PCDD/Fs, dioxin-like PCBs and marker PCBs in eggs of peregrine falcons from Germany

Thirty one egg samples of peregrine falcons were collected in different regions of Germany (South-West, North and East) and analysed for PCDD/Fs, PCBs and marker PCBs. Altogether, 37 PCB congeners were determined, allowing a more detailed discussion of different aspects of the relative importance of these individual congeners. For comparison with dioxin data from other studies, differences between toxic equivalency factors (TEF) have to be taken into consideration. The results of this study are discussed on the basis of WHO-TEFs for birds published in 1998. All samples showed high levels of PCDD/Fs (median of all samples: 368 pg WHO-PCDD/F-TEQ/g fat; range 137-1453) and even higher levels of PCBs (median 967 pg WHO-PCB-TEQ/g fat; range 243-7482). The upper range of these levels reach concentrations found at the beginning of the Belgian dioxin crisis when a significant reduction in hens' egg hatchability was observed. The relative contribution of PCBs to the total TEQ is on average 71% (range 55-92%) with a tendency to higher values in South-West Germany compared to different sites in East Germany or one site in northern Germany. Within a region, a wide range of contamination can be found. Even in the same cities (Stuttgart and Ludwigshafen), results derived from eggs collected in the same year (2003) varied by factors 5-10. These findings show the high degree of variation occurring even within the same kind of biological matrix. Therefore, to allow for comparison of regions or time trends, a considerable number of samples has to be analysed.     

Estimation of effects of dioxins and dioxin-like PCBs on wildlife population--a case study on common cormorant

We presented a method for quantitatively evaluating the effects of chemical pollutants in the environment on a wildlife population. We expressed the effects of exposure to dioxins and dioxin-like PCBs in Tokyo Bay sediment on a common cormorant (Phalacrocorax carbo) population in two ways. One was the changes in the intrinsic growth rate, and the other was the changes in the gross population size. The effects of exposure to the compounds were estimated by using the method of population ecology and available field data. Common cormorant population at Shinobazu Pond in Tokyo, Japan during 1974-1986 was selected as the target population. Intrinsic growth rate or gross size of the population based on the calculated residual level of dioxins and dioxin-like PCBs in the period was estimated to decrease to 89% or 85% of that without exposure to the compounds, respectively.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Levels of dioxins and dioxin-like PCBs in food samples on the Greek market

Food intake is the main source of exposure to dioxin-like compounds for humans. The results of a surveillance programme on polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and co-planar polychlorinated biphenyls (co-PCBs) in 77 food samples from the Greek market and producers are presented. The study included the analyses of milk and dairy products, meat and meat products, fish, vegetable oil, eggs, fruit, vegetable and rice collected between August and December 2002. After extraction, extracts were cleaned up on a series of carbon column chromatography, silica gel, alumina chromatography, and then analysed by high resolution gas chromatography/high resolution mass spectrometry. All samples had a dioxin content far below the EC Regulation (2375/2001/EC) limits.     

Selection of non-dioxin-like PCBs for in vitro testing on the basis of environmental abundance and molecular structure

The non-dioxin-like polychlorinated biphenyls (NDL-PCBs) constitute the major proportion of PCBs found in food and human tissues. It is important to improve our understanding of the toxicity, environmental and human risks associated with the NDL-PCBs, since their toxicology is incompletely characterized and a human health risk assessment is required. This paper discusses the selection of a training set of 20 tri- to hepta-chlorinated biphenyls, PCBs 19,28,47,51,52,53,74,95,100,101,104,118,122,128,136,138,153,170,180, and 190. Suggested for comprehensive screening using in vitro assays to identify critical mechanisms of toxicological action. The selected PCBs form a balanced basis for developing of quantitative structure-activity relationship (QSAR) models for prediction of physicochemical and toxicological properties of non-tested PCB congeners. Chemical and physical properties, environmental abundance and toxicological activities of the congeners were considered during the selection process. A complementary set of PCBs, a reference set, was selected using D-optimal onion design including PCBs 18,20,28,30,37,40,50,54,60,77,82,99,122,132,153,161,170,188,192, and 193. Congeners of this set are well suited for validation of QSAR models developed using the training set. For visualization of the chemical diversity of environmentally abundant PCBs and congeners of the training and reference sets, principal component analysis (PCA) was used. Statistical molecular design was used to verify the structural representation. As a reference structure for dioxin-like PCBs, PCB 126 was added in the training set. The selected set of NDL-PCBs is proposed for use in toxicological testing programs to provide rational basis for risk assessment of the NDL-PCBs.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

