Atrazine is a persistent organic pollutant in the environment which affects not only terrestrial and aquatic biota but also human health. Since its removal from the environment is needed, atrazine biodegradation is achieved in the present study using the bacterium Rhodococcus sp. BCH2 isolated from soil, long-term treated with atrazine. The bacterium was capable of degrading about 75 % atrazine in liquid medium having pH 7 under aerobic and dark condition within 7 days. The degradation ability of the bacterium at various temperatures (20–60 °C), pH (range 3–11), carbon (glucose, fructose, sucrose, starch, lactose, and maltose), and nitrogen (ammonium molybdate, sodium nitrate, potassium nitrate, and urea) sources were studied for triumph optimum atrazine degradation. The results indicate that atrazine degradation at higher concentrations (100 ppm) was pH and temperature dependent. However, glucose and potassium nitrate were optimum carbon and nitrogen source, respectively. Atrazine biodegradation analysis was carried out by using high-performance thin-layer chromatography (HPTLC), Fourier transform infrared spectroscopy (FTIR), and liquid chromatography quadrupole time-of-flight (LC/Q-TOF-MS) techniques. LC/Q-TOF-MS analysis revealed formation of various intermediate metabolites including hydroxyatrazine, N-isopropylammelide, deisopropylhydroxyatrazine, deethylatrazine, deisopropylatrazine, and deisopropyldeethylatrazine which was helpful to propose biochemical degradation pathway of atrazine. Furthermore, the toxicological studies of atrazine and its biodegraded metabolites were executed on earthworm Eisenia foetida as a model organism with respect to enzymatic (SOD and Catalase) antioxidant defense mechanism and lipid peroxidation studies. These results suggest innocuous degradation of atrazine by Rhodococcus sp. BCH2 in nontoxic form. Therefore the Rhodococcus sp.BCH2 could prove a valuable source for the eco-friendly biodegradation of atrazine pesticide.     

Biodegradation of methyl red by Bacillus sp. strain UN2: decolorization capacity,metabolites characterization,and enzyme analysis

Azo dyes are recalcitrant and refractory pollutants that constitute a significant menace to the environment. The present study is focused on exploring the capability of Bacillus sp. strain UN2 for application in methyl red (MR) degradation. Effects of physicochemical parameters (pH of medium, temperature, initial concentration of dye, and composition of the medium) were studied in detail. The suitable pH and temperature range for MR degradation by strain UN2 were respectively 7.0–9.0 and 30–40 °C, and the optimal pH value and temperature were respectively 8.0 and 35 °C. Mg²⁺ and Mn²⁺ (1 mM) were found to significantly accelerate the MR removal rate, while the enhancement by either Fe³⁺ or Fe²⁺ was slight. Under the optimal degradation conditions, strain UN2 exhibited greater than 98 % degradation of the toxic azo dye MR (100 ppm) within 30 min. Analysis of samples from decolorized culture flasks confirmed biodegradation of MR into two prime metabolites: N,N′dimethyl-p-phenyle-nediamine and 2-aminobenzoic acid. A study of the enzymes responsible for the biodegradation of MR, in the control and cells obtained during (10 min) and after (30 min) degradation, showed a significant increase in the activities of azoreductase, laccase, and NADH-DCIP reductase. Furthermore, a phytotoxicity analysis demonstrated that the germination inhibition was almost eliminated for both the plants Triticum aestivum and Sorghum bicolor by MR metabolites at 100 mg/L concentration, yet the germination inhibition of parent dye was significant. Consequently, the high efficiency of MR degradation enables this strain to be a potential candidate for bioremediation of wastewater containing MR.     

Photoelectro-Fenton mineralization of phenol through optimization of ferrous regeneration

The degradation of phenol in acidic solution at pH 3 has been investigated under various photo- and electrochemical conditions. A laboratory-scale reactor on which were mounted net electrodes (RuO₂/IrO₂-coated Ti anodes (DSA) and stainless steel cathodes) and 254 nm UV lamps was established to effectively reduce ferric reagents. The experimental results of the photoelectron-chemical reaction suggested that the current efficiency of reducing ferric ion was improved by increasing the number of electrodes used, and the UV lamps were important to inducing the reduction of ferric carboxylates, which were the major intermediates that were formed upon a particular degree of phenol oxidation. Accordingly, the addition of an initial concentration of 400 ppm ferrous salt and 10,200 ppm hydrogen peroxide (in a continuous mode) resulted in the removal of over 92 % of TOC (initial phenol?=?2,000 ppm, TOC?=?1,532 ppm) by 4 h of the photoelectro-Fenton and the sequential 2 h of the photo-Fenton processes. HPLC was utilized to monitor the formation of aromatic and carboxylate byproducts, and revealed that the aid of photo irradiation eliminated most of the oxalate residue from the final solution, which would have contributed to the 25 % of the TOC that was inactive in the electrolytic system.     

