Educational status and organizational safety climate: Does educational attainment influence workers’ perceptions of workplace safety?

From a practical perspective, understanding the impact of education on perceptions of workplace safety would benefit management’s decisions regarding workers’ adaptability, general work effectiveness, accident frequency, implementation of safety management policies, and handling of education-related accident characteristics. The current study thus examined the relationship between educational attainment and (i) safety perception, (ii) job satisfaction, (iii) compliance with safety management policies, and (iv) accident frequency. Participants were Ghanaian industrial workers (N = 320) categorized into four educational groups based on their responses: basic education 50% (n = 159); secondary education, n = 98 (30%); vocational/professional education, 17% (n = 56); and university education, 3% (n = 7). Workplace safety perception was assessed with Hayes et al.’s 50-item Work Safety Scale (WSS): a scale that effectively captures the dimensions identified by safety experts to influence perceptions of workplace safety. Multivariate analysis (MANOVA) was used to test for differences of statistical significance. Posterior comparison with t-test consistently revealed significant differences between the two higher-educated cohorts and their lower-educated counterparts. The results indicated a positive association between education and safety perception. Higher-educated workers recorded the best perceptions on safety, indicated the highest level of job satisfaction, were the most compliant with safety procedures and recorded the lowest accident involvement rate.     

A survey of forest workers in New Zealand. Do hours of work, rest, and recovery play a role in accidents and injury?

PROBLEM: A number of structural and organizational changes have occurred recently within the New Zealand Forestry Industry, with concerns being raised about the impact of these changes on the forestry worker in terms of fatigue, sleepiness, and compromised safety. This study explored the relationship of fatigue, and some of its key determinants, with accidents and injuries in a group of forestry industry workers in New Zealand. METHOD: A total of 367 forestry workers responded to a self-administered questionnaire. RESULTS: Fatigue was found to be commonly experienced at work in the forest, with 78% of workers reporting that they experienced fatigue at least "sometimes." This study found that certain groups of workers reported long working hours, reduced sleep, compromised recovery time, and intensely paced work. The results of logistic regression analysis showed that recent sleep, number of breaks taken during the workday, and specific job/tasks were independently associated with reporting of high fatigue levels at work. Near-miss injury events were significantly more common among those reporting a high level of fatigue at work. Accidents and lost-time injury were associated with length of time at work, ethnicity, and having had near-miss injury events. DISCUSSION: Together, these results suggest that fatigue and aspects of work organization, which are likely to be fatiguing, may be associated with compromised safety for forest workers. IMPACT ON INDUSTRY: With an already slim margin of error present in forest operations, an impairment due to increased fatigue may constitute a significant risk factor for accidents and injuries in this workforce. The results indicate the need for further examination of shift and workload management among forestry workers, as well as a role for improving industry awareness about the causes and consequences of fatigue.     

An application of the Pareto method in surveys to diagnose managers’ and workers’ perception of occupational safety and health on selected Polish construction sites

The construction industry is an important sector of the economy in Poland. According to the National Labour Inspectorate (PIP) data of 2014, the number of victims of fatal accidents in the construction sector amounted to 80 as compared with 187 injured in all other sectors of economy in Poland. This article presents the results of surveys on the impact of construction worker behaviour on the occupational safety and health outcomes. The surveys took into account the point of view of both construction site management (tactical level) and construction workers (operational level). For the analysis of results, the method of numerical taxonomy and Pareto charts was employed, which allowed the authors to identify the areas of occupational safety and health at both an operational and a tactical level, in which improvement actions needed to be proposed for workers employed in micro, small, medium and large construction enterprises.     

Investigation and identification of factors affecting migrating peasant workers’ usage of safety footwear in the Chinese construction industry

A sample of 300 migrating peasant workers from 15 Chinese building construction sites completed a demographic questionnaire to investigate the usage of safety footwear. The survey form was constructed based on the theory of planned behaviour, and a total of 12 questions focusing on the workers’ past experience, attitudes, subjective norms and perceived behavioural control were included in the survey. It was found that 92% of the participants did not wear safety footwear while working on construction sites, although more than 91% of them believed that safety footwear would protect the foot from injury; none of the participants had been provided free safety footwear by their employer. Regression analysis shows that employers’ attitude is the most important factor affecting their usage of safety footwear, ‘providing free safety footwear’ and ‘comfortability of the safety footwear’ ranking second and third respectively.     

Should the subjective be the objective? On studying mental processes,coping behavior,and actual exposures in organizational stress research

Emphasis on measuring actual (‘objective’) job exposures has increased in recent organizational behavior/human resource management research. I argue that this approach has greater potential for increasing knowledge about how to make work environments more healthy than the alternative approach of focusing on mental processes and individual coping behaviors suggested by Perrewe and Zellars. Incorporating psychological knowledge about attributions and emotions can enhance theory building in the organizational sciences. However, given that health outcomes are more strongly related to continuous exposures it may be better to focus on modal job content and general tendencies of individuals than to emphasize discrete events and specific, transitory states. Copyright © 1999 John Wiley & Sons, Ltd.     

Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.     

