Organo-modified sericite in the remediation of an aquatic environment contaminated with As(III) or As(V)

The aim of this investigation was to obtain the hybrid material precursor to the naturally and abundantly available sericite, a mica-based clay; the materials were further employed in the remediation of arsenic from aqueous solutions. The study was intended to provide a cost-effective and environmentally benign treatment technology. The hybrid organo-modified sericite was obtained using hexadecyltrimethylammonium bromide (HDTMA) and alkyldimethylbenzylammonium chloride (AMBA) organic surfactants by introducing regulated doses of HDTMA or AMBA. The materials were characterized using infrared and X-ray diffraction analytical data, whereas the surface morphology was discussed by taking its SEM images. These materials were employed to assess the pre-concentration and speciation of As(III) and As(V) from aqueous solutions. The batch reactor data showed that increasing the sorptive concentration (from 1.0 to 15.0 mg/L) and pH (i.e., pH 2.0 to 10.0) caused the percent uptake of As(III) and As(V) to decrease significantly. The kinetic data showed that a sharp initial uptake of arsenic reached its equilibrium state within about 50 min of contact time, and the sorption kinetics followed a pseudo-second-order rate law both for As(III) and As(V) sorption. A 1,000 times increase in the background electrolyte concentration, i.e., NaNO₃, caused a significant decrease in As(III) removal, whereas As(V) was almost unaffected, which inferred that As(III) was adsorbed, mainly by the van der Waals or even by the electrostatic attraction, whereas As(V) was adsorbed chemically and formed “inner-sphere” complexes at the solid/solution interface. The equilibrium state modeling studies indicated that the sorption data fitted well the Freundlich and Langmuir adsorption isotherms. Henceforth, the removal capacity was calculated under these equilibrium conditions. It was noted that organo-modified sericite possessed a significantly higher removal capacity compared to its virgin sericite. Between these two organo-modified sericite, the HDTMA-modified sericite possessed a higher removal capacity compared to the AMBA-modified sericite.     

A simple chemical free arsenic removal method for community water supply - A case study from West Bengal, India

This report describes a simple chemical free method that was successfully used by a team of European and Indian scientists (www.qub.ac.uk/tipot) to remove arsenic (As) from groundwater in a village in West Bengal, India. Six such plants are now in operation and are being used to supply water to the local population (www.insituarsenic.org). The study was conducted in Kasimpore, a village in North 24 Parganas District, approximately 25 km from Kolkata. In all cases, total As in treated water was less than the WHO guideline value of 10 μg L⁻¹. The plant produces no sludge and the operation cost is 1.0 US$ per day for producing 2000 L of potable water.     

Removal of As(III) and As(V) from water by chitosan and chitosan derivatives: a review

As arsenic removal becomes a global concern, the development of removal processes for arsenic treatment is still a major challenge. With regard to environmental compatibility and cheapness, chitosan and chitosan derivatives are considered as a promising removal technology for arsenic. Chitosan and chitosan derivatives possess the properties of low cost and good sorption on the arsenic removal. The present review is concerned about the present understanding of the mechanisms involved in sorption processes. Further on, detailed discussions are given of the effects of various factors on the performance of chitosan and chitosan derivatives in arsenic treatment processes. Finally, special attention is paid to the future challenges of chitosan and chitosan derivatives utilized for industrial arsenic treatment.     

Hydrogeochemical behavior of arsenic-enriched groundwater in the deltaic environment: comparison between two study sites in West Bengal, India

