Germination test on Komatsuna (Brassica rapa var. peruviridis) seed using water extract from compost for evaluating compost maturity: evaluating criteria for germination and effects of cultivars on germination rate

Germination tests on the Komatsuna (Brassica rapa var. peruviridis) seed using water extract from compost has often been performed in Japan to evaluate compost maturity; however, most of the germination tests have been carried out without using any rationally defined experimental criteria to determine germination and to explain the influence of cultivars. Here, we performed a series of germination tests to examine the applicability of the experimental criteria for germination and the influence of cultivars on germination rate. Germination rate varied according to the criteria introduced in this paper, and two criteria, "seed size (3)" and "5?mm (2)", were selected for testing. In addition, two types of inhibitory influence, stop and slowness, were observed and compared with the criteria. The logistic regression curve of Logit, a function of germination rate to logarithmic value of the dilution ratio of the water extract was parameterized to compare the effects of the cultivars on germination rate. The statistical analysis of the parameters showed that dilution ratio greatly influenced germination rate, and the cultivar itself also influenced the rate. Consequently, the specific experimental criteria for germination and determining the influence of cultivars were proven to be indispensable for evaluating compost maturity using the germination test.     

Evaluation of maturity parameters and heavy metal contents in composts made from animal manure

The objective of this study was to evaluate a variety of maturity indices and heavy metal concentrations in the composting process. A full-scale study was performed on animal manures (dairy:beef:swine = 50%:30%:20%, w/w) mixed with sawdust using a self-screwed turner over a time period of 63 days. Several chemical compost characteristics and germination indices were monitored on samples collected weekly at a prototype composting facility. NH(4)-N concentrations decreased during the composting time, on the contrary NO(3)-N concentrations increased sharply after 30 days. As composting proceeded, the humic acids content increased from 1.45% to 2.70% of the organic carbon content, whereas the fulvic acids content decreased gradually. Temperature in the compost pile and concentration of NH(3) averaged 32.4 degrees C and 12.9 ppm at the initial composting phase and 69.5 degrees C and 47.3 ppm at the active bio-oxidation composting phase, respectively. Seed germination and germination index (GI) increased during the composting process, and the compost samples at the end of composting phase had GI values greater than 120. Among the composting processes, there were significant differences (p<0.05) in concentration of Zn, Cu and Pb in the compost. In conclusion, the suggested maturity parameter values and metal concentrations of composted animal manures can provide better understanding of maturation process of animal manure compost.     

Effect of the mixing ratio on the composting of OFMSW digestate: assessment of compost quality

This study presents the results obtained in compostability tests of organic fraction of municipal solid waste (OFMSW) digestate. The final aim was to obtain mature compost without phytotoxic effects. For the evaluation of the composting process, a novel parameter describing the performance of the composting process, the relative heat generation standardized with the initial volatile solid content (RHGVS₀), was defined and evaluated at laboratory-scale. From these laboratory-scale test, the optimum operational conditions were obtained, a mixing ratio (v/v) of 1:1:0 (bulking agent:digestate:co-substrate) and with 15% of mature compost as inoculum. Subsequently, these optimum operational conditions were applied in the active phase of the composting pilot-scale reactor. The active composting stage took 7 days, subsequently a curing phase of 60 days was carried out at ambient conditions. After 30 days of curing, the mature compost showed a specific oxygen uptake rate (SOUR) of 0.14 mg O₂/g VS·h, a germination index (GI) of 99.63% and a low volatile fatty acids (VFA) concentration (41.3 AcH mg/kg_dm), being indicative of the good compost stability and maturity of the compost. The very good quality of the final compost obtained indicated that the RHGVS₀ accurately describes the performance of the composting process.

