Effect of Different Types of Rest-Break Interventions on Neck and Shoulder Muscle Activity,Perceived Discomfort and Productivity in Symptomatic VDU Operators: A Randomized Controlled Trial

Objective. This study evaluated the effect of different types of activities during rest-break interventions on neck and shoulder muscle activity, muscle discomfort and productivity among symptomatic video display unit (VDU) operators performing prolonged computer terminal work. Study design and setting. Randomized controlled trial was used. Thirty symptomatic VDU operators were randomly assigned to 2 active break groups (stretching and dynamic movement) and a reference group. The subjects performed the same typing task for 60 min and received 3-min breaks after each 20 min of work. Root mean square and median frequency were calculated for neck and shoulder muscle activity. Muscle discomfort was measured with Borg’s CR-10 scale. Productivity was measured by counting words. Results. There were no significant differences between the types of activities during breaks on neck and shoulder muscle activity, muscle discomfort or productivity. However, there was a significant difference in the level of muscle discomfort over time. Conclusions. Three types of activity during breaks showed a favourable effect on neck and shoulder muscle activity and productivity, and a positive effect on muscle discomfort in symptomatic VDU operators.     

The effectiveness of U.S. OSHA process safety management inspection – A preliminary quantitative evaluation

This study attempted to evaluate the inspection effectiveness of the U.S. OSHA process safety management (PSM) standard using statistical correlation test. A total of 6578 citations of past 1277 OSHA PSM inspections from 1992 to 2006 were quantitatively compared with the findings of the U.S. Chemical Safety and Hazard Investigation Board (CSB) investigations on root and contributing causes of 19 major chemical accidents. Nonparametric Spearman's coefficient of rank correlation tests showed a moderately strong agreement between OSHA PSM inspection citations and CSB findings at p < .01 significant level, and the degree of agreement increased with time. These results suggested that past OSHA PSM inspections had cited the problems that were the accident root causes, and the effectiveness of PSM citations has been improved as more inspections were conducted since the standard promulgation. However, factors such as standard coverage, inspection frequency, inspection resources allocation, and inspection strategy, were critical for effective PSM standard enforcement and implementation. Future studies should include more aspects of PSM citations and CSB accident investigation data for better evaluation of inspection effectiveness. The results may be valuable to the PSM enforcement policy makers.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Perceived Discomfort and Electromyographic Activity of the Upper Trapezius While Working at a VDT Station

Ten female participants performed work at a video display terminal (VDT) station over a whole working day. Subjective local muscular fatigue was evaluated by means of the Category Ratio 10 scale. Electromyographic activity of the upper right and left trapezius was measured. A comparison was made between 5 participants who had previous complaints and 5 participants who reported no musculoskeletal problems in the shoulder-neck region. The subjective scores for the shoulder differed significantly between the two groups, being higher for the group with complaints. Both groups showed a decrease in discomfort after the lunch break. The activity of the trapezius increased significantly for both groups, in a more pronounced way for the group with disorders. Although it is found in literature that VDT work is a task with very low static loads, it seems from this study that the EMG activity increase can be an indication of muscle fatigue: More effort was required to accomplish the same VDT task at the end of the day.     

Force-Velocity Characteristics of Individual Human Skeletal Muscles: TBCIat and TBCIong. Outline of the Method

The aim of the work is to outline a procedure of finding force-velocity (F–V) characteristics (F = f(V)) of individual skeletal muscles of the human locomotor system. The presentation is based on an example concerning extensors of the elbow joint: the lateral and long heads of triceps brachii (TBCIat and TBCIong). The experimental part of the procedure involves a natural movement of using the upper extremity to push an external object of variable, adjustable load, engaging both the elbow and shoulder joint.

Five men aged 23 took part in the experiment. Their task was to push the handle of a physical pendulum whose moment of inertia could be adjusted within the range of 58 kg m²-450 kg m², so as to give it maximum angular velocity. During each trial the movement of the trunk, of the upper extremity and of the pendulum was video recorded and the force applied with the hand to the handle of the pendulum was measured.

In order to find the F–V characteristics a simulation model SHOULDER was used, which is capable of solving the synergy problem for muscles of the arm and the shoulder girdle.

It was found that despite considerable dispersion of experimental points the respective regression lines revealed a clear tendency of decreasing muscle force for increased shortening velocity of the monoarticular head (TBCIat) and of increasing muscle force for increased lengthening velocity of the biarticular head (TBCIong) of the triceps brachii muscle.     