Isolation and characterization of a newly isolated pyrene-degrading Acinetobacter strain USTB-X

The pryene-degradation bacterium strain USTB-X was newly isolated from the polycyclic aromatic hydrocarbon (PAH)-contaminated soil in Beijing Coking Plant, China. The strain was identified as Acinetobacter with respect to its 16S rDNA and morphological and physiological characteristics. The strain was Gram-negative, non-mobile, non-acid-fast, and non-spore-forming, short rods in young culture and 0.8–1.6 μm in diameter and 1.2–2.5 μm long in the stationary phase of growth. Strain USTB-X could utilize pyrene, naphthalene, fluorene, phenanthrene, benzene, toluene, ethylbenzene, ethanol, methanol, and Tween 80 as sole source of carbon and energy. The strain could produce biosurfactants which enhanced the removal of pyrene and could remove 63 % of pyrene with an initial concentration of 100 mg·L^?1 in 16 days without other substrates. Based on the intermediates analyzed by gas chromatography-mass spectrometry, we also deduced the possible metabolic pathway of strain USTB-X for pyrene biodegradation. Results indicated that the strain USTB-X had high potential to enhance the removal of PAHs in contaminated sites.     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Uptake and degradation of trimethylamine by <Emphasis Type="Italic">Euphorbia milii</Emphasis>

Trimethylamine (TMA) is a volatile organic compound which causes not only unpleasant odor but also health concerns to humans. The average emission of TMA from food and fishery industries is 20.60 parts per billion (ppb) and emission from the gas exhausters is even higher which reaches 370 parts per million (ppm). In order to select the best plant TMA removal agent, in this study, 13 plants were exposed to 100 ppm of TMA and the remaining TMA concentration in their system was analyzed by gas chromatography (GC). Furthermore, plant metabolites from the selected plant were identified by gas chromatography-mass spectrometry (GC-MS). The result showed that Euphorbia milii was the most superior plant for TMA removal and could absorb up to 90 % of TMA within 12 h. E. milii absorbed TMA via leaf and stem with 55 and 45 % uptake efficiency, respectively. Based on its stomatal movement during the exposure to TMA, it was implied that the plant switched the photosynthetic mode from crassulacean acid metabolism (CAM)-cycling to CAM and CAM-idling. The switching of photosynthetic mode might reduce the stomata role in TMA absorption. Fatty acids, alkanes, and fatty alcohols in the plant leaf wax were also found to contribute to TMA adsorption. Leaf wax, stomata, and other leaf constituents contributed 58, 6, and 36 %, respectively, of the total TMA absorption by the leaf. The analysis and identification of plant metabolites confirmed that TMA was degraded and mineralized by E. milii.     

Xenobiotic benzotriazoles—biodegradation under meso- and oligotrophic conditions as well as denitrifying,sulfate-reducing,and anaerobic conditions

The intensive use of benzotriazoles as corrosion inhibitors for various applications and their application in dishwasher detergents result in an almost omnipresence of benzotriazole (BTri), 4-methyl- and 5-methyl-benzotriazole (4-TTri and 5-TTri, respectively) in aquatic systems. This study aims on the evaluation of the biodegradation potential of activated sludge communities (ASCs) toward the three benzotriazoles regarding aerobic, anoxic, and anaerobic conditions and different nutrients. ASCs were taken from three wastewater treatment plants with different technologies, namely, a membrane bioreactor (MBR-MH), a conventional activated sludge plant CAS-E (intermittent nitrification/denitrification), and CAS-M (two-stage activated sludge treatment) and used for inoculation of biodegradation setups. All ASCs eliminated up to 30 mg L^?1 5-TTri and BTri under aerobic conditions within 2–7 and 21–49 days, respectively, but not under anoxic or anaerobic conditions. 4-TTri was refractory at all conditions tested. Significant differences were observed for BTri biodegradation with non-acclimated ASCs from MBR-MH with 21 days, CAS-E with 41 days, and CAS-M with 49 days. Acclimated ASCs removed BTri within 7 days. Furthermore, different carbon and nitrogen concentrations revealed that nitrogen was implicitly required for biodegradation while carbon showed no such effect. The fastest biodegradation occurred for 5-TTri with no need for acclimatization, followed by BTri. BTri showed sludge-specific biodegradation patterns, but, after sludge acclimation, was removed with the same pattern, regardless of the sludge used. Under anaerobic conditions in the presence of different electron acceptors, none of the three compounds showed biological removal. Thus, presumably, aerobic biodegradation is the major removal mechanism in aquatic systems.     

