Environmental sustainability of textiles and apparel: A review of evaluation methods

Environmental sustainability, which considers the tradeoff between economic productivity and environmental impact, is an important perspective in product decisions for textiles and apparel companies. Evaluating environmental sustainability for textile products has been difficult because of the complexity in the production and consumption processes. This paper provides a review of the methods that can be potentially used for measurement of environmental sustainability. These methods include the life cycle assessment, environmental footprint, eco-efficiency and Higg index. This paper reviewed the methodologies of these approaches and discussed about their limitations against the unique context of the textiles and apparel industry. We proposed a couple of directions where future research should be focused on, which may lead to ultimate solutions.     

Volatile Organic Compounds: Sampling Methods and Their Worldwide Profile in Ambient Air

The atmosphere is a particularly difficult analytical system because of the very low levels of substances to be analysed, sharp variations in pollutant levels with time and location, differences in wind, temperature and humidity. This makes the selection of an efficient sampling technique for air analysis a key step to reliable results. Generally, methods for volatile organic compounds sampling include collection of the whole air or preconcentration of samples on adsorbents. All the methods vary from each other according to the sampling technique, type of sorbent, method of extraction and identification technique. In this review paper we discuss various important aspects for sampling of volatile organic compounds by the widely used and advanced sampling methods. Characteristics of various adsorbents used for VOCs sampling are also described. Furthermore, this paper makes an effort to comprehensively review the concentration levels of volatile organic compounds along with the methodology used for analysis, in major cities of the world.     

基于深度学习技术的藻类智能监测系统开发

浮游藻类对水环境的变化非常敏感,是评价水环境质量的重要指示生物.传统的浮游藻类监测依靠人工采样分析,需要专业检测人员使用显微镜对藻细胞逐一鉴定并计数,耗时耗力且严重依赖检测人员的专业知识与鉴定经验,限制了浮游藻类监测工作的标准化推广和普及应用.利用神经网络模型建立了一套浮游藻类智能监测系统,该系统能够实现浮游藻类检测的...     

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

Advances in polymerase chain reaction (PCR) have permitted accurate, rapid and quantitative identification of microorganisms in pure cultures regardless of viability or culturability. In this study, a simple sample processing method was investigated for rapid identification and quantification of fungal spores from dust samples using both conventional and real-time PCR. The proposed method was evaluated for susceptibility to interference from environmental dust samples. Stachybotrys chartarum and Aspergillus fumigatus were used as test organisms. The sensitivity of detection in pure culture was 0.1 spore DNA equivalents per PCR reaction corresponding to 20 spores ml(-1) in the sample. However, 1 spore DNA equivalent per PCR reaction corresponding to 200 spores ml(-1) in the sample was the lowest amount of spores tested without interference in dust samples spiked with spores of either fungal species. The extent of inhibition was calculated using conventional and real-time PCR reactions containing fungal spores, specific primers, specific probes (for real-time PCR) and various amounts of dust. The results indicate that the extent of inhibition by dust on PCR varies with the type and amount of dust, and number of spores. No interference in the analysis of spiked samples was detected from 0.2 mg ml(-1) of four real-life dust samples at p-value >0.05 using 2 x 10(4) spores for conventional PCR and 2 x 10(5) spores for real-time PCR. However, samples containing >0.2 mg ml(-1) real-life dust compromised the PCR assay. These results suggest the potential usefulness of a simple sample processing method in conjunction with PCR for monitoring the fungal content of aerosols collected from indoor environments.     

固相微萃取技术及其在环境监测中的应用

介绍了90年代初推出的一种新的样品前处理技术－固相微萃取技术。它与传统的萃取法相比具有分析周期短、简捷、灵敏度高,无须使用溶剂,适于现场监测等优点,目前已成功地用于各基质样品如：土壤、水、大气中环境污染物的分析。文章还对其基本原理、固相涂层、操作模式展开了讨论。经分析认为该技术有着广阔的推广和应用前景。     

