An assessment of Mississippi's nonindustrial private forest landowners knowledge of forestry BMP's

This study examined the knowledge levels of Mississippi Non Industrial Private Forest (NIPF) landowners. Data were collected by passing out surveys to participants in Best Management Practices (BMP) educational programs held in conjunction with County Forestry Association (CFA) meetings across Mississippi. Ten CFA's participated in this study. Educational program participants were asked to fill out a survey with several demographic and BMP questions prior to the educational program. Results show that BMP program participants owned an average of 113 hectares, whereas the average Mississippi NIPF landowner owns 20 hectares. Responses to BMP related questions show that Mississippi NIPF landowners have a low level of knowledge concerning BMP's. This situation is likely similar to other states in the Southeastern United States. It can be assumed that county forestry association members are more active and informed about managing their forest land. Therefore, these results may overestimate the BMP knowledge level all landowners in Mississippi.Improved educational programs for NIPF landowners, along with better communication between foresters, loggers, and NIPF landowners are needed if BMP's are to be implemented effectively in Mississippi and across the southern region.     

Best management practices compliance monitoring approaches for forestry in the eastern United States

Many of the eastern states that have published best management practices (BMPs) or forest management guidelines have also developed compliance monitoring programs to assess the application of these BMPs or guidelines on public and private forest land. The approaches among these states to collecting on-site monitoring data (measuring compliance) and evaluating sites are variable. A survey of eastern states found that almost all southern states monitor application of BMPs, but proportionally fewer of the northern states have established compliance monitoring programs. The state forestry agencies provide the leadership for these programs in most of the eastern states. States that monitor tend to evaluate all public and private forest landowner categories located within their states. In general, northern states monitor a broader array of site resources (e.g., cultural resources, visual quality) as compared to southern states which focus on water quality and wetlands protection. However, northern states focus their monitoring on timber harvesting, forest road construction and maintenance as compared to southern states which tend to monitor a broader array of forest management activities (e.g., site preparation, reforestation). When selecting sites for monitoring, the most common approach is to select some sites from all landowner categories within the state. Many states do not specify any criteria to identify sites for monitoring so that all sites have an equal chance for selection. Some states do use specific criteria to filter sites for monitoring, most commonly size of forest management activity and proximity to water.     

人工湿地分散式污水处理系统的设计和运行

采用由预处理单元、水平潜流人工湿地单元、消毒单元和污泥干化单元组成的分散式污水处理系统对采油区生活点污水进行了处理和资源化利用。核心工艺单元水平潜流人工湿地单元的优化设计参数为:人工湿地宽20 m、长80 m,采用多段串联布置形式。分散式污水处理系统实际处理水量为92~136 m3/d,在5年的实际运行过程中,COD,BOD5,NH3-N,SS的平均去除率分别为75.9%,77.3%,96.0%,96.1%。处理后出水经消毒后的水质优于GB/T18920—2002《城市污水再生利用城市杂用水水质》标准中绿化用水的水质,可作为绿化灌溉用水回用;干化后的栅渣和污泥可作为绿化肥料使用,能实现污水的资源化利用和处理系统的零排放。     

Bioassessment of silvicultural impacts in streams and wetlands of the Eastern United States

Bioassessment is a useful tool to determine the impact of logging practices on the biological integrity of streams and wetlands. Measuring biota directly has an intuitive appeal for impact assessment, and biota can be superior indicators to physical or chemical characteristics because they can reflect cumulative impacts over time. Logging can affect stream and wetland biota by increasing sedimentation rates, altering hydrologic, thermal, and chemical regimes, and changing the base of food webs. Biotic impacts of logging on streams compared to wetlands probably differ, and in this paper we review some of those differences. In streams, invertebrates, fishes, amphibians, algae, and macrophytes have been used as indicators of logging impacts. In wetlands, bioassessment is just beginning to be used, and plants and birds are the most promising indicator taxa. Various best management practices (BMPs) have been developed to reduce the impacts of logging on stream and wetland biota, and we review quantitative studies that have evaluated the efficacy of some of these techniques in streams and wetlands in the eastern United States. Remarkably few studies that address the overall efficacy of BMPs in limiting biotic changes in streams and wetlands after BMP implementation have been published in scientific journals, although some work exists in reports or is unpublished. We review these works, and compile conclusions about BMP efficacy for biota from this body of research.     

Conflicting processes in the wetland plant rhizosphere: Metal retention or mobilization?