Remediation of phenanthrene-contaminated soil by simultaneous persulfate chemical oxidation and biodegradation processes

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous compounds with carcinogenic and/or mutagenic potential. To address the limitations of individual remediation techniques and to achieve better PAH removal efficiencies, the combination of chemical and biological treatments can be used. The degradation of phenanthrene (chosen as a model of PAH) by persulfate in freshly contaminated soil microcosms was studied to assess its impact on the biodegradation process and on soil properties. Soil microcosms contaminated with 140 mg/kg_{DRY SOIL} of phenanthrene were treated with different persulfate (PS) concentrations 0.86–41.7 g/kg_{DRY SOIL} and incubated for 28 days. Analyses of phenanthrene and persulfate concentrations and soil pH were performed. Cultivable heterotrophic bacterial count was carried out after 28 days of treatment. Genetic diversity analysis of the soil microcosm bacterial community was performed by PCR amplification of bacterial 16S rDNA fragments followed by denaturing gradient gel electrophoresis (DGGE). The addition of PS in low concentrations could be an interesting biostimulatory strategy that managed to shorten the lag phase of the phenanthrene biological elimination, without negative effects on the physicochemical and biological soil properties, improving the remediation treatment.     

废水营养比对固定化藻菌去除污染物的影响及动力学研究

海藻酸钙作载体的固定化藻菌小球,经壳聚糖覆膜后,用于模拟废水的处理。通过研究废水初始氨氮浓度及碳氮比对固定化藻菌小球处理效果的影响,发现初始氨氮浓度为50 mg/L时,氨氮的去除率达最高值74.4%;碳氮比为35∶1时,COD去除率达最高值77.7%。系统最佳氮磷比与碳氮比分别为5∶1和35∶1。固定化藻菌降解有机物的动力学过程为一级不可逆生化反应过程,其降解速率常数约为0.099 h-1。     

Biodegradation of triazine herbicide metribuzin by the strain Bacillus sp. N1

By enrichment culturing of soil contaminated with metribuzin, a highly efficient metribuzin degrading bacterium, Bacillus sp. N1, was isolated. This strain grows using metribuzin at 5.0% (v/v) as the sole nitrogen source in a liquid medium. Optimal metribuzin degradation occurred at a temperature of 30ºC and at pH 7.0. With an initial concentration of 20 mg L^?1, the degradation rate was 73.5% in 120 h. If the initial concentrations were higher than 50 mg L^?1, the biodegradation rates decreased as the metribuzin concentrations increased. When the concentration was 100 mg L^?1, the degradation rate was only 45%. Degradation followed the pesticide degradation kinetic equation at initial concentrations between 5 mg L^?1 and 50 mg L^?1. When the metribuzin contaminated soil was mixed with strain N1 (with the concentration of metribuzin being 20 mg L^?1 and the inoculation rate of 10¹¹ g^?1 dry soil), the degradation rate of the metribuzin was 66.4% in 30 days, while the degradation rate of metribuzin was only 19.4% in the control soil without the strain N1. These results indicate that the strain N1 can significantly increase the degradation rate of metribuzin in contaminated soil.     

Atrazine removal in agricultural infiltrate by bioaugmented polyvinyl alcohol immobilized and free Agrobacterium radiobacter J14a: a sand column study

