Characterization of uranium and plutonium containing particles originating from the nuclear weapons accident in Thule, Greenland, 1968

To improve long-term radioecological impact assessment for the contaminated ecosystem of Bylot Sound, Greenland, U and Pu containing particles have been characterized with respect to particle size, elemental distribution, morphology and oxidation states. Based on scanning electron microscopy with XRMA, particles ranging from about 20 to 40 microm were isolated. XRMA and mu-XRF mapping demonstrated that U and Pu were homogeneously distributed throughout the particles, indicating that U and Pu have been fused. Furthermore, mu-XANES showed that U and Pu in the particles were present as mixed oxides. U was found to be in oxidation state IV whereas Pu apparently is a mixture of Pu(III) and Pu(IV). As previous assessments are based on PuO2 only, revisions should be made, taking Pu(III) into account.     

Size-fractionated plutonium isotopes in a coastal environment

We have examined the distribution of individual Pu isotopes (239Pu, 240Pu, and 241Pu) in seawater from the Gulf of Maine (GOM). Samples were size-fractionated with a 1 kD cross-flow ultrafiltration (CFF) membrane. Subfractioned samples were radiochemically purified and Pu isotopes were analyzed using a three-stage thermal ionization mass spectrometer (TIMS). To our knowledge, this is the first time that both size class and Pu isotopic data have been obtained for seawater samples. Within measurement uncertainties a single 240Pu/239Pu atom ratio of 0.18 was found for all sample collection depths and sample size fractions. This signifies a current, single Pu source in GOM waters, namely global fallout, and suggests that no measurable isotopic fractionation occurred during CFF processing. The majority of Pu was found in the low molecular weight fraction (< 1 kD). Colloidal Pu varied from 8% of the total in surface waters to < 1% in the deepest (250 m) seawater sample. Evidence suggests that the vertical distribution of Pu in GOM is primarily controlled by conservative mixing processes. The high Pu fraction found in the low molecular size fraction implies that most of the Pu is in the non-particle-reactive oxidized fraction, and is consistent with the conservative Pu behavior. The activity levels are in agreement with other studies which show a slow decrease in Pu with time due to continued mixing and relatively slow particle removal.     

Isotopic composition and origin of uranium and plutonium in selected soil samples collected in Kosovo

Soil samples collected from locations in Kosovo where depleted uranium (DU) ammunition was expended during the 1999 Balkan conflict were analysed for uranium and plutonium isotopes content (234U, 235U, 236U, 238U, 238Pu, (239 + 240)Pu). The analyses were conducted using gamma spectrometry (235U, 238U), alpha spectrometry (238Pu, (239 + 240)Pu), inductively coupled plasma-mass spectrometry (ICP-MS) (234U, 235U, 236U, 238U) and accelerator mass spectrometry (AMS) (236U)). The results indicated that whenever the U concentration exceeded the normal environmental values (approximately 2 to 3 mg/kg) the increase was due to DU contamination. 236U was also present in the released DU at a constant ratio of 236U (mg/kg)/238U (mg/kg) = 2.6 x 10(-5), indicating that the DU used in the ammunition was from a batch that had been irradiated and then reprocessed. The plutonium concentration in the soil (undisturbed) was about 1 Bq/kg and, on the basis of the measured 238Pu/(239 + 240)Pu, could be entirely attributed to the fallout of the nuclear weapon tests of the 1960s (no appreciable contribution from DU).     

Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

Resolving Chernobyl vs. global fallout contributions in soils from Poland using Plutonium atom ratios measured by inductively coupled plasma mass spectrometry

Plutonium in Polish forest soils and the Bór za Lasem peat bog is resolved between Chernobyl and global fallout contributions via inductively coupled plasma mass spectrometric measurements of 240Pu/230Pu and 241Pu/239Pu atom ratios in previously prepared NdF3 alpha spectrometric sources. Compared to global fallout, Chernobyl Pu exhibits higher abundances of 240Pu and 241Pu. The ratios 240Pu/230Pu and 241Pu/239Pu co-vary and range from 0.186 to 0.348 and 0.0029 to 0.0412, respectively, in forest soils (241Pu/239Pu = 0.2407 x [240Pu/239Pu] - 0.0413; r2 = 0.9924). Two-component mixing models are developed to apportion 239+240Pu and 241Pu activities; various estimates of the percentage of Chernobyl-derived 239+240Pu activity in forest soils range from < 10% to > 90% for the sample set. The 240Pu/230Pu - 241Pu/239Pu atom ratio mixing line extrapolates to estimate 241Pu/239Pu and the 241Pu/239+240Pu activity ratio for the Chernobyl source term (0.123 +/- 0.0007; 83 +/- 5; 1 May 1986). Sample 241Pu activities, calculated using existing alpha spectrometric 239+240Pu activities, and the 240Pu/230Pu and 241Pu/239Pu atom ratios, agree relatively well with previous liquid scintillation spectrometry measurements. Chernobyl Pu is most evident in locations from northeastern Poland. The 241Pu activities and/or the 241Pu/239Pu atom ratios are more sensitive than 240Pu/239Pu or 238Pu/239+240Pu activity ratios at detecting small Chernobyl 239+240Pu inputs, found in southern Poland. The mass spectrometric data show that the 241Pu activity is 40-62% Chernobyl-derived in southern Poland, and 58-96% Chernobyl in northeastern Poland. The Bór za Lasem peat bog (49.42 degrees N, 19.75 degrees E), located in the Orawsko-Nowotarska valley of southern Poland, consists of global fallout Pu.     

Characterization of Pu concentration and its isotopic composition in soils of Gansu in northwestern China

The total ^239+240Pu activities and ²⁴⁰Pu/²³⁹Pu atom ratios in surface soil samples (0–5 cm) in the Kumtag Desert in western Gansu Province, and in a soil core sample in Lanzhou were investigated using a sector-field ICP-MS. In the surface soil samples, ^239+240Pu activities in fine particles (<150 μm) were 1.3–2.1 times of those in coarse particles (150 μm–1 mm) which ranged from 0.005 to 0.157 mBq/g. Atom ratios of ²⁴⁰Pu/²³⁹Pu in the surface soils ranged from 0.168 to 0.192 with a mean of 0.182 ± 0.008. The mean ratio was similar to the typical global fallout value although the Kumtag Desert was believed to have received close-in fallout derived from Chinese nuclear weapons tests mainly conducted in the 1970s. Furthermore, the mean ²⁴⁰Pu/²³⁹Pu atom ratio observed in the soil core sample in Lanzhou was similar to the typical global fallout value. In the soil core sample, ^239+240Pu activities in the various layers ranged from 0.012 to 0.23 mBq/g, and the inventory of ^239+240Pu (32.4 Bq/m², 0–23 cm) was slightly lower than that expected from global fallout (42 Bq/m²) at the same latitude. Rapid downward migration of Pu isotopes was observed in Lanzhou soil core sample layers. The contribution of the 10-cm deep top layers of surface soils to total inventory was only 17%, while the contribution of deeper layers (10–23 cm) was as high as 83%. The ^239+240Pu activity levels and ²⁴⁰Pu/²³⁹Pu atom ratios in soils in Gansu Province, China are similar to those in atmospheric deposition samples collected in the spring in recent years in Japan.     

Separation and measurement of thorium, plutonium, americium, uranium and strontium in environmental matrices

A technique for the isolation of thorium (Th), plutonium (Pu), americium (Am), uranium (U) and strontium (Sr) isotopes from various environmental matrices has been adapted from a previously published method specific to water samples (Maxwell, 2006). Separation and isolation of the various elemental fractions from a single sub-sample is possible, thereby eliminating the need for multiple analyses.The technique involves sample dissolution, concentration via calcium phosphate co-precipitation, rapid column extraction using TEVA™, TRU™ and Sr-Spec™ resin cartridges, alpha spectrometry for Th, Pu, U and Am and Cerenkov counting for Sr.Various standard reference materials were analysed and chemical yields are in the range of 70-80% for Th, Am, U and Sr and 50-60% for Pu. Sample sizes of up to 10 L for water, 5 g for dry soil and sediment and 10 g for dry vegetation and seaweed can be processed using this technique.     