Increasingly wetlands are used for treatment of metal-contaminated water or as a cover over metal-enriched mine tailings. Natural wetlands may also be contaminated with metals from anthropogenic sources. While wetland conditions tend to be favorable for immobilization of metals, wetland plants could influence metal mobility through redox and pH processes in the rhizosphere. Our current knowledge of these processes is reviewed, focusing on the question of whether the advantages of growing wetland plants in metal-contaminated sediments outweigh the disadvantages. Wetland plants alter the redox conditions, pH and organic matter content of sediments and so affect the chemical speciation and mobility of metals. Metals may be mobilized or immobilized, depending on the actual combination of factors, and it is extremely difficult to predict which effects plants will actually have on metal mobility under a given set of conditions. However, while the effects of plants can extend several tens of centimeters into the sediments, there are no reports suggesting large-scale mobilization of metals by wetland plants.     

Environmental impact and mechanical behavior study of experimental road made with river sediments: recycling of river sediments in road construction

Dredging operations are necessary to maintain harbour activities, to prevent floods, and to restore ecosystem. These sediments after dredging are considered as waste, and their management is a complex problem. In the context of sustainable development, traditional solutions, such as dumping, will be more and more regulated. More than ever with the shortage of aggregates from quarries, dredged sediment could constitute a new granular material source for Civil Engineering domain. The principal objective of this works is to use dredged river sediments in the road construction. This study consists to determine the physical–chemical, geotechnical, and environmental impact characteristics of raw river sediments. To improve the mechanical performance of this river material be used in road construction, a treatment by the hydraulic binder in combination with granular corrector has been proposed. The impacts of the treated material on the environment have been evaluated. The last part of this study focuses on the realization of an experimental road with the designed mixes in the laboratory. The validation of mechanical characteristics and the study of the environmental impacts have been made on core samples from the experimental road. The monitoring of the quality of the percolating water and runoff water has been explored. The obtained results in laboratory and in situ are promising for potential use of river sediments in foundation layer of the road construction.     

Combinations of Horizontal and Vertical Flow Constructed Wetlands to Improve Nitrogen Removal

Nitrogen removal in wetlands is achieved through two pathways: (a) N cycling and (b) storage. N cycling is a permanent removal pathway. There has been an increasing interest in the development of technologies to alleviate permanent nitrogen removal limitation in constructed wetlands by ensuring prevalence of conditions enhancing N cycling. The purpose of this study is to review an emerging technology of vegetated submerged bed constructed wetland system aimed at improving nitrogen removal in wetlands through rational system design. The design and performance of this system type is evaluated. The oxygen transfer capacity and nitrogen removal mechanisms on system performance are evaluated. Constructed wetland combinations most commonly consist of vertical flow (VF) and horizontal flow (HF) beds where VF and HF are aimed at nitrification and denitrification, respectively. Nitrate nitrogen accumulation is the most limiting factor in typical VF based systems.     

Best Management Practices for Silvicultural Chemicals and the Science Behind Them

Silvicultural chemicals include fertilizers and pesticides applied for forest management. All states east of the Rockies have at least some form of silvicultural chemical best management practices (SCBMPs) and it is widely accepted that SCBMPs effect some protection of water quality. All SCBMPs recommend handling and application precautions and a minimum width streamside management zone (SMZ) on each side of streams for protection of water quality and aquatic ecosystems. Typically these zones increase in width as stream width increases. In areas where cold-water fish are present, additional widths are designated for their protection. Minimum SMZ widths range from 8 to 91 meters on each side of the stream bank for intermittent and perennial streams. Most SMZ recommendations do not cover ephemeral drainages, ditches or canals. SMZs are generally described as being site specific with width dependent on slope, soil type and other conditions as well as the stream's designation as perennial or intermittent. The science behind SCBMPs is often elusive. Spray drift can be controlled through proper selection and use of application technology while considering site specific conditions. SMZs greatly reduce the amount of herbicides reaching streams. Available toxicological data and research on aquatic ecosystem impacts from herbicide use suggest that additional protection from silvicultural chemicals may not be necessary. However, there is evidence to suggest that protection of ephemeral and intermittent channels can further reduce entry of silvicultural chemicals into streams and also reduce sedimentation. This may be the most fruitful area of research we can pursue in light of the knowledge gaps listed.     