Groundwaters have been collected from deltaic areas of West Bengal (Chakdaha and Baruipur blocks) to record their hydrogeochemical characteristics, and to verify the mechanism of arsenic (As) release. The data reveals that shallow (<70 m) groundwaters in both areas are of Ca-Mg-HCO(3) type; however deeper (>70 m) groundwaters in Baruipur areas are slightly enriched with Na, Cl and SO(4), indicating possible saline water intrusion. The groundwater is anoxic (mean Eh: -124 and -131 mV) with high levels of As (mean: 116 and 293 mug/L), Fe (mean: 4.74 and 3.83 mg/L), PO(4) (mean: 3.73 and 3.21 mg/L) and Mn (mean: 0.37 and 0.49 mg/L), respectively for Chakdaha and Baruipur areas. The observed values of As and bicarbonate (mean: 409 and 499 mg/L) in the shallow aquifer are indicative of redox processes (e.g., oxidation of organic matter) favouring the release of As. Moreover, the presence of DOC in the shallow aquifer suggests that organic matter is young and reactive, and may actively engage in redox driven processes. Our study further confirms that both Fe- and Mn-reduction processes are the dominant mechanisms for As release in these groundwaters.     

Adsorption and removal of As(V) and As(III) using Zr-loaded lysine diacetic acid chelating resin

An adsorption process for the removal of As(V) and As(III) was evaluated under various conditions using zirconium(IV) loaded chelating resin (Zr-LDA) with lysine-Nalpha,Nalpha diacetic acid functional groups. Arsenate ions strongly adsorbed in the pH range from 2 to 5, while arsenite was adsorbed between pH 7 and 10.5. The sorption mechanism is an additional complexation between arsenate or arsenite and Zr complex of LDA. Adsorption isotherm data could be well interpreted by Langmuir equation for As(V) at pH 4 and As(III) at pH 9 with a binding constant 227.93 and 270.47 dm3 mol(-1) and capacity constant 0.656 and 1.1843 mmol g(-1), respectively. Regeneration of the resin was carried out for As(V) using 1 M NaOH. Six adsorption/desorption cycles were performed without significant decrease in the uptake performance. Column adsorption studies showed that the adsorption of As(V) is more favorable compared to As(III), due to the faster kinetics of As(V) compared to As(III). Influence of the coexisting ions on the adsorption of As(V) and As(III) was studied. The applicability of the method for practical water samples was studied.     

Spatial distribution of trace elements in surface sediments of Hooghly (Ganges) river estuary in West Bengal,India

The spatial distribution of trace elements in surface sediments of the Hooghly estuary was studied over the monsoons in 2014–2017. As, Cd, Ni, Pb and U were two- to sixteen-fold the crust means with increasing levels toward the estuary, with Ni peak during the post-monsoon. Pearson’s correlation matrix, cluster analysis, enrichment factors and pollution index revealed the anthropic source and association of trace elements with Fe, Mn and Al and of Pb with U. Geoaccumulation index revealed for Ni an extremely contaminated situation at the estuary water during monsoon and for Cd a heavily contaminated situation at freshwater location. The potential contamination index was >6; thus, sediments were very severely contaminated by As, Cd and Ni with worst situation for As and Cd at fresh and brackish water and during post-monsoon. The overall ecological risk was severe, 300≤RI<600 at all sites and seasons, especially after the monsoon, at fluvial and brackish locations.

     

Removal of As(III) and As(V) using iron-rich sludge produced from coal mine drainage treatment plant

To test the feasibility of the reuse of iron-rich sludge (IRS) produced from a coal mine drainage treatment plant for removing As(III) and As(V) from aqueous solutions, we investigated various parameters, such as contact time, pH, initial As concentration, and competing ions, based on the IRS characterization. The IRS consisted of goethite and calcite, and had large surface area and small particles. According to energy dispersive X-ray spectroscopy mapping results, As was mainly removed by adsorption onto iron oxides. The adsorption kinetic studies showed that nearly 70 % adsorption of As was achieved within 1 h, and the pseudo-second-order model well explained As sorption on the IRS. The adsorption isotherm results agreed with the Freundlich isotherm model, and the maximum adsorption capacities for As(III) and As(V) were 66.9 and 21.5 mg/g, respectively, at 293 K. In addition, the adsorption showed the endothermic character. At high pH or in the presence of phosphate, the adsorption of As was decreased. When the desorption experiment was conducted to reuse the IRS, 85 % As was desorbed with 1.0 N NaOH. In the column experiment, adsorbed As in real acid mine drainage was 43 % of the maximum adsorbed amount of As in the batch test. These results suggested that the IRS is an effective adsorbent for As and can be effectively applied for the removal of As in water and wastewater.     