Characterization of plutonium in deep-sea sediments of the Sulu and South China Seas

Anthropogenic Pu isotopes are important geochemical tracers for sediment studies. Their distributions and sources in the water columns as well as the sediments of the North Pacific have been intensively studied; however, information about Pu in the Southeast Asian seas is limited. To study the isotopic composition of Pu, and thus to identify its sources, we collected sediment core samples in the South China Sea and the Sulu Sea during the KH-96-5 Cruise of the R/V Hakuho Maru. We analysed the activities of ^239+240Pu and the atom ratios of ²⁴⁰Pu/²³⁹Pu using isotope dilution sector-field inductively coupled plasma mass spectrometry (SF-ICP-MS). The ²⁴⁰Pu/²³⁹Pu atom ratios in the sediments of both areas (inventory weighted mean: 0.251 for the South China Sea and 0.280 for the Sulu Sea) were higher than the global fallout value (0.178 ± 0.019), suggesting the existence of Pu from the Pacific Proving Grounds in the North Pacific. Low inventories of ^239+240Pu in sediments were observed in the South China Sea (3.75 Bq/m²) and the Sulu Sea (1.38 Bq/m²). Most of the Pu input is still present in the water column. Scavenging and benthic mixing processes were considered to be the main processes controlling the distribution of Pu in the deep-sea sediments of both study areas.     

The mass spectrometric determination of fallout 239Pu and 240Pu in marine samples

A thermal ionization mass spectrometric technique is presented for the detection of ²³⁹Pu and ²⁴⁰Pu in sea water, pore water, ocean sediments, sediment trap samples and coral samples. Both sample preparation and purification procedures, as well as the procedure used to detect Pu by mass spectrometry (m.s.), are presented. The m.s. technique proves to be over an order-of-magnitude more sensitive than traditional alpha-counting techniques for the detection of Pu in environmental samples. Also, the ratio of ²⁴⁰Pu/²³⁹Pu is obtained with this technique.     

Depleted uranium particles in selected Kosovo samples

Selected soil samples, collected in Kosovo locations where DU ammunition was expended during the 1999 Balkan conflict, have been investigated by secondary ion mass spectrometry (SIMS), X-ray fluorescence imaging using a micro-beam (micro-XRF) and scanning electron microscopy equipped with an energy dispersive X-ray fluorescence detector (SEM-EDXRF), with the objective to test the suitability of these techniques to identify the presence of small DU particles and measure their size distribution and the 235U/238U isotopic ratio (SIMS). Although the results do not permit any legitimate extrapolation to all the sites hit by the DU rounds used during the conflict, they indicated that there can be "spots ' where hundreds of thousands of particles may be present in a few milligrams of DU contaminated soil. The particle size distribution showed that most of the DU particles were <5 microm in diameter and more than 50% of the particles had a diameter <1.5 microm. Knowledge on DU particles is needed as a basis for the assessment of the potential environmental and health impacts of military use of DU, since it provides information on possible re-suspension and inhalation.     