Recovery of Acidified Streams in Forests Treated by Total Catchment Liming

Reduced emissions of acidifying pollutants have changed the acidification process, and as a result, forest soils and surface waters are slowly recovering in Sweden. However, model calculations show that some areas may never recover completely unless further measures, such as liming, are undertaken. Liming of surface waters (lakes, rivers and wetlands) has been successfully practised in Sweden since the 1970s, but repeated treatments are necessary. A full recovery of acidified lakes and streams without frequent liming is however not possible until soil acidification is reversed in the most strongly affected areas. In this study, the recovery of acidified streams was examined using ‘the total catchment approach’ i.e. treatment of both recharge and discharge areas. The aim was to compare the quantitative effect of different treatments on run off chemistry and the recovery of brown trout. Catchments in southwest Sweden were treated with a combination of 2 tons of wood ash and 4, 6 or 12 tons of crushed limestone per hectare in 1998/1999. Treatment of both recharge and discharge areas resulted in fast and significant changes in stream water quality, e.g. increased concentrations of calcium, higher pH and ANC and a decreased concentration of inorganic aluminium. The initial changes were dependent on the distribution of the applied lime between discharge and recharge areas rather than the average dose on the total catchment. Treatment of recharge areas only, resulted in smaller but still significant effects on calcium, pH and ANC in stream water. Furthermore, there was an initial leaching of nitrate but it was only minor compared with the elevated leaching that occurs after a clear-cut. As a result of the treatments, brown trout is now successfully reproducing. Olle Westling (deceased).     

Effectiveness of forestry streamside management zones in the sand-clay hills of Mississippi: early indications

During the past decade, compliance with initiatives to promote forestry best management practices (BMPs) has been monitored in most states of the southern U.S. and suggests an excellent level of acceptance throughout the region. However, effectiveness of these practices to protect water quality and aquatic habitat in streams that are potentially impacted by forest management activities has not been as thoroughly documented as the degree of compliance. The objective of this study was to determine effectiveness of streamside management zones (SMZs), a key element of BMPs designed for protection of water quality, aquatic habitat, and macroinvertebrate communities, in low-order streams within a region of north central Mississippi that is subjected to intensive forest management. Three SMZ treatments (undisturbed reference, clear-cut logging with an SMZ designated by forest managers, or clear-cut logging with no SMZ) were evaluated using a study with three replications of each treatment. Response metrics including water quality parameters, mineral soil exposure and net deposition/erosion within riparian zones, stream habitat indicators, and aquatic macroinvertebrate communities were comparable between streams receiving SMZs and undisturbed reference streams at all sampling intervals during the first year after treatment. Furthermore, significant elevation of streamwater temperature, decline in habitat stability rating, and increase in density of macroinvertebrates occurring in streams without an SMZ in comparison to reference streams provides additional evidence of SMZ effectiveness during the initial year after harvesting.     

Evaluation of surface water quality impacts of hazardous chemical sites

Common deficiencies in the typical evaluation of the surface water quality impacts of hazardous chemical sites are discussed. Particular attention is given to deficiencies in monitoring stormwater runoff, as well as the input of contaminated groundwaters that lead to impairment of the beneficial uses of nearby surface waters because of site-derived hazardous and deleterious chemicals. An alternative approach, Evaluation Monitoring, is presented in this paper. Evaluation Monitoring shifts the monitoring program from periodic sampling and analysis of stormwater runoff and ambient waters for a suite of chemical parameters, to examining the receiving waters to determine what, if any, water quality use impairments are occurring in surface waters due to the runoff-associated constituents and shallow groundwater input.     

Modelling Change in Ground Vegetation Response to Acid and Nitrogen Pollution, Climate Change and Forest Management at in Sweden 1500–2100 a.d.

The ForSAFE model, designed for modelling biogeochemical cycles (water, acidity, base cation, nitrogen and carbon) in terrestrial ecosystems, was modified with a vegetation response module (VEG), incorporating the effects of: nitrogen pollution, acidification, soil moisture, temperature, wind chill exposure, light and shading by trees, grazing by animals, competition between plants, above ground for light and below ground for water and nutrients. The model calculates the response of number ground vegetation plant groups. The integrated model was tested and validated at integrated level II forest monitoring sites across Sweden, four have been shown here, and used to assess the effect of acidification and nitrogen pollution in relation to factors such as climate change, forest management and changing grazing pressure. The response functions have been derived from single-factor experiments and integrated through the model structure for use on whole systems. The tests with the model suggest that the ground vegetation composition is reasonably well predicted, that much research remains before the model is fully tested and operational, and that the model may serve as a tool for assessing impacts of climate change, acid rain and forest management on plant biodiversity in forested areas.     