Soil attenuation of As(III,V) and Se(IV,VI) seepage potential at ash disposal facilities

Leachate from ash landfills is frequently enriched with As and Se but their off-site movement is not well understood. The attenuation potential of As and Se by soils surrounding selected landfills during leachate seepage was investigated in laboratory column studies using simulated ash leachate. As(III, V) and Se(IV, VI) concentrations as well as pH, flow rate, and a tracer were monitored in influent and effluent for up to 800 pore volumes followed by sequential desorption, extraction, and digestion of column segments. Column breakthrough curves (BTCs) were compared to predictions based on previously measured sorption isotherms. Early As(V) breakthrough and retarded As(III) breakthrough relative to predicted BTCs are indicative of oxidative transformation during seepage. For Se(VI), which exhibits linear sorption and the lowest sorption propensity, measured BTCs were predicted fairly well by equilibrium sorption isotherms, except for the early arrival of Se(IV) in one site soil, which in part, may be due to higher column pH values compared to batch isotherms. Most of the As and Se retained by soils during leaching was found to be strongly sorbed (60–90%) or irreversibly bound (10–40%) with <5% readily desorbable. Redox potential favoring transformation to the more sorptive valence states of As(V) and Se(IV) will invoke additional attenuation beyond equilibrium sorption-based predictions. With the exception of Se(IV) on one site soil, results indicate that attenuation by down-gradient soils of As and Se in ash landfill seepage will often be no less than what is predicted by equilibrium sorption capacity with further attenuation expected due to favorable redox transformation processes, thus mitigating contaminant plumes and associated risks.     

The lanthanum precipitation method. Part 1: a new method for technetium(IV) speciation in humic rich natural groundwater

A new and quick method for direct speciation of Tc(IV) in humic rich solutions, based on the induced aggregation of humic substances in the presence of the trivalent cation La(3+), is presented. This method (the "La-precipitation method") allows flocculating all the humic substances and also the Tc(IV) associated with humic substances. The method is tested on solutions containing Tc(IV) and Gorleben humic substances. The influence of different parameters (humic substance concentration, Tc concentration, reaction time and pH) is investigated on the observed free Tc(IV) concentration after precipitation of all humic substances. None of these parameters had a (significant) influence on the observed Tc(IV) concentration in solution after addition of La(3+) to Tc(IV)-HS containing solutions. It is therefore proposed that the method can be used to separate the Tc(IV) bound to humic substances from the free inorganic Tc species in solution.     

Appraisal of groundwater arsenic on opposite banks of River Ganges,West Bengal,India, and quantification of cancer risk using Monte Carlo simulations

Environmental Science and Pollution Research - This study was conducted to inspect the spatial distribution, source identification, and risk assessment of groundwater arsenic (As) in different...     

Impact of the earthworm Lumbricus terrestris (L.) on As, Cu, Pb and Zn mobility and speciation in contaminated soils

To assess the risks that contaminated soils pose to the environment properly a greater understanding of how soil biota influence the mobility of metal(loid)s in soils is required. Lumbricus terrestris L. were incubated in three soils contaminated with As, Cu, Pb and Zn. The concentration and speciation of metal(loid)s in pore waters and the mobility and partitioning in casts were compared with earthworm-free soil. Generally the concentrations of water extractable metal(loid)s in earthworm casts were greater than in earthworm-free soil. The impact of the earthworms on concentration and speciation in pore waters was soil and metal specific and could be explained either by earthworm induced changes in soil pH or soluble organic carbon. The mobilisation of metal(loid)s in the environment by earthworm activity may allow for leaching or uptake into biota.     

