Respiratory Problems of Workers in the Zarda Industry in Kolkata,India

This study was undertaken to assess the pulmonary and respiratory problems of workers in a zarda factory. A total of 70 permanent zarda workers (50 manufacturing workers and 20 office ones) were studied in a factory in Baguihati, Kolkata, India. The study included (a) completion of a questionnaire (on pulmonary and respiratory problems), (b) measurement of physical parameters, (c) spirometry and (d) measurement of peak expiratory flow rate. At the same time, the worksite was analyzed with an OSHA-recommended ergonomics checklist. Many zarda manufacturing workers complained of respiratory symptoms. Continuous exposure to the tobacco processing environment reduced the workers’ lung volume and peak expiratory flow rates. Our study indicates that zarda manufacturing workers may have respiratory and pulmonary disorders related to exposure to tobacco dust in their work environment.     

Respiratory problems of workers in the zarda industry in Kolkata, India.

This study was undertaken to assess the pulmonary and respiratory problems of workers in a zarda factory. A total of 70 permanent zarda workers (50 manufacturing workers and 20 office ones) were studied in a factory in Baguihati, Kolkata, India. The study included (a) completion of a questionnaire (on pulmonary and respiratory problems), (b) measurement of physical parameters, (c) spirometry and (d) measurement of peak expiratory flow rate. At the same time, the worksite was analyzed with an OSHA-recommended ergonomics checklist. Many zarda manufacturing workers complained of respiratory symptoms. Continuous exposure to the tobacco processing environment reduced the workers' lung volume and peak expiratory flow rates. Our study indicates that zarda manufacturing workers may have respiratory and pulmonary disorders related to exposure to tobacco dust in their work environment.     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

某飞机维修公司个人听力防护用品使用情况调查分析

为了解听力防护用品使用过程中的问题,提高我国噪声暴露工人听力防护用品的使用率和有效率,选择噪声危害较大的某飞机维修公司的员工,进行听力防护用品使用情况的问卷调查。结果显示:该公司为员工提供耳塞和耳罩两种听力防护用品;员工的听力保护意识、使用情况较好,使用率达95%,但对听力防护用品相关知识的了解不够全面;能够在工作中一直坚持使用的工人较少,仅占11%,影响工人工作时间使用听力防护用品时间长短的因素主要是其舒适性。调查分析提示:在未来听力防护用品的生产过程中,需要进一步加强和改善舒适性的技术;政府、企业和个人3方面共同参与,降低职业性噪声暴露对工人听力的损伤。     

钨钴硬质合金职业接触者血清KL-6水平的分析

为了探讨硬质合金职业接触及相关因素对劳动者血清KL-6水平的影响,选取硬质合金接触组407名劳动者,非硬质合金作业的对照组297名劳动者,对所有研究对象进行基本信息问卷调查,检测各岗位钨、钴浓度,竞争法酶联免疫吸附实验检测研究对象血清KL-6水平。结果表明:接触硬质合金粉尘可增加外周血清KL-6水平;钴可能是硬质合金粉尘致肺损伤的主要危害因素;年龄、吸烟对血清KL-6水平无显著影响;饮酒可增加硬质合金粉尘接触者KL-6水平。     

Respiratory Impairment in Cotton-Ginning Workers Exposed to Cotton Dust

Dust generated during the handling and processing of cotton causes ill health of ginning workers. The purpose of this study was to determine the prevalence of respiratory symptoms among cotton-ginning workers. This study involved 188 workers of 10 cotton-ginning factories. Forced vital capacity (FVC), peak expiratory flow rate (PEFR), and forced expiratory volume in 1 s (FEV1) declined significantly with increasing duration of exposure (p < .001) of the cotton-ginning workers. Results of a standard respirator medical evaluation questionnaire indicated that, depending on duration of exposure, 51%–71% of cotton-ginning workers suffered from chest tightness, 55%–62% experienced chest pain, while 33%–42% of the workers reported frequent cough. Blood tests of the workers showed higher values of erythrocyte sedimentation rate, eosinophils, and white blood cells when exposure was longer. Byssinosis symptoms were observed among the workers. We recommend regular periodical medical check-ups, compulsory use of personal protective equipment, and proper ventilation at the workplace.     

Effects of Neutral Posture on Muscle Tension During Computer Use

This study focused on developing a new approach to seated work positions as conducted on 67 office workers who use a Visual Display Terminal (VDT) as a major function of their working day. Muscle tension was measured by surface electromyography (sEMG) while participants were asked to adopt 4 selected working postures. Pain was measured before and after ergonomic intervention on the Nordic scale, which was modified for this study. Adjustable workstations were used to place participants in desired positions during the clinical testing sessions and the extended intervention period. Results indicate the effects of this ergonomic intervention may have positive effects on muscle tension and pain, significant enough to encourage employers to implement training and workstation modifications following these guidelines.     