Occupational Safety Culture Index (OSCI)——measuring the community and employees awareness,attitude and knowledge towards workplace safety and health in Hong Kong SAR

Promoting occupational safety and health in Hong Kong,Special Administrative Region of China is an important and ongoing mission. As the major organization with statutory responsibilities,the Occupational Safety and Health Council understand the importance to strengthen and cultivate our safety culture. It is widely believed that numbers of occupational related diseases and injuries could be prevented with the improvement of the awareness and attitudes of the employees and the public. Therefore,a comprehensive and in-depth study to monitor the occupational health and safety level and status of the community and working population is needed. Objectives: Our Council has developed the Occupational Safety Culture Index ( OSCI) to measure the current level of community and workplace safety and health awareness,knowledge and attitude. Benchmarking measures of the key safety performance indicators are to be derived thereof. Methods: A territory-wide random telephone survey was conducted to assess the community and employees’awareness,attitude and knowledge in 2008. A structured questionnaire was designed with the content validity and reliability assessed before the survey administration. A series of quality control approaches were also applied to assure the quality of the fieldwork and the reliability of the data. Results: 1,531 eligible participants’data were collected and computed into 2 types of composite indices,Occupational Safety Culture Index ( Community) ( OSCIC) and Occupational Safety Culture Index (Workplace) (OSCIW) . With the maximum score of index at 100,the overall score of OSCIC is 66. 9 and the OSCIW is 61. 3 in Hong Kong. Achievements: OSCI served as an effective management tool to measure the safety culture in Hong Kong. With a representative sample and high quality study control and validated assessment approaches,the OSCI and the sub-indices are reliable indicators to assess the effectiveness of safety culture enhancement strategy and the OSH intervention measures.     

An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge,norms, attitude and intention to enact workplace safety and health skills

Introduction: For many reasons, including a lack of adequate safety training and education, U.S. adolescents experience a higher rate of job-related injury compared to adult workers. Widely used social-psychological theories in public health research and practice, such as the theory of planned behavior, may provide guidance for developing and evaluating school-based interventions to prepare adolescents for workplace hazards and risks. Method: Using a structural equation modeling approach, the current study explores whether a modified theory of planned behavior model provides insight on 1,748 eighth graders’ occupational safety and health (OSH) attitude, subjective norm, self-efficacy and behavioral intention, before and after receiving instruction on a free, national young worker safety and health curriculum. Reliability estimates for the measures were produced and direct and indirect associations between knowledge and other model constructs assessed. Results: Overall, the findings align with the theory of planned behavior. The structural equation model adequately fit the data; most path coefficients are statistically significant and knowledge has indirect effects on behavioral intention. Confirmatory factor analyses suggest that the knowledge, attitude, self-efficacy, and behavioral intention measures each reflect a unique dimension (reliability estimates ≥0.86), while the subjective norm measure did not perform adequately. Conclusion: The findings presented provide support for using behavioral theory (specifically a modified theory of planned behavior) to investigate adolescents’ knowledge, perceptions, and behavioral intention to engage in safe and healthful activities at work, an understanding of which may contribute to reducing the downstream burden of injury on this vulnerable population—the future workforce. Practical application: Health behavior theories, commonly used in the social and behavioral sciences, have utility and provide guidance for developing and evaluating OSH interventions, including those aimed at preventing injuries and promoting the health and safety of adolescent workers in the U.S., who are injured at higher rates than are adults.     

Impact of safety attitude,safety knowledge and safety leadership on chemical industry workers’ risk perception based on Structural Equation Modelling and System Dynamics

In chemical industry, major accidents occur occasionally. Past research has demonstrated that risk perception was relevant to safety as it might affect the behavior, which could exert influence on the probability of accidents. It is important to adjust workers' risk perception to reduce accidents in chemical industry. To achieve this goal, some key influencing factors of workers’ risk perception of were identified from 3 aspects including safety attitude, safety knowledge and safety leadership. This was accomplished by gathering empirical data from 287 workers employed in 6 Chemical plants in Jiangsu, China. The model of influencing factors of risk perception for workers was established based on Structural Equation Modelling (SEM), and the path coefficients and weights were analyzed by the SEM. On that basis, the System Dynamics (SD) model of risk perception for workers was established. The study findings revealed safety attitude and safety leadership have a direct positive impact on perception of risk probability and perception of risk severity, safety knowledge has a direct positive impact on perception of risk severity, while safety knowledge has no direct positive impact on perception of risk probability. The findings of the study can provide theoretical supports and method guidance for adjusting the risk perception of workers in chemical industry.     

