Formation of polychlorinated diphenyl ethers from condensation of chlorophenols with chlorobenzenes

BACKGROUND AND AIMS: Polychlorinated diphenyl ethers (PCDEs), which are among the members of persistent organic pollutants, and PCDEs have been determined in a number of environmental samples. The main possible sources are the technical production of chlorinated phenols and all processes of incomplete combustion. PCDEs were observed in the fly ash from a municipal waste incinerator (MWI). It was speculated that the condensation of chlorophenols with chlorobenzenes occurred via PCDEs to form polychlorinated dibenzofurans (PCDFs). Nevertheless, PCDEs formation from condensation of chlorophenols with chlorobenzenes has not been confirmed by experimental observation. The objective of this paper is to investigate the formation mechanism of PCDEs from the condensation of chlorophenols with chlorobenzenes. The results are expected to be helpful in understanding the formation of PCDEs and in controlling and abating PCDEs emissions from MWI. METHODS: The pyrolysis of pentachlorophenol (PCP) and/or polychlorobenzenes (PCBz) was carried out in a sealed glass tube. The reaction products were extracted and purified with K2CO3 solution. The samples were concentrated and then cleaned up on an alumina column. GC/MS was used for identification and quantification of reaction products. RESULTS AND DISCUSSION: The results showed that the pyrolysis of hexachlorobenzene (HCB) at 340 degrees C for 6 h led to the formation of decachlorodiphenyl ether (DCDE) (2.41 microg/mg) and octachlorodibenzo-p-dioxins (OCDD) (0.24 micropg/mg), while the pyrolysis of PCP yielded DCDE (13.08 microg/mg) and OCDD (180.13 microg/mg). In addition, the amount of DCDE formation from the pyrolysis of the mixture of PCP and HCB was 4.65 times higher than the total amount of DCDE formation from the pyrolysis of HCB and PCP, respectively. This indicated that PCP and HCB were prone to condensation and formation of DCDE. DCDE was the main congener of PCDEs from condensation of PCP with HCB at 340, 400 and 450 degrees C. A small amount of nonachlorodiphenyl ether (NCDE) was formed by dechlorination reaction at 450 degrees C. The condensation of PCP with 1,2,4,5-tetrachlorobenzene (Cl4Bz) formed 2,2',3,4,4',5,5',6-octachlorodiphenyl ether (OCDE). Small amounts of heptachlorodiphenyl ether (HpCDE) and hexachlorodiphenyl ether (HxCDE) were detected at 450 degrees C. Meanwhile, polychlorinated dibenzo-p-dioxins (PCDDs) and PCDFs were detected from the condensation of PCP and PCBz. CONCLUSIONS: Experimental studies clarified the behavior of the formation of PCDEs from condensation of polychlorophenols and PCBz. The condensation of polychlorophenols with PCBz formed PCDEs through elimination of HCl between polychlorophenols and PCBz molecules. Another pathway of PCDEs formation was elimination of H2O between two polychlorophenol molecules. In addition, dechlorination processes had caused the specific homologous pattern of PCDEs under higher temperatures.     

Synthesis of [14C]biphenyl and of some chlorinated [14C]biphenyls containing 4-chloro-, 2,4-dichloro- and 2,3,6-trichlorophenyl nuclei from the corresponding labelled anilines

The preparation of ¹⁴C-labelled biphenyl, 2,5-dichlorobiphenyl, 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2′,3,4,4′,5-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl, 2,3,3′,4′,6-pentachlorobiphenyl and 2,2′,3,3′,6-pentachlorobiphenyl is described [¹⁴C]Aniline hydrogen sulfate used as a starting material was acetylated, chlorinated and deacetylated followed by coupling to benzene or an appropriate chlorobenzene to give the biphenyls labelled in the phenyl nuclei having chlorine atoms at the 4-, 2,4- or 2,3,6-positions, respectively. The structures of the labelled compounds were established by comparison with authentic samples among which 2′,3,4,4′,5- and 2,2′,3,4,4′-pentachlorobiphenyl were not earlier described.A simple method for the preparation of 2,3,6-trichloroacetanilide, unlabelled and labelled, was worked out. 2,6-Dichloroacetanilide in concentrated hydrochloric acid gave the $\text{meta}$ substituted product when treated with chlorine.An improved thin layer chromatographic technique utilizing plates impregnated with certain tetraalkylammonium salts was used for separation of some of the labelled compounds prepared.     

