Integrated exposure monitoring for health risk assessment

Risk estimation and risk evaluation in society are often done separately for pollutants in ambient air, water, food and industrial air. The need for evaluating total exposure is pointed out. Ongoing international programs are referred to. Biological monitoring in combination with environmental monitoring constitutes a promising step towards an integrated exposure monitoring for health risk assessment. The rationale for such an approach is discussed. The need of monitoring not only single substances but a combination of substances is exemplified. A strengthening of the basic research in related fields will widely increase future possibilities for health-related surveillance.     

Long-term monitoring for environmental change in U.S. National Parks a watershed approach

The U.S. National Park Service (NPS) is faced with direct questions about the condition of Park natural resources. The watershed approach to long-term monitoring of natural, and remote areas within the National Parks has provided important data for detecting both spacial and temporal changes in environmental conditions. These data collections allow the partitioning of cause and effect relationships of ecological change within a given watershed. They also serve to meet both reference and early warning objectives. Success in advancing a number of acid precipitation goals has demonstrated the usefulness of these integrated watershed data for inter-ecosystem comparison and for analogy between watersheds. The watershed program owing to the NPS experience is proposed as a model for focusing the National Park Service's inventory and monitoring program inititiative. This approach provides to park researchers and resources managers the needed tools for dealing with today's complex local, regional and global natural resources issues.     

River habitat monitoring and assessment in Germany

Whereas assessing the biological and chemical quality of water is a standard environmental procedure in many countries, the use of habitat survey methods that assess the ecomorphological quality of rivers is relatively new. In Europe, the EC Water Framework Directive requires such assessment from all EU Member States. In Germany, the first river habitat assessments were introduced in the late 1990 s. Each federal state develops its own river habitat map using the 'On-site Survey' and/or the 'Overview Survey'. The assessment describes the difference of the actual condition from a previously defined reference condition. In practice, a defined 'potential for restoration', a more realistic condition, makes restoration activities much easier and more successful. In Germany, the first River Habitat Map 2001 was published in 2002. The survey covered 33,000 km of river length, which equates to 10% of all rivers. A wide range from 'Undisturbed' (class 1) to 'Totally Disturbed' (class 7) river units exists; 77% of them are 'Clearly Disturbed' (class 4) or in worse condition. These result reflects extensive anthropogenic impact on the environment in general, but also past intense technical river 'improvements' that focused on the protection of settlements and traffic routes from flooding, better shipping conditions, the use of water power, and drainage of floodplains for agriculture and urban development. For comparability of survey results between EU Member States, a harmonization of national survey methods is in progress. A crucial point here is the definition of the reference condition for each river (near-natural conditions), since it influences the survey results.     

Guidelines for evaluating selenium data from aquatic monitoring and assessment studies

It is now possible to formulate diagnostic selenium concentrations in four distinct ecosystem-level components; water, food-chain, predatory fish (consuming fish or invertebrate prey), and aquatic birds. Waterborne selenium concentrations of 2 µg/l or greater (parts per billion; total recoverable basis in 0.45 filtered samples) should be considered hazardous to the health and long-term survival of fish and wildlife populations due to the high potential for food-chain bioaccumulation, dietary toxicity, and reproductive effects. In some cases, ultra-trace amounts of dissolved and particulate organic selenium may lead to bioaccumulation and toxicity even when total waterborne concentrations are less than 1 µg/l.Food-chain organisms such as zooplankton, benthic invertebrates, and certain forage fishes can accumulate up to 30 µg/g dry weight selenium (some taxa up to 370 µg/g) with no apparent effect on survival or reproduction. However, the dietary toxicity threshold for fish and wildlife is only 3 µg/g; these food organisms would supply a toxic dose of selenium while being unaffected themselves. Because of this, food-chain organisms containing 3 µg/g (parts per million) dry weight or more should be viewed as potentially lethal to fish and aquatic birds that consume them.Biological effects thresholds (dry weight) for the health and reproductive success of freshwater and anadromous fish are: whole body=4 µg/g; skeletal muscle=8 µg/g; liver=12 µg/g; ovaries and eggs=10 µg/g. Effects thresholds for aquatic birds are: liver=10 µg/g; eggs=3 µg/g. The most precise way to evaluate potential reproductive impacts to adult fish and aquatic bird populations is to measure selenium concentrations in gravid ovaries and eggs. This single measure integrates waterborne and dietary exposure, and allows an evaluation based on the most sensitive biological endpoint. Resource managers and aquatic biologists should obtain measurements of selenium concentrations present in water, food-chain organisms, and fish and wildlife tissues in order to formulate a comprehensive and conclusive assessment of the overall selenium status and health of aquatic ecosystems.     

