欧洲有关国家关于执行欧盟废旧电子电气指令的措施

随着全球高科技工业的迅猛发展、人类消费水平的不断提高和消费结构的变化，电子废弃物快速增长，并造成日益严重的环境污染问题，因此引起了全球各国高度关注并制定了相关环境管理对策。2003年2月13日，欧盟公布了《废旧电子电气设备指令》（简称WEEE指令）和《限制某些有害物质在电子电气设备中使用指令》（简称ROHs指令）。欧盟各国实践表明，欧盟成员在欧盟指令公布之前已经制定了关于收集和适当处理电子电气废物的规定，这些规定基本上与欧盟新指令有着相同的内涵。因此，欧盟成员政府并不需要为了满足欧盟指令的新要求而对目前国内的电子电气处理体制做太大的修改，故可以预期欧盟各国执行欧盟关于废旧电子电气设备指令过程中将不会导致过多问题产生，并且执行成本相对较小。     

Geophysical methods in radon risk studies

The results of the studies presented in the paper have shown that in the Upper Silesian Region in Poland, radon indoor concentration levels depend first of all on the geological structure of the subsurface layers. The essential factors influencing radon migration ability are the mining-induced transformations of a rock mass. In some cases, significant variations of radon potential have been found at sites featuring similar geological structures and experiencing comparable mining effects. To find out the causes of these variations, studies involving geophysical methods such as electrical resistivity profiling (PE) and electrical resisitivity sounding (VES) were used. These studies have shown that the measurements made using the electrical resistivity method can be helpful in evaluating radon potential of both the tectonically disturbed areas and the mining-transformed ones.     

公用事业民营化及其环境行为政府管制的研究

公用事业民营化的目的是在公用事业行业引入民间资本和市场竞争模式,提高公共产品服务的产出质量和效率。以电力行业的民营化为例,电力市场对于民营企业的开放能够在很大程度上提高我国电力生产水平．解决当前电力供求关系紧张的问题。但是,大量民营企业介入电力生产,由于其技术落后而导致的资源浪费以及污染物的无序排放给我国的环境保护带来了新的困扰。我们应该在科学发展观和构建社会主义和谐社会的目标指引下,加强政府对于电力企业等公用事业民营化企业生产经营活动的法律管制,同时加强和完善相关的环境立法,达到公用事业积极发展和环境保护目标实现的双赢目标。     

Theoretical methods for computing electrical conditions in wire-plate electrostatic precipitators

A new semi-empirical, approximate theory for predicting electrical conditions is described. In the approximate theory, analytical expressions are derived for calculating voltage-current characteristics and electric potential, electric field, and space charge density distributions. Comparisons of numerical and approximate solutions over a wide range of possible precipitator geometries and electrical operating points indicates that for practical purposes the approximate theory can be used in lieu of the more rigorous numerical theory. This saves large amounts of computer time and makes possible hand calculator usage. Recent in situ gaseous ion mobility data which are needed in the models are presented. For coal fired power plants, the reduced effective ion mobility in positive corona is found to be 1.6 times that for negative corona. Approaches for describing particulate space charge effects in the gas and electrical conditions in the collected particulate layer are briefly discussed.     

国外废旧家用电子电器回收再利用研究

随着废旧家用电子电器数量和种类的增加及其产生的环境污染问题，废旧家用电子电器的处理处置、回收再利用引起世界各国的广泛关注。本文阐述了一些工业发达国家在废旧家用电子电器回收再利用方面所采取的措施、取得的成功经验和未来发展趋势。     

Synergico: a method for systematic integration of energy efficiency into the design process of electr(on)ic equipment

This paper presents an overall design method to better consider the energy consumption of electrical and electronic equipment during the use phase. This aspect is often considered as the most important environmental aspect in active electrical and electronic equipment during its life cycle. The proposed method, called ‘Synergico’, characterises the product energy efficiency according to its modes, its functions and its sub-assemblies. It also articulates three tools: one assessment tool, one improvement tool and one environmental check tool. These tools are integrated along a typical product design process. The method therefore helps designing more energy-efficient products without compromising other performances such as ergonomics, functional performances, security, recyclability or costs. The three tools and the overall method are presented. A case study illustrates the way it works and is discussed.     

