石家庄市经济-交通-环境系统耦合协调研究

河北省石家庄市空气污染较为突出,研究其经济-交通-环境3个系统间的耦合协调关系对区域可持续发展意义深远。选择耦合协调度模型、剪刀差方法,对2000—2016年石家庄经济-交通-环境系统的耦合协调程度和各系统之间演化方向、演化速率的差异进行全面分析。结果表明,2000—2016年石家庄经济-交通-环境系统的耦合协调指数由0.42增至0.77,表明研究期该区域3个系统的耦合协调关系逐步改善。从发展水平看,环境系统(0.53)交通系统(0.39)经济系统(0.35)。从演化方向看,经济与交通系统的发展趋势差异逐步缩小,经济与环境演化趋势差异逐步增大,交通与环境演化趋势差异缩小。从演化速率看,环境系统(0.01)经济系统(-0.04)交通系统(-0.11)。研究表明石家庄市环境质量加速改进,但经济发展、交通建设增速逐步放缓。     

水处理氧化还原过程的电动化学特性

以流动电流为参数,研究了水处理条件下氧化还原过程的电动化学特性.考察了水中KMnO_4及其与Mn~(2+),Fe~(2+)之间氧化还原作用的流动电流(SC)规律,探讨了氧化还原的初始条件、水处理环境、原水水质、氧化剂与还原剂的投加方式等对流动电流的影响.结果表明,水中约0.5mg·l~(-1)的KMnO_4可产生SC的峰值,而且当它与Mn~(2+)和Fe~(2+)经不同条件进行氧化还原作用时,可通过SC值的变化表现出更为明显的电动化学特性.     

污染源监测用一氧化氮和二氧氮标气的发生与制备

应用KNO_3—NaNO_3低共熔物于250℃恒电流电解,由电流值、载气流速的大小可制得不同浓度的NO_2标气,将其通过钼—碳催化转换器转换成NO标气.所得的NO_2、NO标气可用于核对分析方法及校正氮氧化物控制电位分析仪。     

尿酸的极谱研究

本文利用阴极溶出伏安法、循环伏安法以及普通直流极谱等方法研究了尿酸在硼砂溶液及Britton-Robinson缓冲液中的各种极谱行为。尿酸浓度在2×10~(-9)—9×10~(-5)M间与阴极溶出峰高成线性关系。尿酸在汞电极表面上与阳极极化产生的汞离子反应生成难溶化合物,从而导致阳极电流与阴极溶出峰的出现。循环伏安法等实验证明,在低扫描速率时(10—100mV/s)阴极过程受一级化学反应速率控制,在较高扫速下(200—1000mV/s)可转变为受扩散控制的过程。阳极电流对应于受扩散控制的过程。     

水处理氧化还原过程的电化动化学特性

以流动电流为参数。研究了水处理条件下氧还还原过程的电动化学特性，考察了水中ＫＭｎＯ４及其与ＭｎＯ２＋，Ｆｅ＾２＋之间氧化还原作用的流动电流（ＳＣ）规律，探讨了氧化还原的初始条件，水处理环境、原水水质、氧化剂与还原剂的投加方式等对流动电流的影响。结果表明，不中约０．５ｍｇ．ｌ＾－１的ＫＭｎＯ４可产生ＳＣ的峰值，而且当它与Ｍｎ＾２＋和Ｆｅ＾２＋经不同条件进行氧化还原作用时，可通过ＳＣ值的变化表现出更为     

对化学品登记要求的数据解释：—理化参数和生物降解

本文对化学品登记时所要求的理化和生物降解数据做了解释。涉及到的测试参数包括:紫外—可见光谱、熔点、沸点,蒸汽压曲线、水溶解度、吸附—解吸、分配系数(正丁醇—水)、液体和固体密度、颗粒物粒度分布、与 pH 有关的水解作用、在水中的离解常数和快速生物降解。     