PCDD/Fs and dioxin-like PCBs in sediment and biota from the Mondego estuary (Portugal)

The concentrations of 17 polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs) were measured in sediment and key species as an initial investigation on PCDD/Fs and dl-PCBs contamination in the Mondego estuary (Portugal). The results demonstrated that the values of the total PCDD/Fs (∑PCDD/Fs) concentrations were considerably lower than those of the sum of dl-PCBs (∑dl-PCBs) in all the studied samples. Regarding the contribution of individual congeners, OCDD was the predominant PCDD/F and the mono-ortho PCB 118 and PCB 105 were the dominant PCBs in the majority of the samples. Our results suggest that PCDD/Fs and PCBs behave quite differently along the aquatic food web: ∑PCDD/Fs concentrations were lower in higher trophic-level organisms with fish presenting a distinct PCDD/Fs congeners profile; on the contrary, the higher ∑dl-PCBs values were found in upper-level biota, although not exclusively, and quite similar dl-PCBs congener profiles were observed in nearly all the studied species.     

Dietary intake of PCDD/Fs and dioxin-like PCBs from the Chinese total diet study in 2007

Concentrations of 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and 12 dioxin-like polychlorinated biphenyls (dl-PCBs) were measured in 96 food composite samples from eight varieties of food groups from the Chinese total diet study (TDS) in 2007. The concentrations of samples, expressed as WHO toxic equivalents (TEQ), ranged from 0.001 pg TEQ g^?1 to 0.85 pg TEQ g^?1 (fresh weight). Dietary intake of PCDD/Fs and dl-PCBs of 12 age/gender subgroups of the Chinese population subsequently estimated ranges from 15.4 pg TEQ kg^?1 bw month^?1 to 38.7 pg TEQ kg^?1 bw month^?1 for average population and from 68.5 pg TEQ kg^?1 bw month^?1 to 226.1 pg TEQ kg^?1 bw month^?1 for high consumers (the 97.5th percentile). Dietary exposure of children (mean: 32.5 pg TEQ kg^?1 bw month^?1) is significantly higher than that of the adults (mean: 21.5 pg TEQ kg^?1 bw month^?1) (p < 0.01) presumably due to more food consumed by children relative to their body weight compared to adults. There is no difference of dietary exposure, expressed as pg TEQ kg^?1 bw, found between different genders. Across various regions in China, there are large differences of dietary exposure of adult population and pattern of contribution of food groups to total exposure due to different contamination level and food habits. Dietary exposures of average population of various subgroups were all below the PTMI recommended by JECFA, but those of higher consumers were found exceeding or comparable to the PTMI.     

Empirical relationship between precision and ultra-trace concentrations of PCDD/Fs and dioxin-like PCBs in biological matrices

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.     

PCDD/Fs and dioxin-like PCBs in human milk and estimation of infants' daily intake: a review

This paper reviews the recent scientific literature on PCDDs, PCDFs and dioxin-like PCBs in human milk. All the papers reporting levels of these contaminants in human breast milk published from January 2000 to January 2009 and available on the www.sciencedirect.com web site were identified and included. The aim was (1) to study levels of PCDDs, PCDFs and PCBs in human milk in mothers from different geographical areas and assess infant exposure to these contaminants; (2) to study the effect of variables such as the mother’s age, number of deliveries, dietary and smoking habits and her own nutrition in infancy, and the environment, on levels of the contaminants in breast milk; (3) to study time patterns, and (4) to identify data gaps.     