Model for predicting peak expiratory flow rate of Nigerian workers in a cement factory in Itori,Ogun State,Nigeria

The main aim of the study was to propose a model for predicting the peak expiratory flow rate (PEFR) of Nigerian workers in a cement factory. Sixty randomly selected non-smoker and healthy workers (30 in production sections, 30 in the administrative section of the factory) participated in the study. Their physical characteristics and PEFR were measured. Multiple correlations using SPSS version 16.0 were performed on the data. The values of PEFR, using the obtained model, were compared with the measured values using a two-tailed t test. There were positive correlations among age, height and PEFR. A prediction equation for PEFR based on age, height, weight and years of exposure (experience) was obtained with R²?=?.843 (p?<?0.001). The developed model will be useful for the management in determining PEFR of workers in the cement industry for possible medical attention.     

Noise exposure as related to productivity, disciplinary actions, absenteeism, and accidents among textile workers

A sample of 2458 workers exposed to average noise levels ranging from 80 to 99 dBA in different operations of three textile mills was studied with respect to their productivity, work rule violations, absenteeism, and accidents. The three mills were in rural, suburban, and urban locations. Noise exposure levels were measured in individual departments of the mills, and workers were interviewed to ascertain socioeconomic background, work history data, and health status. Workers' job attitude was rated by their supervisors, and data about their productivity, disciplinary reports, absenteeism, and accidents were collected from plant records. Results of the study suggested that workers in departments with high noise levels (above 90 dBA) had more disciplinary actions and absenteeism and lesser productivity than those in departments with low noise exposure (below 90 dBA). Disciplinary actions showed the greatest difference between the high-noise and low-noise departments followed by production incentives, production efficiency, and absenteeism. Noise appeared to affect the quality of work as reflected by disciplinary actions for material damage, and this effect was higher in weaving and spinning operations which involved vigilance tasks. The frequency and severity rates of accidents in highnoise departments were greater than in low-noise departments. Certain personal and socioeconomic factors affected high vs. low noise exposure differences found among workers for the investigated variables. These effects were most apparent for absenteeism and, to a lesser extent, productivity. Disciplinary actions did not appear to be influenced by any such individual factors. It was concluded that noise abatement in the textile industry could be beneficial to worker productivity and well being and contribute to more economically effective operation.     

Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review

IntroductionMore than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. Method: A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. Results: The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. Discussion: Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. Conclusions: Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications: The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures.     

A methodology for assessment of long-term exposure to whole-body vibrations in vehicle drivers to propose preventive safety measures

Introduction: The appearance of musculoskeletal disorders (MDs) in professional drivers due to exposition to whole-body vibration (WBV) makes it relevant to assess this exposure. The European Directive 2002/44/EC has two methods to evaluate exposure to WBV (defined in ISO2631-1:2008). These methods evaluate the exposure associated with an 8-hour working day; however, MDs due to WBV could also be caused by accumulated exposure to vibrations over long term, and hence, the methods defined in the European directive may be limited in their ability to ensure the safety of workers exposed to WBV throughout their years of employment. Method: A detailed comparison and discussion of methods defined in the European Directive and the ISO2631-5:2018 was used as a starting point of the main results of this paper. On this basis, a new methodology for the management and organization of preventive measures is proposed to consider the assessment of ISO2631-5:2018 standard and the full working life of workers. Experimental data to assess exposure to WBV in heavy equipment vehicle (HEV) drivers under different road surface conditions and range of velocities were considered to illustrate the process of the proposed methodology. Results: The methods defined in the standards provide different assessments leading to a different possible consideration of safe operations when the risks associated with them may actually be high. The proposed methodology can be used with the aim of ensuring safety of workers throughout their working lives and providing an easy implementation of the calculations of ISO2631-5:2018 standard. Conclusions: A procedure to assess the health risk probability to which the HEV worker is exposed in terms of the exposure years and a different range of operational vehicle speeds is proposed and exemplified with a study case. Practical applications: This study provides a practical tool for the management of WBV exposure related to work-tasks in HEV drivers. Safety managers should consider the global exposition to WBV throughout their working life, and this research provides an easy tool to accomplish it.     

An ergonomic study on posture-related discomfort among preadolescent agricultural workers of West Bengal, India.

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

An Ergonomie Study on Posture-Related Discomfort Among Preadolescent Agricultural Workers of West Bengal,India

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

The influence of a real job on upper limb performance in motor skill tests: which abilities are transferred?