240Pu/239Pu atom ratios in seawater from Sagami Bay, western Northwest Pacific Ocean: sources and scavenging

Seawater samples were collected in Sagami Bay, western Northwest Pacific Ocean, and their (239+240)Pu activities and (240)Pu/(239)Pu atom ratios were determined by alpha-spectrometry and sector field high-resolution ICP-MS. A few samples also were analyzed for (137)Cs activities. The (239+240)Pu inventory of 41.1 Bq m(-2) was equivalent to the expected cumulative deposition density of atmospheric global fallout at the same latitude and this inventory was considerably lower than inventories in the underlying sediment columns. This result indicated that a significant amount of (239+240)Pu has been removed into the underlying sediments through enhanced scavenging from the water column by the high fluxes of particles in this region. The atom ratio of (240)Pu/(239)Pu showed no notable variation from the surface to the bottom; the average value was 0.234+/-0.004. This atom ratio was significantly higher than the mean global fallout ratio of 0.18, proving the existence of close-in fallout plutonium originating from the Pacific Proving Grounds (PPG). The relative contributions of the global stratospheric fallout and the PPG close-in fallout were evaluated by using the two end-member mixing model. The contribution of the PPG close-in fallout was estimated to be 15.2 Bq m(-2), which corresponded to 37% of the (239+240)Pu inventory in the water column. Thus (239)Pu and (240)Pu from the two sources of global fallout and close-in fallout have been homogenized in the water masses in the western Northwest Pacific margin during the past three decades.     

Depth profile of ²³⁶U/²³⁸U in soil samples in La Palma, Canary Islands

The vertical distribution of the ²³⁶U/²³⁸U isotopic ratio was investigated in soil samples from three different locations on La Palma (one of the seven Canary Islands, Spain). Additionally the ²⁴⁰Pu/²³⁹Pu atomic ratio, as it is a well establish tool for the source identification, was determined. The radiochemical procedure consisted of a U separation step by extraction chromatography using UTEVA^® Resin (Eichrom Technologies, Inc.). Afterwards Pu was separated from Th and Np by anion exchange using Dowex 1x2 (Dow Chemical Co.). Furthermore a new chemical procedure with tandem columns to separate Pu and U from the matrix was tested. For the determination of the uranium and plutonium isotopes by alpha spectrometry thin sources were prepared by microprecipitation techniques. Additionally these fractions separated from the soil samples were measured by Accelerator Mass Spectrometry (AMS) to get information on the isotopic ratios ²³⁶U/²³⁸U, ²⁴⁰Pu/²³⁹Pu and ²³⁶U/²³⁹Pu, respectively. The ²³⁶U concentrations [atoms/g] in each surface layer (∼2 cm) were surprisingly high compared to deeper layers where values around two orders of magnitude smaller were found. Since the isotopic ratio ²⁴⁰Pu/²³⁹Pu indicated a global fallout signature we assume the same origin as the probable source for ²³⁶U. Our measured ²³⁶U/²³⁹Pu value of around 0.2 is within the expected range for this contamination source.     

Artificial radionuclides in the atmosphere over Lithuania

Measurements of airborne radioactive aerosol concentration were carried out on the basis of 1-3 days samples after the Chernobyl disaster and during the period of 1992-2003. Transport of "hot" particles of different composition resulted in the high activity concentrations of (137)Cs, (238)Pu, (239,240)Pu and (241)Am in the atmosphere in Vilnius at the end of April 1986. The (240)Pu/(239)Pu atom ratio showed clear evidence of non-global plutonium originating from the Chernobyl accident in the atmosphere over Lithuania. The (240)Pu/(239)Pu atom ratio ranged from 0.14 to 0.40 in monthly samples in Vilnius in 1995-2003. An increase in activity concentration of (137)Cs by a factor of 100 (up to 300 microBq/m(3)) was found following forest fires in the Ukraine and Belarus. However, no transport of the Chernobyl plutonium was observed and the (240)Pu/(239)Pu atom ratio in samples collected during the forest fires was found to be 0.229 and 0.185, respectively. The exponential decrease in the (240)Pu/(239)Pu atom ratio from 0.30 to 0.19 (mean values) was observed in 1995-2003.     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Oxidation states of uranium in depleted uranium particles from Kuwait