Bioaerosol characterization by flow cytometry with fluorochrome

Traditional culture and microscopy methods for evaluation of bioaerosols are slow, tedious, and rather imprecise. In this study, the application of flow cytometry that was combined with a fluorescent technique (FCM/FL) was evaluated as a technique to quickly and accurately determine and quantify the total concentration and viability of bioaerosols. The optimal conditions of five fluorescent dyes [acridine orange (AO), SYTO-13, propidium iodide (PI), YOPRO-1, and 5-cyano-2,3-ditolytetrazolium chloride (CTC)] used in FCM/FL were determined for laboratory samples of bacterial aerosols (Escherichia coli, and endospores of Bacillus subtilis) and fungal aerosols (Candida famata and Penicillium citrinum spores). Based on the measured cell concentration, fluorescence intensity, and staining efficiency as indicators for dye performance evaluation, SYTO-13 was found to be the most suitable fluorescent dye for determining the total concentration of the bioaerosols, as well as YOPRO-1 was the most suitable for determining viability. Moreover, the established optimal FCM/FL with dyes was validated for characterizing microorganism profiles from both air and water samples from the aeration tank of hospital wastewater treatment plant. In conclusion, the FCM/FL successfully assessed the total concentration and viability for bacterial and fungal microorganisms in environmental field samples.     

Application of Defined Co-Immobilized Microbial Consortium as a Ready-to-Use Seed Inoculum in Bod Analysis

A number of microorganisms were isolated from sewage. Biochemical Oxygen Demand (BOD-5 day) analysis was carried out by individual pure cultures. The cultures giving higher or equal BOD values as compared to reference GGA solution were selected for the formulation of a defined mixed microbial consortium. This microbial consortium was co-immobilized on calcium-alginate beads. Four synthetic and six industrial samples were tested for BOD by using immobilized beads as well as sewage as source of seeding materials. BOD values obtained with beads for all the synthetic as well as industrial samples were fairly comparable with those obtained with sewage. Reusability of prepared microbial beads was also checked with different synthetic and industrial samples and was compared with reference GGA solution. The same microbial beads can be reused three times for different BOD-5 day estimations. It is recommended that immobilized microbial beads can be used as a ready-to-use seeding material for BOD analysis.     

Occurrence of potential bacterial pathogens in coastal areas of the Adriatic Sea

A monitoring program was carried out in bathing waters along the sea-coast of the Adriatic Sea. The investigation was aimedat obtaining a quali-quantitative picture of microorganisms ofanthropic origin and of a more strictly autochthonous origin and at verifying the existence of possible reciprocal correlations and combinations of relationship between them. Results showed that the concentrations of indicators of faecal contamination, whether within or over the values established by legislation, are not always related to the presence and density of microorganisms of environmental origin but the regression modelsused can help to describe how these latter microorganisms can bein relation to levels of the other parameters. The difficultyis evident of the predictability of health effects swimming-associated; for this reason more complex models that are currently used should be taken into account for minimising the risk for bathers.     

三峡库区不同沉积土微生物多样性分析

三峡库区微生物的变化影响淡水生态系统功能的发挥及人类健康,为探究三峡库区万州段不同沉积土微生物群落的多样性,于2018年3月对万州二桥两岸不同土样进行微生物调查,采用烘干法和重铬酸钾容量法对沉积土理化性质进行分析,采用平板稀释涂布法分析可培养微生物的数量,使用16S rDNA基因测序和构建系统进化树对沉积土微生物的群落...     

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.     

江苏省太湖流域大型底栖无脊椎动物完整性业务化评价指数构建

为支撑流域水生态目标的业务化管理,提高水生态监测和评价的可操作性,突破物种分类鉴定的技术瓶颈,以大型底栖无脊椎动物为研究对象,在江苏省太湖流域布设120个采样点,于2013年1—3月、7—8月和10—11月开展3次监测。以最小干扰为参照状态,对涉及物种丰度、物种多度组成、耐污能力和摄食类群的72个候选指数进行分布范围、判别能力及相关性分析,结合指数获取的便利性及物种分类的难易程度,最终筛选出3个核心指数构成大型底栖无脊椎动物完整性业务化评价指数,其中湖荡、河流和水库的指数为软体动物分类单元数、优势分类单元相对多度和BMWP指数,溪流的指数为ETO分类单元数、前三位优势分类单元相对多度和BMWP指数。经验证,业务化指数与环境梯度有较好的响应关系,且可操作性强,具备开展业务化应用的前景。但目前的流域水生态目标管理尚处于摸索阶段,技术体系还须在业务化过程中不断修正和完善。     

Biological treatment of textile wastewater using sequencing batch reactor technology