Arsenic and other heavy metals in soils from an arsenic-affected area of West Bengal,India

Domkal is one of the 19, out of 26 blocks in Murshidabad district where groundwater contains arsenic above 0.05 mg/l. Many millions of cubic meters of groundwater along with arsenic and other heavy metals are coming out from both the hand tubewells, used by the villagers for their daily needs and shallow big diameter tubewells, installed for agricultural irrigation and depositing on soil throughout the year. So there is a possibility of soil contamination which can moreover affect the food chain, cultivated in this area. A somewhat detailed study was carried out, in both micro- and macrolevel, to get an idea about the magnitude of soil contamination in this area. The mean concentrations (mg/kg) of As (5.31), Fe (6740), Cu (18.3), Pb (10.4), Ni (18.8), Mn (342), Zn (44.3), Se (0.53), Mg (534), V (44.6), Cr (33.1), Cd (0.37), Sb (0.29) and Hg (0.54) in fallow land soils are within the normal range. The mean As (10.7), Fe (7860) and Mg (733) concentrations (mg/kg) are only in higher side whereas Hg (0.17 mg/kg) is in lower side in agricultural land soils, compared to the fallow land soils. Arsenic concentrations (11.5 and 28.0 mg/kg respectively) are high in those agricultural land soils where irrigated groundwater contains high arsenic (0.082 and 0.17 mg/l respectively). The total arsenic withdrawn and mean arsenic deposition per land by the 19 shallow tubewells per year are 43.9 kg (mean: 2.31 kg, range: 0.53-5.88 kg) and 8.04 kg ha(-1) (range: 1.66-16.8 kg ha(-1)) respectively. For the macrolevel study, soil arsenic concentration decreases with increase of distance from the source and higher the water arsenic concentration, higher the soil arsenic at any distance. A proper watershed management is urgently required to save the contamination.     

Effect of arsenic-contaminated irrigation water on agricultural land soil and plants in West Bengal, India

Total arsenic withdrawn by the four shallow tubewells, used for agricultural irrigation in the arsenic-affected areas of Murshidabad district per year is 6.79 kg (mean: 1.79 kg, range: 0.56-3.53 kg) and the mean arsenic deposition on land per year is 5.02 kg ha(-1) (range: 2-9.81 kg ha(-1)). Mean soil arsenic concentrations in surface, root of plants, below ground level (0-30 cm) and all the soils, collected from four agricultural lands are 14.2 mg/kg (range: 9.5-19.4 mg/kg, n = 99), 13.7 mg/kg (range: 7.56-20.7 mg/kg, n = 99), 14.8 mg/kg (range: 8.69-21 mg/kg, n = 102) and 14.2 mg/kg (range: 7.56-21 mg/kg, n = 300) respectively. Higher the arsenic in groundwater, higher the arsenic in agricultural land soil and plants has been observed. Mean arsenic concentrations in root, stem, leaf and all parts of plants are 996 ng/g (range: <0.04-4850 ng/g, n = 99), 297 ng/g (range: <0.04-2900 ng/g, n = 99), 246 ng/g (range: <0.04-1600 ng/g, n = 99) and 513 ng/g (range: <0.04-4850 ng/g, n = 297) respectively. Approximately 3.1-13.1, 0.54-4.08 and 0.36-3.45% of arsenic is taken up by the root, stem and leaf respectively, from the soil.     

Proteomic analysis in Daphnia magna exposed to As(III), As(V) and Cd heavy metals and their binary mixtures for screening potential biomarkers

In this study, the effects of three widespread heavy metals, As(III), As(V) and Cd, and their binary mixtures on the proteomic profile in D. magna were examined to screen novel protein biomarkers using the two-dimensional gel electrophoresis method (2DE). Ten 20d daphnia were exposed to the LC20 concentrations for each of a total of 8 treatments, including the control, As(III), As(V), Cd, [As(III)+As(V)], [As(III)+Cd], [As(V)+Cd], and [As(III), As(V), Cd], for 24 h before protein isolation. Three replicates were performed for each treatment. These protein samples were employed for 2DE experiments with a pH gradient gel strip from pH 3 to pH 10. The protein spots were detected by a silver staining process and their intensities were analyzed by Progenesis software to discover the differentially expressed proteins (DEPs) in response to each heavy metal. A total of 117 differentially expressed proteins (DEPs) were found in daphnia responding to the 8 treatments and mapped onto a 2D proteome map, which provides some information of the molecular weight (MW) and pI value for each protein. All of these DEPs are considered as potential candidates for protein biomarkers in D. magna for detecting heavy metals in the aquatic ecosystem. Comparing the proteomic results among these treatments suggested that exposing D. magna to binary mixtures of heavy metals may result in some complex interactive molecular responses within them, rather than just the simple sum of the proteomic profiles of the individual chemicals, (As(III), As(V), and Cd).     