Integrating classification and regression tree (CART) with GIS for assessment of heavy metals pollution

The classification and regression tree (CART) model integrated with geographical information systems and the assessment of heavy-metals pollution system was developed to assess the heavy metals pollution in Fuyang, Zhejiang, China. The integration of the decision tree model with ArcGIS Engine 9 using a COM implementation in Microsoft® Visual Basic 6.0 provided an approach for assessing the spatial distribution of soil Zn content with high predictive accuracy. The Zn concentration classes estimated by CART assigned the right classes with an accuracy of near 90%. This is a great improvement compared to the ordinary Kriging method for the spatial autocorrelation of the study area severely destroyed by human activities. Also, it can be used to investigate the inter-relationships between the heavy metals pollution and environmental and anthropogenic variables. Moreover, the research presents model predictions over space for further applications and investigations.     

Integrating community perceptions and cultural diversity in social impact assessment in Nigeria

The Environmental Impact Assessment (EIA) Act of 1992 aimed to make the environment a central theme in development in Nigeria. Nevertheless, the extent of engagement with local cultures in the Nigerian EIA process is not statutorily guaranteed. While most EIAs in Nigeria have been for oil and gas projects in the Niger Delta, and have focused strongly on the biophysical environment, socio-economic and cultural aspects have remained marginal. The palpable neglect of community perceptions and cultural diversity in social impact assessment (SIA) in this region prone to conflict has tended to alienate the people in the decision-making process. Thus, despite claims to compliance with regulatory requirements for EIAs, and numerous purported sustainable development initiatives by international oil companies (IOCs), the region continues to face multiple sustainability challenges. This paper situates local perceptions and cultural diversity in participatory development and canvasses the integration of community perceptions and cultural diversity into SIA in the Niger Delta region. It is argued that doing this would be critical to ensuring acceptance and success of development actions within the context of local culture while also contributing to sustainable development policy in the region.     

Source and risk assessment of PCBs in sediments of Fenhe reservoir and watershed, China

The concentrations of polychlorinated biphenyls (PCBs) in sediments from the Fenhe reservoir and watershed were detected at 28 sites in wet and dry seasons. The ∑(123)PCBs ranged from n.d. to 126.49 ng g(-1) dw. The dominated congeners were tri-PCBs (34.29%) and tetra-PCBs (24.05%). In the Fenhe reservoir, ∑(123)PCBs presented a decreasing trend, while percentages of low chlorinated congeners showed an increasing trend. For the temporal variations, PCBs homologues profiles of sediment samples and spatial distribution of ∑(123)PCBs for the two periods were similar (with CD = 0.021 and r(2) = 0.999 respectively), although PCBs concentrations in the wet season were significantly higher than in the dry season. PCA was applied to analyze the possible sources for PCBs, suggesting that PCBs might be mainly influenced by Aroclor 1016 and 1242. Compared with 3 established sediment quality guidelines, levels of PCBs in sediments of the investigated watershed might have a potential biological impact, especially in the wet season.     

Structuring expert input for a knowledge-based approach to watershed condition assessment for the Northwest Forest Plan, USA

Assessments of watershed condition for aquatic and riparian species often have to rely on expert opinion because of the complexity of establishing statistical relationships among the many factors involved. Such expert-based assessments can be difficult to document and apply consistently over time and space. We describe and reflect on the process of developing a computer-based decision support application from expert judgments for assessing aquatic and riparian conditions over the 100,000?km² managed by the US federal government under the Northwest Forest Plan. The decision support system helped structure and document the assessment process and provided consistency and transparency to the evaluation methodology. However, many decisions and trade-offs were required in the expert engagement and model-building processes. Knowledge elicitation in an interactive group had a number of benefits over nominal group or Delphi processes, but efficient knowledge capture required considerable planning and expertise in the subject matter and modeling process. Communicating model results for validation was problematic and only effectively accomplished via in-person workshops. The choice to use different expert groups for each biophysical province provided more opportunities for participation and promoted greater ownership in the assessment, but it also led to increased variation among the resulting model structures. We propose three possible approaches for better managing the consistency of assessment models when multiple expert groups are involved.     

Cumulative impact assessment in environmental planning: A coastal wetland watershed example

Several theoretical, analytical, and institutional difficulties have impeded the development and application of the assessment of cumulative environmental impacts. Watershed development on coastal wetlands offers an ideal context for evaluating the land disturbance target approach to cumulative impact assessment. A model land use planning system involving a time series approach was developed for Elkhorn Slough in California. The approach included four major components: evaluation of erosion susceptibility, measurement of land disturbance, establishment of a land disturbance target, and a comparison of existing and target land disturbance values. Further research is needed to test the transferability of the approach in a wide range of coastal watersheds and to verify the applicability of the methods to other cumulative impact problems.     

