Copper recycling and scrap availability

According to existing estimates, available old copper scrap has more than tripled over the past 40 years. Secondary production (that is, copper produced from recycling old scrap), however, has only doubled. Indeed, over the past 10 years, while copper consumption and primary production have continued to expand briskly, while available old scrap has increased by over 35%, secondary production has actually stagnated.For a world concerned with sustainable development and the quality of the earth's environment, this performance is disappointing and in need of explanation. Other things being equal, one would expect the amount of recycling to increase with the availability of scrap, as many econometric models of the world copper market developed over the past several decades explicitly assume.The key to understanding sluggish growth in secondary production, this paper argues, is distinguishing carefully between (1) the flow of old scrap that arrives each year from products reaching the end of their useful lives during the year and (2) the available stock of old scrap that was not recycled during earlier years presumably because it was too costly to do so. Using an econometric model, the paper shows that old scrap stocks, which have contributed most of the increase in available old copper scrap over the years, have a very modest impact on secondary production. Old scrap flows have a much greater effect, but they account for only about 4% of the available old scrap for any given year.     

Precipitation of liquid swine manure phosphates using magnesium smelting by-products

Swine manure contains considerable amounts of total (P) and soluble phosphorus (PO(4)-P) which may increase the soil P content when applied in excess to crop requirements and, consequently, risk water eutrophication. The feasibility of using magnesium (Mg) from the by-product of electrolysis and foundries (BPEF) for the removal of P from liquid swine manure was studied by adding up to 3 g of Mg as BPEF per liter of nursery (NU) and grower-finisher (GF) swine manure in 25-L plastic buckets. Changes in P and other elements were monitored for up to 360 h. Small amounts of Mg as BPEF (0.5 and 1.0 g Mg L(-1) manure) reduced the total P concentration of the liquid fraction by 70 to 95% of both manure types with respect to the control treatment of mixed raw manure. A settling period of 8 h or more was necessary to significantly reduce the liquid fraction's total P concentration for both manure types. Reduction of PO(4)-P varied from 96 to 100% in the liquid fractions for both manure types, which along with natural settling, explains most of the total P reduction in that fraction. The addition of BPEF did not influence the N content of manure. The low P liquid fraction can be safely applied to saturated P soils whereas the high P solid fraction offers the opportunity of transporting manure to agricultural soils deficient in P. Since N is conserved, both liquid and solid fractions could be valuable fertilizer manure by-products.     

Copper resource appraisal

Data are presented indicating the availability of copper from domestic sources in the US—what quantity can be produced and when and at what price. Included are supply and demand data, production methods and costs, geographic location of deposits in the US, by-product relationships and some problems affecting the industry.     

Copper Overcapacity and the Adjustment Process

This article analyses overcapacity in the world copper industry during the 1980s and reviews projections of mine capacity to 1990 and 1996 by the research staffs of the World Bank, the International Wrought Copper Council, and the Intergovernmental Council of Copper Exporting Countries. The process of restoring demand-supply balance in the copper industry is analysed under alternative assumptions for rates of growth in world consumption and certain conclusions are reached on the implications for copper prices during the 1990s.     

Long-run Price Prospects for Aluminium and Copper

The meaning and significance of alternative price quotations in the aluminium and copper markets are scrutinized. The history of aluminium and copper prices from the beginning of this century is surveyed. The causes to the fast fall in real aluminium prices until 1950, and to the exceptionally high copper prices between 1964 and 1974 are explained. A methodology for long-run price forecasting in metals markets is developed. This methodology, combined with appropriate empirical data and reasonable assumptions about such key factors as taxation, depletion, and energy costs, is used to forecast the prices of aluminium and copper until the end of this century. L'article étudie le sens et les conséquences des différents cours des marchés de l'aluminium et du cuivre. II fait l'historique des prix de l'aluminium et du cuivre depuis le début de ce siècle. II explique les causes de l'effondrement des cours de l'aluminium en prix constants jusqu'en 1950 et les cours exceptionnellement élevés du cuivre entre 1964 et 1974. L'article présente une méthodologie pour la prévision à long terme de l'évolution des marchés des métaux. Cette méthodologie, combinée avec des données empiriques adéquates et des estimations raisonnables portant sur des facteurs clefs tels que la taxation, la provision pour reconstitution de réserves et les coûts de l'énergie, est utilisée pour prévoir les prix de l'aluminium et du cuivre jusqu'à la fin du siècle. El significado e importancia de la fluctuación de precios en el mercado de cobre y aluminio se analiza en este artículo. Se revisa la variación histórica de los precios de cobre y aluminio desde el comienzo del siglo. Se explican las causas de la caída ràpida en términos reales de los precios de aluminio hasta 1950 y los precios de cobre excepcionalmente altos entre 1964 y 1974. Se desarrolla luego una metodología para el pronóstico a largo plazo de la demanda de metales. Esta metodología. conjuntamente con datos empíricos apropiados, asunciones razonables acerca de factores claves tales como impuesto, agotamiento de la mina y precios de energía, se emplea para pronosticar los precios de cobre y aiuminio hasta el final del siglo.     