The oxidation states of uranium in depleted uranium (DU) particles were determined by synchrotron radiation based mu-XANES, applied to individual particles isolated from selected samples collected at different sites in Kuwait. Based on scanning electron microscopy with X-ray microanalysis prior to mu-XANES, DU particles ranging from submicrons to several hundred micrometers were observed. The median particle size depended on sources and sampling sites; small-sized particles (median 13 microm) were identified in swipes taken from the inside of DU penetrators holes in tanks and in sandy soil collected below DU penetrators, while larger particles (median 44 microm) were associated with fire in a DU ammunition storage facility. Furthermore, the (236)U/(235)U ratios obtained from accelerator mass spectrometry demonstrated that uranium in the DU particles originated from reprocessed fuel (about 10(-2) in DU from the ammunition facility, about 10(-3) for DU in swipes). Compared to well-defined standards, all investigated DU particles were oxidized. Uranium particles collected from swipes were characterized as UO(2), U(3)O(8) or a mixture of these oxidized forms, similar to that observed in DU affected areas in Kosovo. Uranium particles formed during fire in the DU ammunition facility were, however, present as oxidation state +5 and +6, with XANES spectra similar to solid uranyl standards. Environmental or health impact assessments for areas affected by DU munitions should therefore take into account the presence of respiratory UO(2), U(3)O(8) and even UO(3) particles, their corresponding weathering rates and the subsequent mobilisation of U from oxidized DU particles.     

High-resolution alpha spectrometry under field conditions - fast identification of alpha particle emitting radionuclides from air samples

Alpha particle emitting radionuclides may be released into the atmosphere as a result of a severe nuclear accident, the malevolent use of radioactive material or some other incident. Rapid detection methods are then of crucial importance for carrying out well-timed protective actions. The present paper demonstrates that a method in which an aerosol sample is collected on a filter and directly analysed by high-resolution alpha spectrometry in a vacuum chamber, but without radiochemical sample treatment, is suitable for field measurements. A detection limit of less than 0.1 Bqm(-3) for (239)Pu is achieved assuming 1-h sampling using a glass-fibre filter and 1-h data acquisition. This value is higher than in the case when sampling is performed using a porous membrane filter. A measurement system consisting of standard components is mounted in a vehicle designed for rapid field measurements.     

Particle and solution phase depth distributions of transuranics and 55Fe in the North Pacific

In situ large volume filtration and chemisorption techniques were used to collect samples from the North Pacific for radiochemical analyses of fallout transuranics and ⁵⁵Fe in filterable and filtered phases. The data cover several locations for surface collections and a detailed depth profile north of Hawaii at 30°N. The observed partition of these nuclides between suspended particulate and filtered phases is directly linked to the rates at which they are moved downward through the water column in association with sinking particles. Particulate phases in open ocean surface waters contain higher Pu (12–35%) than subsurface particulates (which average about 6%). ²⁴¹Am was found to exhibit much stronger particle association—typically close to 50% in both surface and subsurface waters—in accord with its known greater particle reactivity. In the high Pu deep water layer, particle associated Pu dropped to close to 1% of total Pu concentration. Together with a correlated increase in the proportion of oxidized Pu in this layer close to the sediment-water interface, this is taken as clear evidence of remobilization Pu from particles at, or near to, the interface. ⁵⁵Fe distributions on filtered particulates indicate a much deeper depth distribution relative to the transuranics. This may reflect both a higher particle association reactivity in respect to scavenging and a longer exposure history to scavenging (especially relative to ²⁴¹Am—produced by in situ decay).     

Radioactivity in trinitite six decades later

The first nuclear explosion test, named the Trinity test, was conducted on July 16, 1945 near Alamogordo, New Mexico. In the tremendous heat of the explosion, the radioactive debris fused with the local soil into a glassy material named Trinitite. Selected Trinitite samples from ground zero (GZ) of the test site were investigated in detail for radioactivity. The techniques used included alpha spectrometry, high-efficiency gamma-ray spectrometry, and low-background beta counting, following the radiochemistry for selected radionuclides. Specific activities were determined for fission products (90Sr, 137Cs), activation products (60Co, 133Ba, 152Eu, 154Eu, 238Pu, 241Pu), and the remnants of the nuclear fuel (239Pu, 240Pu). Additionally, specific activities of three natural radionuclides (40K, 232Th, 238U) and their progeny were measured. The determined specific activities of radionuclides and their relationships are interpreted in the context of the fission process, chemical behavior of the elements, as well as the nuclear explosion phenomenology.     

