High nitrite accumulation and strengthening denitrification for old-age landfill leachate treatment using an autocontrol two-stage hybrid process

An autocontrol two-stage hybrid process was developed to treat landfill leachate. Biological nitrogen removal with nitrification and denitrification via nitrite pathway was split into two stages. The first stage was designed for the high nitrite accumulation and was composed of two hybrid bed reactors (Hybrid I and Hybrid II) and a coagulation–flocculation reactor having effective volumes of 120 L and 80 L, respectively. The second stage was designed for strengthening denitrification and included a single 80 L reactor. The carriers of the hybrid bed reactors were composed of fixed multiple flexible carriers and suspended particle carriers. Dissolved oxygen (DO), pH value, oxidation–reduction potential (ORP) and temperature were used as online fuzzy control parameters of the automatic control system. The concentration of nitrite in Hybrid I and Hybrid II could reach 411 mg L⁻¹ and 604 mg L⁻¹, respectively. Ammonia removal has reached maximal rates of 0.061 kgNH₄⁺-N (m³ h)⁻¹ and 0.041 kgNH₄⁺-N (m³ h)⁻¹, respectively. A maximum nitrite removal rate of 0.211 kgNO₂⁻-N (m³ h)⁻¹ was observed during the strengthening denitrification. The running time of one cycle was not fixed and was actually controlled by the system. The results indicated that the running period was more closely related to influent ammonia concentration than influent COD concentration. The aeration times could be shortened and the energy could be saved. The autocontrol two-stage hybrid process is therefore an economical and effective way for landfill leachate treatment.     

Absorption kinetics of NO from simulated flue gas using Fe(II)EDTA solutions

The absorption of NO encountering flue gases in aqueous solutions of Fe(II)EDTA was determined using a semi-batch stirred tank with a plane gas–liquid interface at 50 °C. The concentrations of NO, SO₂ and O₂ in the feeding stream were 300–800 ppm, 500–2200 ppm and 0–20%, respectively. The pH value of the Fe(II)EDTA solutions varied from 3 to 11. The concentrations of Fe(II)EDTA were maintained between 0.01 and 0.05 M. Experiments were performed to evaluate the effect of operating parameters on the NO absorption rate, the reaction kinetics of the reactants in gas and liquid phases, and the effect of competition between various reactants on the mass transfer rate in the NO removal system. Results indicate that the average reaction rate constant is 3.70 × 10⁷ M⁻¹ s⁻¹. Adding NaOH does not increase the absorption capability of Fe(II)EDTA. The presence of O₂ decreases the NO absorption rate with Fe(II)EDTA. The absorption rate of NO with Fe(II)EDTA decreases at low concentrations of SO₂, but increases at high concentrations.     

Improved VOC bioremediation using a fluidized bed peat bioreactor

A gas–solid fluidized bed bioreactor was successfully used to treat air contaminated with a volatile organic compound (VOC). A bioreactor containing both a fluidized and packed bed of moist peat granules removed ethanol, a representative VOC, from an air stream. The fluidized bed operation mode of the bioreactor outperformed the packed bed mode. The maximum elimination capacity (EC) of ethanol in the fluidized mode was 1520 g m⁻³ h⁻¹, with removal efficiencies ranging between 45 and 100%, at loadings up to 3400 g m⁻³ h⁻¹. Maximum EC was 530 g m⁻³ h⁻¹ in the packed bed mode. Removal efficiency in the fluidized bioreactor was best at the lowest velocity, where the bubbling bed fluidization regime predominated. As gas velocity increased, the size and amount of large bubbles (slugs) increased and removal efficiency decreased while elimination capacity increased.     

Removal of Cr(VI) from simulative contaminated groundwater by iron metal

The Cr(VI) removal from simulative contaminated groundwater using zero-valent iron (Fe⁰) filings, Fe⁰ powder and nanoscale Fe⁰ in batch experimental mode was studied. Cr(VI) is a primary pollutant of some soils and groundwater. Zero-valent iron, an important natural reductant, could transform Cr(VI) to Cr(III) which is much less toxic and immobile. The Cr(VI) removal percentage was 87% at a metal to solution ratio of 6 g l⁻¹ for commercial iron powder (200 mesh) in 120 min, and 100% Cr(VI) was removed when the metal to solution ratio was 10 g l⁻¹. The results demonstrates that the Cr(VI) removal percentage was affected apparently by pH, the amount of Fe powder and the reaction temperature. The Cr(VI) removal percentage with nanoscale Fe⁰ was much higher than those with Fe⁰ filings or Fe⁰ powder at the same reaction time. Electrochemical analysis of the reaction process led to the conclusion that the Cr(VI) trended to form Cr(III) hydroxide under the reaction conditions. The kinetics analysis showed that Cr(VI) reduction by Fe⁰ could be described as a pseudo-first-order kinetics model.     