Development of statistical models for predicting muscle and mental activities during repetitive precision tasks

This study was conducted to develop muscle and mental activities on repetitive precision tasks. A laboratory experiment was used to address the objectives. Surface electromyography was used to measure muscle activities from eight upper limb muscles, while electroencephalography recorded mental activities from six channels. Fourteen university students participated in the study. The results show that muscle and mental activities increase for all tasks, indicating the occurrence of muscle and mental fatigue. A linear relationship between muscle activity, mental activity and time was found while subjects were performing the task. Thus, models were developed using those variables. The models were found valid after validation using other students’ and workers’ data. Findings from this study can contribute as a reference for future studies investigating muscle and mental activity and can be applied in industry as guidelines to manage muscle and mental fatigue, especially to manage job schedules and rotation.     

煤矿安全质量标准化管理信息系统的开发与应用

针对我国安全质量标准化工作日常考核和汇总繁琐且不利于统计分析的问题,采用ASP.NET与SQL Server的技术,以国家煤矿安全质量标准化及考评办法为依据,融合煤矿企业安全质量标准化的现场管理考评实际,开发设计了包括政策查询、考评标准和方法查询学习、考核评级、结果查询、统计分析、后台管理在内的6大功能模块的煤矿安全质量标准化管理信息系统,并在某矿业集团进行了实际应用。在理论与实例应用的基础上,得出系统可以有效对安全质量标准化标准自查过程的记录,对隐患按项目进行归类管理,对检查结果进行统计分析,及时跟踪处理现场存在的安全隐患。     

我国矿山透水事故致因分析及安全管理对策

为找出影响矿山透水事故的主要因素,提出有针对性的管理对策.首先利用统计分析方法对80起透水事故案例原因进行统计分析,结果显示导致矿山透水事故的直接原因主要有违章、非法开采、越界开采、防水设施不符合规范要求、水文地质资料不清、破坏防水设施;间接原因主要有思想麻痹、安全监督检查不到位、违反探放水原则、法律意识淡薄、安全教育培训不到位.其次,结合透水事故的发生机理,利用鱼刺图法从人、物、环境和管理等方面进行系统分析.综合统计分析和系统分析,确定影响矿山透水事故的主要因素为管理因素.在此基础上,提出了相应的安全管理对策.     

民用运输机场安检系统风险影响因素研究*

为提高民用运输机场安检系统风险管理水平,提出机场安检系统风险辨识模型,基于流程分析的方法确定机场安检的关键岗位,对各关键岗位中的不安全事件运用假设故障类型分析得出各岗位的风险因素;从人-机-环-管对风险因素进行归纳总结,建立民用运输机场安检系统风险影响因素集。提出DEMATEL-ISM风险集成模型分析安检系统风险影响因素的相互关系及层次结构。结果表明:通过模型的影响度计算得出,社会局势对机场安检系统风险影响最大、安检员的服务态度最易受其他因素的影响;通过模型的多层递阶解释结构计算得出,社会局势、安检作业环境、安检员薪酬制度和晋升制度是机场安检系统风险的根源影响因素。集成模型有效分析机场安检系统风险影响因素及其重要性和层次结构,可为机场安检系统风险的有效管理提供依据。     

危化品突发泄漏事故应急检测标准化作业研究

介绍了危化品突发泄漏事故应急检测方法,包括试纸法、气体速测管法和便携式分析仪器测定法。对硫化氢、氨、苯、可燃气4种典型有害物质的应急检测方法与标准检测方法进行了实验比对,结果表明其应急检测方法能够满足应急检测工作的要求。编写了危化品突发泄漏事故应急检测标准化作业文件集和《危化品突发泄漏事故应急检测作业指南》。文件集的建立能够规范应急检测工作流程、保证应急检测工作质量、提高工作效率。《危化品突发泄漏事件应急检测作业指南》,能够保证事故现场应急检测工作高效有序开展,为应急救援人员提供必要安全保障,为事故原因调查和分析提供充分可靠的数据依据。     

A preliminary validation of a new measure of occupational health and safety

INTRODUCTION: This article describes the validation of an instrument designed to conduct an Occupational Health and Safety (OHS) self-diagnosis using workers observations of tangible facts and actions in the workplace. The instrument puts the emphasis on observable factors that make it possible to act proactively before accidents actually occur. METHOD: Three companies were recruited from the printing sector in Québec based on their OHS performance (low, medium, and high), their interest in the project, and their availability. The master sample was composed of 269 people. Partial least squares (PLS) and vanishing tetrad analyses were used to study the behavior of the formative scales developed. RESULTS: The results indicate that partial revision of the instrument will be necessary to reach a fully satisfying level of validity. With regards to the statistical approach adopted, the use of a macro called CTA-SAS 2.0 developed by Bollen and Ting [Bollen, K.A., & Ting, K.-F. (1993). Confirmatory tetrad analysis. In P.V. Marsden (Ed.), Social methodology.Vol.23 (pp.147-176). Cambridge, MA: Blackwell, 23] has proven to be effective in providing a suitable statistical treatment of the latent formative variables on which our instrument's development is based. CONCLUSION: The results suggest that the instrument appears to be relatively robust and appropriate to diagnose OHS leading measures. IMPACT ON INDUSTRY: In the long run, this instrument will make it possible for companies to draw a more refined picture of OHS evolution, even in the absence of occupational injuries.     