Biliary secretion,retention and excretion of five 14C-labelled polychlorinated biphenyls in the rat

Five ¹⁴C-labelled polychlorinated biphenyls: 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2,2′,4,5,5′-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl and 2,2′,4,4′,5,5′-hexachlorobiphenyl were administered orally to bile-cannulated rats. The activity secreted in the bile, excreted in the feces and the urine was determined. Residues of radioactivity in certain tissues and the carcass were also measured.The trichlorobiphenyl showed the highest absorption (93.8%±5.4) from the gastrointestinal tract and biliary secretion of radioactivity (87.6%±6.1 of the dose). The hexachlorobiphenyl showed the lowest absorption and biliary secretion, 28.2%±1.4 and 18.6%±1.3, respectively. The urinary excretion was low and the radioactive residues in the eviscerated carcasses increased with the chlorine content of the biphenyls.     

Toxicological assessment of chlorinated diphenyl ethers in the rat, Part II

Chlorinated diphenyl ethers (CDE's) are environmental contaminants that have been found in Great Lakes fish. Because of the paucity of toxicity data and potential for human exposure, the present short-term study was conducted to assess their potential toxic effects. Groups of 10 male and 10 female rats were administered the three CDE congeners (2,2',4,4',5-pentachlorodiphenyl ether (PCDE), 2,2',4,4',5,5'-hexachlorodiphenyl ether (HCDE), 2,2',3,4,4',6,6'-heptachlorodiphenyl ether (HPCDE] in diets at levels of 0.5, 5.0, 50 or 500 ppm for a period of 4 weeks. Decreased food consumption was observed with male and female rats fed the diet containing 500 ppm HPCDE. Treatment with the three isomers at the highest dose level produced an increase in liver weight in both sexes. While administration of PCDE produced an increase in hepatic aminopyrine demethylase activity, HCDE caused a significant increase in aminopyrine demethylase, aniline hydroxylase and ethoxyresorufin de-ethylase activities. HPCDE caused a significant increase in ethoxyresorufin de-ethylase activity. HPCDE at the highest dose level also caused a significant reduction in circulating lymphocytes in male rats. The 3 CDE's produced mild and adaptative histological changes in the liver and thyroid, but only HPCDE elicited mild changes in the thymus, bone marrow, and spleen. The above data indicate that HPCDE is immunosuppressive and that all three CDE isomers are considered to be moderately toxic in rats. The no-observable effects levels appear to be between 5-50 ppm in diet (0.36-3.0 mg/kg b.w.) for the three CDE's.     

Accelerated photo-transformation of 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB 153) in water by dissolved organic matter

The ubiquitous dissolved organic matter (DOM) has an important influence on transformation of organic contaminants through the production of reactive substances, such as ^?OH, ¹O₂, and ³DOM*. The photolysis of a higher chlorinated polychlorinated biphenyl (PCB) congener (2,2′,4,4′,5,5′-hexachlorobiphenyl, PCB 153) under simulated sunlight in presence of humic acid (HA) was investigated. Degradation of PCB 153 was accelerated significantly by the addition of HA, with a rate constant of 0.0214, 0.0413, and 0.0358 h^?1 in the initial 18 h of irradiation in presence of 1, 5, and 20 mg/L HA, respectively. The main photodegradation products analyzed by gas chromatography mass spectrometry were 4-hydroxy-2,2′,4′,5,5′-pentaCB and 2,4,5-trichlorobenzoic acid. Main reactive species involved were determined by the electron spin-resonance spectroscopy, including ¹O₂ and ^?OH. Special scavengers were added to elucidate the photolysis mechanisms. By using the specific scavengers, it turned out that ^?OH accounted for 29.3 % of the degradation, and the intra-DOM reactive species (¹O₂, ^?OH, and ³DOM*) accounted for 59.6 % of the degradation. Photo-transformation sensitized by DOM, which involves both aqueous and intra-DOM reactions of PCBs with reactive species, may be one of the most important mechanisms for natural attenuation of PCBs.     

