声波清灰技术的原理及其应用

声波清灰是一种利用声场能量的作用,清除物料表面积灰的方法.主要介绍了声波清灰技术在静电除尘器和布袋除尘器中的工作原理及其应用现状.     

Acoustic detection technology for gas pipeline leakage

Gas leakage from pipeline leads to significant environmental damages and industrial hazards, so small leakage detection for gas pipeline is essential to avoid these serious leakages. However, because of the high frequency component of leakage signal attenuates quickly, traditional detection method which inspects pressure or vibration signal has problem to get effective information from leakage signal. So, a novel detection method based on acoustic wave is proposed. This paper, firstly, researches on the phonation principle of pipeline leakage and the characteristic of sound source, and simulates the leakage acoustic field on the basis of aero acoustics. Secondly, using Wavelet Packet Transform method and Fuzzy Support Vector Machine pattern classification, the laboratory testing for identifying acoustic signal of gas pipeline leakage is presented. Finally, the field application demonstrates that the detection system could identify small gas leakage effectively and avoids false-alarms which caused by running conditions with a good prospect.     

Location of noise sources in fluid power machines.

This paper discusses noise generation mechanisms and techniques for noise reduction in fluid power units. Major noise sources in fluid power units can be identified with a sound intensity method. It has been proved that components of power units with larger sound radiating surfaces such as an electric motor and an oil reservoir produce a major part of global noise radiation.     

Subjective Annoyance Response to Diesel Engine Sound During Idling Conditions

Subjective annoyance response to diesel engine sound during idling conditions was evaluated by 80 participants. Eight different sound spectra were presented to the participants at a constant level of 80 dB(A) in a paired comparison procedure. Stereo-recorded sound stimuli were played back through a pair of loudspeakers in an anechoic room. Four objective parameters of loudness, sharpness, impulsiveness, and roughness were found to be the determining factors that cause subjective annoyance. An annoyance prediction model for the test stimuli of an idling diesel engine was developed on the basis of these factors. The objective parameters and their interactions have a significant effect on the annoyance prediction model. The spectral distribution indicated by test participants to be pleasant can be used as a basis for appropriate modification of engine sound. A single microphone measurement in free field conditions can be used to estimate objective parameters for defining the cause of annoyance.     

废硅橡胶二次裂解渣制多孔吸声材料的研究

采用吸声材料是吸声、降噪、改善声环境的有效手段。本文研究用废旧硅橡胶二次裂解渣和粘结剂为主要原料,采用压制成型的工艺,在常温下制成一种多孔吸声材料。主要考虑残渣里的硅烷类油份和所用发泡剂对试件吸声性能的影响。试验结果表明：所制吸声材料能达到一定的吸声性能,具有对环境无污染,施工方便等优点;且分离出硅烷类油份的灰渣所制试件比原废旧硅橡胶裂解残渣的吸声效果好很多,尤其在共振频率1250Hz下达到吸声峰值0.87。FP-186植物性水泥发泡剂相比FP-180动物性水泥发泡剂对试件吸声性能有所改善,使吸声特性曲线向低频方向移动。     

露采高边坡模型初始地应力场快速生成方法研究*

为防止露釆高边坡建模中初始地应力场畸变,采用子模型法和等效应力梯度边界面力法,用等效应力梯度边界面力替代简化部分水平构造应力,施加侧边界条件。以黄山石灰石矿山高边坡为工程实例,建立取至负地形的高边坡整体计算模型和简化子模型,计算对比整体大模型与简化子模型初始地应力场模拟结果。结果表明:整体大模型与简化子模型水平方向和竖直方向应力误差较小,证明此数值模型简化法可行;以工程边界作为简化子模型侧边界,节点和单元简化率约52%,可快速模拟初始地应力场,提高计算效率。研究结果为高边坡整体大模型初始地应力快速生成提供新思路。     

利用声凝聚机理提高喷雾降尘效果的研究

本文论述了利用声凝聚机理提高喷雾降尘效果,特别是对呼吸尘的降尘效果的研究过程。由该机理建立了声波频率和声强与降尘效果之间的数学模型。在此数学模型的基础上,开展了对声波发生器和声学喷嘴的研究。实验及使用结果表明,声学喷嘴可以显著提高对呼吸尘的降尘效果。     

微穿孔板吸声结构设计参数研究进展

为推进健康城市防噪降噪工作,预防和减少噪声污染对人们健康产生的危害和不良影响,研究声学材料-微穿孔板吸声结构设计参数对降噪防噪的促进作用。首先,采用文献综述方法,以传统微穿孔板基本理论和基本特性为基础,根据国内外研究现状,按照改变板结构、微孔结构和空腔结构等设计参数进行分类;其次,分析不同改变方式对微穿孔板吸声性能的影响;最后,归纳总结可提升微穿孔板降噪功效的不同方法。研究结果表明:合理改变微穿孔板吸声结构设计参数是预防和改善噪声污染的有效方法,研究结果可为健康城市防噪降噪工作提供参考依据及理论支撑。     

The Inversion Method in Measuring Noise Emitted by Machines in Opencast Mines of Rock Material

The inversion method was used to test vibroacoustic processes in large-size machines used in opencast mines of rock material. When this method is used, the tested machine is replaced with a set of substitute sources, whose acoustic parameters are determined on the basis of sound pressure levels and phase shift angles of acoustic signals, measured with an array of 24 microphones. This article presents test results of a combine unit comprising a crusher and a vibrating sieve, for which an acoustic model of 7 substitute sources was developed with the inversion method.     