Bench-scale sand column breakthrough experiments were conducted to examine atrazine removal in agricultural infiltrate by Agrobacterium radiobacter J14a (J14a) immobilized in phosphorylated-polyvinyl alcohol compared to free J14a cells. The effects of cell loading and infiltration rate on atrazine degradation and the loss of J14a were investigated. Four sets of experiments, (i) tracers, (ii) immobilized dead cells, (iii) immobilized cells, and (iv) free cells, were performed. The atrazine biodegradation at the cell loadings of 300, 600, and 900 mg dry cells L(-1) and the infiltration rates of 1, 3, and 6 cm d(-1) were tested for 5 column pore volumes (PV). The atrazine breakthrough results indicated that the immobilized dead cells significantly retarded atrazine transport. The atrazine removal efficiencies at the infiltration rates of 1, 3, and 6 cm d(-1) were 100%, 80-97%, and 50-70%, respectively. Atrazine degradation capacity for the immobilized cells was not significantly different from the free cells. Both infiltration rate and cell loading significantly affected atrazine removal for both cell systems. The bacterial loss from the immobilized cell system was 10-100 times less than that from the free cell system. For long-term tests at 50 PV, the immobilized cell system provided consistent atrazine removal efficiency while the atrazine removal by the free cells declined gradually because of the cell loss.     

Micronucleus induction by oxidative metabolites of trichloroethylene in cultured human peripheral blood lymphocytes: a comparative genotoxicity study

The genotoxic effects of oxidative metabolites of trichloroethylene (TCE), namely chloral hydrate, trichloroacetic acid (TCA), dichloroacetic acid (DCA), and trichloroethanol (TCEOH) were examined in human peripheral blood lymphocytes. In this context, lymphocytes were exposed in vitro to 25, 50, and 100 μg/ml concentrations of these metabolites separately for a period of 48 h and examined for micronucleus (MN) induction through flow cytometer. At 50 μg/ml TCE metabolites, TCA (6.33?±?0.56 %), DCA (5.06?±?0.55), and TCEOH (4.70?±?1.73) induced highly significant (p?<?0.001) frequency of MN in comparison to control (1.03?±?0.40) suggestive of their genotoxic potential. However, exposure of 100 μg/ml of all the metabolites consistently declined the frequencies of MN which in some cases was equable to that of observed at 25 μg/ml. Further, cytotoxicity and cell cycle disturbances were also measured to find out the association of these endpoints with the MN induction. DNA content analysis revealed 3–4-fold elevation of S-phase at all the concentrations tested. Particularly, at 100 μg/ml, treatment elevation of S-phase was significantly (p?<?0.0001) higher as compared to the control. Present findings together with earlier reports indicate that TCE induces genotoxicity through its metabolites. Interaction of these metabolites with DNA, as evident by elevated S-phase, seems to be the major cause of MN induction. However, involvement of spindle disruption cannot be ruled out. This comparative study also suggests that after TCE exposure, the metabolic efficiency of human to generate oxidative metabolites determines the extent of genotoxicity.     

In vitro evaluation of the mutagenic and cytostatic effect of Tamaron,Lannate and Manzate alone and in mixture

Pesticides are often used in agriculture, especially in floriculture. They are frequently applied in binary or ternary mixtures. Nevertheless, their impact on the genetic material has been scarcely explored. In this study, the mutagenic and cytostatic effect of three widely used pesticides, alone and combined, were analyzed. Briefly, lymphocytes cultures were obtained from peripheral blood samples of five healthy donors to determine the sister chromatid exchange and the replicative index (RI). Then, lymphocytes were exposed to Tamaron (100 ppm), Lannate (200 ppm) and Manzate (300 ppm) alone and combined. For the binary mixtures, the concentrations used were 50 ppm of Tamaron, 100 ppm of Lannate and 150 ppm of Manzate. For the ternary mixtures the following concentrations were used: Tamaron (33 ppm), Lannate (70 ppm) and Manzate (100 ppm). Finally, differential staining was performed. It was found that the frequency of SCE/cell showed a significant difference (P ≤ 0.05) between the control (2.66) and the individual treatments of Tamaron (4.87), Lannate: (5.12) and Manzate (4.23). Also, the values of the SCE in the binary mixture of Tamaron+Lannate (5.57), Tamaron+Manzate (6.06) and Lannate+Manzate (6.22) and the ternary mixture (6.63) were statistically different compared to the control. In the RI there was a significant difference between the control (1.98) and the Manzate (1.87). RI differences were also statistically significant (P ≤ 0.05) in mixtures of Tamaron+Lannate (1.64), Tamaron+Manzate (1.63), Lannate+Manzate (1.69) and total mixture (1.53). Therefore, it is suggested that these pesticides alone and in mixtures have both mutagenic and cytostatic synergistic effect in human lymphocytes in vitro.     