Indices for assessment and monitoring of large mammals within an adaptive management framework

Many development projects intended to exploit natural resourcesare occurring in fragile ecosystems, and therefore the need forsound biodiversity assessment and monitoring programs is growing.Large mammals are important components of these fragile ecosystems, yet there are few strategies that attempt to assess and monitor entire large mammal communities in relation to development projects. We propose the use of two indices applied within a framework of adaptive management. An occurrence indexassesses the composition and distribution of large mammals at a site, and an abundance index monitors the abundance of large mammals over time in relation to development. We discuss the design, applicability and effectiveness of these indices based onour experience with a natural gas development project in the Amazon forests of southeastern Peru.     

A framework for assessment and monitoring of arthropods in a lowland tropical forest

By applying principles of adaptive management, and by using the valuable information that arthropods provide from assessment and monitoring programs, managers can identify and reduce possible impacts on biodiversity in development projects. In 1996, the Smithsonian Institution's Monitoring and Assessment of Biodiversity program worked together with Shell Prospecting and Development Peru to establish an adaptive management program to protect biodiversity in a natural gas exploration project in a Peruvian rainforest. In this paper, we outlined the conceptual steps involved in establishing an assessment and monitoring program for arthropods, including setting objectives, evaluating the results and making decisions. We also present the results of the assessment using some of groups of arthropods, and summarize the steps taken to identify appropriate groups for monitoring.     

The assessment of biomarkers in sentinel cattle for monitoring vanadium exposure

Various potential biomarkers were sampled for vanadium every 3-4 months from Bos indicus beef cattle farmed extensively immediately adjacent (high exposure (HE) group) and two km away (low exposure (LE) group) from a vanadium processing plant, respectively. Vanadium intake (mg vanadium kg(-1) bwt d(-1)) was modelled using environmental and physiological data as inputs. The vanadium intake ranged from 0.57 to 5.44 mg vanadium kg(-1) bwt d(-1) in the HE group and 0.41 to 2.61 mg vanadium kg(-1) bwt d(-1) in the LE group over a five-year period of monitoring. Samples collected from live sentinel animals over the five-year period included caudal coccygeal vertebrae, tail-switch hair, milk, urine, faeces, rib-bone biopsies and a wide range of blood clinical pathology and haematological parameters. The data was analysed for differences in response between the HE and LE groups. Where differences were found, a linear mixed-effects regression model was fitted to model the relationship between the exposure dose and the response variable. The model included the effects of age, duration of exposure and response, and allowed the prediction of the exposure dose given these inputs. Moreover, forty-two adult cattle were slaughtered over the five years. A wide range of tissue samples, rumen content and whole blood were taken from the cattle at slaughter for vanadium determination. In live animals, a difference in response was found between the HE group and LE group with respect to serum albumin (n = 36), monocyte (n = 36) and thrombocyte (n = 36) counts, and hair (n = 2) and faeces (n = 34) vanadium concentrations. No difference in vanadium concentrations could be shown for urine (n = 36), the traditional occupational health biomarker. Regression models are described for serum albumin, monocyte counts, faeces and hair, which showed the most promise as biomarkers. Average concentrations of vanadium in the tissues of slaughtered cattle ranged from 0.08 to 2.94 mg kg(-1) (wet-weight basis) and rumen content contained 16.67 mg kg(-1). Significant correlations were found between the exposure dose (end-dose) just prior to slaughter and the concentrations of vanadium in the coccygeal vertebrae, liver, diaphragm and rib-bone in descending order of magnitude. Other tissues showed poor correlation to the end-dose. Tissue levels of vanadium in healthy cattle include a much wider range than is currently reflected in the literature. The best tissue from slaughter animals for assessing chronic vanadium exposure is probably the liver.     

Risk assessment and monitoring of dinotefuran and its metabolites for Chinese consumption of apples

Residues of dinotefuran and its metabolites, 1-methyl-3-(tetrahydro-3-furylmethyl)urea (UF) and 1-methyl-3-(tetrahydro-3-furylmethyl)guanidine (DN), in apple were investigated using a “QuEChERS” (quick, easy, cheap, effective, rugged, safe) pretreatment and liquid chromatography–tandem mass spectrometry. Limits of detection (LODs) and quantification (LOQs) of dinotefuran, UF, and DN in apples were 0.011–0.960 and 0.037–3.200 μg/kg, respectively. The average recoveries of dinotefuran, UF, and DN in apple ranged from 70.0 to 83.6% with relative standard deviations less than 13%. A formulation of 20% water-dispersible dinotefuran granules was sprayed at 1–1.5-fold the recommended dose 3–4 times on apple trees. Total terminal residues of dinotefuran in apple were less than 2 mg/kg, which is the maximum residue limit (MRL) set by Japan. When following the recommended application guidelines, dinotefuran is unlikely to present significant health concerns to the Chinese population because the risk quotient (RQ) is less than 100%. This work could provide guidance for the safe use of dinotefuran and serve as a reference for the establishment of a maximum residue limit of dinotefuran in apple in China.     