Comparative toxicities of the polychlorinated dibenzofuran (PCDF) and biphenyl (PCB) mixtures which persist in Yusho victims

The toxic Yusho oil contained a mixture of polychlorinated biphenyls (PCBs) which were contaminated by other halogenated aromatics including the highly toxic polychlorinated dibenzofurans (PCDFs). It has been reported that the PCBs and PCDFs which persist in the liver of victims still suffering from Yusho poisoning include the following compounds; 2,3′,4,4′,5-penta-,2,2′,4,4′,5,5′-,2,2′,3′,4,4′,5- and 2,3,3′,4,4′,5-hexa, 2,2′,3,4,4′,5,5′- and 2,2′,3,3′,4,4′,5-heptachlorobiphenyls and the 2,3,7,8-tetra-, 1,2,4,7,8-, 1,2,3,7,8- and 2,3,4,7,8-penta- and 1,2,3,4,7,8-hexachlorodibenzofurans. All of these PCBs and PCDFs have been synthesized and reconstituted to approximate their composition in human liver. A comparison of the dose-response effects of the reconstituted PCB and PCDF mixtures in causing weight loss, thymic atrophy and the induction of cytochrome P-448-dependent monooxygenases indicated that the PCDF mixture was at least 700 times more active than the PCBs. Since the ratio of PCBs/PCDFs persisting in Yusho patients' blood and liver was less than 600:1 and 5:1 respectively, the results suggest that the PCDFs are the major etiologic agent in Yusho poisoning.     

Is BDE-175 an important enough component of commercial octabromodiphenyl ether mixtures to be listed in Annex A of the Stockholm Convention?

Commercial octabromodiphenyl ether mixtures, containing hexabromodiphenyl ethers and heptabromodiphenyl ethers were listed in Annex A of the Stockholm Convention on May 2009 (Fourth Conference of the Parties) (UNEP, 2009a). Four compounds are specifically mentioned: 2,2′,4,4′,5,5′-hexabromodiphenyl ether (BDE-153), 2,2′,4,4′,5,6′-hexabromodiphenyl ether (BDE-154), 2,2′,3,3′,4,5′,6-heptabromodiphenyl ether (BDE-175), and 2,2′,3,4,4′,5′,6-heptabromodiphenyl ether (BDE-183). Presumably they were identified as key components of commercial mixtures and found to be present in environmental samples. However, since BDE-175 and BDE-183 co-elute on common HRGC columns, the presence of BDE-175 as an important component in technical octa-BDE mixtures has not been illustrated. The successful HRGC/LRMS separation of a 1:1 mixture of BDE-175 and BDE-183, as well as ¹H NMR analysis of technical material, has allowed us to confirm that this congener is not present in technical products (e.g. Great Lakes DE-79™) in quantifiable amounts.     

Thermodynamic analysis of in situ gasification-chemical looping combustion (<Emphasis Type="Italic">i</Emphasis>G-CLC) of Indian coal

Chemical looping combustion (CLC) is an inherent CO₂ capture technology. It is gaining much interest in recent years mainly because of its potential in addressing climate change problems associated with CO₂ emissions from power plants. A typical chemical looping combustion unit consists of two reactors—fuel reactor, where oxidation of fuel occurs with the help of oxygen available in the form of metal oxides and, air reactor, where the reduced metal oxides are regenerated by the inflow of air. These oxides are then sent back to the fuel reactor and the cycle continues. The product gas from the fuel reactor contains a concentrated stream of CO₂ which can be readily stored in various forms or used for any other applications. This unique feature of inherent CO₂ capture makes the technology more promising to combat the global climate changes. Various types of CLC units have been discussed in literature depending on the type of fuel burnt. For solid fuel combustion three main varieties of CLC units exist namely: syngas CLC, in situ gasification-CLC (iG-CLC) and chemical looping with oxygen uncoupling (CLOU). In this paper, theoretical studies on the iG-CLC unit burning Indian coal are presented. Gibbs free energy minimization technique is employed to determine the composition of flue gas and oxygen carrier of an iG-CLC unit using Fe₂O₃, CuO, and mixed carrier—Fe₂O₃ and CuO as oxygen carriers. The effect of temperature, suitability of oxygen carriers, and oxygen carrier circulation rate on the performance of a CLC unit for Indian coal are studied and presented. These results are analyzed in order to foresee the operating conditions at which economic and smooth operation of the unit is expected.     

