Evaluation of surrogate measures of cadmium, lead, and zinc bioavailability to Eisenia fetida

We evaluated weak-electrolyte (0.1 M Ca(NO3)2) soil extractions and ion-exchange membranes coated with a metal chelator as measures of Cd, Pb, and Zn bioavailability in spiked artificial soil by comparing their metal availability estimates to acute lethal toxicity in the earthworm Eisenia fetida. Ca(NO3)2 extractions were precisely related to toxicity in all toxicity tests, and enabled the development of time-independent LC50S (incipient lethal-levels, ILLs) calculated using exposure levels based on extraction data. ILLs with 95% CIs for the Cd, Pb, and Zn toxicity tests were 9.8 (9.4-10.3), 1.16 (1.11-1.22), and 6.33 (6.18-6.49) Ca(NO3)2-extractable mmol metal/kg soil, respectively. Mixture toxicity of Cd, Pb, and Zn, assessed using the toxic unit (TU) approach, was 1.35 TU, suggesting additivity. Chelating ion-exchange membrane uptake was variable, and not well related to toxicity. Weak-electrolyte extractions show promise as precise, inexpensive surrogate measures of Cd, Pb, and Zn bioavailability in soil.     

Assessing PAH and PCB emissions from the relocation of harbour sediments using equilibrium passive samplers

Large-scale dredging of contaminated sediments is taking place in the harbor of Oslo, Norway. The dredged sediment masses are transferred into a confined aquatic disposal facility (CAD) in a natural 70-m deep basin within the Oslofjord. Currently there is no established method to determine how much dissolved contaminants are released during relocation and deposition of these sediments. For this reason we tested the use of equilibrium passive samplers consisting of 55 microm thin polyoxymethylene (POM-55) for studying the release of freely dissolved and thus bioavailable PAHs and PCBs at the disposal site, and found this to be a suitable method. In order to use POM-55 for monitoring PCBs, it was necessary to measure their POM-55/water partition coefficients, which was also presented as part of this study. Elevated turbidity (average 4.1 mg l(-1)) was observed at one side of the basin where no natural sill exists. Analysis of POM-55 at this location before and after deposition revealed that there was an increase in freely dissolved concentrations (C(W,free)) during deposition by a factor 37.5 for PAHs and a factor of 2.9 for PCBs. In addition, during deposition phenanthrene-to-anthracene aqueous concentration ratios at this location (values of 3-4) were more similar to those of the deposited sediments (approximately 2) than to those of the CAD water prior to deposition (approximately 14). This was not observed for the other locations where a natural sill exists at approximately 30 m water depth. The POM-55 equilibrium passive samplers are here shown to be useful tools for measuring and understanding the dynamics involved in the release of dissolved contaminants during sediment relocation.     

Bioaccumulation and the soil factors affecting the uptake of arsenic in earthworm, Eisenia fetida

To better understand arsenic (As) bioaccumulation, a soil invertebrate species was exposed to 17 field soils contaminated with arsenic due to mining activity. Earthworms (Eisenia fetida) were kept in the soils for 70 days under laboratory conditions, as body burden increased and failed to reach equilibrium in all soils. After 70 days of exposure, XANES spectra determined that As was biotransformed to a highly reduced form. Uptake kinetics for As was calculated using one compartment model. Stepwise multiple regression suggested that sorbed As in soils are bioaccessible, and uptake is governed by soil properties (iron oxide, sulfate, and dissolved organic carbon) that control As mobility in soils. As in soil solution are highly related to uptake rate except four soils which had relatively high chloride or phosphate. The results imply that uptake of As is through As interaction with soil characteristics as well as direct from the soil solution. Internal validation showed that empirically derived regression equations can be used for predicting As uptake as a function of soil properties within the range of soil properties in the data set.     

The estimation of PAH bioavailability in contaminated sediments using hydroxypropyl-beta-cyclodextrin and Triton X-100 extraction techniques

A study was conducted to investigate whether cyclodextrins and surfactants can be used to predict polycyclic aromatic hydrocarbon (PAH) bioavailability in contaminated sediments. Two sediment samples were extracted with aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD) and Triton X-100. PAH removal during extraction was compared with PAH removal during biodegradation and solid-phase extraction. The latter two methods were used as reference methods to establish which part of the PAHs could be biodegraded and to what extent biodegradation was governed by bioavailability limitations. It was demonstrated that HPCD extraction followed solid-phase extraction and removed primarily readily bioavailable PAHs, while Triton X-100 extracted both readily and poorly bioavailable PAHs. Moreover, HPCD did not affect the degradation of PAHs in biodegradation experiments, while Triton X-100 enhanced the degradation of low molecular weight PAHs. It was concluded that HPCD extraction may provide a good method for the prediction of PAH bioavailability. Triton X-100 extraction is unfit for the prediction of PAH bioavailability.     