Modification of Fe–Mn mixed oxide COS removal sorbent by rare-earth oxides addition

In order to develop highly active sorbent for COS removal, Fe–Mn mixed oxides doped with CeO₂, La₂O₃ or Sm₂O₃ were studied. The effects of these promoters on the structural properties of Fe–Mn oxides were investigated by XRD, BET, TPR and TEM techniques. XRD results revealed that the degree of crystallinity of Fe–Mn oxide phase decreased due to the addition of rare-earth oxides. Doping with CeO₂, La₂O₃ or Sm₂O₃ led to an increase in BET surface area of the sample. TPR studies showed that the reactivity of the reduction of doped samples increased in the temperature range of 300–450 °C. In addition, the desulfurization test was performed at 325 °C with a gas hourly space velocity of 1000 h⁻¹. It was found that the addition of 3% La₂O₃ greatly improved the absorption sulfur capacity of the sorbent, while the sorbent doped 3% CeO₂ achieved a sufficiently high purifying degree before breakthrough.     

Adsorption of copper and nickel on Na-bentonite

The removal of copper and nickel from aqueous solution on the Na-bentonite has been studied under static conditions. Experiments were carried out as a function of solution pH, dosage of Na-bentonite, contact time and temperature. The adsorption equilibrium for nickel and copper onto Na-bentonite is reached in 200 min. The adsorption of copper and nickel is pH dependent in the pH range 2–9. The kinetic process of adsorption can be described by the pseudo-second-order kinetic equation excellently and the adsorption isotherm be fitted to the Langmuir model by means of regression analyses very well. The adsorption capacities follow the order of Cu²⁺ > Ni²⁺ in single-component systems and competitive adsorption capacities in order decreasing is Cu²⁺ > Ni²⁺ in binary-component systems.     

Two-stage biodegradation coupled with ultrafiltration for treatment of municipal landfill leachate

The municipal landfill leachate was treated in a hydrolysis–acidification reactor (HAR)/aerobic bio-contact oxidation reactor (ABOR) following a pretreatment with ultrafiltration (UF) membrane. Experiments were conducted continuously for 44 days at a constant flow rate of 20 l d⁻¹ and organic loading rates (OLRs) from 0.75 to 1.5 kgCOD m⁻³ per day. The results showed that COD of the leachate steadily decreased from 20,015 mg l⁻¹ to less than 3000 mg l⁻¹, and NH₄-N decreased from 368.6 mg l⁻¹ to 259.3 mg l⁻¹ in the UF process. The COD and NH₄-N removal efficiency of HAR was 56.7% and 27.7%, and that of ABOR was 94.6% and 86.7%, respectively. The total COD and NH₄-N removal efficiency reached 99.6% and 93.2%, respectively. UF and HAR played a critical role in raising the biodegradability of the landfill leachate, while ABOR had an important function on removing the dissolved NH₄-N in leachate.     

An Experimental Study on Pyrolysis of Biomass

In this study, pyrolysis of sugarcane bagasse was performed in fixed bed tubular reactor under the conditions of nitrogen atmosphere, by varying temperature and different particle sizes. The effect of final pyrolysis temperature from 400 to 500°C and the nitrogen flow rate from 50 to 200 cc min⁻¹ on the pyrolysis product yields from sugarcane bagasse have been investigated. The Maximum bio-oil yield obtained is 24.12 wt% at the final pyrolysis temperature of 450°C, N₂ flow rate of 50 cc min⁻¹ and particle size of mesh number −8 + 12. The yield of bio-oil decreases with increase in temperature from 450 to 550°C and N₂ flow rate from 50 to 200 cc min⁻¹. The various characteristics of pyrolysis oil obtained under these conditions were identified on the basis of standard test methods. The empirical formula of pyrolysis oil with a heating value of 37.01 MJ Kg⁻¹ was established as CH_1.434 O_0.555 N_0.004. The results from the pyrolysis show the potential of sugarcane bagasse as an important source of liquid hydrocarbon fuel.     