     

Effect of granular porous media on the composting of swine manure

This study investigated the feasibility of a bulking agent of granular porous media (GPM) for the composting of swine manure. Two lab-scale composting reactors were operated to evaluate the general performances and maturity parameters using GPM made of wastes from the Portland cement manufacturing processes as an alternative bulking agent. The overall volatile solid (VS) removal was 38.5% (dry basis). During the experiments, moisture content ranged between 41% and 53%, ensuring feasibility of microbial activity in composting. Cured compost showed proper maturity and low phytotoxicity, despite the slight decreases of CO(2) production and VS removal at the second batch operation. Various physico-chemical parameters of the cured compost met the regulatory standards reported elsewhere. The pH, carbon-to-nitrogen ratio, ammonia nitrogen and soluble organic carbon (SOC) of the cured compost were significantly correlated to the germination index (GI) using the seeds of Chinese cabbage and lettuce, indicating the progressive biodegradation of phytotoxins as well as organic matter. Consequently, the results obtained in this study demonstrate that GPM could contribute to the environmentally friendly and economical composting of problematic swine manure as a recyclable bulking agent.     

Techniques for the evaluation of maturity for composts of industrially contaminated lake sediments

Composting was applied as a bioremediation methodology for the reclamation of dredged sediments of Isnapur, Khazipally and Gandigudem lakes polluted with industrial wastes. The present study is an attempt to elaborate upon organic matter transformations and define the parameters for product maturity adapting chemical and spectroscopic methods during composting. The stability and maturity of sediments were evaluated by assessing parameters like C/N ratio, nitrification index (NH(4)-N/NO(3)-N), water-soluble organic carbon concentration, CO(2) evolution rate, cation exchange capacity and indices such as humification index, E4/E6 ratio, compost mineralization index (ash content/oxidizable carbon), germination index, dehydrogenase, polyphenoloxidase activities and FTIR spectroscopy. The results showed that the changes in the above chemical and biological parameters can be employed as reliable indicators of stability and maturity. The FTIR spectra revealed enrichment in the aromatic groups and a degradation of the aliphatic groups indicating stabilization of the final compost.     

Change of the chemical composition and biodegradability of the Van Soest soluble fraction during composting: A study using a novel extraction method

Van Soest fractionation is widely employed to characterize exogenous organic matter. The soluble fraction of Van Soest fractionation (SOL, extracted using hot water and then neutral detergent) often increases in line with compost maturity, although it is generally considered as labile. We have developed an alternative extraction method that comprises four successive steps (extraction using hot water, sodium tetraborate, dichloromethane/methanol and chelating resin) in order to clarify the chemical nature of the SOL fraction and explain its biodegradability. This method was tested on municipal solid waste compost sampled during the thermophilic phase (MSWi) and after 8 months of composting (MSWm). Both methods extracted similar proportions of organic matter. The composition of the residues was similar in MSWm although differences were noted for the extraction of polysaccharides and lipids in the case of MSWi. The hot water extractable fraction decreased during composting. Its high biodegradability in MSWi was linked to the high polysaccharide content revealed by pyrolysis–GC/MS and FTIR spectroscopy. The increase in the sodium tetraborate extractable fraction mainly explained the increase in the SOL fraction during composting. This was made up of N-containing compounds, polysaccharides and lipids in the immature compost, and a majority of N-containing compounds in the mature compost. During composting, the stabilization of organic matter in the SOL fraction extractable by sodium tetraborate and EDTA might principally involve N-containing structures through the formation of complexes of organic matter with metal ions, especially Ca²⁺, which may be broken down during extraction of the Van Soest soluble fraction. These mechanisms still need to be investigated.     

Kinetic Study Of The Composting Of Evergreen Oak Forestry Waste

The successive stages in the composting process of forestry waste from evergreen oak (Quercus ilx sbsp. ballota) were studied under controlled conditions (initial) carbon to nitrogen ratio = 30, T = 27°C). The original material was composted for 6 months and sampled every 15 days. The variables measured on the oak biomass in the course of the experiment showed different kinetics: the weight loss and germination index underwent a monotonic increase whereas the reducing sugars, phenols and E₄₆₅/E₆₆₅ extinction ratio of the water-soluble fraction stabilized at their lowest values after the first 2 weeks. Other variables, such as alkali solubility, water repellency, pH and particle size, showed maximum or minimum values at intermediate stages of the experiment. In contrast to the adverse agrobiological effects of the direct application to soil of the original waste, germination biotests and greenhouse experiments showed that plant response improved from the 2 first weeks of composting. The kinetics observed for the parameters studied suggested that the less favourable effect on plant yield may come from phytotoxic substances in compost but also from the microbial use of soil N required for the transformation of the most biodegradable compost fractions in special hemicelluloses.     