This study was conducted to biologically treat wastewater discharged from the textile industry (textiles made of cotton and/or synthetic fiber) using sequencing batch reactor (SBR) technology (activated sludge process operating on batch mode). To achieve the objectives of the study, the characteristics of textile wastewater and the biodegradation of its organic constituents under unsteady state conditions were studied. Then, a bench-scale pilot plant was used to study the performance of SBR by monitoring the settleability and change in the constituents (chemical oxygen demand and solids) over time. Results of the study showed that textile wastewater has different types of pollutants: heat, basicity, suspended solids, organic and inorganic matter, and heavy metals. The factors affecting the biodegradation of organic matter were determined as the reaction time and the ratio of initial substrate to sludge concentrations. Also, removal of solids was monitored, and the settling velocity as affected by sludge concentration was graphically presented to enable the determination of settling time. Finally, the outcome of this study was used to suggest a procedure for the design of a full-scale SBR unit for treatment of textile wastewater.     

Biological reduction of perchlorate in ion exchange regenerant solutions containing high salinity and ammonium levels

The most promising technologies to remove perchlorate from water are ion exchange and biological reduction. Although successful, ion exchange only separates perchlorate from water; it does not eliminate it from the environment. The waste streams from these systems contain the caustic or saline regenerant solutions used in the process as well as high levels of perchlorate. Biological reduction could be used to treat the regenerant waste solutions from the ion exchange process. A treatment scheme, combining ion exchange and biodegradation, is proposed to completely remove perchlorate from the environment. Perchlorate-laden resins generate brines containing salt concentrations up to 6% or caustic solutions containing up to 0.5% ammonium. Both, high salt and ammonium hydroxide concentrations are potentially toxic to microorganisms. Therefore, the challenge of the proposed system is to find perchlorate reducing microorganisms that are effective under such stressful conditions. Preliminary results have shown that salt concentrations as low as 0.5% reduced the perchlorate biodegradation rate by 30%; salt concentrations greater than 1% decreased this rate to 40%. Although biodegradation was seen in ammonium levels of 0.4%, 0.6% and 1%, the perchlorate biodegradation rate was 90% of that at 0% ammonium hydroxide. Further research will focus on the isolation and/or acclimation of microorganisms that are able to biodegrade perchlorate under these stressful conditions.     

Distribution of microbiological indicators of fecal pollution in the riverine substrates

Distribution of fecal microorganisms in water, periphyton, and sediment was studied along the ?rnovnica river (Croatia) over a 1.5-year period. It was found that periphyton was inhabited by the highest number of investigated bacteria, while lower numbers of them were found in sediment and the lowest in surface water of the river. The concentrations of fecal microorganisms in periphyton and partly in sediment were found to be significantly higher in the middle of the river course, near the town of ?rnovnica, while according to the analysis of surface water the highest degree of pollution was reached on its estuary. The results were explained with respect to bacterial?Calgal associations. Considering the fact that most of the river microorganisms are associated with periphyton and sediment particles and only a small number of them is in the free-living form, microbiological analysis of both periphyton and sediment together with water samples has been suggested when fecal pollution of a river is concerned.     

Workplace monitoring for volatile organic compounds using thermal desorption-gas chromatography-mass spectrometry

The interest in the identification of volatile organic compounds in the workplace has been a major focus of many National Institute for Occupational Safety and Health (NIOSH) field studies. A primary technique for sampling and analysis of these compounds is summarized by NIOSH Manual of Analytical Methods (NMAM) 2549. This is a screening method that uses a multi-bed sorbent to trap a wide variety of compounds and compound classes. Thermal desorption techniques are used as a first attempt to characterize potential contaminants in a workplace and to determine what future sampling and analyses must be performed. Field examples are provided to show the versatility of thermal desorption methods and techniques. Due to their sensitivity, thermal desorption tube methods are sometimes required in order to measure the workplace concentrations of unusual compounds. In other situations, the exposures are too high or varied to make thermal desorption tubes practical. In these cases, the identification of contaminants with thermal desorption tubes leads to new method developments for the quantification of specific compounds using more conventional solid sorbent-solvent desorption based methods.     