Kinetics and equilibrium adsorption study of lead(II) onto the low cost adsorbent—Eupatorium adenophorum spreng

Adsorption of Pb(II) ions from aqueous solution onto a low cost adsorbent—the Eupatorium adenophorum spreng has been investigated to evaluate the effects of initial lead ion concentration, contact time, pH and temperature on the removal of Pb(II) systematically. The optimal pH value for Pb(II) adsorption onto the E. adenophorum spreng was found to be 5.0. Thermodynamic parameters such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) were evaluated by applying the van’t Hoff equation, which describes the dependence of equilibrium constant on temperature. The thermodynamics of Pb(II) adsorption onto the E. adenophorum spreng indicated that the adsorption was spontaneous and endothermic. Langmuir and Freundlich isotherms were used to analyze the equilibrium data at different temperatures and the equilibrium data were found to fit Freundlich isotherm equation better than Langmuir isotherm. The adsorption was analyzed using pseudo-second-order kinetic models.     

Modification of ferrite–manganese oxide sorbent by doping with cerium oxide

Fe–Mn oxide and Ce-doped Fe–Mn oxide sorbents were studied on the structural and desulfurization behavior in COS removal from syngas. The effects of cerium oxide on the Fe–Mn oxides have been investigated by XRD, BET, TPR, XPS and TEM methods. Analysis data show that the Ce-doped sorbent has larger specific surface area and better particles’ dispersion compared with non-modified Fe–Mn sorbent. The addition of Ce improves the reduction performance of Fe–Mn species. The desulfurization experiments show that the desulfurization activity of sorbent can be increased because of the promotion of the structural and redox properties by ceria doped. The Ce-doped sorbent can reduce COS from 15,000 ppmv to less than 0.1 ppmv at 325 °C and a space velocity of 1000 h⁻¹.     

Biosorption of zinc(II) on rapeseed waste: Equilibrium studies and thermogravimetric investigations

The removal of heavy metals from aqueous effluents so as to avoid their toxic, bioaccumulation and biomagnification effects to humans and environment is usually realized by means of physical, chemical treatment, and biological processes. The aim of this study is to evaluate the potential of rapeseed waste from biodiesel production as a biosorbent for Zn(II) ions.The ability of the rapeseed waste for Zn(II) biosorption exhibited a maximum at pH 4.5–5. The removal efficiency of Zn(II) from solution with an initial concentration of 72 mg L⁻¹ varied from 39% to 89% for an increase of the rapeseed waste dose from 2 to 30 g L⁻¹. The amount of Zn(II) retained on the tested rapeseed increased with increasing metal ion concentration, but the Zn(II) sorption percentage decreased. The equilibrium data are fitted to the Langmuir isotherm better than to the Freundlich isotherm. The kinetics of Zn(II) biosorption process follows a pseudo-second order model. The thermal stability of the rapeseed before and after Zn(II) biosorption was studied by thermogravimetric analysis. It was found that the zinc loaded rapeseed exhibits a better initial thermal stability than the original rapeseed, presumably due to the cross linking generated by the intermolecular complexation of Zn(II) ions. In both cases, the thermal decomposition takes place according to some reassembling kinetic models, in two phases with order n reactions. The results of this study strongly suggest the possibility to use rapeseed as an effective biosorbent for Zn(II) ions removal from aqueous effluents (municipal/industrial wastewaters).     

Evaluation of Abelmoschus esculentus (lady's finger) seed as a novel biosorbent for the removal of Acid Blue 113 dye from aqueous solutions

The use of a new biosorbent derived from Abelmoschus esculentus (A. esculentus) seed for the removal of Acid Blue 113 (AB113) in aqueous solutions was investigated in batch mode. Biosorption studies were carried out under varying operational parameters including initial pH, biosorbent dosage, contact time, initial dye concentration and temperature. The results indicated that the biosorption properties were strongly dependent on initial pH. Fourier transform infrared spectroscopy analysis revealed that hydroxyl, carboxylic and amide functional groups present on the biosorbent surface were involved in the dye removal process. Equilibrium data were best fitted by the Langmuir model. The maximum biosorption capacity was 169.9 ± 3.1 mg g⁻¹ at 25 °C and initial pH 5.5. The kinetic data were in good agreement with the pseudo-second-order kinetic model. The process was controlled by diffusion through boundary layer at the initial stage followed by intra-particle diffusion at the later stage. Thermodynamic evaluation showed that the process was endothermic and spontaneous. The present study suggests that A. esculentus seed with maximum biosorption capacity which compared well with values reported in the literature can be a potential biosorbent for AB113 dye removal.     