Optimum design and evaluation of hybrid solar/wind/diesel power system for Masirah Island

This paper addresses the requirements of electrical energy for an isolated island of Masirah in Oman. The paper studied the possibility of using sources of renewable energy in combination with current diesel power plant on the island to meet the electrical load demand. There are two renewable energy sources used in this study, solar and wind energy. This study aimed to design and evaluate hybrid solar/wind/diesel/battery system in terms of cost and pollution. By using HOMER software, many simulation analyses have been proposed to find and optimize different technologies that contain wind turbine, solar photovoltaic, and diesel in combination with storage batteries for electrical generation. Four different hybrid power systems were proposed, diesel generators only, wind/diesel/battery, PV/diesel/battery, and PV/wind/diesel/battery. The analysis of the results shows that around 75 % could reduce the cost of energy by using PV/wind/diesel hybrid power system. Also, the greenhouse emission could be reduced by around 25 % compared with these by using diesel generators system that currently utilize in the Masirah Island. The solar/wind/diesel hybrid system is techno-economically viable for Masirah Island.     

Electrical augmentation of granular bed filters

A study of the enhancement of the collection efficiency of granular bed filters by electrical means is reported. By applying electric fields of a few kV/cm (DC or AC) across a bed of insulating granules, the efficiency for submicron charged aerosol is greatly increased, to the point where the efficiency minimum normally observed with such filters in the size range 0.1–1 μm is removed. The performance of such filters is explored as a function of granule size, applied field, face velocity and charge state of the entering aerosol with both a bench-scale flow system (to 40 ft³/min; 1.1 m³/min) and a wind tunnel (to 600 ft³/min; 17 m³/min). Some theoretical estimates are made to identify the most likely physical mechanism of electrical enhancement, and a number of potential application possibilities are discussed.     

RETRACTED ARTICLE: Perspectives for the long-term penetration of new renewables in complex energy systems: the Italian scenario

Renewable energy sources are mainly used in the electrical sector. Electricity is not a storable commodity. Hence, it is necessary to produce the requested quantity and distribute it through the system in such a way as to ensure that electricity supply and demand are always evenly balanced. This constraint is actually the main problem related to the penetration of new renewables (wind and photovoltaic power) in the context of complex energy systems. The paper analyzes some aspects in connection with the problem of new renewable energy penetration. The case of Italian scenario is considered as a meaningful reference due to the characteristic size and the complexity of the same. The various energy scenarios are evaluated with the aid of a multipurpose software taking into account the interconnections between the different energetic uses. In particular, it is shown how the penetration of new renewable energies is limited at an upper level by technological considerations and it will be more sustainable if an integration of the various energy use (thermal, mobility and electrical) field will be considered.     

Radiocaesium in flowing waters of highly contaminated Austrian alpine areas

In this study the runoff of (137)Cs, mainly originated from the Chernobyl fallout, from highly contaminated alpine regions in Salzburg (Austria) is discussed. Twenty-five water-samples and 25 sediment-samples were taken from creeks of different size to determine the runoff of dissolved (137)Cs and Cs-binding characteristics to different particle size classes in the sediments. The hypothesis, that specific activity of the sediments depended on particle size and the surface of the particle, was proved with some modifications. Caesium activity concentration in water showed a negative correlation with electrical conductivity, while no significant correlations were detectable with other variables (pH, temperature, and altitude). Enormous differences and the variations found in the (137)Cs-concentrations in water can be explained by the electrical conductivity without any dependency on the inventory of the catchment. The sediment samples analysed showed a negative correlation between specific activity [Bq/kg] and particle-diameter, mainly explained by (137)Cs-uptake proportional to the particle surface per mass.     

政府管制下处理商选择拆解方式的演化博弈研究

废旧电器电子产品的非生态拆解引发的环境问题日益突出,该问题的根本原因在于单纯市场机制下多数处理商会选择非生态拆解方式,政府规制介入成为必然。本文运用演化博弈方法探讨政府管制在处理商拆解方式选择过程中的角色。本文首先分析了政府不管制下和政府管制下处理商选择拆解方式博弈关系;然后运用演化博弈理论建立了政府管制下处理商选择拆解方式的演化博弈模型,并分析了模型中一些主要参数对处理商选择拆解方式的影响;最后通过数值仿真了不同参数下处理商选择拆解方式的演化过程。得到结论:政府需要对废旧电子产品的拆解工作进行监督和管制;政府的管制力度和处理商拆解方式选择比例的初始值均会对最终演化结果产生影响。研究表明:政府对处理商选择生态拆解方式的激励效应及对选择非生态拆解方式的管制效应对处理商选择拆解方式的行为演化结果起着至关重要的作用,政府通过制定合适的管制政策可以有效推动废旧电子电器产品处理商选择生态拆解方式。     