Effect of earthworms (Eisenia fetida) on the fractionation and bioavailability of rare earth elements in nine Chinese soils

The effect of earthworm (Eisenia fetida) activity on soil pH, dissolved organic carbon (DOC), fraction distribution pattern and bioavailability of rare earth elements (REEs) Y, La, Ce, Pr and Nd in nine Chinese soils were investigated using pot experiments. A three-step extraction procedure recommended by the European Community (Standards, Measurements and Testing Programme) was used to fractionate REEs in soils into water soluble, exchangeable and carbonate bound (B1), Fe- and Mn-oxides bound (B2) and organic matter and sulfide bound (B3). Inoculated with earthworms, the soil pH, DOC and water-soluble rare earth elements fraction increased. A significant correlation was obtained between the increased DOC and the increased water-soluble REEs. REEs in fraction B1 increased after earthworm inoculation, while those in fraction B3 decreased. No significant differences were observed for REEs in fraction B2. The biomass and the concentrations of REEs in wheat shoots and roots increased after the treatment with earthworms. The results demonstrated that earthworm activity increased the mobility and bioavailability of REEs in soils.     

Accumulation,speciation and localization of silver nanoparticles in the earthworm Eisenia fetida

Environmental Science and Pollution Research - The use of silver nanoparticles (AgNPs) in agriculture and many consumer products has led to a significant release of Ag in the environment. Although...     

Air concentrations of PCDD/Fs, PCBs and PCNs using active and passive air samplers

The concentrations of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) were determined in air samples collected at four sampling sites located in two zones of Barcelona (Spain): near a municipal solid waste incinerator (MSWI) and a combined cycle power plant (3 sites), and at a background/control site. Samples were collected using high-volume active samplers. Moreover, 4 PUF passive samplers were deployed at the same sampling points during three months. For PCDD/Fs, total WHO-TEQ values were 27.3 and 10.9 fg WHO-TEQm(-3) at the urban/industrial and the background sites, respectively. The sum of 7 PCB congeners and the Sigma PCN levels were also higher at the industrial site than at the background site. In order to compare active and passive sampling, the accumulated amounts of PCDD/Fs, PCBs and PCNs in the four passive air samplers, as well as the total toxic equivalents in each sampling site were also determined. To assess the use of PUF passive samplers as a complementary tool for PCDD/F, PCB and PCN monitoring, sampling rates were calculated in accordance with the theory of passive air samplers. PUF disks allowed establishing differences among zones for the POP levels, showing that they can be a suitable method to determine POP concentrations in air in areas with various potential emission sources. Although both particle and gas phase were sorbed by the PUFs, data of gas phase congeners are more reproducible.     

PAH dissipation in spiked soil: impacts of bioavailability, microbial activity, and trees

While trees have demonstrated potential in phytoremediation of several organic contaminants, little is known regarding their ability to impact the common soil contaminant PAHs. Several species of native North American trees were planted in soil artificially contaminated with three PAHs. Plant biomass, PAH dissipation, and microbial mineralization were monitored over the course of one year and environmental conditions were allowed to follow typical seasonal patterns. PAH dissipation and mineralization were not affected by planting. Extensive and rapid loss of PAHs was observed and attributed to high bioavailability and microbial activity in all treatments. The rate of this loss may have masked any significant planting effects. Anthracene was found to be more recalcitrant than pyrene or phenanthrene. Parallel soil aging studies indicated that sequestration to soil components was minimal. Contrary to common inferences in literature, amendment with decaying fine roots inhibited PAH degradation by the soil microbial community. Seasonal variation in environmental factors and rhizosphere dynamics may have also reduced or negated the effect of planting and should be taken into account in future phytoremediation trials. The unique root traits of trees may pose a challenge to traditional thought regarding PAH dissipation in the rhizosphere of plants.     

Comparing the nutrient changes,heavy metals,and genotoxicity assessment before and after vermicomposting of thermal fly ash using Eisenia fetida

Environmental Science and Pollution Research - Fly ash (FA) is available in an unstable state and can be ameliorated by vermicomposting. The different ratios of FA viz (FA10, FA15, FA20, FA25,...     