Leaching characteristics of PCDDs/DFs and dioxin-like PCBs from landfills containing municipal solid waste and incineration residues

To investigate the leaching characteristic of persistent organic pollutants (POPs), such as non-ortho and mono-ortho substituted chlorobiphebyls (dioxin-like PCBs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs), in leachate from municipal solid waste (MSW) landfill sites containing incineration residues, raw leachate samples were collected twice from 12 selected MSW landfill sites. The samples were divided into their liquid and solid phases using GF/B (pore size 1.0 microm), and the concentrations of POPs then determined. The concentrations of PCDDs/DFs ranged from 0.65 to 5.88 pg-TEQ/l (average 2.86 pg-TEQ/l), and those of dioxin-like PCBs from 0.05 to 0.32 pg-TEQ/l (average 0.18 pg-TEQ/l). The major congeners of leached PCDDs/DFs and dioxin-like PCBs in liquid and solid phases were OCDD (about 60%), 2,3',4,4',5-PeCBs (about 30%), and 2,3,4,4',5-PeCBs (about 54%). The relationship between landfill age and the leaching concentration of PCDDs/DFs, and effects of dissolved organic carbon (DOC) on the leaching of PCDDs/DFs are also discussed. Finally, a leaching prediction model of PCDDs/DFs from MSW landfills has been suggested using parameters, such as hydrophobic neutral organic carbons, total dissolved solid, and the ratio of non-biodegradable wastes in landfill sites.     

Risk assessment of dioxins and dioxin-like PCBs in food--comments by the German Federal Environmental Agency

Human health risk assessments for dioxins and dioxin-like PCBs (with the exception of the one by US-EPA) recommend health based exposure limits within the range of 1-4 pg WHO-TEQ/kg bw per day. As all humans are exposed to measurable levels of dioxins and related substances, the determination of the tolerated daily intake is a very significant decision and may influence limit values guiding risk reduction measures and target levels. The proposed TDI has to protect all human subpopulations. In the case of dioxin this is particularly important as the exposure of infants through breast-feeding may exceed the exposure of adults by one or two orders of magnitude. An overview of recently recommended limit values (WHO, SCF, JECFA) for PCDDs, PCDFs and dioxin-like PCBs using WHO-TEFs shows the common feature that the values were derived only from non carcinogenic endpoints. In November 2000 the Scientific Committee on Food of the European Commission published an 'Opinion of the SCF on the Risk Assessment of Dioxins and Dioxin-like PCBs in Food' [SCF, Scientific Committee on Food 2000. Opinion of the SCF on the risk assessment of dioxins and dioxin-like PCBs in food. European Commission, Brussels, Adopted on November 2000 http://europa.eu.int/comm/food/fs/sc/scf/out78_en.pdf]. On the basis of this extensive review of data and experimental results the Committee recommended a temporary tolerable weekly intake (t-TWI) of 7 pg WHO-TEQ/kg bw. Only six months later the SCF carried out a re-evaluation of its t-TWI from November 2000. The reconsideration of 'pivotal studies' led to the situation that the re-assessment is now based only on rat studies which investigated only reproductive effects only on male offspring and, in addition, three of these studies are single dose studies at gestational day 15. Applying an overall uncertainty factor of 10 to the LOAEL derived estimated human daily intakes (EHDI) the SCF concluded that 14 pg/kg bw per week should be considered as a tolerable intake for 2,3,7,8-TCDD. The SCF stated that on a body weight basis, the dioxin intake of breast-fed infants has been estimated to be one to two orders of magnitude higher than the average adult intake. Recent German data suggest that the body burden of formerly breast-fed children aged 9-11 is still about 30% higher than those of their formula-fed age-mates. As breast-feeding has measurable benefits for neurological and immunological development, formula feeding cannot be recommended as an alternative to lower dioxin intake. So the only remaining way to lower the dioxin uptake is to drastically reduce the background exposure of the general population. It is acknowledged that any recommendation of a precise number for a TDI is flawed by uncertainties and the possibility of different weight being given to the studies of relevance. The determination of the TDI has influence on all regulatory limit values that are based on the TDI value. A higher TDI lowers the level of protection for humans. It is proposed by the German Federal Environmental Agency that the TDI should be reassessed in a process transparent to the public and on the basis of all relevant endpoints from animal experiments and human epidemiology, including the assessment of cancer risks.     

Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other organic micropollutants were determined in dated sediment/soil cores collected from the flood-plain of the river Elbe near Pevestorf (PT), approximately 125 km upstream of Hamburg, and Heuckenlock (HL) in southeast of Hamburg. Concentrations of PCDD/Fs peaked sharply at PT in the 1950s and at HL at the end of the 1940s. Cluster analyses provide evidence that the region of Bitterfeld-Wolfen (about 350-400 km upstream of Hamburg) could be the source of the PCDD/F contamination existing in the cores PT and HL since the 1940s. Obviously it is caused by sediments of the river Elbe of a similar composition. Whereas the PCDD/Fs, HCHs (hexacyclohexane isomers), DDX (DDT, DDD, DDE), and tetrachlorinated ethers in PT and HL presumably originated predominantly from the Bitterfeld-Wolfen region, organotin compounds in HL and dichlorinated haloethers in HL during the 1940s and 1950s can probably largely be attributed to emissions from the Hamburg region. Although they are separated by a large distance, in both sediment cores PT and HL concentrations and composition patterns of most organic micropollutants analyzed widely match. Inductively it can be concluded that similar contaminations will be found in many of the river bank soils between the Bitterfeld-Wolfen region and Hamburg. Excavation of top soils may uncover highly contaminated materials. Since the dated sediment cores show the variation in contaminants in the Elbe sediments over a defined time period, it is possible to make an approximate assessment of the actual degree of contamination to be expected in areas where in previous decades contaminated dredged sediments from the Elbe and from the Port of Hamburg have been deposited on land and used for building plots or for agricultural purposes.     

Historical trends of PCDD/Fs and dioxin-like PCBs in sediments buried in a reservoir in Northern Taiwan

Polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF) and polychlorinated biphenyl (PCB) concentrations were analyzed at 1-2cm intervals in a sediment core collected from a reservoir in Northern Taiwan to evaluate the organic pollution history. The highest PCDD/F (14.4ng TEQ/kg d.w.) and PCB (0.261ng TEQ(WHO)/kg d.w.) concentrations were determined at 13-15cm (estimated year: 1992). The ages of the levels of sediment core were estimated from the sedimentation rate. Analysis results demonstrate that the PCDD/F concentration of the sediment core measured in the reservoir reached their peak when the municipal waste incinerators (MWIs) in the area started to operate. Furthermore, the decrease in sediment core PCDD/F concentration is related to the time of enforcement of the PCDD/F emission limit set by the Environmental Protection Administration (EPA) in Taiwan. Significant distribution of OCDD in homologue profiles was noted in archived soil samples in Taiwan in which the major input of PCDD/Fs was thought to be atmospheric. Major PCB congeners found in the sediment core were the major components of the commercial PCB products. Input fluxes of PCDD/Fs (5.75-158ng-I-TEQ/m(2)-yr) and PCBs (0.248-3.71ng TEQ(WHO)/m(2)yr) into the reservoir of interest are also calculated from the concentration and sedimentation rate of the sediment. The results reveal that considerable amounts of PCDD/Fs and PCBs were carried into the reservoir of interest in the flood stage but not during normal stage.     

