TIDAL POWER GENERATION UTILIZING ATMOSPHERIC PRESSURE OR AIR RECIRCULATION1

ABSTRACT: This paper presents research conducted on tidal power generation utilizig atmospheric pressure or air recirculation. The proposed methods in this paper differ from conventional methods. That is, they require simple and relatively inexpensive power generating facilities that would convert the potential energy of the tides into kine tic energy of air for driving the air turbines in a power plant. The characteristics of the new methods are as follows: (1) in tidal power generation utilizing the atmospheric pressure, the air pressure exerted on an air turbine can be maintained at 1 atm regardless of the water head; (2) in tidal power generation utilizing the air recirculation, the air pressure exerted on an air turbine can be made twice as high as the available water head; (3) higher tidal energy conversion efficiency can be obtained by flowing larger quantities of water in a shorter time period; (4) the generating turbines can be located at a convenient place remote from the reservoir; and (5) equipment corrosion due to salt is minimized.     

SIMULATION OF RUNOFF FROM URBAN WATERSHEDS1

ABSTRACT. .A mathematical model for urban watersheds is being developed in stages at the Utah Water Research Laboratory, Utah State University at Logan. In verifying the watershed as a unit, watershed coefficients are determined on the computer, and related to the urbanization characteristics. The second stage of verification consists of dividing the watershed into subzones, and determining the urban parameters within each subzone. Each subzone is then individually modeled, and outflow hydrographs are routed through succeeding downstream subzones to the gaging point. The model thus makes it possible to: (a) develop runoff models for subzone hydrographs within the urban watershed, and (b) account for spatial variations of storm and watershed characteristics. An attempt was also made to analytically model the outflow hydrograph based on storm and watershed characteristics.     

INDEXED SEQUENTIAL HYDROLOGIC MODELING FOR HYDROPOWER CAPACITY ESTIMATION1

ABSTRACT: The indexed sequential hydrologic modeling (ISM) methodology is utilized by the Western Area Power Administration as the basis for risk-based estimation of project-dependable hydropower capacity for several federally owned/operated projects. ISM is a technique based on synthetic generation of a series of overlapping short-term inflow sequences obtained directly from the historical record. The validity of ISM is assessed through application to the complex multireservoir hydropower system of the Colorado River basin for providing risk estimates associated with determination of reliable hydrogeneration capacity. Performance of ISM is compared with results from stochastically generated streamflow input data to the Colorado River Simulation System (CRSS). Statistical analysis and comparison of results are based on monthly power capacity, energy generation, and downstream water deliveries. Results indicate that outputs generated from ISM synthetically generated sequences display an acceptable correspondence with those obtained from stochastically generated hydrologic data for the Colorado River Basin.     

DETERMINISTIC HYDROLOGIC MODELING OF GRAZING SYSTEM IMPACTS ON INFILTRATION RATES1

ABSTRACT: Techniques for predicting the hydrologic effects of grazing schemes have heretofore been unavailable. The available literature on grazing intensity influences on infiltration rates is used as a basis for a model of infiltration behavior in response to grazing systems. Background, development, cautions, and an example are given.     

ESTIMATING REGIONAL SNOW WATER EQUIVALENT WITH A SIMPLE SIMULATION MODEL1

A simple simulation model designed to monitor snow-packs of the central Sierra Nevada is described. The model estimates average snow water equivalent for rectangular subregions in the area. Static subregion characteristics, daily precipitation and mean and minimum air temperatures measured at three index stations are the only needed input values. A water balance technique simulates daily snowpack changes in each subregion. Reasonable basinwide water equivalent values are produced. The procedure should be useful for estimating snow water distribution in large mountainous watersheds.     

CONTINUOUS SIMULATION OF RECEIVING WATER QUALITY TRANSIENTS1

: This paper presents solutions to the one-dimensional, transient conservation of mass equations for the coupled biochemical oxygen demand-dissolved oxygen (BOD-DO) reactions, based on the principle of superposition, for continuously discharging plane sources. The solutions are applied within the framework of a continuous simulation model to allow the derivation of water quality frequency curves and frequency histograms of consecutive hourly dissolved oxygen violations, for any desired standard. Receiving water response is determined for waste inputs from urban wet weather, dry weather, and upstream sources. An application to Des Moines, Iowa, and Des Moines River indicated that urban storm water impacts on the stream can be masked in the cumulative frequency curve representation, but the benefits of storm water control are clearly shown in frequency histograms of the duration of consecutive stream standard violations.     

DECISION SUPPORT SYSTEM FOR SELECFING INPUTS TO A BASIN SCALE MODEL1

ABSTRACT: Common constraints in using existing mathematical models are the lack of appropriate input data and inadequate time and money to perform the modeling. A decision support system was developed to aid in selecting inputs to a basin scale soil and water resources model. The system prompts users for input values and formats them in the model input file. The system also accesses large data bases, interfaces with expert systems, gives explanations, suggests default values, and provides graphics. Technology transfer will be enhanced by decreasing the time and money spent during model use and increasing user confidence in the model.     