基于数字信息化的消防呼吸气瓶检验管理系统研究与开发

为解决碳纤维缠绕式消防呼吸气瓶检验中因单机作业而存在的检验效率低、检验质量差、受人为因素影响的问题,研究开发基于数字信息化的碳纤维缠绕式消防呼吸气瓶检验管理系统,该检验系统包括消防呼吸气瓶数据库、OA系统、呼吸气瓶检验软件和手机APP。利用二维码技术和计算机网络,实现呼吸气瓶数据库、检验软件、OA约检和报告审核审批系统、手机APP的数据传输。结果表明:该检验管理系统实现了呼吸气瓶检验的无纸化、过程的可追溯性、检验结果的防伪性等功能,其对于碳纤维缠绕式消防呼吸气瓶检验具有较强的适用性和可行性。     

Muscle Tetanus and Loading Condition Effects on the Elastic and Viscous Characteristics of the Thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G_∞) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

Muscle tetanus and loading condition effects on the elastic and viscous characteristics of the thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G( infinity )) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

Risk-based inspection (RBI) of a gas pressure reduction station

One of the principles of corrosion management is proper inspection methodology, and in particular the risk-based inspection (RBI). Occasionally a large percentage of the total risk of a unit is concentrated in a small part of the equipment, which can be reduced by using risk management techniques. In this study, a semi-quantitative risk-based inspection method has been performed in a gas station with for its components (pipelines, filters, etc.), to identify the existing damage mechanisms and also to rank its equipment in terms of inspection intervals. In this regard, RBI was performed for the gas station which consisted of phases (Phase A & Phase B) with Class 300 and Class 600 equipment. According to documented conditions and reviewed records the main damage mechanism for the investigated components in the gas station was identified as wall thinning due to erosion corrosion and external corrosion. In terms of inspection, results showed that most of the equipment studied had medium risk level and a few had medium to high level of risk. In this regard, the corrosion rates of Class 300 and Class 600 equipment were also studied and compared, and it was indicated that the corrosion rates were higher at locations for Class 300 equipment where more pressure drop had occurred. Overall, based on the obtained corrosion rates and obtained risk matrixes, it was concluded that wall thinning (erosion-corrosion) was the determining risk factor for equipment inspected in the gas pressure reduction station.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the Polish part of the international study.

A group of routine data entry operators (female) was included in the Polish MEPS (musculoskeletal--eyestrain--psychosocial--stress) study. Before the intervention, ergonomic assessment revealed improper working conditions such as inadequate lighting, uncomfortable chairs, and lack of forearm and wrist support while medical examination revealed that trapezius muscle load along with upper arm, head and back angles were higher than advisable. Subjects complained about neck and shoulder pain, visual problems, and psychosocial conditions. The ergonomic intervention included installation of new luminaires and Venetian blinds, new chairs, repair of ventilators, and optometric corrections. The results after the intervention showed mainly improvement in chair comfort, lighting conditions, visual strain, and sitting posture. However, financial limitations did not allow satisfactory completion of the intervention leading to a mixed interpretation of the results.     

Ranking of process safety cultures for risk-based inspections using indicative safety culture assessments

Although major hazard industries have no legal obligations to demonstrate a good safety culture, it is an increasingly important factor for risk-based inspections. This paper describes the development and evaluation of a relatively simple method for external indicative assessment of the process safety culture in major hazard industries. As a first step, a tool was developed. Second, the tool was successfully tested in a workshop with major hazard inspectors. After this ‘proof of concept’ and a few adaptations to improve the tool, quantitative evaluation and validation were carried out with a representative sample of major hazard inspectors in the Netherlands. In this stage, the tool comprised 30 questions, of which 19 sufficiently frequent valid responses were given for the validity test. The evaluations demonstrate that without specific preparations, inspection teams can use the tool to discriminate between plants with poor or good safety cultures. That is sufficient for ranking as additional input for risk-based inspection strategies. The resulting indicative ‘scores’ for safety culture correlate meaningfully with the quality of process safety management systems and the number of (legal) non-compliances, which were identified by the inspection team at the same occasion. The use of the tool can be further improved by training inspectors, making minor adaptations of the inspection process, and broadening the scope of a few questions. It is expected that external assessments of safety culture will become increasingly important not only for inspectorates, but also for a range of other external stakeholders.     