Determination of PCDD/Fs and dioxin-like PCBs in fish oils for feed ingredients by congener-specific chemical analysis and CALUX bioassay

The present research was intended to determine the suitability of the CALUX assay as a screening method for dioxins in fish oil used as a feed ingredient in Japan. Alteration of TEQ in fish oil according to newly proposed toxic equivalency factors (TEF) is also discussed. In the analysis, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in 41 fish oil samples were determined by using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS) and CALUX bioassay. The mean TEQ values derived from 1998 WHO-TEF of PCDD/Fs and DL-PCBs were 2.6 and 9.9 pg g(-1) (ww), respectively. The levels of TEQ derived from the recently re-evaluated 2005 WHO-TEF were slightly lower than those of the former in both groups. Notably, the contribution of mono-ortho DL-PCBs to total 2005 WHO-TEQ was considerably decreased compared to the case of 1998 WHO-TEQ, resulting from the reduction in its TEF values, while the non-ortho DL-PCBs contribution was increased. The mean TEQ determined by CALUX assay for PCDD/Fs was approximately three times higher, whereas DL-PCBs was approximately two times lower than WHO-TEQ determined by HRGC/HRMS; the sum of PCDD/Fs and DL-PCBs was very similar by both methods. The correlation coefficients of TEQ between the CALUX assay and HRGC/HRMS analysis were 0.84, 0.89, and 0.90 for PCDD/Fs, DL-PCBs, and the sum, respectively. These results suggest that the CALUX assay is a very useful method for the screening of dioxin-related compounds in fish oils.     

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: correlation between the CALUX bioassay and GC-HRMS

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, the use of this technique in routine analysis of atmospheric deposition samples may be a valuable alternative for GC-HRMS. In this study, a validated CALUX method was used for the analysis of PCDD/Fs and dioxin-like PCBs in more than 90 atmospheric deposition samples for different locations in Flanders. The samples were taken in residential and agricultural areas, where a threshold limit of 21 pg WHO-TEQ m⁻² d⁻¹ for the sum of PCDD/Fs and dioxin-like PCBs was set, and in industrial zones and natural reserves, where no official threshold limit is available. The results from the Flemish measurement program showed correlation between CALUX and GC-HRMS for all the samples, originating from the different areas (R² of 0.81, 0.53 and 0.64 for dl-PCBs, PCDD/Fs and sum of both fractions, respectively). Median CALUX/GC-HRMS ratios of 2.0, 0.9 and 1.3 were reported for the PCDD/Fs, dioxin-like PCBs and the sum of both fractions, respectively. The results show that the CALUX bioassay is a valuable alternative tool for the classic GC-HRMS analysis of atmospheric deposition samples in the Flemish measurement network.     

Behavior of PCNs, PCDDs, PCDFs, and dioxin-like PCBs in the thermal destruction of wastes containing PCNs

In the first known study to characterize the emissions of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) from the thermal treatment of wastes containing PCNs, the formation and decomposition behavior of these pollutants was investigated both at laboratory scale and at plant scale. Exhaust gas measurements from laboratory-scale combustion of rubber belts containing PCNs (FB belts) were used as the basis for calculations predicting that the incremental dioxin toxic equivalency (TEQ) emissions from municipal solid waste (MSW) incinerators would be less than 0.1 ng/m3 N. In order to directly examine co-incineration of FB belts with MSW and to address potential differences between the laboratory experiment and full-scale MSW incinerators, experiments were conducted using a larger scale thermal treatment test facility with sampling and analysis at several points in the thermal treatment process. Congener specific analysis of PCNs clearly showed that both destruction and synthesis simultaneously occurred during combustion in the kiln. Most of the PCNs were destroyed by secondary combustion, and almost all PCNs were removed after flue gas treatment. Almost all PCDDs/DFs were synthesized as by-products of kiln combustion, most of them were destroyed by the secondary combustion, and almost all dioxins (PCDDs/DFs and dl-PCBs) were removed after flue gas treatment. The TEQ emission levels were less than 0.1 ng/m3 N for all plant-scale tests, and differences in TEQ emission levels were very small. Adding wastes containing PCNs to MSW will not influence thermal treatment emissions to the environment from modern solid waste incinerators.