Acute effects of Fe₂O₃, TiO₂, ZnO and CuO nanomaterials on Xenopus laevis

Metal oxide nanomaterials have exhibited toxicity to a variety of aquatic organisms, especially microbes and invertebrates. To date, few studies have evaluated the toxicity of metal oxide nanomaterials on aquatic vertebrates. Therefore, this study examined effects of ZnO, TiO₂, Fe₂O₃, and CuO nanomaterials (20-100 nm) on amphibians utilizing the Frog Embryo Teratogenesis Assay Xenopus (FETAX) protocol, a 96 h exposure with daily solution exchanges. Nanomaterials were dispersed in reconstituted moderately hard test medium. These exposures did not increase mortality in static renewal exposures containing up to 1000 mg L⁻¹ for TiO₂, Fe₂O₃, CuO, and ZnO, but did induce developmental abnormalities. Gastrointestinal, spinal, and other abnormalities were observed in CuO and ZnO nanomaterial exposures at concentrations as low as 3.16 mg L⁻¹ (ZnO). An EC₅₀ of 10.3 mg L⁻¹ ZnO was observed for total malformations. The minimum concentration to inhibit growth of tadpoles exposed to CuO or ZnO nanomaterials was 10 mg L⁻¹. The results indicate that select nanomaterials can negatively affect amphibians during development. Evaluation of nanomaterial exposure on vertebrate organisms are imperative to responsible production and introduction of nanomaterials in everyday products to ensure human and environmental safety.     

应用神经网络方法优化垃圾焚烧模拟灰渣熔点的预测

采用SiO₂、Al₂O₃、CaO、Na₂CO₃、NaCl和Fe₂O₃等物质来模拟垃圾焚烧的真实灰渣组成,通过实验测定模拟灰渣熔点,建立神经网络模型进行熔点预测,由预测结果来指导进一步实验,得到修正的模型,最终预测出的半球温度（HT）平均误差低于5%。     

Recycling of iron and silicon from drinking water treatment sludge for synthesis of magnetic iron oxide@SiO<Subscript>2</Subscript> composites

More attention has been paid to the deterioration of water bodies polluted by drinking water treatment sludge (DWTS) in recent years. It is important to develop methods to effectively treat DWTS by avoiding secondary pollution. We report herein a novel investigation for recovery of Si and Fe from DWTS, which are used for the synthesis of two iron oxide@SiO₂ composites for adsorption of reactive red X-3B (RRX-3B) and NaNO₂. The results show that Fe³⁺ (acid-leaching) and Si⁴⁺ (basic-leaching) can be successfully recovered from roasted DWTS. Whether to dissolve Fe(OH)₃ precipitation is the key point for obtaining Fe₃O₄ or γ-Fe₂O₃ particles using the solvothermal method. The magnetic characteristics of Fe₃O₄@SiO₂ (390.0 m² g^?1) or Fe₂O₃@SiO₂ (220.9 m² g^?1) are slightly influenced by the coated porous SiO₂ layer. Peaks of Fe–O stretching vibration (580 cm^?1) and asymmetric Si–O–Si stretching vibrations (1080 cm^?1) of Fe₃O₄@SiO₂ indicate the successful coating of a thin silica layer (20–150 nm). The adsorption capacity of RRX-3B and NaNO₂ by Fe₃O₄@SiO₂ is better than that of Fe₂O₃@SiO₂, and both composites can be recycled through an external magnetic field. This method is an efficient and environmentally friendly method for recycling DWTS.     