河流水质综合评价方法的统一和改进

在分析我国河流水质综合评价方法存在的问题以及河流水质综合评价方法研究现状的基础上 ,以国家对全国水环境质量系统管理需要为目的 ,提出了对河流水质综合评价方法的要求 ,并针对综合污染指数法的缺陷 ,提出了改进的综合水质指数方法     

Towards a green and fast production system: Integrating life cycle assessment and value stream mapping for decision making

Integrating environmental commitment to manufacturing concerns seems unavoidable towards a more sustainable conduct. In the contemporary scenario, Value Stream Mapping (VSM) has been bringing new perspectives into companies' economics, improving production performance, whereas Life Cycle Assessment (LCA) has been the most complete tool for environmental assessment. Therefore, the present study aims to propose a model based on the integration of LCA and VSM to improve environmental and manufacturing aspects of organizations, the LCA-VSM model. Possible spots for integration, overlaps between LCA and VSM and potential gains were identified. The LCA-VSM model provides a simple tool for prioritizing action measures to improve the environmental-economic performance, and unlike many existing methods, it encourages continuous improvement instead of a one-off approach. The company where a case study was conducted to test the LCA-VSM model is a manufacturer of tools and painting materials for the civil construction sector. The use of the proposed model guided actions that decreased from 5% to 15% of environmental impacts (across nine impact categories), and reduced both non-value adding (lead time went from 103.26 to 24.01 days) and value adding (cycle time went from 35.7 s to 33.75 s) time. The main contribution of this paper is providing a structured approach to a practical integration of LCA and VSM towards decision making, prioritizing action measures based on the following criteria: environmental preference, economic feasibility, and ease of implementation, aiding more eco-efficient practices.     

A corporate approach to social monitoring and assessment for development in a fragile environment

The prevailing corporate trend regardingdevelopment of energy resources in the tropics emphasizesfinancial gain over long-term societal benefits. Somecorporations are beginning to find a competitive advantage linkedto proactive relations with host communities and adequateprotection of fragile ecosystems. Herein, we describe a casestudy where an international energy production company workedwith stakeholders to achieve social capital and sustainabledevelopment. The strategies aimed to strengthen local capacity toimprove social welfare and to ensure conservation and wise use ofbiodiversity. We provide examples, discuss lessons learned andmake recommendations for future development projects.     

监测和评价浑江水质的底栖动物指标体系研究

在浑江六个断面采集到底栖动物(4门、6纲、12目、34科、57属)84种,列出了相关名录。通过运用描述对比法、指示生物法、生物指数法对浑江采样水体的水质进行了底栖动物学综合评价。在此基础上建立了监测和评价浑江水质的底栖动物指标体系,并探讨了河流水体污染生态学中的底栖动物与水质状况的相关性和对水质状况的指示性及利用该体系监测评价浑江水质的实用性。     

A framework for assessment and monitoring of small mammals in a lowland tropical forest

Development projects in tropical forests can impact biodiversity.Assessment and monitoring programs based on the principles of adaptive management assist managers to identify and reduce suchimpacts. The small mammal community is one important component ofa forest ecosystem that may be impacted by development projects. In 1996, a natural gas exploration project was initiated in a Peruvian rainforest. The Smithsonian Institution's Monitoring andAssessment of Biodiversity program cooperated with Shell Prospecting and Development Peru to establish an adaptive management program to protect the region's biodiversity. In thisarticle, we discuss the role of assessing and monitoring small mammals in relation to the natural gas project. We outline theconceptual issues involved in establishing an assessment andmonitoring program, including setting objectives, evaluating the results and making appropriate decisions. We also summarizethe steps taken to implement the small mammal assessment, provideresults from the assessment and discuss protocols to identifyappropriate species for monitoring.     

An assessment and monitoring program for birds in the Lower Urubamba region,Peru

We developed an assessment and monitoring plan for birds in connection with the exploration and potential development of a large natural gas field in the Lower Urubamba drainage of Peru, a project of Shell Prospecting and Development Peru (SPDP). Our objectives were to: (1) inventory the birds in the area, including information on habitat use and abundance, and (2) devise long-term monitoring protocols for birds. We sampled birds through a combination of visual and auditory surveys and mist-netting at 4 well sites and 3 sites along the Urubamba and Camisea rivers. We recorded 420 speciesduring 135 days of field work. We consider the highest prioritiesfor a future monitoring program to be: (1) establish whether edge effects are occurring at well sites, along roads and alongthe planned pipeline route and determine the significance and extent of these effects and (2) assess the impact of increased human access to the area on game and other exploited species. The remoteness of the area, its rugged terrain and dense vegetation and the lack of trained personnel limit the choice of survey and monitoring methods. We recommend use of mist-netting and transects for monitoring edge effects and useof transects for monitoring game and other exploited species.