Hydrogeochemical comparison and effects of overlapping redox zones on groundwater arsenic near the Western (Bhagirathi sub-basin, India) and Eastern (Meghna sub-basin, Bangladesh) margins of the Bengal Basin

Although arsenic (As) contamination of groundwater in the Bengal Basin has received wide attention over the past decade, comparative studies of hydrogeochemistry in geologically different sub-basins within the basin have been lacking. Groundwater samples were collected from sub-basins in the western margin (River Bhagirathi sub-basin, Nadia, India; 90 samples) and eastern margin (River Meghna sub-basin; Brahmanbaria, Bangladesh; 35 samples) of the Bengal Basin. Groundwater in the western site (Nadia) has mostly Ca-HCO(3) water while that in the eastern site (Brahmanbaria) is much more variable consisting of at least six different facies. The two sites show differences in major and minor solute trends indicating varying pathways of hydrogeochemical evolution However, both sites have similar reducing, postoxic environments (p(e): +5 to -2) with high concentrations of dissolved organic carbon, indicating dominantly metal-reducing processes and similarity in As mobilization mechanism. The trends of various redox-sensitive solutes (e.g. As, CH(4), Fe, Mn, NO(3)(-), NH(4)(+), SO(4)(2-)) indicate overlapping redox zones, leading to partial redox equilibrium conditions where As, once liberated from source minerals, would tend to remain in solution because of the complex interplay among the electron acceptors.     

A simple spectrophotometric method for the determination of cobalt in industrial, environmental, biological and soil samples using bis(salicylaldehyde)orthophenylenediamine

Bis(salicylaldehyde)orthophenylenediamine (BSOPD) has been proposed as new analytical reagent for the direct non-extractive spectrophotometric determination of cobalt. It reacts with cobalt in slightly acidic (0.0002-0.001 M H(2)SO(4)) 50% 1,4-dioxanic medium to form a red-orange chelate with a molar ratio 1:1. The reaction is instantaneous and the maximum absorbance was obtained at 458 nm and remains constant for over 24h. The average molar absorption coefficient and Sandell's sensitivity were found to be 1.109 x 10(4)l mol(-1)cm(-1) and 20 ng cm(-2) of Co(II), respectively. Linear calibration graph was obtained for 0.1-15 mg l(-1) of Co(II) with a correlation coefficient value of 0.995 for Co-BSOPD complex. Large excess of 44 cations, anions and complexing agents do not interfere in the determination. The method was successfully used in the determination of cobalt(II) from synthetic mixture and certified reference materials for the purpose of validating the method and the results of analyses were found to be excellent agreement with those of actual values. This developed method was also used for determination of cobalt in some environmental waters (potable and polluted), biological (blood and urine) and soil samples and solution containing both cobalt(II) and cobalt(III). The results of the proposed method for biological samples were comparable with AAS and were found to be in good agreement. The method has high precision and accuracy (s=+/-0.01 for 0.5 mg l(-1)).     