Use of life cycle assessment as decision-support tool for water reuse and handling of residues at a Danish industrial laundry.

This analysis presents the results of a life cycle assessment (LCA) carried out on six alternative options for the recycling of water at a Danish industrial laundry for workwear. The study focuses on the handling and disposal of the wet residues generated when wastewater is treated for recycling, and in accounting for long-term potential toxicity impacts. The analysed options are a combination of two water-upgrading technologies: biofilter and ultrafiltration, and three residue disposal alternatives: biogas followed by incineration of sludge at local wastewater treatment plant, thermal vitrification treatment for production of vitrified sand, and mineralization in a sludge bed. It is concluded from the results that with the current Danish environmental policy priorities, the environmental impacts of highest priority are the toxicity effects derived from the presence of heavy metals in the residues. Heavy metals originate from the dirt in the workwear that is washed in the laundry. It is further concluded that the studied water treatment technologies satisfy both the need of clean water for recycling and simultaneously help controlling a safe disposal of pollutants by concentration of the residues. The results of the study also confirm the potential of LCA as a decision-support tool for assisting water recycling initiatives and for residue handling management. The handling of residues has been identified as a stage of the water recycling strategy that bears important environmental impacts. This holistic perspective provided by LCA can be used as input for the definition of environmental management strategies at an industrial laundry, and the prioritization of investments to the environmental profile of laundry processes. In this case-study, the results of the LCA are made operational by, for example, selecting the water treatment technology which is associated wih a safe disposal of the wet residue. It is important to bear in mind that such prioritization depends on national boundary conditions. In the case study analysed, the boundary conditions steer the weighing of the environmental impacts, following the current Danish environmental policy priorities.     

Programs assessing implementation and effectiveness of state forest practice rules and BMPs in the West

The major forest nonpoint source control programs in the West are largely regulatory, either under forest practices acts (California, Idaho, New Mexico, Nevada, Oregon, and Washington) or a streamside management act (Montana). These programs and the specific rules they enforce continue to undergo intensive scrutiny. Still, the questions are the same for these regulatory programs as for states that base nonpoint source control on voluntary BMPs (Arizona, Colorado, Utah, Wyoming). Are the rules or BMPs being applied, and are they effective in reducing nonpoint source pollution to levels that protect beneficial uses of water? The level of debate about forestry in the West has resulted in detailed monitoring and research to answer these questions. In the past, state agencies have assumed levels of BMP compliance based on the percent of operations without enforcement actions. These estimates are being replaced by statistically valid and reproducible monitoring of forest practices rules and BMP compliance levels. BMP effectiveness is being assessed using both qualitative and quantitative methods. This can involve field assessments, process-based research, and control watershed studies. Some trend monitoring is also beginning. With the regional implementation rate for forestry BMPs at about 94% and rising, it is likely that effectiveness testing will continue to be a priority and consume the majority of assessment resources for this region.     

Drivers for innovation in waste-to-energy technology.

This paper summarizes developments made in the field of waste-to-energy technology between the 1980s and the present. In the USA, many waste-to-energy systems were developed in the 1980s and early 1990s. These plants generated power relatively efficiently (typically 23%) in 60 bar/ 443 degrees C boilers. Unfortunately, the development came to a stop when the US Supreme Court rejected the practice of waste flow control in 1994. Consequently, waste was directed to mega-landfills, associated with very negative environmental impacts. However, given landfill taxes and increased fuel prices, new waste-to-energy projects have recently been developed. Attractive premiums for renewable power production from municipal waste have been introduced in several European countries. This triggered important innovations in the field of improved energy recovery. Examples of modern waste-to-energy plants are Brescia and Amsterdam with net efficiencies of 24 and 30%, respectively. Incineration is traditionally preferred in Japan due to space constraints. New legislation promoted ash melting or gasification to obtain improved ash quality. However, these processes reduce the efficiency in terms of energy, cost and availability. A new oxygen-enriched waste-to-energy system is under development in order to better achieve the required inert ash quality.     

Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Forestry best management practices for timber harvesting and site preparation in the eastern United States: An overview of water quality and productivity research during the past 20 years (1982–2002)

Forestry Best Management Practices (BMPs) were developed to protect water quality. In the eastern US, those BMPs were often expanded to include maintenance of site productivity. Generally, BMPs recommend the use of pre-harvest planning and careful design for construction of roads and other activities that expose bare soil, minimizing trafficking and areas of bare soil, maintaining streamside management zones, ensuring rapid revegetation following harvesting, minimizing soil disturbance, and ameliorating severe trafficking with site preparation. This review of peer-reviewed research from the past 20 years examined the effects of forest harvesting and site preparation on water quality and site productivity in the eastern US. The review was subdivided into areas having relatively similar physiography and land management (New England, Lake States, Appalachian Plateau, Ridge and Valley, Blue Ridge, Piedmont, Atlantic Coastal Plain, Gulf Coastal Plain, and Ouachitas-Ozarks). In general, data from steeper physiographic regions indicated that forest harvesting and site preparation can increase erosion, sediment and nutrient losses to streams. However, the quantities introduced into streams tended to be relatively low, generally below the values that are considered acceptable for alternative land uses. Also most research indicated that water quality recovers within two to five years following forest operation disturbances, particularly if BMPs are employed. Research from the less mountainous and often more poorly drained Lake States and Coastal Plain regions indicated that soil compaction and rutting may or may not cause site productivity effects, depending on soil types, natural ameliorative properties and site preparation. Overall, the research supports the forestry BMPs recommended in the eastern states.     

Modeling microbiological and chemical processes in municipal solid waste bioreactor,part I: Development of a three-phase numerical model BIOKEMOD-3P

The numerical computer models that simulate municipal solid waste (MSW) bioreactor landfills have mainly two components – a biodegradation process module and a multi-phase flow module. The biodegradation model describes the chemical and microbiological processes. The models available to date include predefined solid waste biodegradation reactions and participating species. Some of these models allow changing the basic composition of solid waste. In a bioreactor landfill several processes like anaerobic and aerobic solids biodegradation, nitrogen and sulfate related processes, precipitation and dissolution of metals, and adsorption and gasification of various anthropogenic organic compounds occur simultaneously. These processes may involve reactions of several species and the available biochemical models for solid waste biodegradation do not provide users with the flexibility to simulate these processes by choice. This paper presents the development of a generalized biochemical process model BIOKEMOD-3P which can accommodate a large number of species and process reactions. This model is able to simulate bioreactor landfill operation in a completely mixed condition, when coupled with a multi-phase model it will be able to simulate a full-scale bioreactor landfill. This generalized biochemical model can simulate laboratory and pilot-scale operations in order to determine biochemical parameters important for simulation of full-scale operations.     

Treatment of sludge containing nitro-aromatic compounds in reed-bed mesocosms - Water, BOD, carbon and nutrient removal

Since the mid-1970s, Sweden has been depositing 1 million ton d.w sludge/year, produced at waste water treatment plants. Due to recent legislation this practice is no longer a viable method of waste management. It is necessary to improve existing and develop new sludge management techniques and one promising alternative is the dewatering and treatment of sludge in constructed wetlands. The aim of this study was to follow reduction of organic carbon, BOD and nutrients in an industrial sludge containing nitro-aromatic compounds passing through constructed small-scale wetlands, and to investigate any toxic effect such as growth inhibition of the common reed Phragmites australis. The result showed high reduction of all tested parameters in all the outgoing water samples, which shows that constructed wetlands are suitable for carbon and nutrient removal. The results also showed that P. australis is tolerant to xenobiotics and did not appear to be affected by the toxic compounds in the sludge. The sludge residual on the top of the beds contained low levels of organic carbon and is considered non-organic and could therefore be landfilled. Using this type of secondary treatment method, the amount of sludge could be reduced by 50-70%, mainly by dewatering and biodegradation of organic compounds.     

Material flow analysis of RDF-production processes

The authors evaluate the possibilities of modifying the chemical characteristics of refuse-derived fuels (RDF) that are processed from residual household waste by mechanical operations to achieve and assure quality targets for relevant chemical concentrations, especially for heavy metals and chlorine. Quality assurance in the production of RDF demands that, together with an enrichment of the calorific value, highly toxic waste components are selectively separated and concentrated in a small stream to produce high yields of a relatively low polluted fuel. Based on the method of material flow analysis, a process evaluation is developed that considers the aspect of minimizing hazardous chemicals along with classical process data such as yield and product quality. Data on specific concentration of hazardous chemicals in waste components and their distribution in residual household waste as well as the results from large-scale test runs using different separation techniques demonstrate that mechanical operations alone are insufficient for separating hazardous chemicals. In the test runs, chemical compounds such as chlorine, cadmium and lead were often concentrated in the product. Even using optimized techniques, the ability to reduce hazards in the product is limited due to the distribution of the element concentration in the various components of the waste stream.