Biodiesel production from waste oil feedstocks by solid acid catalysis

Biodiesel is a non-toxic and biodegradable substitute for petroleum-based diesel. However, it is impractical to use refined edible oils to produce biodiesel due to its high cost and priority for food products, especially in China, while waste oils with high free fatty acids (FFAs) can be considered as the raw materials. In the present work, a solid acid catalyst comprising SO₄²⁻/TiO₂–SiO₂ was prepared, characterized and studied for its activity for the production of biodiesel from several low cost feedstocks with high FFAs. The solid acid catalyst can be recycled, easily removed and can simultaneously catalyze esterification and transesterification. The influence of reaction parameters was studied, and the optimized reaction parameters are reaction temperature 200 °C, molar ratio of methanol to oil 9:1 and catalyst concentration 3 wt.%. The catalyst showed good stability. A continuous process for biodiesel production from cheap raw feedstocks was proposed, and a 10,000-tonnes/year biodiesel production demonstration plant has been built.     

Removal of H2S by co-immobilized bacteria and fungi biocatalysts in a bio-trickling filter

Biological control of odor gases has gained more attention in recent years. In this study, removal performance of a vertical bio-trickling filter inoculated with bacteria and fungi was studied. Bacteria and fungi were isolated from activated sludge in a sewage treatment plant. By adopting “three step immobilization method”, the bio-trickling filter could degrade pollutant immediately once hydrogen sulfide (H₂S) passed. The optimal empty bed resident time was 20 s. The optimal elimination capacity was about 60 g H₂S m^?3 h^?1 with removal efficiency of 95%. And the maximum elimination capacity was 170 g H₂S m^?3 h^?1. Pressure drop was ranged between 5 and 15 mm H₂O per bed over the whole operation. Removal efficiency was not affected obviously after terminating nutrient supply. The bio-trickling filter could recover back after shut down H₂S gaseous and liquid supplies simultaneously. Microbial community structure in the bio-trickling filter was not changed significantly.Combining bacteria and fungi would be a better choice for inoculation into a bio-trickling filter because of the quickly degradation of H₂S and rapid recovery under shut-down experiment. This is the first study attempting to combine bacteria and fungi for removal of H₂S in a bio-trickling filter.     

Zero valent nano-sized iron/clinoptilolite modified with zero valent copper for reductive nitrate removal

Nitrates constitute one of the main toxic contaminants of groundwater. On the other hand, groundwater may be considered anoxic (oxygen concentration less than 9 μg L^?1). This fact justifies the use of nano zero valent metals for nitrate removal. In such conditions, zero valent metals are quite stable against oxidation due to the very low level of dissolved oxygen concentration. It has been shown that the performance of zero valent iron coated clinoptilolite zeolite for the reduction of nitrate anion in un-buffered conditions may be enhanced by coating small amounts of Cu⁰ onto the freshly prepared Fe⁰/zeolite composite. An optimum loading of Cu⁰ exists for which the rate of nitrate removal is maximal. For this optimal composition, the nitrite anion production curve with time passes through a maximum. Nitrite production, however, is slightly higher for the Cu modified zeolite. It has been shown that the nitrate removal process is only slightly dependent on the initial solution pH. In the temperature range of 20–60 °C, the process is controlled by both the liquid phase mass transfer and intrinsic reaction rate resistances. FESEM analysis of the zero valent metal/zeolite composite showed that upon the metal reduction reaction, an egg-shell distribution of zero valent metal in the zeolite agglomerate particle is produced.     

Evaluation of decentralized treatment of sewage employing bio-contact oxidation reactor integrated with filter bed

A bio-contact oxidation reactor integrated with filter bed (COR-FB) was developed for decentralized treatment of sewage, which consisted of a biofilm reactor and a gravitational filter bed. It has been investigated to treat municipal wastewater for reuse. The evaluation of COR-FB performance demonstrates that it produced good quality effluent regarding carbonaceous compound, nitrogenous compound, suspended solid and fecal coliform. The efficiencies of COD, NH₄⁺-N, TN, TP and turbidity removal were 90.7%, 81.4%, 64.6%, 60.1% and 96.7%, respectively. The residual geometric mean of fecal coliform counts in the final effluent of COR-FB was only 7.8 × 10³ MPN/10³ ml, corresponding to removal value of 3.8 log 10. However, TP removal indicates the necessity of an addition of a bagger and mud valve or an enhanced chemical phosphorus removal prior to treated water reuse. Microfauna communities were monitored in COR-FB, which was found to contain 5 genres and 19 species in the biofilm layer. Also, a simple kinetics model for COR-FB was developed based on the influent, effluent soluble COD concentration and the reaction time by regression simulation. In general, available data proved that COR-FB system can be recommended as a compact and cost-effective technology for decentralized treatment of sewage, especially for developing countries.     