Comparison of several maturity indicators for estimating phytotoxicity in compost-amended soil

Compost can provide a rich organic nutrient source and soil conditioner for agricultural and horticultural applications. Ideal compost amendment rates, however, vary based on starting material and compost maturity or their interaction, and there is little consensus on appropriate methods to gauge maturity. In this study, electrical conductivity, carbon-to-nitrogen ratio, and carbon mineralization measurements were made on compost-amended soils and compared to phytotoxicity measured as cress (Lepidium sativum) germination. Cress germination in soil and compost mixtures incubated for 8-10 days significantly decreased with increasing electrical conductivity and carbon mineralization rate of the mixture and with carbon mineralization rate and mineralizable carbon associated with the compost. Cress germination was not related to carbon-to-nitrogen ratio or pH of soil and compost mixtures. The electrical conductivity of the soil and compost mixtures significantly decreased with decreasing mineralizable carbon suggesting that compounds contributing to electrical conductivity were present in the compost and decomposed upon soil amendment. The results of this study indicate that measurements of mineralizable carbon and mineralization rate of composts in soil, and electrical conductivity and mineralization rate of soil and compost mixtures, can be used as indicators of compost maturity.     

Composting anaerobic and aerobic sewage sludges using two proportions of sawdust

Sawdust has been proven to be a good bulking agent for sludge composting; however, studies on the most suitable ratio of sludge:sawdust for sludge composting and on the influence of the sludge nature (aerobic or anaerobic) on the composting reaction rate are scarce. In this study two different sewage sludges (aerobic, AS, and anaerobic, ANS) were composted with wood sawdust (WS) as bulking agent at two different ratios (1:1 and 1:3 sludge:sawdust, v:v). Aerobic sludge piles showed significantly higher microbial activity than those of anaerobic sludge, organic matter mineralization rates being higher in the AS mixtures. The lowest thermophilic temperatures during composting were registered when the anaerobic sludge was mixed with sawdust at 1:1 ratio, suggesting the presence of substances toxic to microorganisms. This mixture also showed the lowest decreases of ammonium during composting. All this matched with the inhibitory effect on the germination of Lepidium sativum seeds of this mixture at the first stages of composting, and with its low values of microbial basal respiration. However, the ANS+WS 1:3 compost developed in a suitable way; the higher proportion of bulking agent in this mixture appeared to have a diluting effect on these toxic compounds. Both the proportions assayed allowed composting to develop adequately in the case of the aerobic sludge mixture, yielding suitable composts for agricultural use. However, the ratio 1:1 seems more suitable because it is more economical than the 1:3 ratio and has a lower dilution effect on the nutritional components of the composts. In the case of the anaerobic sludge with its high electrical conductivity and ammonium content, and likely presence of other toxic and phytotoxic substances, the 1:3 ratio is to be recommended because of the dilution effect.     

Effect of amendments on windrow composting of sugar industry pressmud

Bioconversion of sugar and distillery industrial wastes with other biodegradables into enriched compost is an important possibility in need of research. In this paper, changes in temperature and physico-chemical (pH, NH4+-N, C/N ratio, CEC) parameters during windrow composting, related to biological stabilization of the compost, were studied. The rise in temperature, which occurred as composting progressed, was accompanied by an increase in NH4+-N and the passage of the thermophilic phase to mesophilic took place between 90 and 105 days. This overall pattern was observed in all composting mixes, whereby the concentrations of NH4+-N increased rapidly and then declined gradually over the course of monitoring pari passu with increase in NO3- -N. The C/N ratios of the composting mixes decreased substantially by the 90th day in full thermophilic phase and became comparatively stable later on. Addition of additives showed potential in improving the C/N ratios. Increases in cation exchange capacity (CEC) and the germination index value of a sensitive crop (Raphanus sativus) had value in establishing the optimum degree of maturity. The rise and fall of temperature and changes in NH4+-N concentrations, C/N ratios and CEC over time proved to be reliable indicators of the progress of the composting process for establishing biological stability and compost maturity.     