Determination of ozone in outdoor and indoor environments using nitrite-impregnated passive samplers followed by ion chromatography

An improved ion chromatographic (IC) method has been developed for the separation of nitrate in filter extracts in the presence of high concentrations of nitrite. This analytical method was successfully used for an indirect measurement of ozone (O3) in outdoor and indoor air, following its collection using a nitrite-impregnated passive sampler. The limit of detection and the limit of quantification, using the modified IC method, were 6 microg l(-1) (3sigma) and 20 microg l(-1) (10sigma), respectively. Improved detection limits and low baseline noise were obtained with the use of eluent generator and high-capacity ion exchange column. The optimized method was used for assessing O3 concentration in both indoor and outdoor environments of 28 child care centers (CCCs) located in different parts of Singapore. The O3 concentrations ranged from 0.1 to 11.95 parts per billion (ppb) in indoor and from 3.2 to 21.7 ppb in outdoor environments during the study period. It was found that, among the CCCs investigated in this study, air-conditioned CCCs and those located in close proximity to traffic emissions had significantly lower O3 concentrations indoors.     

PAHs and nitrated PAHs in air of five European countries determined using SPMDs as passive samplers

The gas phase polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs in the atmosphere of five European countries (Austria, the Czech Republic, Poland, Slovakia and Sweden) were measured simultaneously during two 21-day passive sampling campaigns using semipermeable membrane devices (SPMDs). SPMD samplers, consisting of a pair of SPMDs covered by a metal umbrella, were deployed at 40 locations ranging from remote and rural to urban and industrial, at a similar time during each of the two sampling campaigns (autumn 1999, except in Poland, winter 1999, and summer 2000). The total amounts of PAHs and nitro-PAHs found in the SPMDs ranged between 5.0–1.2×10³ and 1.1×10⁻³–4.0 ng SPMD⁻¹ day⁻¹, respectively. The measured environmental sampling conditions were similar between sites and, thus, the variations in the SPMD data reflected the spatial differences in gas phase concentrations of nitro-PAHs and PAHs within and between countries. The gas phase concentrations of nitro-PAHs and PAHs found in East Europe (Slovakia, the Czech Republic and Poland 1999) were 10 times higher than those measured in Sweden, Austria and Poland in 2000. In each country, the levels of PAHs and nitro-PAHs differed by one–three orders of magnitudes amongst sampling sites. The highest within-country spatial differences were found in Poland where levels of PAHs and nitro-PAHs were about one and two orders of magnitudes, respectively, higher in winter 1999 than in summer 2000, probably due to increasing emissions of coal combustion for residential heating. Differences in PAH-patterns between sites were visualized by the multivariate projection method, principal component analysis (PCA). However, no specific source patterns were found, probably since imissions rather than emissions were measured, so the PAHs detected at many sites originated from multiple sources.     

Molecular cloning, characterization of CAT, and eco-toxicological effects of dietary zinc oxide on antioxidant enzymes in Eisenia fetida

The full-length cDNA of catalase (EfCAT) from Eisenia fetida was cloned (GenBank accession no. JN617999). Sequence characterization revealed that EfCAT protein sequence contained proximal heme-ligand signature sequence (³⁵¹RLFSYSDTH³⁵⁹), two glycosylation sites (N₁₄₅ and N₄₃₆), the proximal active site signature (⁶¹FDRERIPERVVHAKGAGA⁷⁸), and 12 amino acids (N₁₄₅, H₁₉₁, F₁₉₅, S₁₉₈, R₂₀₀, N₂₁₀, Y₂₁₂, K₂₃₄, I₂₉₉, W₃₀₀, Q₃₀₂, and Y₃₅₅), which were identified as putative residues involved in NADPH binding. These conserved motifs and catalase signature sequences were essential for the structure and function of EfCAT. The present study also investigated the effect of the veterinary food additive zinc oxide on antioxidant processes in E. fetida, at different concentrations and exposure durations. A significant increase (by 106.0 % compared to controls) in CAT activity at 500 mg/kg was registered at day 15. The superoxide dismutase (SOD) activity at 500 mg/kg increased to the maximum value (by 44.0 %) measured at day 15. There was a significant increase in glutathione peroxidase (GPx) activity for all concentrations after 5 days. The results showed that dietary Zn (500 mg/kg) causes oxidative damage to earthworms. At early stages of earthworms exposed to ZnO, GPx is the main enzyme to impair the oxidative status; while at later stages the enzymes CAT and SOD were the main indicators of oxidative stress. The antioxidant enzymatic variations may be an adaptive response of earthworms to survive in contaminated soils.     