An investigation of anthraquinone dye biodegradation by immobilized Aspergillus flavus in fluidized bed bioreactor

Purpose

Biodegradation and biodecolorization of Drimarene blue K₂RL (anthraquinone) dye by a fungal isolate Aspergillus flavus SA2 was studied in lab-scale immobilized fluidized bed bioreactor (FBR) system.

Method

Fungus was immobilized on 0.2-mm sand particles. The reactor operation was carried out at room temperature and pH?5.0 in continuous flow mode with increasing concentrations (50, 100, 150, 200, 300, 500?mg?l^?1) of dye in simulated textile effluent on the 1st, 2nd, 5th, 8th, 11th, and 14th days. The reactors were run on fill, react, settle, and draw mode, with hydraulic retention time (HRT) of 24?C72?h. Total run time for reactor operation was 17?days.

Results

The average overall biological oxygen demand (BOD), chemical oxygen demand (COD), and color removal in the FBR system were up to 85.57%, 84.70%, and 71.3%, respectively, with 50-mg?l^?1 initial dye concentration and HRT of 24?h. Reductions in BOD and COD levels along with color removal proved that the mechanism of biodecolorization and biodegradation occurred simultaneously. HPLC and LC?CMS analysis identified phthalic acid, benzoic acid, 1, 4-dihydroxyanthraquinone, 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, and catechol as degradation products of Drimarene blue K₂RL dye. Phytotoxicity analysis of bioreactor treatments provided evidence for the production of less toxic metabolites in comparison to the parent dye.

Conclusion

The present fluidized bed bioreactor setup with indigenously isolated fungal strain in its immobilized form is efficiently able to convert the parent toxic dye into less toxic by-products.     

Using iron-loaded sepiolite obtained by adsorption as a catalyst in the electro-Fenton oxidation of Reactive Black 5

This study explores the possibility of using iron-loaded sepiolite, obtained by recovering iron from polluted water, as a catalyst in the electro-Fenton oxidation of organic pollutants in textile effluents. The removal of iron ions from aqueous solution by adsorption on sepiolite was studied in batch tests at iron concentrations between 100 and 1,000 ppm. Electro-Fenton experiments were carried out in an electrochemical cell with a working volume of 0.15 L, an air flow of 1 L/min, and 3 g of iron-loaded sepiolite. An electric field was applied using a boron-doped diamond anode and a graphite sheet cathode connected to a direct current power supply with a constant potential drop. Reactive Black 5 (100 mg/L) was selected as the model dye. The adsorption isotherms proved the ability of the used adsorbent. The removal of the iron ion by adsorption on sepiolite was in the range of 80–100 % for the studied concentration range. The Langmuir and Freundlich isotherms were found to be applicable in terms of the relatively high regression values. Iron-loaded sepiolite could be used as an effective heterogeneous catalyst for the degradation of organic dyes in the electro-Fenton process. Successive batch processes were performed at optimal working conditions (5 V and pH 2). The results indicate the suitability of the proposed combined process, adsorption to iron remediation followed by the application of the obtained iron-loaded sepiolite to the electro-Fenton technique, to oxidize polluted effluents.     

Biodegradation of phenanthrene in river sediment

The aerobic biodegradation potential of phenanthrene (a polycyclic aromatic hydrocarbon [PAH]) in river sediment was investigated in the laboratory. Biodegradation rate constants (k1) and half-lives (t1/2) for phenanthrene (5 microg/g) in sediment samples collected at five sites along the Keelung River in densely populated northern Taiwan ranged from 0.12 to 1.13 l/day and 0.61 to 5.78 day, respectively. Higher biodegradation rate constants were noted in the absence of sediment. Two of the sediment samples were capable of biodegrading phenanthrene at initial concentrations 5-100 microg/g; lower biodegradation rates occurred at higher concentrations. Optimal biodegradation conditions were determined as 30 degreesC and pH 7.0. Biodegradation was not significantly influenced by the addition of such carbon sources as acetate, pyruvate, and yeast extract, but was significantly influenced by the addition of ammonium, sulfate, and phosphate. Results show that anthracene, fluorene, and pyrene biodegradation was enhanced by the presence of phenanthrene, but that phenanthrene treatment did not induce benzo[a]pyrene biodegradation during a 12-day incubation period.     