PLA and Organoclays Nanocomposites: Degradation Process and Evaluation of ecotoxicity Using Allium cepa as Test Organism

In this study, nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by the melt intercalation method and the obtained samples were characterized by transmission electron microscopy (TEM). Since composting is an important proposal to the final disposal of biopolymers, the influence of clays on the hydrolytic degradation process of PLA was evaluated by visual analysis and monitoring of molecular weight after periods of 15 and 30 days of degradation in compost. After degradation of the materials in composting environment, the evaluation of cytotoxic, genotoxic and mutagenic effects of compost aqueous extract was carried out using a bioassay with Allium cepa as test organism. The TEM micrographs permitted the observation of different levels of dispersion, including exfoliated regions. In the evaluation of hydrolytic degradation it was noted that the presence of organoclays can decrease the rate of degradation possibly due to the barrier effect of clay layers and/or the higher degree of crystallinity in the nanocomposite samples. Nevertheless, even in the case of nanocomposites, the molecular weight reduction was significant, indicating that the composting process is favorable to the chain scission of PLA in studied materials. In the analysis performed by the bioassay using A. cepa as test organism, it was found that after degradation of the PLA and its nanocomposites the aqueous extract of compost samples induced a decreasing in the mitotic index and an increasing in the induction of chromosomal abnormalities. These results were statistically significant in relation to the negative control (distilled water). By comparing the results obtained for the nanocomposites in relative to pure polymer, there were no statistically significant differences. The types of the observed chromosomal aberrations indicated a possible genotoxic effect of the materials, which may be related to an aneugenic action of PLA degradation products.     

Assessment of compost quality for its environmentally safe use by means of an ecotoxicological test on a soil organism

A research project was carried out to evaluate toxicological effects of compost addition to agricultural soil using the earthworm Eisenia foetida (Annellida) as a representative organism of the soil fauna. Moreover, the correlation between compost biochemical stabilization and toxicity at different phases of the composting process was assessed. Samples were collected from three composting plants at three different maturation levels (beginning of the composting process, intermediate compost after bio-oxidation, and mature refined compost). Two tests were performed: a standard chronic solid-phase test and an acute solid-phase test (developed originally by the authors). In the first test, the measured end-points were mortality, growth and reproduction; while in the second test earthworms’ behavior was evaluated. The chosen compost concentrations in soil ranged from 2.5 to 100 %, with the aim of obtaining the toxicological parameters (LC50) and to mimic real agricultural dosages for the lower concentrations. Results indicated an increase in compost toxicity with greater compost concentrations; in particular, agricultural compost dosage below 10 % showed no toxicity. Moreover, toxicity did not decrease during composting; intermediate compost showed the highest LC50 values. As a consequence, no correlation was ascertained between the results of ecotoxicological analysis and waste biochemical stability parameters during the composting process.     

Recycling of waste biomass and mineral powder for preparation of potassium-enriched compost

An attempt was made to recycle waste biomass and mineral powder (waste mica) as an alternative source of potassium (K) through composting technology. Two different waste biomass, isabgol straw and palmarosa distillation waste along with two levels of waste mica (2 and 4% as K) were used for preparation of enriched composts. A notable decrease of C:N ratio was observed at the end of the composting (150 days) as an indicator of compost maturity. The mature composts were evaluated for K-supplying capacity through laboratory leaching and soil incubation study. Significantly higher water-soluble K released initially followed by a sharp decrease up to 21 days of leaching thereafter gradually decreased up to 35 days of leaching. Water-soluble K was released from K-enriched (mica charged) compost significantly higher than the ordinary compost throughout the leaching period. Soil incubation study also revealed that application of K-enriched compost greatly improved the available K (water soluble and exchangeable) pools in K-deficient soil which indicated that a considerable amount of K releases during composting. Therefore, K-enriched compost could be an effective alternative of costly commercial K fertilizer and eco-friendly approach to utilize low-cost waste mineral powder and plant residue.     