The role of risk avoidance and locus of control in workers’ near miss experiences: Implications for improving safety management systems

The process industry has made major advancements and is a leader in near-miss safety management, with several validated models and databases to track close call reports. However, organizational efforts to develop safe work procedures and rules do not guarantee that employees will behaviorally comply with them. Assuming that at some point, every safety management system will need to be examined and realigned to help prevent incidents on the job, it is important to understand how personality traits can impact workers' risk-based decisions. Such work has been done in the mining industry due to its characteristically high risks and the results can be gleaned to help the process industry realign goals and values with their workforce. In the current study, researchers cross-sectionally surveyed 1,334 miners from 20 mine sites across the United States, varying in size and commodity. The survey sought to understand how mineworkers' risk avoidance could impact their near miss incidents on the job – a common precursor to lost-time incidents. Multiple regressions showed that as a miner's level of risk avoidance increased by 1 unit in the 6-point response scale, the probability of experiencing a near miss significantly decreased by 30% when adjusting for relevant control variables. Additionally, a significant interaction between risk avoidance and locus of control suggested that the effect of risk avoidance on near misses is enhanced as a miner's locus of control increases. A one-unit increase in locus of control appends the base effect of risk avoidance on near misses with an additional 8% decrease in the probability. Findings are discussed from a near-miss safety management system perspective in terms of methods to foster both risk avoidance and locus of control in an effort to reduce the probability of near misses and lost time at the organizational level within the process industry and other high-hazard industries.     

Psychosocial risks in small enterprises: the mediating role of perceived working conditions in the relationship between enterprise size and workers’ anxious or depressive episodes

Purpose. The relationship between enterprise size and psychosocial working conditions has received little attention so far but some findings suggest that conditions are more favorable in small enterprises. This could have a positive impact on workers’ mental health. The objective of this study was to test the mediating effect of perceived working conditions in the relationship between enterprise size and anxious or depressive episodes. Methods. Data from the 2010 SUMER – Surveillance Médicale des Expositions aux Risques professionnels (French periodical cross-sectional survey) were analyzed; N?=?31,420 for the present study. Anxious or depressive episodes were measured with the hospital anxiety and depression scale and the perceived working conditions were psychological demand, decision latitude and social support as assessed with Karasek's job content questionnaire. The indirect effect was tested according to the method proposed by Preacher and Hayes. Results. In a multivariate logistic regression, the risk of anxious or depressive episodes was found to be lower in micro enterprises (2–9 employees). Formal tests pointed to a significant indirect effect of enterprise size on mental health through perceived working conditions, with a larger effect for psychological demand. Conclusion. This study highlights perceived working conditions as an explanation of the effects of enterprise size.     

Indices of ergonomic-psycholsociological workplace quality in the greenhouses of Almería (Spain): Crops of cucumbers,peppers, aubergines and melons

This work uses the Labour Economics and Sociology Laboratory of France (LEST) method to evaluate the ergonomic-psycholsociological quality of work in horticultural greenhouse exploitations in Almería (Spain) with the aim of improving workers’ occupational health. Data on the factors affecting the physical environment, the physical workload, mental workload, psychosocial aspects and the working hours of labourers were collected in 110 greenhouses, 35 of the Almeria parral-plano type and 75 of the raspa y amagado type. The crops raised in these greenhouses were cucumbers (24 greenhouses), peppers (25), aubergines (28), and melons (38). These greenhouses, typical of southeastern Spain, were found not to guarantee workers a comfortable working environment. The type of greenhouse and the crop raised within directly affected the ergonomic-psychosocial conditions of the workers. Suggestions are offered that might improve these conditions.     

Safety climate dimensions,leader–member exchange,and organizational support as predictors of upward safety communication in a sample of rail industry workers

The freedom employees feel to communicate safety concerns with their supervisors, termed upward safety communication, has been shown to be related to adverse safety events (Hofmann and Morgeson, 1999). Research to date has demonstrated that good supervisor–employee relationships (leader–member exchange), a sense that the organization values an employee (perceived organizational support) and safety climate (including perceived management attitudes toward safety, job demands interfering with safety, and pressure from coworkers to behave safely) all contribute to employees’ comfort in bringing up safety issues with their supervisors. However, little is known about which specific dimensions of safety climate are most predictive of upward safety communication. Using a sample of 548 railway workers, we found that when all factors were considered simultaneously using dominance analysis, the dominant factor predicting upward safety communication was perceived management attitudes toward safety, followed by job demands interfering with safety and then leader–member exchange. Implications for research and practice are discussed.     

Effects of controller-pilot communication medium,flight phase and the role in the cockpit on pilots’ workload and situation awareness

This study explores the effects of communication medium, flight phase, and the role in the cockpit on pilots’ workload and situation awareness. Eight pilots with the experience of Controller-Pilot Data Link Communications (CPDLCs) participated in this simulated experiment. Two types of communication medium (voice and datalink), three types of flight phase (departure, cruise, and arrival), and two types of role (pilot flying and pilot non-flying) were investigated in the experiment. The results indicated that flight phase is a significant factor and cruise is the most suitable phase for datalink use on pilots’ acceptance, workload, and situation awareness performance. Both medium and role were not the significant factors. Since there is no significant difference on medium when no extra tasks and interferences involved in a normal flight, that the use of CPDLC can be justified during all phases of a no-event flight. In addition, the results of usability indicated that the simulated CPDLC with command selection functions proposed in this study provides good utility for the participants. In order to use the CPDLC for all phases of flight in the future, adding more command selection functions in place of typing messages by pilots and accommodating appropriate interfaces for different phases are recommended to enhance the usability of the CPDLC unit.