Sector field inductively coupled plasma mass spectrometry, another tool for plutonium isotopes and plutonium isotope ratios determination in environmental matrices

The transfer of radio nuclides into the different compartments of the environment are widely studied and leads to the elaboration of transfer models in order to evaluate potential impact onto the environment and humans. Accurate experimental data are needed to validate these models for all types of matrices (air, water, sediments, soils, biota and food...). Among these radionuclides, 238Pu, 239Pu, 240Pu and 241Pu, are often mentioned. They have been released into the environment by nuclear weapon tests, nuclear facilities, reactors or satellite accidents. These different sources have different 240Pu/239Pu ratios and therefore this ratio is used to provide information on the source of contamination into the environment. The most conventional analytical tools used for plutonium isotope determination are liquid scintillation and alpha spectrometry, and thermal ionisation mass spectrometry (TIMS) is still considered as the primary method for determination of plutonium isotope ratios. During the last decade, mass spectrometers equipped with plasma ion sources and sector field analysers were developed and can offer now another alternative method for the accurate determination of isotope content and ratios of long-lived radionuclides in environmental samples. This paper presents and discusses the results obtained for 239Pu, 240Pu and 241Pu content and isotope ratios by sector field ICP-MS in different environmental matrices.     

Deposition and distribution of Chernobyl fallout fission products and actinides in a Russian soil profile

In this article the distribution of fission products and actinides in a soil profile from Novo Bobovicky in Russia, which was contaminated due to the Chernobyl nuclear power plant accident, is described. The ground deposition of long-lived fission products determined by gamma-spectrometry was (recalculated to 26 April 1986) 1600 kBq (137)Cs/m(2), 900 kBq (134)Cs/m(2) and 60 kBq (125)Sb/m(2). Of these radionuclides (137)Cs shows the dominating activity at the present time. After 6.5 years 90% of the Cs and Sb activity was contained in the upper 4 cm. A (239,240)Pu ground deposition of 77.4+/-8.0 Bq/m(2) was determined by alpha-spectrometry. The (238)Pu/(239,240)Pu activity ratio of 0.30+/-0.03 and (241)Pu/(239,240)Pu activity ratio of 115+/-14 (in 1986) measured in the soil profile, indicates that the analysed Pu originates mainly from the Chernobyl accident. The average (234)U/(238)U activity ratio of 1.06+/-0.29 indicates that the uranium in this soil is dominated by naturally occurring uranium.The alpha- and beta-autoradiography revealed that the activity is mainly present in particulate form. It could further be observed that the spots containing alpha- or beta-activity originated from different particles. A comparison of alpha-autoradiography with the bulk Pu and Am activity showed that 92% of the alpha-activity was present as clearly detectable alpha-spots.The beta-active particles, located by beta-autoradiography were correlated with gamma-spectrometric measurements and contained only (137)Cs. These hot spots ranged from 0.02 to 0.15 Bq.It could be concluded that the vertical transport of (137)Cs and fuel fragments occurs mainly by movement of particles through the soil. It could also be concluded that the fuel fragments found, in this soil were depleted in respect to Cs, Sb and Eu.Comparison of the analysed (238)Pu/(239,240)Pu, (241)Pu/(239,240)Pu and (241)Am/(239,240)Pu ratios with the ratios calculated with ORIGEN-S code gave an estimate of the average burn-up of the fuel particles to be in the range of 11-12 GWd/tU.The results presented in this article are valid for this single soil profile and should not be generalised unless validated in a more rigorous study of a larger number of soil profiles.