A statistical analysis to assess the maturity and stability of six composts

Despite the long-time application of organic waste derived composts to crops, there is still no universally accepted index to assess compost maturity and stability. The research presented in this article investigated the suitability of seven types of seeds for use in germination bioassays to assess the maturity and phytotoxicity of six composts. The composts used in the study were derived from cow manure, sea weeds, olive pulp, poultry manure and municipal solid waste. The seeds used in the germination bioassays were radish, pepper, spinach, tomato, cress, cucumber and lettuce. Data were analyzed with an analysis of variance at two levels and with pair-wise comparisons. The analysis revealed that composts rendered as phytotoxic to one type of seed could enhance the growth of another type of seed. Therefore, germination indices, which ranged from 0% to 262%, were highly dependent on the type of seed used in the germination bioassay. The poultry manure compost was highly phytotoxic to all seeds. At the 99% confidence level, the type of seed and the interaction between the seeds and the composts were found to significantly affect germination. In addition, the stability of composts was assessed by their microbial respiration, which ranged from approximately 4 to 16 g O₂/kg organic matter and from 2.6 to approximately 11 g CO₂–C/kg C, after seven days. Initial average oxygen uptake rates were all less than approximately 0.35 g O₂/kg organic matter/h for all six composts. A high statistically significant correlation coefficient was calculated between the cumulative carbon dioxide production, over a 7-day period, and the radish seed germination index. It appears that a germination bioassay with radish can be a valid test to assess both compost stability and compost phytotoxicity.     

Effect of C/N ratio on the in-vessel composting under air pressure of organic fraction of municipal solid waste in Morocco

The goal of this research was to investigate the effect of the C/N ratio on the in-vessel composting, under air pressure, of organic fraction of municipal solid waste in Morocco. Firstly, an in-vessel bioreactor was designed and used to evaluate the appropriate initial pressure for the composting process. Secondly, five bioreactors were run with C/N ratios of 26 (control; no C supplement), 32.2, 38.4, 44.6, and 50.8. Parameters monitored included internal air pressure, C/N ratio, temperature, volatile solids reduction, and maturity of the obtained composts. The relative microbial activity was observed indirectly using volatile solids removal and the relative heat generation data. The experimental results showed that organic waste could be composted within 10?days and the operating initial parameters that converted the most volatile solids and carbons in the feedstock were as follows: 0.6?×?10⁵ Pa for the initial air pressure and 26 for the C/N ratio. Maturity tests, in optimal conditions, showed that the final compost has characteristics of stable compost and can be used as a soil conditioner. In addition, compost obtained from the experiment that considered a C/N ratio of 32.2 showed good maturity levels and may also be used for agricultural applications.     

Microbial succession associated with organic matter decomposition during thermophilic composting of organic waste.

Using dog food as a model of the organic waste, thermophilic composting was carried out for 14 days at a fixed temperature of 60 degrees C. The relationship between organic matter decomposition measured by CO2 evolution during the bio-stabilization process and microbial succession expressed as the changes over time in the restriction fragment length polymorphism (RFLP) patterns of 16S rDNA sequences, of micro-organisms associated with the composting material was also examined. The CO2 evolution rate peaked on day 3 and gradually decreased until it became extremely small after day 9 of composting, indicating that vigorous organic matter decomposition ceased around this time. On the other hand, the RFLP pattern changed drastically from day 0 to day 4 or 5, then remained stable until day 7 or 8, reaching its final configuration, with little variations, after day 9 of composting. RFLP analysis therefore indicates that microbial succession continued into the later stage of composting. Nevertheless, by day 9, the rate of organic matter decomposition was so low that its influence on microbial populations could be hardly recognized by conventional methods of dilution plating. Moreover, the compost produced by day 9 showed no inhibitory effect on the growth of Komatsuna (Brassica campestris L. var. rapiferafroug), indicating that the maturity of compost is sufficient for plant growth when the rate of organic matter decomposition has become extremely low and the RFLP patterns become stable.     

Effect of the composting substrate on biodegradation of solid materials under controlled composting conditions

Biodegradability under composting conditions is assessed by test methods, such as ASTM D 5338-92, based on the measurement of CO₂ released by test materials when mixed with mature compost and maintained in a controlled composting environment. However, in real composting, biodegradation occurs in fresh waste. To clarify this point, the biodegradation of paper and of a starch-based biodegradable thermoplastic material, Mater-Bi ZI01U, was followed by measuring the weight loss of samples introduced either into a mature compost or into a synthetic waste. The weight loss in mature compost was higher at the beginning but tended to decrease; in synthetic waste a first lag phase was followed by an exponential phase. Complete degradation of paper was noticed simultaneously in the two substrates (after 25 days). The bulkier Mater-Bi samples were fully degraded after 20 days in fresh waste, but after 45 days in mature compost. Therefore, the test methods using mature compost as a substrate can possibly underestimate the biodegradation rate occurring in fresh waste, i.e., in real composting plants, and have to be considered as conservative test methods. The test procedure described in this paper seems very suitable as a screening method to verify the compostability of plastic materials in a composting environment.     