1990 Government Agencies Directory

ABSTRACT

The kinetics of pentachlorophenol (PCP) ozonation in terms of the gaseous O₃ and dissolved PCP concentrations has been investigated. When the O₃ concentration in the gas phase was in the range of 10 to 40 g O₃/m³, the O₃ dissolved for a short time period was proportional to the gaseous O₃ concentration. In this range, the ozonation reaction was first order for each reactant and the overall reaction was second order. At 25 °C, in an aqueous solution, the reaction rate constant was estimated to be 10.048 L/mol-sec. The reaction rate was much greater than the mass-transfer rate, indicating that the reaction of O₃ and PCP was an interface reaction on the surface of gaseous O₃ bubbles. The final product of the PCP ozonation was oxalic acid, with the carbon yield of the reaction being 59.4%. The ozonation of PCP in the aqueous solution was not a radical reaction but a direct reaction between O₃ and PCP molecules under the conditions investigated in this study, since O₃ has a high selectivity toward PCP. The reaction rate increased with the reaction temperature up to 35 °C but decreased at temperatures greater than 35 °C due to the decreased solubility of O₃. The addition of H₂O₂ did not increase the reaction rate significantly.     

Study on the removal of elemental mercury from simulated flue gas by Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-CeO<Subscript>2</Subscript>/AC at low temperature

Fe₂O₃ and CeO₂ modified activated coke (AC) synthesized by the equivalent-volume impregnation were employed to remove elemental mercury (Hg⁰) from simulated flue gas at a low temperature. Effects of the mass ratio of Fe₂O₃ and CeO₂, reaction temperature, and individual flue gas components including O₂, NO, SO₂, and H₂O (g) on Hg⁰ removal efficiency of impregnated AC were investigated. The samples were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Results showed that with optimal mass percentage of 3 % Fe₂O₃ and 3 % CeO₂ on Fe3Ce3/AC, the Hg⁰ removal efficiency could reach an average of 88.29 % at 110 °C. Besides, it was observed that O₂ and NO exhibited a promotional effect on Hg⁰ removal, H₂O (g) exerted a suppressive effect, and SO₂ showed an insignificant inhibition without O₂ to some extent. The analysis of XPS indicated that the main species of mercury on used Fe3Ce3/AC was HgO, which implied that adsorption and catalytic oxidation were both included in Hg⁰ removal. Furthermore, the lattice oxygen, chemisorbed oxygen, and/or weakly bonded oxygen species made a contribution to Hg⁰ oxidation.     

CuO/TiO2-H2O2可见光催化亚甲基蓝脱色效果及影响因素研究

以水解法制备的锐钛矿型TiO2为载体,制备了CuO/TiO2型光催化剂.以亚甲基蓝为对象,在可见光照射下研究了H2O3加入量、pH值和催化剂投加量对脱色效果的影响,同时与改性前的TiO2催化剂进行了脱色效果的对比.结果表明亚甲基蓝在碱性条件下能较好脱色,H2O2用量和CuO/TiO2催化剂投加量分别为每1 000 mL反应液各加入10 mL和0.1 g时脱色最好;另外,TiO2催化剂也在碱性条件下能较好脱色,H2O2用量和催化剂投加量分别为每1 000 mL反应液各加入12.5 mL和0.1 g时脱色最好.最优条件下对比实验表明,CuO/TiO2型催化剂在可见光照射下具有很高的催化活性,亚甲基蓝2 h脱色率达到88%,远好于改性前的TiO2和Degussa P25催化剂.     

Comparison of Fenton and Photo-Fenton Processes for Livestock Wastewater Treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe^{2 +}/H₂O₂, and the Fe^{2 +} dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe^{2 +} dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe^{2 +}/H₂O₂) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70–79, 70–85 and 96.0–99.4%, respectively.     