Food crop accumulation and bioavailability assessment for antimony (Sb) compared with arsenic (As) in contaminated soils

Field samples and a 9-week glasshouse growth trial were used to investigate the accumulation of mining derived arsenic (As) and antimony (Sb) in vegetable crops growing on the Macleay River Floodplain in Northern New South Wales, Australia. The soils were also extracted using EDTA to assess the potential for this extractant to be used as a predictor of As and Sb uptake in vegetables, and a simplified bioaccessibility extraction test (SBET) to understand potential for uptake in the human gut with soil ingestion. Metalloids were not detected in any field vegetables sampled. Antimony was not detected in the growth trial vegetable crops over the 9-week greenhouse trial. Arsenic accumulation in edible vegetable parts was <10 % total soil-borne As with concentrations less than the current Australian maximum residue concentration for cereals. The results indicate that risk of exposure through short-term vegetable crops is low. The data also demonstrate that uptake pathways for Sb and As in the vegetables were different with uptake strongly impacted by soil properties. A fraction of soil-borne metalloid was soluble in the different soils resulting in Sb soil solution concentration (10.75?±?0.52 μg L^–1) that could present concern for contamination of water resources. EDTA proved a poor predictor of As and Sb phytoavailability. Oral bioaccessibility, as measured by SBET, was <7 % for total As and <3 % total Sb which is important to consider when estimating the real risk from soil borne As and Sb in the floodplain environment.     

A comparison of sediment quality guidelines for toxicity assessment in the Sunderban wetlands (Bay of Bengal, India)

The aim of this paper was to obtain the first screening ecotoxicological risk evaluation in the Sunderban wetlands, the largest prograding delta in the estuarine phase of the River Ganges. The characterization of exposure was conducted by means of an extensive survey of several persistent organic pollutants (PAHs, PCBs, DDTs, PBDEs, HCHs, HCB) measured in seven core sediments from the Sunderban wetlands, obtaining a dataset with more than 2200 analyses. The pollutant effects were assessed by the use of three different sediment quality guidelines (SQGs) previously developed in the literature to evaluate toxicity induced in sediment-dwelling organisms. The three different approaches chosen for risk assessment of the Sunderban were the consensus SQGs obtained by TEC (threshold effect concentration), PEC (probable effect concentration) and EEC (extreme effect concentration), the threshold/probable effect level (TEL/PEL) approach and, finally, the ERL-ERM guidelines, including the m-ERM-Q (mean ERM quotient). The evaluation of the toxicity induced by a mixture of the target pollutants indicated the importance of gamma-HCH contamination in the Sunderban sediments despite the very low concentrations measured in core sediments. A different sensitivity for toxicity assessment due to quality guidelines was obtained, as the consensus SQGs based on TEC were less conservative and protective than the TEL and ERL approaches, while the use of m-ERM-Q seems to be the most powerful tool to predict the toxicity related to a contaminant mixture.     

Evaluation of modifications of the simple spectrofluorometry method for estimating petroleum hydrocarbon levels in fresh and waste water samples

The monitoring of petroleum hydrocarbons in the water environment is very often performed using complicated methods. There are many difficulties encountered in analyzing a long number of samples in the monitoring programme. In such cases, a simpler though less precise and specific technique using inexpensive equipment to monitor a large number of water samples, might be more desirable.

This idea was realized in the assessment of the state of pollution of the Mediterranean Sea by petroleum hydrocarbons where the pollution of sea water with oil (dissolved and/or dispersed in sea water) was measured by spectrofluorometry. The paper describes an analytical evaluation of three modifications of simple the spectrofluorometry method, applied on numerous river and waste water samples collected from various areas of Croatia.     

Organochlorine pesticides accumulation and degradation products in vegetation samples of a contaminated area in Galicia (NW Spain)

The content of 21 organochlorine pesticides were studied in vegetation samples of a highly contaminated area by isomers of hexachlorocyclohexane (HCH) located close to a former industrial area in Galicia (NW Spain). Five species of plants were collected at different points of the contaminated area and the different parts of the plants were separated in order to study differences in accumulation capabilities. Samples were extracted employing microwave energy followed by a clean-up step using solid phase extraction and finally determined by GC–ECD. The results obtained show that the most abundant pesticides are HCHs isomers, being the main isomers β-HCH and -HCH in all samples whereas δ-HCH and γ-HCH were at lower levels. Some other pesticides such as p,p′-DDT, p,p′-DDD and p,p′-DDE were also present in much lower amount in some of the samples. Several degradation products of HCH were also identified in some samples by GC–MS.