An uptake and elimination kinetics approach to assess the bioavailability of chromium,copper, and arsenic to earthworms (Eisenia andrei) in contaminated field soils

The aim of this study was to determine the bioavailability of metals in field soils contaminated with chromated copper arsenate (CCA) mixtures. The uptake and elimination kinetics of chromium, copper, and arsenic were assessed in the earthworm Eisenia andrei exposed to soils from a gradient of CCA wood preservative contamination near Hartola, Finland. In soils contaminated with 1480–1590 mg Cr/kg dry soil, 642–791 mg Cu/kg dry soil, and 850–2810 mg Ag/kg dry soil, uptake and elimination kinetics patterns were similar for Cr and Cu. Both metals were rapidly taken up and rapidly excreted by Eisenia andrei with equilibrium reached within 1 day. The metalloid As, however, showed very slow uptake and elimination in the earthworms and body concentrations did not reach equilibrium within 21 days. Bioaccumulation factors (BAF) were low for Cu and Cr (< 0.1), but high for As at 0.54–1.8. The potential risk of CCA exposure for the terrestrial ecosystem therefore is mainly due to As.

     

Avoidance behaviour of Eisenia fetida to carbofuran, chlorpyrifos, mancozeb and metamidophos in natural soils from the highlands of Colombia

Earthworm avoidance behaviour test is an important screening tool in soil eco-toxicology. This test has been developed and validated under North American and European conditions. However, little research has been performed on the avoidance test in the tropics. This work demonstrates the potential suitability of the avoidance behaviour test as screening method in the highlands of Colombia using Eisenia fetida as the bio-indicator species on contaminated soils with carbofuran and chlorpyrifos. Though for the two active ingredients 100% avoidance was not reached, a curve with six meaningful concentrations is provided. No significant avoidance behaviour trend was found for mancozeb and methamidophos. Tests were conducted in the field yielded similar results to the tests carried out in the laboratory for chlorpyrifos and mancozeb. However, for the case of carbofuran and methamidophos, differences of more than double in avoidance were obtained. Divergence might be explained by soil and temperature conditions.     

Depleted N carryover, leaching and uptake for three years of irrigated corn

Deep percolation of nitrate can contribute to the deterioration of groundwater resources. Leaching of nitrate is a complex process affected by fertilizer and irrigation practices, efficiency of N use by the crop, and how the soil's water holding capacity and water transmission properties are affected by soil texture. Depleted (¹⁵NH₄)₂SO₄ fertilizer at N rates of 0, 125, 250 and 375 kg ha⁻¹ was applied annually for 3 years to continuous corn grown within three different water regimes. This time period and the labeled N permitted an evaluation of N use efficiency by the crop and NO₃ leaching and carryover on a Weld silty clay loam, a fine-textured soil, typical of the “hardland” soils of the semi-arid Great Plains. Three water regimes, W₁ ( 1.5 ET), W₂ ( ET) and W₃ ( 0.8 ET), were used. Beneath each plot within each water regime, Duke-Haise vacuum trough extractors were installed under undisturbed soil profiles at 1.22-m depth to measure weekly percolate and the NO₃ concentration in the percolate. The corn was harvested in the fall in the dent stage to measure the total above-ground biomass N uptake. Soil profiles (1.8 m) were sampled annually in the fall after crop harvest to determine NO₃---N in the soil or carryover.Great variability was encountered in measuring the amount of extractor water and its NO₃ content under each water regime, which made estimates of N03 leaching losses unreliable. Also, the variability demonstrates formidable problems in quantifying percolation losses with vacuum trough extractors under undisturbed fine-textured soil profiles. With the highest N rate of 376 kg ha⁻¹ yr⁻¹ and within the water regime W₁, where leaching was expected to be greatest, only 1% of the cumulative labeled N applied was found in extractor waters and most movement of the labeled N into extractors occurred the third year. The 125-kg-ha⁻¹ yr⁻¹ fertilizer N rate significantly increased the crop yield over the unfertilized plots without increasing residual NO₃---N accumulation; whereas fertilizer N rates of > 125 kg ha⁻¹ yr⁻¹ did not appreciably increase plant yields over the 125-kg-ha⁻¹-N rate, but did appreciably increase residual NO₃.     

Application of passive sorbent tube and canister samplers for volatile organic compounds at refinery fenceline locations in Whiting,Indiana

Select volatile organic compounds (VOCs) in ambient air were measured at four fenceline sites at a petroleum refinery in Whiting, IN, using modified EPA Method 325 A/B with passive tubes and EPA Compendium Method TO-15 with canister samplers. One-week, time-integrated samplers were deployed for 8 weeks with tubes and canister samplers deployed in duplicate. Good precision was obtained from the duplicate tubes (<7%) and duplicate canisters (≤10%) for BTEX, perchloroethylene, and styrene. The tubes yielded statistically significantly higher concentrations than canisters for benzene, toluene, ethylbenzene, and m,p-xylene. However, all differences were estimated to be <0.1 ppbv. No concentration differences among the four Whiting sites were found for any of the VOCs.