Identification of hydroxylated metabolites in 2,2',4,4'-tetrabromodiphenyl ether exposed rats

Faeces from day 1-5 of orally administered 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) in rat have been analysed for hydroxylated metabolites. Six hydroxylated tetrabrominated diphenyl ethers, as well as three hydroxylated tribrominated diphenyl ethers found, were structurally identified. They were 2'-hydroxy-2,4,4'-tribromodiphenyl ether, 3'-hydroxy-2,4,4'-tribromodiphenyl ether, 4'-hydroxy-2,2',4-tribromodiphenyl ether, 6-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 2'-hydroxy-2,3',4,4'-tetrabromodiphenyl ether, 3-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 5-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 4'-hydroxy-2,2',4,5'-tetrabromodiphenyl ether and 4-hydroxy-2,2',3,4'-tetrabromodiphenyl ether. The analysis was performed using gas chromatography-mass spectrometry (GC-MS). The identification of the hydroxylated polybrominated diphenyl ether (OH-PBDE) metabolites in the rat faeces was supported by similar relative retention times (RRTs) versus 2,2',3,4,4',5-hexabromodiphenyl ether (BDE-138) on two columns of different polarities compared to the authentic references. The identification of the OH-PBDE metabolites was also supported by full scan electron ionisation mass spectra. Two of the identified OH-PBDE metabolites have identical structures as natural products, which previously have been isolated from marine sponges and an ascidian.     

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183)

2,2′,3,5′,6-Pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.     

4种高级氧化法处理高浓度正丙醇废水的动力学比较

研究了1%和10%(V/V)模拟正丙醇废水在UV/TiO2体系、UV/H2O2体系、Fe2+/H2O2体系和UV/TiO2/Fe2+/H2O2体系等4种工艺条件下的降解动力学过程,对比了降解动力学特点及工艺参数对动力学常数的影响,优化工艺参数。结果表明,UV/TiO2体系和Fe2+/H2O2体系的降解过程可分为零级反应阶段和一级反应阶段,转折点分别在反应开始后2 h和氧化剂浓度为6.7 g/L,UV/H2O2体系和UV/TiO2/Fe2+/H2O2体系分别符合零级反应和一级反应规律;相同工艺参数条件下,6 h反应后,组合工艺UV/TiO2/Fe2+/H2O2体系在处理效率达85%,比前3个体系分别高52.0%、8.3%和32.0%,与UV/TiO2体系和Fe2+/H2O2体系的处理效率之和持平,其协同效应提高了速率常数,在目标物浓度降低时依然可维持较高降解速率。而目标物浓度提高10倍后,UV能量利用率提高35.5倍,氧化剂用量是Fe2+/H2O2体系的1/7.1。     

Inorganic nanoparticles enhance the production of reactive oxygen species (ROS) during the autoxidation of L-3,4-dihydroxyphenylalanine (L-dopa)

Public concerns over the toxicity of nanoparticles (NPs) are growing due to the rapid development of nanotechnology. An important mechanism of nanotoxicity is oxidative stress resulting from reactive oxygen species (ROS). In this study, the chemical production of ROS by inorganic NPs oxidizing the mammalian phenolic compound, l-3,4-dihydroxyphenylalanine (l-dopa) was evaluated using a ROS sensitive dye, 2′,7′-diclorodihydrofluorescin (DCFH). CeO₂, Fe₂O₃ and Fe⁰ NPs enhanced ROS production during the autoxidation of l-dopa by more than four-fold in reactions that were dependent on O₂. This is the first report of chemical ROS production due to interaction of phenolic compounds with NPs. Mn₂O₃ oxidized DCFH in a reaction that did not require O₂ or l-dopa, suggesting a direct redox reaction between the Mn₂O₃ and the dye. CeO₂, Mn₂O₃ and to a lesser extent Fe⁰ formed clear electron paramagnetic resonance (EPR) signature for hydroxyl radicals when incubated in aerobic aqueous suspensions with spin traps. The results indicate that NPs can generate ROS via chemical reactions with medium components and biomolecules susceptible to oxidation, such as l-dopa. NPs were reactive whereas micron-sized particles were not. The combined assay with l-dopa and DCFH is a method proposed to screen for chemical ROS production by NPs.