Experimental study on leak detection and location for gas pipeline based on acoustic method

The leak of gas pipelines can be detected and located by the acoustic method. The technologies of recognizing and extracting wave characteristics are summarized in details in this paper, which is to distinguish leaking and disturbing signals from time and frequency domain. A high-pressure and long distance leak test loop is designed and established by similarity analysis with field transmission pipelines. The acoustic signals collected by sensors are de-noised by wavelet transform to eliminate the background noises, and time-frequency analysis is used to analyze the characteristics of frequency domain. The conclusion can be drawn that most acoustic signals are concentrated on the ranges of 0-100 Hz. The acoustic signal recognition and extraction methods are verified and compared with others and it proves that the disturbing signals can be efficiently removed by the analysis of time and frequency domain, while the new characteristics of the accumulative value difference, mean value difference and peak value difference of signals in adjacent intervals can detect the leak effectively and decrease the false alarm rate significantly. The formula for leak location is modified with consideration of the influences of temperature and pressure. The positioning accuracy can be significantly improved with relative error between 0.01% and 1.37%.     

声发射检测灵敏度校准声源实验分析

在声发射技术的应用中,传感器的工作频率和灵敏度对AE检测的结果具有决定性的作用,传感器的校准是AE定量研究的基础,也是声发射检测技术研究中的重要课题。根据二级校准的相关要求设计了三个不同声源的实验:落球、断铅和压断毛细玻璃管法。通过重复性实验,测量了不同大小的钢球从不同高度下落;不同粗细、硬度以及不同长度的铅芯的断裂;不同粗细的毛细玻璃管被压断产生的脉冲声源,分别比较以上三个实验在不同状态条件下产生的脉冲声源信号,分析其实时特征和频谱特征(峰值,上升时间),通过计算确定其不确定度和稳定度,总结优化操作方法,同时分析了实验误差。在此基础上得出最适合做声发射传感器灵敏度校准的脉冲声源,为声发射传感器校准中的参考声源提供性能评判的依据。     

采空区隐蔽火源探测及声学法煤温感知新技术探讨*

为精准判定采空区等地下隐蔽火区高温点的位置和范围,综述现有采空区煤自燃温度探测技术,重点总结和分析红外探测法、分布式光纤测温法、指标气体探测法、热电偶测温技术以及同位素测氡法等煤层测温手段的研究进展与技术瓶颈,着重研究声学法测温的技术原理及实现方式;结合分层建模和插值建模的优点,探讨声学测温技术在采空区松散煤体煤温反演探测应用中的可行性。结果表明:受限于煤层赋存及开采方式等煤矿现场的实际情况,准确反演和精确定位采空区等隐蔽火源高温点和位置的探测方法和装备技术有待进一步发展;声学法探测松散煤体自燃温度的基本原理、传播衰减规律、温度场重构模型及其关键特征参量需进一步准确获取;综合考量声学测温技术原理和实现过程,该技术适用于采空区松散煤体自燃火区的环境特征,有望成为采空区隐蔽火源位置精准探测发展前景良好的探测方法。     

环空带压气井保护液液位测试方法研究

为了有效检测环空保护液位,评估气井环空带压情况,在传统回声法检测的基础上,提出了基于频谱分析及自相关分析的2种液位检测方法;搭建了液位检测试验系统,开展了不同环空压力下的液位检测试验,计算了不同压力下的环空声速;设计了FIR低通滤波器对液面回波信号进行滤波处理,同时利用了上述2种方法计算液位值并与实际值及传统液位计算方法对比,得出了声衰减系数并评判了衰减过程对液面回波信号频谱分析的影响程度。研究结果表明:设计的FIR低通滤波器适用于所建液位检测试验的滤波处理过程;频谱分析及自相关分析都能够有效检测液位高度,最大误差分别为1.65%和0.61%,自相关分析方法具有更高的精确度;声衰减系数整体较小,对液面回波信号频谱分析结果影响较小。     

Q345R在微量小分子有机酸中的腐蚀行为研究

本文通过腐蚀失重试验、腐蚀产物分析和交流阻抗谱研究了Q345R在不用的微量的两种小分子有机酸(甲酸和乙酸)中的常温25℃和液相高温85℃中腐蚀行为.根据试验结果可知,随着浓度的逐渐升高,Q345R在两种小分子有机酸腐蚀速率均有所升高,腐蚀产物逐渐增厚,腐蚀形貌未发生明显变化.根据电化学试验结果,在25℃环境温度下,小分子有机酸对Q345R的腐蚀剧烈程度随时间明显降低,并且表面吸附作用明显减弱.在85℃环境温度下,小分子有机酸对Q345R的腐蚀剧烈程度随时间变化不大,反应行为也未发生明显的变化.这说明在较高的温度下,随着反应激活能提高,扩散条件并非控制腐蚀反应的最主要因素,腐蚀行为也与较低环境温度下产生显著的区别.     