To investigate whether the specificities of real jobs create distinctions in the performance of workers in different motor tests for the upper limbs, 24 participants were divided into two groups according to their specific job: fine and repetitive tasks and general tasks. Both groups reproduced tasks related to aiming movements, handling and strength of the upper limbs. There were no significant differences between groups in the dexterity and performance of aiming movements. However, the general tasks group had higher grip strength than the repetitive tasks group, demonstrating differences according to job specificity. The results suggest that a particular motor skill in a specific job cannot improve performance in other tasks with the same motor requirements. The transfer of the fine and gross motor skills from previous experience in a job-specific task is the basis for allocating training and guidance to workers.     

Structural equation modelling of lower back pain due to whole-body vibration exposure in the construction industry

Whole-body vibration (WBV) exposure is a health hazard among workers, causing lower back pain (LBP) in the construction industry. This study examines key factors affecting LBP due to WBV exposure using exploratory factor analysis and structural equation modelling. The results confirm five key factors (equipment, job related, organizational, personal, social context) with their 17 associated items. The organizational factor is found the most important, as it influences the other four factors. The results also show that appropriate seat type, specific training programme, job rotation, workers’ satisfaction and workers’ physical condition are crucial in reducing LBP due to WBV exposure. Moreover, provision of new machines without proper training and good working condition might not help reduce LBP due to WBV exposure. The results help the construction companies to better understand key factors affecting LBP due to WBV exposure, and to plan for a better health improvement programme.     

Gender response and safe carrying load limit for sugar industry workers

This study investigates the safe carrying load limit in relation to gender of workers in the sugar industry. A total of 632 workers (male and female) were interviewed following a physiological and psycho-physiological methodology. All of these workers were in the age groups of 21–30, 31–40 and ≥41 years. In this study, for the physiological methodology, both field and laboratory data were collected, which included heart rate, heart rate variability, energy expenditure and maximum rate of oxygen consumption. Information regarding hemoglobin content, weight, age, lean body weight, etc., was recorded to know the physical health of the workers. In the psycho-physiological evaluation, load-carrying limits were determined by the psychophysical rating of the load by workers from the selected age groups. By considering the physiological stresses and psycho-physiological evaluation, the safe carrying load limit was determined in head and back mode for male and female workers as per their age groups.     

Dimensions of Job Control in Computerized and Traditional Office Work and Its Health Effects

This study investigates whether a consistent relationship exists between computerization and job control. It also examines the role of job control as a predictor of stress symptoms typical for data entry and word processing (VDU) work. Two groups of VDU users and two comparable non-VDU-user groups took part in this study. A special questionnaire made it possible to assess global job control and four indexes of control related to specific aspects of work (control over choice of tasks and methods, control over time frame, control related to one’s skill, and control related to participation in the decision-making process). Results did not show an unequivocal relation between computerization and the latitude of control. The latitude of control depends on the task performed and the aspect of control we are considering. Regression analyses showed that global control is a good predictor of job satisfaction, some mood disturbances, and visual complaints. The other aspects of control are related in a variety of ways to stress symptoms. The role of a Type A behavior pattern in the relationship between job control and stress symptoms varies depending on which aspect of control is being considered. It was concluded that because of the high functional differences between various aspects of control, it is better to avoid using the concept of global control and, when possible, apply specific indexes of control.     

Self-assessment of hearing status and risk of noise-induced hearing loss in workers in a rolling stock plant

Noise measurements and questionnaire inquiries were carried out for 124 workers of a rolling stock plant to develop a hearing conservation program. On the basis of that data, the risk of noise-induced hearing loss (NIHL) was evaluated. Additionally, the workers' hearing ability was assessed with the (modified) Amsterdam inventory for auditory disability and handicap, (m)AIADH. The workers had been exposed to noise at A-weighted daily noise exposure levels of 74-110 dB for 1-40 years. Almost one third of the workers complained of hearing impairment and the (m)AIADH results showed some hearing difficulties in over half of them. The estimated risk of hearing loss over 25 dB in the frequency range of 3-6 kHz was 41-50% when the standard method of predicting NIHL specified in Standard No. ISO 1999:1990 was used. This risk increased to 50-67% when noise impulsiveness, coexposure to organic solvents, elevated blood pressure and smoking were included in calculations.     

Health and Safety Perception of Workers in Turkey: A Survey of Construction Sites

This study reports the general health and safety (HS) conditions in the Turkish construction industry from the perspective of construction labor. Toward this aim, a questionnaire survey was carried out with 800 workers employed in 32 construction projects in Turkey. Contractors were found to neglect their legal liabilities in paying workers’ insurance premiums. Also, they overlooked safety training and were reluctant to hiring physicians at construction sites and investing in personal protective equipment (PPE). As the real constructors of projects, workers did not attach adequate importance to occupational training. In addition, they were not willing to use some PPE. Key participants of HS affairs such as workers, contractors, unions, and government should comprehend their drawbacks to overcome the current dangerous view of the industry. In this regard, related government bodies should compel contractors and workers to adapt to the relatively new regulations on occupational HS.