固定化小球藻与活性污泥的共生系统处理含锌废水

研究固定化小球藻与活性污泥的共生系统对含锌废水中Zn2+的去除效果,分析菌藻状态、初始Zn2+浓度、pH、固定化菌藻小球投加量和菌藻体积比等5个因素对固定化菌藻共生系统去除Zn2+的影响。结果表明,固定化活性污泥、固定化小球藻和固定化菌藻对Zn2+的去除效果均优于悬浮小球藻,其中固定化菌藻对Zn2+的去除效果最好;废水中初始Zn2+浓度小于100 mg/L时,固定化菌藻系统对废水中Zn2+的去除率达到90.5%;固定化菌藻系统去除废水中Zn2+的最佳条件是:初始Zn2+浓度为80 mg/L,pH=7,固定化小球投加量为80 mL,菌藻体积比为1∶2。     

Tropical surface water quality studies: Implications for the aquatic fate of N-methyl carbamate pesticides

Water quality assessment was conducted on the Ruiru River, a tributary of an important tropical river system in Kenya, to determine baseline river conditions for studies on the aquatic fate of N-methyl carbamate (NMC) pesticides. Measurements were taken at the end of the long rainy season in early June 2013. Concentrations of copper (0.21–1.51 ppm), nitrates (2.28–4.89 ppm) and phosphates (0.01–0.50 ppm) were detected at higher values than in uncontaminated waters, and attributed to surface runoff from agricultural activity in the surrounding area. Concentrations of dissolved oxygen (8–10 ppm), ammonia (0.02–0.22 ppm) and phenols (0.19–0.83 ppm) were found to lie within normal ranges. The Ruiru River was found to be slightly basic (pH 7.08–7.70) with a temperature of 17.8–21.2°C. The half-life values for hydrolysis of three NMC pesticides (carbofuran, carbaryl and propoxur) used in the area were measured under laboratory conditions, revealing that rates of decay were influenced by the electronic nature of the NMCs. The hydrolysis half-lives at pH 9 and 18°C decreased in the order carbofuran (57.8 h) > propoxur (38.5 h) > carbaryl (19.3 h). In general, a decrease in the electron density of the NMC aromatic ring increases the acidity of the N-bound proton removed in the rate-limiting step of the hydrolysis mechanism. Our results are consistent with this prediction, and the most electron-poor NMC (carbaryl) hydrolyzed fastest, while the most electron-rich NMC (carbofuran) hydrolyzed slowest. Results from this study should provide baseline data for future studies on NMC pesticide chemical fate in the Ruiru River and similar tropical water systems.     

Direct spectral analysis and determination of high content of carcinogenic bromine in bread using UV pulsed laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) was applied for the detection of carcinogenic elements like bromine in four representative brands of loaf bread samples and the measured bromine concentrations were 352, 157, 451, and 311 ppm, using Br I (827.2 nm) atomic transition line as the finger print atomic transition. Our LIBS system is equipped with a pulsed laser of wavelength 266 nm with energy 25 mJ pulse^?1, 8 ns pulse duration, 20 Hz repetition rate, and a gated ICCD camera. The LIBS system was calibrated with the standards of known concentrations in the sample (bread) matrix and such plot is linear in 20–500 ppm range. The capability of our system in terms of limit of detection and relative accuracy with respect to the standard inductively coupled plasma mass spectrometry (ICPMS) technique was evaluated and these values were 5.09 ppm and 0.01–0.05, respectively, which ensures the applicability of our system for Br trace level detection, and LIBS results are in excellent agreement with that of ICPMS results.     

Treatment of Basic Red 29 dye solution using iron-aluminum electrode pairs by electrocoagulation and electro-Fenton methods

The aim of this study is the treatment of Basic Red 29 (BR29) dye solution using hybrid iron-aluminum electrodes by electrocoagulation and electro-Fenton methods. The effect of current density, initial pH, supporting electrolyte, H₂O₂, and initial dye concentration on dye removal efficiency was investigated, and the best experimental conditions were obtained. Time-coarse variation of UV-Vis spectra and toxicity and chemical oxygen demand (COD) removal were also examined at the best experimental conditions. Both systems were found very successful for the removal of BR29 dye. The removal efficiency of >95 % for BR29 dye solution was reached easily in a short time. At the best experimental conditions, for the initial BR29 concentration of 100 mg/L, >95 % BR29 dye and 71.43 % COD removal were obtained after 20 and 40 min of electrolysis, respectively. Additionally, toxicity results for electro-Fenton treatment of 100 mg/L BR29 were also very promising. According to the results obtained, although electro-Fenton is more effective, both systems can be used successfully to treat textile wastewater including dyes.