铜矿区几种菊科植物的重金属含量测定

对生长在铜陵铜官山矿区的5种菊科植物,小飞蓬、艾蒿、野艾蒿、苍耳、山苦荬进行了重金属含量测定,并测定了其根部土壤中的重金属含量.结果表明,苍耳的地下部分含铜量最大,为51.28-95.35 mg/kg;山苦荬的地下部分含铜量最小,为15.44-16.60 mg/kg;苍耳体内这4种重金属的含量均较高,具有较强的吸收和富集能力.小飞蓬、艾蒿和野艾蒿样品中的重金属含量没有苍耳高,但由于这几种植物对铜有较强的转运能力,且在矿区恶劣的自然条件下仍能大量生长,所以也可作为矿区生态修复的选择物种.     

Copper in India: Present and future outlook

The availability of mineral resources plays an important role in India's national economy. Copper, one of the important non-ferrous metals, has various industrial uses and demand for it is increasing in India where the inventory and production of copper, though not comparable with developed countries, shows an impressive growth rate, particularly during the last decade. With an increasing rate of industrial production envisaged in future plans copper consumption is expected to rise. Logistic curves have been used to study the potential long-term production capability under the dynamic concept of reserves and resources, with curves drawn for various estimates of total available resources. The production figures shown are not final and are subject to change due to a number of factors. This approach merely provides a method for projecting trends in future production.     

Sewage sludge as organic ameliorant for revegetation of fine bauxite refining residue

The rise in aluminium demand in the world has significantly increased the generation of bauxite residue which occupies huge areas of land worldwide. Direct revegetation of residue storage areas has been unsuccessful because of the high alkalinity and salinity, and poor nutrient contents of the fine residue (red mud). This paper describes glasshouse and field experiments evaluating the potential use of sewage sludge as an organic ameliorant for gypsum amended red mud. The growth of Agropyron elongatum in red mud receiving gypsum (0 and 38.5 t ha⁻¹) and sewage sludge (0, 38.5 and 77 t ha⁻¹) amendment was assessed in a glasshouse study. Leachate and soil analyses revealed that gypsum was effective in reducing the pH, EC and ESP of red mud, while sewage sludge gave additional reductions in EC, Na and ESP. No evidence of any significant increases in heavy metal contents were observed in the leachates following sewage sludge amendment. However, soil Al contents were more available in red mud receiving only sewage sludge treatment. Sewage sludge amendment significantly increased dry weight yield and provided sufficient nutrients for plant growth except K which was marginal. No heavy metal accumulation was observed in Agropyron. Following that, a field experiment was performed having red mud amended with sewage sludge (38.5, 77 and 154 t ha⁻¹) and gypsum (38.5 and 77 t ha⁻¹) to evaluate their effects on soil physical properties of red mud. Sewage sludge significantly reduced soil bulk density (25%) and particle density (9%) and increased the total porosity of red mud (8%). Hydraulic conductivity also increased from 1.5 to 23 × 10⁻⁵ m s⁻¹. Plant cover percentage and dry weight yield of Agropyron increased with an increase in gypsum and sewage sludge amendment. The results confirm that sewage sludge is effective in improving both soil structure and nutrient status of gypsum amended red mud. The use of sewage sludge for red mud revegetation provides not just an option for sludge disposal, but also a cost effective revegetation strategy for bauxite refining industry.     

Copper: after the boom

Copper demand is expected to turn down in the latter part of 1989 and then dip further in 1990. The slump in demand is expected to be modest, however, much less severe than the post oil shock recessions of the mid-1970s and early 1980s. By 1991 a healthy growth is expected to resume. However, major expansions to production capacity are in track and excessive production is expected to keep the copper market in surplus for the next five years. Thus, prices are expected to decline sharply and remain at quite low levels through the mid-1990s.     