Composting in small laboratory pilots: performance and reproducibility

Small-scale reactors (<10 l) have been employed in composting research, but few attempts have assessed the performance of composting considering the transformations of organic matter. Moreover, composting at small scales is often performed by imposing a fixed temperature, thus creating artificial conditions, and the reproducibility of composting has rarely been reported. The objectives of this study are to design an innovative small-scale composting device safeguarding self-heating to drive the composting process and to assess the performance and reproducibility of composting in small-scale pilots. The experimental setup included six 4-l reactors used for composting a mixture of sewage sludge and green wastes. The performance of the process was assessed by monitoring the temperature, O₂ consumption and CO₂ emissions, and characterising the biochemical evolution of organic matter. A good reproducibility was found for the six replicates with coefficients of variation for all parameters generally lower than 19%. An intense self-heating ensured the existence of a spontaneous thermophilic phase in all reactors. The average loss of total organic matter (TOM) was 46% of the initial content. Compared to the initial mixture, the hot water soluble fraction decreased by 62%, the hemicellulose-like fraction by 68%, the cellulose-like fraction by 50% and the lignin-like fractions by 12% in the final compost. The TOM losses, compost stabilisation and evolution of the biochemical fractions were similar to observed in large reactors or on-site experiments, excluding the lignin degradation, which was less important than in full-scale systems. The reproducibility of the process and the quality of the final compost make it possible to propose the use of this experimental device for research requiring a mass reduction of the initial composted waste mixtures.     

Effect of vermiculite addition on compost produced from Korean food wastes

To evaluate the effect of vermiculite addition on composting food wastes from Korean households, food wastes were composted in three small bins to which different additives were added. The following three bins were employed: in Case I, only recycled compost was composted; in Case II, food wastes with recycled compost; and in Case III, food wastes with recycled compost and vermiculite. In the experiment performed for 30 days, it was confirmed that the supplementary addition of vermiculite to the composting mixture did not significantly improve the weight loss rate and the decomposition rate of food wastes. Due to dilution through the use of inorganic vermiculite, the vermiculite addition reduced the organic matter concentration of the composting mixtures. Vermiculite addition did not raise the pH value. Weight losses of roughly 70% were observed based on calculating moisture loss as well as dry food waste loss and not considering additives, while dry food waste loss was 29.4% and 35.8% with and without the addition of vermiculite, respectively. For these experiments, the major portion of the weight loss was the loss of water. The results indicate a need to differentiate between weight loss percentages and decomposition percentages, and a need to indicate if either of these percentages includes or excludes the mass of additives.     

Composting toilets as a sustainable alternative to urban sanitation – A review

In today’s flush based urban sanitation systems, toilets are connected to both the centralized water and wastewater infrastructures. This approach is not a sustainable use of our water and energy resources. In addition, in the U.S., there is a shortfall in funding for maintenance and upgrade of the water and wastewater infrastructures. The goal of this paper was to review the current knowledge on composting toilets since this technology is decentralized, requires no water, creates a value product (fertilizer) and can possibly reduce the burden on the current infrastructure as a sustainable sanitation approach. We found a large variety of composting toilet designs and categorized the different types of toilets as being self contained or central; single or multi chamber; waterless or with water/foam flush, electric or non-electric, and no-mix or combined collection. Factors reported as affecting the composting process and their optimum values were identified as; aeration, moisture content (50–60%), temperature (40–65 °C), carbon to nitrogen ratio (25–35), pH (5.5–8.0), and porosity (35–50%). Mass and energy balance models have been created for the composting process. However there is a literature gap in the use of this knowledge in design and operation of composting toilets. To evaluate the stability and safety of compost for use as fertilizer, various methods are available and the temperature–time criterion approach is the most common one used. There are many barriers to the use of composting toilets in urban settings including public acceptance, regulations, and lack of knowledge and experience in composting toilet design and operation and program operation.