Ergonomic Risk Factors for Cumulative Trauma Disorders in VDU Operators

The objectives of this study were to investigate the rate of cumulative trauma disorders (CTDs) in the upper body and to describe the associations of such disorders with ergonomic parameters in a group of data entry operators. A total of 173 data entry operators volunteered to take part in the study. Questionnaires were used to investigate their medical history. Diagnoses of CTDs were made with clinical tests. A visual posture analysis of the workers and an ergonomic analysis of workstations and workload were used to reveal risk factors. Neck and shoulder pain, extensor tendonitis of the wrists and De Quervain’s disease were common in the study population. An assessment of risk factors showed that leaning wrists on the keyboard, hard keystrokes, extreme wrist joint and thumb positions and working in poor ergonomic design were correlated to pain and development of CTDs.     

Frontal impact dummy kinematics in oblique frontal collisions: evaluation against post mortem human subject test data

OBJECTIVE: Today, a predominant percentage of vehicles involved in car crashes are exposed to oblique or frontal offset collisions. The aim of this study is to evaluate the 50th percentile male Hybrid III, THOR 99, and THOR Alpha dummies by comparing them with the corresponding kinematics of post mortem human subjects (PMHS) in this type of collision. METHODS: The PMHS data include results from oblique frontal collision tests. They include sled tests with near-side and far-side belt geometries at 15 degrees , 30 degrees , and 45 degrees angles. The test subjects were restrained with a three-point lap-shoulder belt and the Delta V was 30 km/h. RESULTS: The results from the Hybrid III and THOR 99 tests showed that, in most of the test, the head trajectories were an average of approximately 0.1 m shorter than those from equivalent PMHS. The Hybrid III and THOR 99 far-side belt geometry tests showed that the belt remained in place longer on the shoulder of the Hybrid III than on the THOR 99 and the THOR Alpha. This was probably due to a stiffer lumbar spine in the Hybrid III and to a large groove in the steel of the superior surface of the Hybrid III shoulder structure. The THOR 99 escaped from the shoulder belt about 40-50 ms earlier than the THOR Alpha. The results from the THOR Alpha tests show that the head trajectory accorded fairly well with the PMHS data, as long as the shoulder belt did not slip off the shoulder. Although the THOR Alpha shoulder escaped the shoulder belt in the 45 degrees far-side belt geometry, the PMHS did not. This may be due to the THOR Alpha shoulder design, with approximately 0.05 m smaller superior and medial shoulder range-of-motion, in combination with a relatively soft lumbar spine. CONCLUSIONS: The THOR Alpha provides head trajectories similar to those of the PMHS under these loading conditions, provided the shoulder belt remains in position on the shoulder. When the shoulder belt slipped off the dummy shoulder, the head kinematics was altered. The shoulder range-of-motion may be a contributing factor to the overall kinematics of an occupant in oblique frontal impact situations where the occupant moves in a trajectory at an angle from that of the longitudinal direction of the car.     

A model for occupational injury risk assessment of musculoskeletal discomfort and their frequencies in computer users

Occupational injuries pose a major problem in workplaces where computers are widely used. Intensive, repetitive and long period computer use results in costly health problems (direct cost), and lost productivity (indirect cost). Yet, the effect of musculoskeletal discomfort and their frequencies associated with the use of computers have not received considerable attention. This paper presents the findings of a risk assessment model through a scientific research to determine the effect of discomfort factors that contribute to musculoskeletal disorders resulting from intensive use of computers in the workplaces. In this context a questionnaire was given to 130 intensive computer users working in the university sector. A list of significant predictor variables for musculoskeletal disorders was developed to assess and analyze workplace ergonomics, worker attitudes and experiences on computer keyboard and mouse. The main focus of the current research is to seek and provide evidence that symptoms of musculoskeletal discomfort and the frequency of these symptoms are significant in the development of work-related musculoskeletal disorders (WRMSDs). This study provides the evidence that, ache and pain are the most common types of discomforts in all body regions. The discomforts were more pronounced at neck, shoulder, upper back, hand/wrist, and lower back regions. The risk factors determined by the risk assessment model were validated through ANOVA of the sEMG records for the control and test groups. The findings indicated that for each test group respondent, the mean musculoskeletal strain experienced differs in time, but the same is not true for the control group.