EFFECTS OF STATSGO AND SSURGO AS INPUTS ON SWAT MODEL'S SNOWMELT SIMULATION1

ABSTRACT: Soil data comprise a basic input of SWAT (Soil and Water Assessment Tool) for a watershed application. For watersheds where site specific soil data are unavailable, the two U.S. Department of Agriculture (USDA) soil databases, the State Soil Geographic (STATSGO) and Soil Survey Geographic (SSURGO) databases, may be the best alternatives. Although it has been noted that SWAT models using the STATSGO and SSURGO data may give different simulation results for water, sediment, and agricultural chemical yields, information is scarce on the effects of using these two databases in predicting streamflows that are predominantly generated from melting snow in spring. The objective of this study was to assess the effects of using STATSGO versus SSURGO as an input for the SWAT model's simulation of the streamflows in the upper 45 percent of the Elm River watershed in eastern North Dakota. Designating the model as SWAT‐STATSGO when the STATSGO data were used and SWAT‐SSURGO when the SSURGO data were used, SWAT‐STATSGO and SWAT‐SSURGO were separately calibrated and validated using the observed daily streamflows. The results indicated that SWAT‐SSURGO provided an overall better prediction of the discharges than SWAT‐STATSGO, although both did a good and comparable job of predicting the high streamflows. However, SWAT‐STATSGO predicted the low streamflows more accurately and had a slightly better performance during the validation period. In addition, the discrepancies between the discharges predicted by these two SWAT models tended to be larger at upstream locations than at those farther downstream within the study area.     

HYDROLOGIC IMPACT OF WEATHER MODIFICATION1

ABSTRACT: Weather modification is being proposed as a routine method of augmenting agricultural water supplies in the Southern Great Plains. This paper discusses some of the potential hydrologic impacts of weather modification. Previous work in assessing hydrologic impact is covered; the conclusion is drawn that the work is insufficient. An approach based on hydrologic models is suggested that can consider uncertainties about the effect of weather modification on rainfall and some uncertainties about the effect of model error on impact conclusions.     

WATERSHED CONFIGURATION AND GEOGRAPHIC INFORMATION SYSTEM PARAMETERIZATION FOR SPUR MODEL HYDROLOGIC SIMULATIONS1

ABSTRACT: A grid cell geographic information system (GIS) is used to parameterize SPUR, a quasi-physically based surface runoff model in which a watershed is configured as a set of stream segments and contributing areas. GIS analysis techniques produce various watershed configurations by progressive simplification of a stream network delineated from digital elevation models (DEM). We used three watershed configurations: ≥ 2nd, ≥ 4th, and ≥ 13th Shreve order networks, where the watershed contains 28, 15, and 1 channel segments with 66, 37, and 3 contributing areas, respectively. Watershed configuration controls simulated daily and monthly sums of runoff volumes. For the climatic and topographic setting in southeastern Arizona the ≥ 4th order configuration of the stream network and contributing areas produces results that are typically as good as the ≥ 2nd order network. However both are consistently better than the ≥ 13th order configuration. Due to the degree of parameterization in SPUR, model simulations cannot be significantly improved by increasing watershed configuration beyond the ≥ 4th order network. However, a range of Soil Conservation Service curve numbers derived from rainfall/runoff data can affect model simulations. Higher curve numbers yield better results for the ≥ 2nd order network while lower curve numbers yield better results for the ≥ 4th order network.     

UTILIZATION OF MODELS IN WATER RESOURCES1

ABSTRACT: A 1984 survey of water resources personnel was conducted to determine the current and future uses of mathematical models in planning, design and operations of water resources systems. Eighty-six percent of those responding indicated they have used mathematical models in the last year. Lack of appropriate data, inadequate time and funding to do the modeling and lack of models that represent the “real world” situation were the most frequently mentioned constraints to model use. Microcomputers were seen as having a positive influence on mathematical model use in water resources.     

A METHOD FOR OBTAINING SLOPE INFORMATION FOR HYDROLOGIC MODELS1

: A method is described for obtaining surface slope information for analysis with other land resource and water quality data in hydrologic models of nonpoint sources of water pollution. The method described requires a point sampling scheme, topographic maps, and a coordinate digitizer. Sample point elevation, slope direction, and slope magnitude are calculated from locations of the sample point and the nearest upper and lower contour lines. Details of the data collection methodology and associated problems are discussed.     

MISSISSIPPI EMBAYMENT AQUIFER SYSTEM IN MISSISSIPPI: GEOHYDROLOGIC DATA COMPILATION FOR FLOW MODEL SIMULATION1

ABSTRACT: As part of the Gulf Coast Regional Aquifer System Analysis (GC RASA) study, data from 184 geophysical well logs were used to define the geohydrologic framework of the Mississippi embayment aquifer system in Mississippi for flow model simulation. Five major aquifers of Eocene and Paleocene age were defined within this aquifer system in Mississippi. A computer data storage system was established to assimilate the information obtained from the geophysical logs. Computer programs were developed to manipulate the data to construct geologic sections and structure maps. Data from the storage system will be input to a five-layer, three-dimensional, finite-difference digital computer model that is used to simulate the flow dynamics in the five major aquifers of the Mississippi embayment aquifer system.     