个人保护头盔的回声与隔声性能

设计中使用了自相关函数测试混响声衰变速度、自功率谱（参考传递函数与冲击响应）测试插入损失的方法，对头盔的回声与隔声效果进行客观分析。其结果表明，不同设计的头盔的回声与隔声性能，确实有很大差别。     

矿井下着火点位置数值模拟研究

矿井煤炭自燃是煤矿五大自然灾害之一,而煤炭自燃隐蔽着火点位置的确定是解决煤炭自燃问题的关键。本文结合实际情况将火源位置的确定问题归结为热传导方程的寻源反问题。在理想状态下,把煤矿井下热传导的三维模型简化为二维模型,建立热传导方程及初始条件和边界条件,在matlab中编制了有限差分程序对井下着火点的温度场进行了正反演模拟。数值模拟结果表明:该方法能够较准确地反演出火源的特性,并随着离散化程度的提高,离散解逐渐逼近真实解。通过本文的数值模拟我们得知有限差分法求解热传导寻源反演的方法是解决矿井隐蔽火源发火点位置的有效途径之一,对矿井防、灭火研究具有较高的理论和实际应用价值。     

Preferred surface microscopic geometric features on floors as potential interventions for slip and fall accidents on liquid contaminated surfaces

PROBLEM: Surface roughness affects friction, so selection of floor surfaces with certain roughness characteristics could potentially reduce slip and fall accidents. This article summarizes the preferred surface microscopic geometric features that could increase friction on surfaces covered with liquid contaminants. METHOD: Three types of surface features, represented by the average of the maximum height above the mean line in each cut-off length (R(pm)), the arithmetical average of surface slope (Delta(a)), and the kernel roughness depth (R(k)), are identified as preferred surface microscopic geometric features for a higher friction. The proper settings on the profilometers (instruments used to measure surface roughness) for optimizing these surface parameters are specified. The friction mechanisms involved reveal why these features are more desirable. RESULTS: Although surface roughness is important in determining slipperiness, there is still insufficient information to establish a safety criterion based on roughness; however, the method presented in this paper can readily provide a relative comparison. IMPACT ON INDUSTRY: The summary presented will help safety professionals properly select new floor surfaces or assess existing floors to reduce slip and fall accidents.     

风机横向布置间距对公路隧道污染物分布的影响研究

隧道内风机布置方式对通风效率和汽车尾气净化有显著影响,为了优化隧道顶部风机横向布置,提高隧道通风效率,改善隧道内的环境质量,有效节约隧道运营通风能耗,利用计算流体软件Fluent,建立公路隧道射流通风模型,开展不同风机横向布置间距隧道内流场和污染物分布的三维数值模拟,分析隧道内流场分布、纵向CO质量分数分布和不同截面CO质量分数分布特征及规律。结果表明:风机横向布置间距对隧道内的通风和净化除尘效果都有一定的影响,流场分布与污染物分布规律相似;在风机横向布置间距为3倍风机直径时,升压折减系数为0.6154,达到最大值,此时隧道内的流场分布和污染物控制效果较好;因此,在进行风机布置时,建议将风机横向布置间距确定为3倍风机直径。     

环空带压气井液位测试方法改进研究及应用

为了实时有效监测环空带压气井的液面位置,评价环空带压气井的风险,在传统回波定位技术基础上,提出了1种基于自相关分析的气井液位声波测试方法;建立了环空液位声波测试实验系统,开展了不同起爆压力下环空液位测试实验;对检测到声波信号进行平滑降噪和自相关分析,计算液面位置,并与真实液位进行对比分析;将该方法在现场含噪声的环空带压气井液位测试中进行了应用。结果表明:该方法能够对环空液位声波测试信号中的液面反射波进行有效提取;相比较现有在测试信号平滑降噪基础上提取的液面位置,降低了计算误差;同时,该方法能够在井下噪声环境中实现微弱液面反射声波的有效提取,其处理后的信号峰值指标更为突出,提高了测试系统对液位的识别能力,便于自动识别。     

Analysis of noise pollution in an andesite quarry with the use of simulation studies and evaluation indices

This paper presents the verification of two partial indices proposed for the evaluation of continuous and impulse noise pollution in quarries. These indices, together with the sound power of machines index and the noise hazard index at the workstation, are components of the global index of assessment of noise hazard in the working environment of a quarry. This paper shows the results of acoustic tests carried out in an andesite quarry. Noise generated by machines and from performed blasting works was investigated. On the basis of acoustic measurements carried out in real conditions, the sound power levels of machines and the phenomenon of explosion were determined and, based on the results, three-dimensional models of acoustic noise propagation in the quarry were developed. To assess the degree of noise pollution in the area of the quarry, the continuous and impulse noise indices were used.