可变电荷土壤和矿物对Pb~（2＋）和Cu~（2＋）的吸附动力学Ⅵ．搅拌速度和土

利用双离子选择电极法研究了搅拌速度和土／水比对Ｐｂ２＋和Ｃｕ２＋在可变电荷土壤和矿物表面的吸附动力学的影响。结果表明：当搅拌器上所加电压为０—１００Ｖ时，Ｐｂ２＋和Ｃｕ２＋的吸附转化率随电压的增加而增大；当电压＞１００Ｖ后，吸附转化率不再变化。这表明在＜１００Ｖ的低速搅拌下，外扩散是Ｐｂ２＋和Ｃｕ２＋吸附反应的速率控制步骤，而在＞１００Ｖ的高速搅拌下，吸附步骤为速率控制步骤。Ｐｂ２＋和Ｃｕ２＋的吸附量随土／水比的增大而减小。在二级动力学方程中，最大吸附量Ｘｍ随土／水比的增大而减小，动力学常数Ｋ随土／水比的增加而增大。Ｐｂ２＋的Ｘｍ和水／土比（ｍｌ／ｇ）呈极显著正相关。     

洞庭湖湿地水环境变化趋势及成因分析

采用经典的Mann-Kendall非参数统计检测方法对洞庭湖湿地1991—2009年的水环境重要参数进行了变化趋势分析。结果表明,电导率、COD、BOD5、总氮、总磷、悬浮物呈显著上升趋势,色度、大肠杆菌、硝态氮、铵态氮呈不显著上升趋势,溶解氧呈显著降低趋势,pH、透明度呈不显著降低趋势。可见,洞庭湖湿地水质在逐步下降。突变趋势中,各参数突变时期及次数存在明显差别。除色度有1突变点位于显著信度线（p=0.05）与极显著信度线（p=0.01）之间,其余参数突变点均位于显著信度线之间。以色度和悬浮物突变最频繁,总氮和硝态氮变化最为平缓,其余参数居中。从各参数突变发生的时间可知,水质突变主要发生在1992—1998年。其次,对影响洞庭湖湿地水环境变化的因素进行了分析,得出＂四水＂流域及洞庭湖区工业污染、农业污染（化肥污染、农药污染、水产养殖、畜禽粪便）、生活污染等是导致水环境逐步恶化的主要原因。     

洞庭湖湿地水环境变化趋势及成因分析

采用经典的Mann-Kendall非参数统计检测方法对洞庭湖湿地1991—2009年的水环境重要参数进行了变化趋势分析。结果表明,电导率、COD、BOD5、总氮、总磷、悬浮物呈显著上升趋势,色度、大肠杆菌、硝态氮、铵态氮呈不显著上升趋势,溶解氧呈显著降低趋势,pH、透明度呈不显著降低趋势。可见,洞庭湖湿地水质在逐步下降。突变趋势中,各参数突变时期及次数存在明显差别。除色度有1突变点位于显著信度线(p=0.05)与极显著信度线(p=0.01)之间,其余参数突变点均位于显著信度线之间。以色度和悬浮物突变最频繁,总氮和硝态氮变化最为平缓,其余参数居中。从各参数突变发生的时间可知,水质突变主要发生在1992—1998年。其次,对影响洞庭湖湿地水环境变化的因素进行了分析,得出四水流域及洞庭湖区工业污染、农业污染(化肥污染、农药污染、水产养殖、畜禽粪便)、生活污染等是导致水环境逐步恶化的主要原因。     

电解法处理含镍废水及纯镍的回收

采用电解回收法处理Ni2+含量为2g/L的废水,在阴极回收纯镍。研究了电解电流、极距、NH4Cl浓度、pH值等因素对Ni2+去除率、槽压、阴极能耗的影响,得出最优工艺参数为:温度20℃,电解时间20min时、电解电流300mA,极距15mm,NH4Cl浓度5g/L,pH值8.0,该条件下Ni2+去除率为96.926%,槽压16.21V,阴极能耗22.418kW.h/kg,在阴极可得到沉积6.45μm厚的镍板。     

Teil I: Braucht die Landwirtschaft Umweltmanagementsysteme?

The farming community is today faced with requests by various interest groups to implement environmental management systems (EMS). The series of items shows principle theoretical questions of the method and the advantages of EMS (part I and II), presents the practical outcome (part III) and give a recommendation for potential users of EMS in agricultural systems (part IV). The study conducted outlines the method of the implementing an EMS according to the Environmental Management and Audit System (EMAS) and ISO 14001. Further advantages and disadvantages for the agricultural industry are addressed. Even though terms such as site can not easily be defined or problems with open material cycles and structural particularity of agricultural farms there appears to be a benefit to implement. The transparency and documentation of the material flow as well as the economical benefits of an optimized organization count towards the EMS. Further EMS can be a means to strengthen the argumentative position for example with the public, authorities, banks or insurance. This concurs with minimizing company liabilities and obtaining governmental privileges (deregulation).     