ONE APPROACH TO IRRIGATION MODELING UNDER RISK1

Recent progress in operations research has refined stochastic programming with recourse sufficiently to significantly increase its potential for use in water resource planning. To demonstrate its strengths and weaknesses this paper considers an irrigation planning problem and illustrates how more and more refined variants of this problem are successively cast into stochastic programming with recourse forms. The result is an outline of the state of the art with method limitations and demands on model formulation clearly indicated.     

RESIDUAL POWER AND ECONOMIC FEASIBILITY OF A SOLAR POWERED IRRIGATION SYSTEM1

ABSTRACT: The problem of nonmatching irrigation and solar power production seasons creates the problem of what to do with the surplus power. The economic law of opportunity cost dictates that substitution for currently commercially purchased power is the best use for this power. This law also allows for new power using enterprises that satisfy specific criteria to be used on the farm before sale of the residual to a local public utility can be considered. Economic and Financial Evaluation of the solar powered irrigation system show that the price of commercially purchased power must reach 9.5 cents per Kwh before the system is feasible under the ideal assumption of complete use of the residual power to substitute for commercially purchased power.     

A NONLINEAR PROGRAMMING ALGORITHM FOR REAL-TIME HOURLY RESERVOIR OPERATIONS1

ABSTRACT: The optimization of real-time operations for a single reservoir system is studied. The objective is to maximize the sum of hourly power generation over a period of one day subject to constraints of hourly power schedules, daily flow requirement for water supply and other purposes, and the limitations of the facilities. The problem has a nonlinear concave objective function with nonlinear concave and linear constraints. Nonlinear Duality Theorems and Lagrangian Procedures are applied to solve the problem where the minimization of the Lagrangian is carried out by a modified gradient projection technique along with an optimal stepsize determination routine. The dimension of the problem in terms of the number of variables and constraints is reduced by eliminating the 24 continuity equations with a special implicit routine. A numerical example is presented using data provided by the Bureau of Reclamation, Sacramento, California.     

SIMULATION OF THE EFFECTS OF URBANIZATION ON BASIN STREAMFLOW1

ABSTRACT: The hydrologic modeling of streamflow in the Waterford River Basin has been conducted as part of comprehensive investigations of the effects of urbanization on water resources in the basin. Using a detailed input data base, continuous simulation of streamflow in the study area has been done by means of the HSPF model, which has been calibrated for the existing conditions and then applied to several future land use scenarios. The basin climate and geology contribute to high conversion of precipitation into streamflow under the existing conditions. Consequently, future urban development in the study basin should not increase the annual streamflow, but would contribute to increases in peak flows and the incidence of flooding because of the increased speed of runoff. If the impervious area in the basin is doubled, the peak flows may increase by about 20 percent.     

SWMHMS - SMALL WATERSHED MONTHLY HYDROLOGIC MODELING SYSTEM1

ABSTRACT: SWMHMS is a conceptual computer modeling program developed to simulate monthly runoff from a small nonurban watershed. The input needed to run model simulations include daily precipitation, monthly data for evapotranspiration determination (average temperature, crop consumptive coefficients, and percent daylight hours), and six watershed parameter values. Evapotranspiration was calculated with the Blaney-Criddle equation while surface runoff was determined using the Soil Conservation Service curve number procedure. For watershed parameter evaluation, SWMHMS provides options for both optimization and sensitivity analysis. Observed runoff data are required along with the model input previously mentioned in order to conduct parameter optimization. SWMEIMS was tested with data from six watersheds located in different regions of the United States. Model accuracy was generally found to be very good except on watersheds having substantial snowfall accumulation. In having only six watershed parameters, SWMHMS is less complex to use than many other computer programs that calculate monthly runoff. Consequently, SWMHMS may find its greatest application as an educational tool for students learning principles of hydrologic modeling, such as parameter evaluation procedures and the impacts of input data uncertainty on model results.     

ADEQUACY OF SELECTED EVAPOTRANSPIRATION APPROXIMATIONS FOR HYDROLOGIC SIMULATION1

ABSTRACT: Evapotranspiration (ET) approximations, usually based on computed potential ET (PET) and diverse PET‐to‐ET conceptualizations, are routinely used in hydrologic analyses. This study presents an approach to incorporate measured (actual) ET data, increasingly available using micrometeorological methods, to define the adequacy of ET approximations for hydrologic simulation. The approach is demonstrated at a site where eddy correlation‐measured ET values were available. A baseline hydrologic model incorporating measured ET values was used to evaluate the sensitivity of simulated water levels, subsurface recharge, and surface runoff to error in four ET approximations. An annually invariant pattern of mean monthly vegetation coefficients was shown to be most effective, despite the substantial year‐to‐year variation in measured vegetation coefficients. The temporal variability of available water (precipitation minus ET) at the humid, subtropical site was largely controlled by the relatively high temporal variability of precipitation, benefiting the effectiveness of coarse ET approximations, a result that is likely to prevail at other humid sites.