Preliminary study of ballistic impact on an industrial tank: Projectile velocity decay

Since the events of September 11, 2001, the possibility of an intentional act targeting the chemical process industry has become realistic. It is, therefore, a great concern to be able to predict the immediate consequences of such an act. This study is intended to improve our knowledge about the sequence of events that occurs when a high-speed bullet (>1000 m s⁻¹) penetrates a vessel filled with toxic liquid. We find that, prior to liquid ejection, several well-defined phases occur, including the phenomenon known as the “hydraulic ram.” This paper focuses on projectile–target interactions and explains how the decay of projectile velocity is related to the initial conditions of the target.     

On–off control of aeration time in the simultaneous removal of ammonia and manganese using a biological aerated filter system

The biological aerated filter (BAF) system, a new alternative in drinking water treatment, was designed to remove NH₄⁺–N and Mn²⁺ simultaneously. This study aimed to control the aeration time in the BAF system for simultaneous NH₄⁺–N and Mn²⁺ removal to achieve the Malaysian effluent quality regulation for drinking water. The experiment was conducted under four strategies of S1, S2, S3 and S4. The results demonstrated that acceptable levels of NH₄⁺–N and Mn²⁺ were achieved over a 6 h aeration period (S1), producing effluent concentrations of 0.7 mg/L (93.2% removal) and 0.08 mg/L (79.6% removal), respectively. At the initial treatment of S1 and S2, the dissolved oxygen (DO) level rapidly increased until it reached a saturated concentration (6.8 mg/L DO) after 2 h period. Automatic on–off aeration time to maintain 3 mg/L DO set point (S4) resulted with a good effluent quality of NH₄⁺–N and Mn²⁺ compared with the 2 mg/L DO set point (S3) which did not meet the regulated standard limits. Through the automatic on–off aeration time, the saturated and excessive DO levels in the BAF system can be avoided consequently reduce the wastage of energy and electrical consumption for simultaneous NH₄⁺–N and Mn²⁺ removal from drinking water treatment.     

Nanofiltration of concentrated and salted tuna cooking juices

Tuna cooking juice from a Tunisian tuna-processing unit has a high level of polluting load: chemical oxygen demand (COD) is comprised between 4 and 20 g L⁻¹, nitrogen kjedahl (NK) between 0.6 and 3 g L⁻¹ and dry matter between 120 and 160 g L⁻¹. The juice has thus to be treated before being rejected into the environment. This paper considers the nanofiltration (NF) of these concentrated organic/inorganic mixtures using an AFC 30 (NF) membrane. The work focusses on the effect of organic and inorganic matters on the permeate flux and rejections of these matters. For this purpose, mixtures of salt and organic pollution (COD), used as model solutions, were prepared by the dilution of a typical industrial tuna cooking juice. The permeate flux was found to decrease when salt and organic matter concentrations increase. The recovery rate in organic matter decreases with increasing salt or organic matter content and the recovery rate of salt decreases when the COD concentration increases.     

Enhanced NOx removal from flue gas by an integrated process of chemical absorption coupled with two-stage biological reduction using immobilized microorganisms

An integrated process of metal chelate absorption coupled with two stage bio-reduction using immobilized cultures has been proposed to continuously removal of NO_x, and the effects of SO₂, NO and O₂ concentration, gas/liquid flow rate on NO_x removal efficiency were investigated. Although nitrogen-containing components, such as Fe(II)EDTA-NO, NO₂^? and NO₃^? in the scrubbing solution, inhibited the bio-reduction of Fe(III)EDTA obviously, it was feasible to abate the inhibition effect by using the two stage bio-reduction system, and thus to improve NO_x removal efficiency. The removal efficiency decreased slowly with the increase of SO₂, O₂, NO concentration and gas flow rate, and increased with the increase of liquid flow rate. Continuously operating for 18 days, a high removal efficiency around 95% was reached by using the two-stage bio-reduction system with immobilized microorganisms, while the value decreased to 85% after 5 days of operation by using the suspended microorganisms, at a constant gas flow rate of 60 L/h containing 424–450 mg/m³ NO, 2428–2532 mg/m³ SO₂ and 3% O₂.