Umweltmanagement im landwirtschaftlichen Betrieb

Although problems may occur in the implementation of environmental management systems (EMS) in agriculture, an EMS can be a suitable farm management tool. In the past, pilot projects have revealed that the environmental audit as a base analysis still contains methodical weak points. A uniform procedure for the implementation process is not possible due to variations in the structure of farms in Germany with respect to size, employee structure and capital resources. While the resource costs which occur on larger farms can lead to a benefit due to increased efficiency, this has not yet been established for smaller farms. In these cases, other measures such as the implementation of generic management systems (especially environment and quality) or a farm-specific implementation of a management system without the cost-intensive certification may be a possible alternative.     

Teil II: Lösungsansätze für den landwirtschaftlichen Betrieb bei der Implementierung eines Umweltmanagementsystems

The registration of the present situation regarding environmental investigation is the basis for efficiently proceeding in the course of the implementation of environmental management systems (EMS). The basic analysis is found on the individual elements: reaction audit, management audit and compliance audit. Via an optimal performance of an environmental investigation while implementing an EMS, the basis for a maximum utilization has been created for the user as well for agriculture. Utilization for the company is provided by documentation of the organizational structure showing a transparency of procedures with regard to efficiency. Furthermore, an EMS is useful in the course of external tasks, e.g. public approach, business partners, position to authorities, deregulation or minimization of liability.     

Teil I: Das Osnabrücker Umweltmanagement-Modell für Hochschulen

Through their use of energy and materials, universities cause a great deal of environmental pollution which could be reduced considerably by an effective choice of organizational and technical measures. There are some examples for environmental protection measures at several universities, but a professional environmental management system (EMS) for universities with a systematic approach to reduce the consumption of resources is lacking. At the University of Osnabrück, the basis for an EMS applicable for a university has been developed for the first time in Germany and the use of this system can also be transferred to other universities. The EMS is composed of ten building blocks, for example, alteration of the administration’s organizational structure, adoption of environmental guidelines, analysis of the energy and material flows which result in an eco-balance, an environmental program or measures to inform the staff and to help to involve them in environmental management. Over the next months, these ten building blocks will gradually be implemented at the University of Osnabrück. Five articles will provide an overview about the EMS developed for the University of Osnabrück as a whole and will describe parts of the material and energy flow analysis, and the planned environmental information system.

Part I: An Environmental Management Model for Universities: From Environmental Guidelines to the Involvement of Employees

Part II: The Energy Balance of the University of Osnabrück: Analysis of the Energy Flows and Conclusions

Part III: The Traffic Balance of the University of Osnabrück: Calculation of the Environmental Pollution which is caused by the University’s Commuters and Business Trips

Part IV: A Concept of Waste Reduction for the University of Osnabrück: Constructing the Waste Balance and Measures to Inform and Involve the Staff

Part V: The Planned Environmental Information System of the University of Osnabrück: Concept and Integration into the Management Information System

     

建立区域ISO 14001环境管理体系技术要点

以区域为范围进行环境管理体系认证是国家环保总局在我国推行ISO 14000标准的一项重要举措，其目的是将环境管理与行政管理充分有效的结合，借助区域管理机构的管理职能将ISO 14000这一科学的管理手段有效的实施，从而达到环境保护全社会参与，推动该区域各类组织积极自觉地实施ISO 14000标准。本文就区域类型环境管理体系建立与实施的有关技术要点，从经验的角度做了一些探讨。     

Is ISO 14001 a gateway to more advanced voluntary action? The case of green supply chain management

Using Japanese facility-level data, we estimate the effects of ISO 14001 certification on the promotion of more advanced practices, namely green supply chain management (GSCM). Our results show that ISO 14001 promotes GSCM practices. Facilities with environmental management systems (EMS) certified to ISO 14001 are 40% more likely to assess their suppliers' environmental performance and 50% more likely to require that their suppliers undertake specific environmental practices. Further, government programs that encourage voluntary EMS adoption indirectly promote GSCM practices. These programs increase the probabilities that facilities will assess their suppliers' environmental performance and require suppliers to undertake specific environmental practices by 7% and 8%, respectively. Combined, these findings suggest that there may be significant but previously unnoticed spillover effects of ISO 14001 and government promotion of voluntary action.     