流域重点工业污染源识别特征成分谱建立技术

研究了基于生产排放全过程、多相、多类污染物并举的污染源识别特征成分谱建立技术。首先建立污染源排放完整图谱,包括原辅料、中间物质、产品、各工艺废水污染物、水处理设施进口和出口污染物等。然后从排放完整图谱中解析出特征污染物。对于废水中的常规污染物和金属污染物,采用与受纳水体浓度相比较的方式得到污染源识别特征污染物,建议将浓度超过受纳水体1倍的污染物定为特征污染物。对于有机污染物,将质量分数之和大于90%的污染物集定为特征有机污染物,并按照有机物类别进行分类。最后开发建立动态的水污染源排放数据库。应用该技术建立了石化行业典型企业的排放特征成分谱,发现这些特征组分具有很好的代表性,为水污染源的识别提供了基础数据。     

Continuous flow methods for evaluating the response of a copper ion selective electrode to total and free copper in seawater

This work describes the development of an instrument for measuring free and total copper in seawater by continuous flow analysis (CFA) with an Orion copper (II) ion selective electrode (CuISE). Sample analysis times are reduced considerably by using an extrapolation technique based on the fitting of an empirical mathematical expression to the electrode time-response curve enabling a prediction of the final equilibrium potential. CuISE measurements in seawater samples containing nanomolar levels of total copper can be very time consuming, and this predictive approach significantly reduces sample analysis time, and improves sample throughput. The time taken to measure pCu in seawater to a precision of +/- 0.1, using conventional potentiometry, varies considerably depending on the condition of the electrode membrane but can be reduced by a factor of 3-6 (typically from 60 to 10 min) by using the extrapolation technique in conjunction with CFA. Details are given of the protocols used for preconditioning the CuISE. The system can be used as a portable instrument for field measurements or for shipboard measurements of free copper in seawater. Extrapolated equilibrium potentials are within +/- 0.5 mV of true steady state values.     

Soil application of dinitroaniline and arylphenoxy propionic herbicides influences the activities of phosphate-solubilizing microorganisms in soil

An experiment was conducted under laboratory conditions to investigate the effect of two systemic herbicides, viz. pendimethalin (a dinitroaniline) and quizalofop (an arylphenoxy propionic acid) at their recommended field application rates (1.0?kg and 50?g active ingredient per hectare, respectively), either separately or in a combination, on growth and activities of phosphate-solubilizing microorganisms in relation to their effects on biochemical transformations and availability of organic carbon, total and available phosphorus in a Typic Haplustept soil of West Bengal, India. Application of herbicides, in general, significantly stimulated the growth and activities of phosphate-solubilizing microorganisms which increased microbial biomass resulting in higher accumulation of oxidizable organic carbon, total and available phosphorus in soil as compared to untreated control. The combined application of both the herbicides highly stimulated the proliferations of phosphate-solubilizing microorganisms, while pendimethalin alone significantly accentuated phosphate-solubilizing capacities 36.4% as compared to untreated control and retained highest amount of total phosphorus due to greater microbial activities in soil. The separate application of quizalofop also manifested an induced effect on the proliferations of phosphate-solubilizing microorganisms and accounted significant amounts of organic carbon and available phosphorus in the soil system. The results of the present study thus indicated that the cited herbicides at their field application rates can be safely used to eradicate weeds in the crop fields.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

Monitoring of Cr, Cu, Pb, V and Zn in polluted soils by laser induced breakdown spectroscopy (LIBS)

Laser Induced Breakdown Spectroscopy (LIBS) is a fast and multi-elemental analytical technique particularly suitable for the qualitative and quantitative analysis of heavy metals in solid samples, including environmental ones. Although LIBS is often recognised in the literature as a well-established analytical technique, results about quantitative analysis of elements in chemically complex matrices such as soils are quite contrasting. In this work, soil samples of various origins have been analyzed by LIBS and data compared to those obtained by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The emission intensities of one selected line for each of the five analytes (i.e., Cr, Cu, Pb, V, and Zn) were normalized to the background signal, and plotted as a function of the concentration values previously determined by ICP-OES. Data showed a good linearity for all calibration lines drawn, and the correlation between ICP-OES and LIBS was confirmed by the satisfactory agreement obtained between the corresponding values. Consequently, LIBS method can be used at least for metal monitoring in soils. In this respect, a simple method for the estimation of the soil pollution degree by heavy metals, based on the determination of an anthropogenic index, was proposed and determined for Cr and Zn.