Implications: Recently enacted EPA Methods 325A/B use passive-diffusive tube samplers to measure benzene at refinery fenceline locations. This pilot study presents VOC data applying a modified version of EPA Method 325 A/B and its comparison to EPA Compendium Method TO-15 canister samplers at four refinery fenceline sites. The findings from this study provide additional confidence in application of the tube method at refineries to ascertain VOC source influence since tube and canister samplers were comparable and good precision was obtained from duplicate sampling for both methods. No overall difference in these reported VOC concentrations was found between Whiting sites for tubes or canisters.     

Field method comparison between passive air samplers and continuous monitors for Vocs and NO2 in El Paso, Texas

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO2) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO2 and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (< 5% relative standard deviation, RSD) were found for NO2 measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (> or = 77% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO2 samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs. However, except for toluene, OVM BTEX measurements generally exceeded their continuous counterparts with a mean bias of 5-10%. Although interpretation of the study results was limited due to small sample sizes, diffusion barrier influences caused by shelters that housed OVMs and differences in sampling heights between OVMs and auto-GC inlet may explain the overestimation.     

Measurement of BTEX (benzene,toluene, ethybenzene,and xylene) levels at urban and semirural areas of Algiers City using passive air samplers

The study presents the levels of air pollution by aromatic organic compounds BTEX (benzene, toluene, ethylbenzene, o-, m-, and p-xylenes) in the city of Algiers. The sampling was carried out using Radiello passive sampler. Three sampling campaigns were carried out in roadside, tunnel, urban background, and semirural sites in Algiers. In order to determine the diurnal mean levels of air pollution by BTEX to which people are exposed, a modified passive sampler was used for the first time. In addition, monitoring of pollution inside vehicles was also made. In the spring of 2009, more than 27 samplings were carried out. In the background and road traffic sites the Radiello sampler was exposed for 7 days, whereas the time exposure was reduced to 1 day in the case of the vehicle as well as the tunnel. The results indicate that average benzene concentrations in the roadside and inside vehicle exceed largely the limit value of 5 μg m^?3 established by the European Community (EC). On the other hand, it has been noticed that the concentration levels of other BTEX are relatively high. Also, in order to identify the origin of emission sources, ratios and correlations between the BTEX species have been highlighted. This study shows that road traffic remains the main source of many local emission in Algiers.

Implications The vehicle fleet in Algeria is growing rapidly since the 1990s following economic growth and is responsible for the increasing air pollution in large cities. Because there are no data collection of BTEX carried out by national air quality network, all environmental and transportation policies are based on European emissions standards, but national emission standards are currently not in place. This work will contribute to the analysis of real emissions of BTEX in Algiers, for the development of management and for assessment of population exposure variation depending on the location in the city of Algiers.     

Evaluation of atmospheric sources of PCDD/Fs, PCBs and PBDEs around a steel industrial complex in northeast China using passive air samplers

The concern about emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) from steel industrial parks has increased in the past decades. In this study, polyurethane foam (PUF)-disk based passive air samples were collected in and around a big steel industrial park of Anshan, Northeast China from June 2008 to March 2009. The levels, seasonal variations and potential sources of PCDD/Fs, PCBs and PBDEs in the atmosphere around the steel industrial complex were investigated, and potential contribution of these three groups of persistent organic pollutants (POPs) from iron and steel production was also assessed. The air concentrations of ∑₁₇PCDD/Fs (summer: 0.02-2.77 pg m⁻³; winter: 0.20-9.79 pg m⁻³), ∑₁₉PCBs (summer: 23.5-155.8 pg m⁻³; winter: 14.6-81.3 pg m⁻³) and ∑₁₃PBDEs (summer: 2.91-10.7 pg m⁻³; winter: 1.10-3.89 pg m⁻³) in this targeted industrial park were relatively low in comparison to other studies, which implied that the industrial activities of iron and steel had not resulted in serious contamination to the ambient air in this area. On the whole, the air concentrations of PCDD/Fs in winter were higher than those of summer, whereas the concentrations of PCBs and PBDEs showed opposite trends. The result from principal component analysis indicated that coal combustion might be the main contributor of PCDD/F sources in this area.