春秋季长江口及其邻近海域营养盐污染研究

依据东海环境监测中心两个航次的资料和美国国家海洋大气管理局(NOAA)相关资料,开发Matlab计算机数值分析和图形显示技术,对长江口及其邻近海域的营养盐污染状况进行分析和探讨。结果表明:海域总体营养盐超标严重;氮、磷污染物的来源主要为径流携带入海,磷还受外海流系高质量浓度磷输入的影响;营养盐污染特征显示,表、底层营养盐均自入海口向外围、由近岸向远岸迅速递减,秋季冲淡水将污染物向外海携带,污染区也相应向外海推移;营养盐结构显示,该区w(N)/w(P)比值最高达到了405,无机氮异常丰富,海域浮游植物生长的限制因子存在时空变化。分析得到营养盐污染特征与长江河口锋位置及冲淡水流向的关系密切,可以考虑由长江河口锋位置及冲淡水流向来确定污染物的聚集位置和扩展方向。     

关于国际环境管理标准ISO14000系列

本文简介国际环境管理标准ＩＳＯ１４０００系列的内容，论述了其特点及其在国际贸易、产业结构、公司经营的影响，并提出了我国采用ＩＳＯ１４０００系列应做的工作。     

Development of environmental policy,objectives, and targets

This paper describes a process to develop and establish an environmental policy and its associated environmental targets, objectives, and management programmes. The environmental policy is defined in a statement which addresses the company expectations for programmes that are important to assure adequate environmental protection and define its future commitment towards preventing pollution and continuously improving the effectiveness of its environmental protection programmes. A set of environmental objectives, derived from the policy, define the overall goals which will ensure that the company's environmental performance will remain consistent with the commitment identified in its policy when its environmental management system (EMS) is implemented, Environmental targets reflect the requirements and standards that the company must strive to achieve each objective and minimize any harmful environmental impacts from its production and manufacturing processes or other activities. In addition to defining specific targets, environmental management programmes are also used to guide EMS implementation. These programmes, however, must provide the company with the necessary flexibility to select the most appropriate technologies to enhance its own processes and prudently allocate its available financial resources in areas that return the greatest overall environmental benefit.Though they are expected to allow some discretion in the allocation of resources targeted towards environmental protection, EMS programmes must also provide assurance that the corporation environmental policy, objectives, targets, and management programmes do not result in a facility failure to adhere to all of its certification requirements. The principle and factors described in this article should be considered to the extent that they are necessary and practical.     

The bridge between diversity and adaptivity: Answering McIntosh and Jeffrey

SUMMARY

The emerging concept of industrial ecology (IE) has been applied in practice in few case studies on local/regional industrial recycling networks. Analogously to a natural ecosystem, the aim is to develop material cycles and energy cascades between local cooperative actors. An optimal resource basis of an industrial ecosystem is the sustainable use of local renewable natural resources. In this paper, we consider the region of North Karelia in Finland, with 19 municipalities, and hence somewhat expand the system boundaries of an industrial ecosystem case study. The current situation and two scenarios of municipal heating energy production are presented. The heating system consists of individual, district and electric heating. The heat production and related greenhouse gas emissions are considered. The current fuel use is based on imported oil and regional fuels (peat, wood wastes). Also, shares for co-production of heat and electricity (CHP) are shown. In scenario one, we assume the majority of the fuel basis in oil and absence of CHP. Scenario two illustrates nearly complete dependence on regional wood wastes and firewood with the current share of CHP. The North Karelia region provides the IE theory with a fruitful case study because the supply of waste fuels and local renewables is vast and waste utilisation technologies (CHP, fluidized bed burning) constitute a significant part of energy production. Implications of the applied scenario approach are discussed in the context of regional decision making and, in particular, for its implementation with the concepts of a regional environmental management system (EMS) and a regional industrial ecosystem management system (RIEMS).