Copper and calcium transport through an unsaturated soil column

To determine the relative importance of the physical and chemical factors that influence the movement of heavy metals through soils, leaching experiments were carried out under conditions of constant molarity during unsaturated steady-state water flow through a Manawatu fine sandy loam (a Dystric Fluventic Eutochrept). The movement and exchange of copper was studied in a binary Cu-Ca system. The movement of the associated anions, namely chloride and sulfate, was also monitored. The measurements were compared with predictions from the convection-dispersion equation (CDE), linked with cation exchange theory. The agreement between the measured and predicted breakthrough of sulfate and copper was good. This indicates that copper retardation in the Manawatu soil is closely related to the cation exchange capacity, and that exchange between Ca and Cu is the main process of Cu retardation in the Manawatu soil. However, copper appeared slightly later in the effluent than predicted, indicating that non-exchange processes are also involved in copper transport. Measurements of suction cups could also be used to obtain the parameters for the CDE to describe sulfate movement through the soil. Time domain reflectometry (TDR) measurements of the bulk-soil electrical conductivity could be used to monitor the movement of both sulfate and copper. This indicates that TDR can also be used to monitor cation transport and exchange through the soil, provided the percolating solution causes a sufficient change in the electrical conductivity.     

鲫鱼对铜和锌的吸收蓄积研究

用原子吸收分光光度法研究铜和锌在鲫鱼体内积累行为,结果表明,溶解态和颗粒态铜和锌在鱼鳃、肌肉中的积累量随其浓度的增加而增加。铜和锌积累能力的大小顺序为锌〉铜。鱼鳃和肌肉对溶解态和颗粒态重金属的积累能力为鱼鳃大于肌肉,蓄积曲线表现为逐渐趋向平缓的形式。颗粒态鱼鳃积累尤其大于肌肉,说明鱼在对颗粒态铜和锌的积累过程中,部分颗粒态金属是吸附在鱼鳃上的。由于生理功能不同,鲫鱼对锌需要量比铜多。     

Industry to Industry By-products Exchange Network towards zero waste in palm oil refining processes

This paper presents a systematic framework for optimal utilization of by-products generated during crude palm oil refining processes. Three by-products are considered in the supply chain network: soapstock, palm fatty acid distillate (PFAD) and spent bleaching earth (SBE). These by-products, generated from neutralization, deodorization and bleaching processes, are viable feedstocks to other commercial industries such as animal feed, biodiesel, lubricant and soap. The case study is formulated as Mixed Integer Linear Programming (MILP) and integrated into the framework with the objective to maximize the refinery's profit as well as moving towards a conscious mindset of zero waste. This is the first time that such framework is developed and applied for the palm oil industry. The framework is called as Industry to Industry By-products Exchange Network (I2IBEN). An illustrative case study demonstrates a significant potential profit of MYR182, 893 per month.     

人尿中痕量铜的分光光度测定

本文采用自己合成的水溶性卟啉Ｔ（４－ＴＡＰ）Ｐ作试剂，在ｐＨ４５，盐酸羟胺存在下，建立了一种测定人尿中痕量铜的分光光度法，操作简便，结果准确，令人满意。     

Addressing criticality for rare earth elements in petroleum refining: The key supply factors approach

The group of elements known as the rare earth elements (REEs) is comprised of the 15 lanthanides. REEs are used in a number of technologies including catalysts for automobiles and petroleum refining, magnets for wind turbines and defense technologies, and phosphors in lighting and computer and TV screens. REEs are actually quite abundant in the earth′s crust. The elements are deemed “rare” because they are found in low concentrations and are difficult to extract economically. China holds 48% of the global REE reserves, and until 2012, production of REEs was almost exclusive to China. Over the past decade, China has been steadily decreasing its REE export quotas, reducing the supply of REEs available to the rest of the world. REEs are considered critical materials according to the National Science and Technology Council, which defines critical elements as those serving an essential function in the manufacture of a product, the absence of which would cause significant social consequence. Thus, it is extremely important for consumers of REEs to be aware of and understand the risks facing the supply REEs, as awareness is the first and most important step in developing strategies to mitigate risk. This report presents a mechanism for identifying the risks present in a supply–demand scenario and determining the criticality of an individual rare earth element under specific circumstances.