Spatio-temporal modelling of electric vehicle charging demand and impacts on peak household electrical load

This paper presents a composite methodology for obtaining spatial and temporal projections of charging demand and peak-shaving potential from plug-in electric vehicles (EVs), and the associated spatio-temporal impacts on peak household electrical load. The methodology comprises a suite of models of future EV uptake, travel by households, household electricity demand and recharge/discharge of EVs at their home locations. The analysis is disaggregated to hourly time-steps over a full year, and spatially to mesh blocks comprising around 250 houses per block. The modelling suite is applied to an analysis of peak household load impacts across the state of Victoria, Australia, under nine different combinations of EV uptake and charging/discharging behaviour. The projected increase in peak household electrical loads under expected penetration rates and charging demands is less than 10 % on most high-demand days, but can be up to 15 % on a handful of days and geographic locations. Peak-load impacts under off-peak charging are mostly less than 5 %. With judicious EV discharging strategies, there is potential to shave peak loads on the highest demand days by up to 5 %.     

Simulation and analysis of a combined cycle heat and power plant process

The regulations of process efficiency and stricter environmental policies require analysis of large-scale thermal energy systems to produce highly efficient, cost effective and low environmental impact energy. For analysis, it is beneficial to simulate an energy system. In this paper, simulation models are developed for the analysis of a combined cycle heat and power plant located in Göteborg, Sweden. With the help of simulation models, characteristics between district heating (DH) water temperature and key parameters such as overall district heat duty, electrical power and electrical efficiency has been developed. The characteristics are useful to estimate and maximize the key parameters during varying DH water temperature. According to a comparison between the full-load simulation models of 2006 and 2013 for the selected power plant, a loss of 2 MW is noticed for gas turbine and a loss of 2.18 MW of heat flow occurs for heat recovery steam generator in the year 2013. The feasibility analysis of modifying the connection between DH economizer and main DH line provides good performance indicators in a winter scenario. The conclusions in this paper are good references to plan and improve the performance of existing large-scale thermal power plants.     

Climate change impacts,vulnerability and adaptive capacity of the electrical energy sector in Cyprus

The purpose of this study was to investigate the climate change impacts, vulnerability and adaptive capacity of the electrical energy sector in Cyprus. Spatial vulnerability of the island was assessed using the degree-day indicator to investigate heating and cooling demands in the near future using daily temperature projections from regional climate models (RCMs). Using daily electrical energy consumption data for the present climate, an impact model linking consumption and temperature was constructed and this relationship was projected to the future climate using the data from the RCMs and assuming the same technology use. Our impact model results showed that for the period between November and April (‘cold period’), a decreasing trend in electrical energy consumption is evident due to warmer conditions in the near future, while for the period between May and October (‘warm period’), an increasing trend in electricity consumption is evident as warmer conditions dominate by 2050. Regarding the spatial vulnerability assessment, the cooling degree-day indicator testified that major increases in cooling demand, between 100 and 200 degree-days, are expected in inland and southern regions during the summer in the near future. In addition, increases of about 20–50 degree-days are anticipated during autumn. Conversely, energy demand for heating is projected to decrease during spring and winter, especially in the higher elevation parts of the island. More precisely, reductions of about 30–75 degree-days are projected during spring, while greater reductions of about 60–90 degree-days are expected during winter in heating demand, especially for in the near future. The ability of the energy sector to adapt and follow these changes was deemed to be satisfactory reducing the overall vulnerability of the sector to future climate change.     

Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products

Alternative production approaches are required because of conventional manufacturing's adverse environmental impacts. Remanufacturing returns used products to at least original performance specification from customers' perspectives and gives the resultant products warranties at least equal to that of new equivalents. Remanufacturing is relatively novel in research terms compared to conventional manufacture and recycling but often is more profitable than both. It would help manufacturers address competitive, environmental and legislative pressures by enabling them to meet pressing waste legislation while producing high-quality, lower cost products with less environmentally damaging end-of-life (EoL) and manufacturing modes. Remanufacturing is highly profitable in large, complex mechanical and electromechanical products but with conventional manufacturing and design modes not so in smaller products; particularly fast moving ones. However, effective waste management is urgently required for such products because waste electrical and electronic equipment constitutes the fastest growing EU waste stream and a large percentage of products being produced by major developing economies such as China are of this type. Active disassembly (AD) enables product non-destructive, self-disassembly at EoL and was invented to facilitate a step-change improvement in recycling. This research investigated the use of AD to extend profitable remanufacturing into small EoL electrical and electronic products.     

Experimental studies in the electrostatic precipitation of high-resistivity particulate

A pulsed charging system is described that eliminates reverse ionization inelectrostatic precipitation. The motivating concept is a purely electrical approach. The fundamental characteristic of this method is the relaxation time of the precipitated particulate. Laboratory studies indicate that this powering concept could increase precipitator performance on high-resistivity particulate by more than two orders of magnitude. Pilot results are also presented.     

Performance evaluation of solar photovoltaic electricity-generating systems: an Indian perspective

The present work seeks to assess the sustainability of different solar photovoltaic (SPV) electricity-generating systems based upon energy, environment and economics. The sustainability indicators evaluated for energy, environment and economics are electrical output, life-cycle greenhouse gas (GHG) emissions and life-cycle cost of electricity generated per kilowatt hour. The selected SPV-based electricity generation technologies for sustainability evaluation are amorphous, monocrystalline and polycrystalline at different locations and tilt angles across India. For SPV systems, most of the emissions are the result of electricity use during manufacturing. In these cases, an average grid mix for the region of manufacture is typically used to calculate energy use and emissions. Based upon these three indicators, a figure of merit (FM) has been proposed. The results proposed that polycrystalline gives the maximum electrical output, minimum GHG emission, minimum cost and maximum FM at a radiation level of 6 kWh/m²/day with latitude and tilt angle of 34° and 35°, respectively. This work will be helpful to users of solar energy, academicians, researchers and other concerned persons, in understanding the importance, severity and benefits obtained by the application and implementation of the SPV electricity-generating systems.     

Dynamic simulation of a decentralized polygeneration plant providing SNG,steam and power

The behaviour of a decentralized polygeneration plant providing synthetic natural gas (SNG), steam and electrical power is simulated in three scenarios in this study. The plant size is based on an assumed capacity of decentralized polygeneration plants processing 1070 m³ h^?1 (STP) of syngas. 396 m³ h^?1 (STP) of raw SNG, 0.4 t h^?1 of steam at 5 bar and 670 kW of electrical power can be generated by the plant at the reference scenario. Methanation reactor and steam generator are modelled in detail. Further results indicate that such a polygeneration plant can provide positive and negative operation reserves for the electricity network to the extent of 100% of the reference power output, while the amount of generated steam varies by less than 40%. At the same time, the generated SNG quality keeps constant. Lower variations in the amount of generated steam are applicable when reducing the operation reserve capacity.     

Transfer of Sr into fish in Finnish lakes

The long-term behavior of ⁹⁰Sr was investigated from 1987 to 1997 in fifteen lakes in southern and central Finland following the 1986 Chernobyl accident. Both water and fish samples (perch, pike, vendace) were analyzed. ⁹⁰Sr stays long in the freshwater ecosystem; the observed half-lives during the study period were generally around 10 years in water and even longer in fish. One lake exhibited very different behavior for ⁹⁰Sr, with elevated levels in fish and water and very short observed half-life in fish, less than 2 years. Concentration factors of ⁹⁰Sr in fish (Bqkg⁻¹ f.w. in fish/Bqkg⁻¹ in water) among the studied lakes significantly correlated with both the Ca concentration and electrical conductivity of the water. More ⁹⁰Sr was transferred into fish in lakes with a low electrical conductivity and a low Ca concentration. Among other water parameters evaluated were pH, color, total nitrogen, and phosphorus.     

Ecological and economical assessment of end‐of‐life waste recycling in the electrical and electronic recovery sector

Technological innovation and shorter product life cycles of electrical and electronic equipment coupled with their rapidly growing applications have resulted in the generation of an enormous amount of waste from electrical and electronic equipment (WEEE). To address the potential environmental problems that could stem from improper end‐of‐life management of WEEE, many countries have drafted national legislation to improve the reuse, remanufacture and material recycling from WEEE, and to reduce the amount of such waste going to landfills. With the introduction of such legislation comes an increased need for the recovery operators to evaluate the recycling costs and environmental benefits of reclaimed products and materials in order to select the most appropriate end‐of‐life options for individual products in WEEE. This paper presents a systematic methodology for ecological and economical assessment to provide a holistic understanding of the impacts associated with different end‐of‐life options for such waste. This assessment, in addition to providing decision‐support for the selection of the best possible end‐of‐life option for a particular product in WEEE, could also generate vital information to support the design and material selection processes during the initial product development activities. The assertion made is that the detailed considerations of the ecological and economical impacts associated with different end‐of‐life options will significantly improve the recovery and recycling of WEEE.